Microsoft Wireless Laser Mouse 5000' now works' back (vertical) - how can I fix it?
I had the same Microsoft Wireless Laser Mouse 5000 for a few years (using Vista) and all of a sudden today, it is backwards (vertical) - can I use it, but it's clumsy - suggestions - I tried to restart, disconnection, battery change, etc..
I turned the mouse around - but the horizontal then runs in the background! Any ideas out there? Thank you...
Ideas:
You have problems with programs
Error messages
Recent changes to your computer
What you have already tried to solve the problem
Hi teach007,
1. did you of recent changes on the computer?
2 when was the last time it was working fine?
See the Microsoft articles below and try the steps mentioned them, check if it works.
Troubleshoot a wireless mouse that does not correctly
http://support.Microsoft.com/kb/321122
Troubleshoot the incidents of the response to the mouse or wireless keyboard
http://support.Microsoft.com/kb/838398
I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
Tags: Windows
Similar Questions
-
Microsoft Wireless Laser Mouse/Keyboard Version 2.0/3.0
Hello!
I was wondering if I can use my v2.0 USB Microsoft 2.4 GHz TRANSCEIVER that works for my keyboard Microsoft Wireless Laser V3.0 and my Microsoft Wireless Laser mouse V2.0 work for my other keyboard and mouse because I lost the transmitter/wireless receiver I had to for use. Anyway, the keyboard is called: Microsoft Wireless Laser Keyboard 6000 v2.0 and mouse is called: Microsoft Wireless Laser Mouse 6000 (there is no version on that). Also, if I can't use the USB with my keyboard and mouse, I was wondering if someone could fix my mouse? My mouse will not move. I move the mouse and my clicker or this thing won't pass. And then sometimes I can just click on it! Please help on these two problems. Thank you very much!!! (:Hello
For Microsoft hardware related issues, you can have a look at this link:
http://www.Microsoft.com/hardware/en-us/support/troubleshooting
-
Bluetooth Stack for Windows by Toshiba with Microsoft Wireless Laser Mouse 8000
I use the battery Bluetooth for Windows by Toshiba - Version v5.10.01 (T) and I am trying to connect to my Microsoft Wireless Laser Mouse 8000. But the Bluetooth stack does not even see the mouse.
It only works with the dongle... but I don't want to use a dongle when I already have Bluetooth installed in my laptop.
Any suggestions appreciated
Hello
Before starting any discussion can you please tell us which laptop model you have?BTW: What is your BT mouse has own dongle BT?
See also http://aps.toshiba-tro.de/bluetooth/pages/faq/keyboardnotworking.html
Good bye
-
Wireless Laser Mouse 5000 Windows 7 64-bit installation challenge
Wireless Laser Mouse 5000 Windows 7 64-bit installation challenge continues to get customer assistance contact support when you try to load the software to control the mouse buttons and the speed of response.
Suggestions?
Hi OrlandoM,
Using the latest 64-bit drivers? Visit the Microsoft Hardware site and download the latest 64-bit driver software:
http://www.Microsoft.com/hardware/download/download.aspx?category=MK
This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.
John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: Web:http://www.winuser.co.uk; Web: http://xphelpandsupport.mvps.org; Web: http://vistasupport.mvps.org; Web: http://www.silversurfer-guide.com
-
install Microsoft wireless laser mouse 6000
Hi, I bought used ms laser 6000 wireless mouse, this one: http://www.microsoft.com/hardware/en-us/d/wireless-laser-mouse-6000 and now I can't find it on the bluetooth on my laptop, I have Bluetooth v2. The mouse requires installing with usb receiver or is it regular bluetooth mouse like those of ebay, you can buy?
I don't have a usb mouse with receiver and I thought it's ok because it should work on the bluetooth connection, but I can not connect, bluetooth it will not identify not even with the 'Connect' button on the mouse. the mouse works because the laser light is on.It is not a Bluetooth mouse. This is a RF mouse and requires the receiver supplied with the mouse.
-
Microsoft wireless laser mouse 8000__
I have a microsoft 8000 wireless laser mouse. the problem is that when I put it on the charger it flashes green for about a minute, then he made a flashing red fast. If anyone can tell me what is the problem I would really appreciate it. Thank you a_trekker
I have a microsoft 8000 wireless laser mouse. the problem is that when I put it on the charger it flashes green for about a minute, then he made a flashing red fast. If anyone can tell me what is the problem I would really appreciate it. Thank you a_trekker
Hello
http://www.Microsoft.com/hardware/mouseandkeyboard/ProductDetails.aspx?pid=084
battery empty? or not connected? DoD you have intellipoint 7?
have a nice day [url] [color = blue] www.microsoft.com/security download and install updates from Microsoft Update security! [/ Color] [url] [url] http://windows.microsoft.com/en-US/windows-vista/help/using [color = blue] Windows Vista: Top Solutions [/ color] [url] [url] http://www.windowslive.com/HowItWorks [color = green] how to use Windows Live [/ color] [url] [url] [color = blue] http://windows.microsoft.com/en-US/windows/help Windows Help & how-to [/ color] [url] [url] http://windows.microsoft.com/en-us/windows-vista/help/top-solutions [color = blue] Windows Vista: Top Solutions [/ color] [url] [url] http://www.microsoft.com/windows/internet-explorer/default.aspx [color = green] Internet Explorer 8 : Homepage [/ color] [url] [url] http://windows.microsoft.com/en-US/windows/help/internet-explorer?browser=ie8 [color = blue] Internet Explorer Help home [/ color] [url]
-
My wireless connection keeps cutting at some point. How can I fix?
My wireless connection keeps cutting to 00:30 every night and comes back at 06:00. However it does not with other devices that have no problem with the internet during these periods. I have no problems with previous routers. When I lose the connection to 00:30, it is said that the wireless network is always available, but it cannot connect. If I press on diagnose and repair, it is then said that the security code is incorrect, then I put in the correct WPA code and he says he is still a problem and can not connect. Does anyone know how can I fix?
Hello
It could be that at the end of the lease of the IP address of the router.
Check the configuration of the router and make sure the IP lease is set to stay alive (or for an extended period of time).
-
Wireless Laser Mouse 5000 model 1387
Just bought the Microsoft Wireless Desktop 3000 with the mouse model 1387. Keyboard seems to work very well. It's the mouse. Sometimes it is smooth as silk, yet most of the time it's jerky in motion; hesitate; or just moves very slowly. The dongle is about 2 feet away. I just downloaded the latest version of IntelliPoint (8) and still the same problem. Can I make before returning to the title of the warranty period?
Hi McMar
Method 1:You can refer to the link below and make sure you have the latest version of the software installed-
http://www.Microsoft.com/hardware/en-us/d/wireless-desktop-3000
You can also view the Microsoft article provided below and check if the steps to help you.http://support.Microsoft.com/kb/838398
Method 2:If the problem persists then you can try to contact the Microsoft replacement and check if they can help you further -
http://support.Microsoft.com/kb/326246
I hope this helps.
-
Microsoft wireless mobile mouse 3000 not working not not in Windows 7
Bought a mobile wireless mice from Microsoft for my sons laptop. Worked a lot for 3 weeks and now works doesn't at all. Tried to replace the battery with a new one. Tried to use it on another computer but it still dosen't work. Laptop is a HP new operating system windows 7.
Hi GKWest,
See the article after some troubleshooting for your question:
http://support.Microsoft.com/kb/321122
In addition, just in case:
http://support.Microsoft.com/kb/326246
I hope this helps!
Debra
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
The view of my new sony NWZ - B183F doest folder option work correctly. It do display all the music files and the files are in different folders. How can I solve this problem. How can I update the firmware? The information of the said unit 1.0. Y at - there a new firmware for this product?
Hi Vimal,
You have reached the Support of Sony USA. Unfortunately, we are unable to help customers outside the United States. Please recommend visiting our Sony Global Web site for more information on contacting the Sony's Support centre in your area to http://www.sony.net/SonyInfo/Support/.
Thanks Victor
-
Microsoft Wireless Mobile Mouse 3000 not working not
When I plug the receiver to the USB port (on two different computers) the led green flashes. And in the mouse control Panel category indicates the device is working properly. However, when I put the batteries in the mouse itself, nothing happens. The light flashed red laser several times and then nothing. The light green battery flashed once and went. I tried to change the battery; I tried to push in the little white sign on the bottom of the mouse button several times and nothing happened. The mouse is defective?
Had same problem... fixed it with a correct synchronization as follows:
1 plug the receiver into usb port
2. turn on the mouse by pressing the switch on the bottom
3. with receiving always in usb port, press connect button with pen. (I had to raise my laptop for this). The green light on the receiver flashes now indicate that it is ready for synchronization.
4. If necessary puch cinnect button on the mouse with a pen.
See the video on: http://www.microsoft.com/showcase/en/us/details/df09a00b-81a2-4b46-af7c-ac5c7f467f50 re how synch
-
The mouse does not work normally. How can I solve this problem?
Original title: the arrows will not stop
My arrow right guard spinning. I can work and it stops but then when I stop it goes back to spinning.
What arrow are you talking about?
-
I have Acrobat Pro DC and Windows 10. When you try to make editing comments, I find almost impossible to get the words marked (by rolling on it with the mouse button). The blue highlight climbs around the word to Word or closed unexpectedly after rolling on a single word, even if the mouse button was released.
In addition, now that the strike and replacement tool has been eliminated, you are supposed to perform the same operation on the text to replace and, once the text highlighted blue, simply start typing the new text. It works not. After finally getting the right text marked, I start typing, and nothing happens. I might have to select a tool (for example, strike-out), use and remove the strike-out, before the operation crossed out - replace works again.
I have used earlier versions of Acrobat Pro (on Vista) without such problems.
The problem I described with text selection was not with Acrobat, but rather with a failing wireless mouse. Replacing the mouse seems to have resolved. See erratic mouse, by selecting the problem of text - Logitech Forums
-
my internet explores all of a sudden stops working then restarts, how can I fix
I recntly been havig IE suddenly stops working then restarts itself. My virus scans are clean and I have not downloaded anything new. Any ideas? I got 1blue screen with a view of crash dump.
Hello
Internet Explorer freezes or crashes
http://support.Microsoft.com/GP/ie_freezes_or_crashesTips for solving problems with Internet Explorer
http://Windows.Microsoft.com/en-us/Windows7/tips-for-solving-problems-with-Internet-ExplorerWhen you start Internet Explorer, it opens, flashes and then closes immediately
http://support.Microsoft.com/kb/967896------------------------------------------
Several troubleshooting methods:
What antivirus/antispyware/security products do you have on the machine? Be one you have
EVER had on this machine, including those you have uninstalled (they leave leftovers behind which)
may cause strange problems).If no joy there's something blocking perhaps.
Start - All Programs - Accessories - System Tools - IE with no Addons - what works best?
IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK
IE - Tools - Internet Options - Security tab - click on reset all default areas - apply / OK
Close and restart IE or IE with no addons
not better?
IE - tools - manage Addons (for sure disable SSV2 if she's here, it is no longer necessary but Java
installs and it causes more questions - have you never update Java to go back in and turn it off again.) Search
other possible problems.Windows Defender - tools - software explore - look for problems with programs that do not look
right. Allowed are usually OK and "unauthorized" are not always bad. If doubt about a program
ask about it here.Could not be a free - SpyBHOremover - BHO - standalone program, needs no installation, download.
unzip and run - all are not bad, but some can cause your question (toolbars are BHO).
http://securityxploded.com/bhoremover.phpHow to change, add or remove startup programs in Windows 7
http://www.SevenForums.com/tutorials/1401-startup-programs-change.htmlHow to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlAlso get Malwarebytes - free - use as scanner only.
--------------------------------
For Vista:
Try these to erase corruption and missing/damaged file system repair or replacement.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html--------------------------------
For Windows 7:
Try these to erase corruption and missing/damaged file system repair or replacement.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlThen run checkdisk (chkdsk).
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.htmlI hope this helps.
-
Am just this side of being computer illiterate. You do not know how I did this but have changed all my programs and files to open in Adobe reader, which as you may know... they do not open. I had to go through back doors just opened my internet explore. It becomes a problem. My friend tried to do a restore, as nearly 2 months back and that didn't change anything either. I seriously need some help here!
Hi Mary,
I suggest you to uninstall and reinstall Adobe Reader. Then set the default program for the file accordingly.
Follow these steps to uninstall Adobe Reader software.
a. click the Start button and select Control Panel.
b. Select uninstall a program
c. Select Adobe Reader in the list, and then select Uninstall.
Now download and install the Adobe Reader once more through the following link.
http://get.Adobe.com/reader/otherversions/
Then go into the article to find out how to set default applications.
Change the programs that Windows uses by default
http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default
Let us know the results.
Maybe you are looking for
-
Master password prompt steals focus
I have no problem entering my main password for each session. However, the prompt to the unpredictable times, sometimes I'm in the process of typing something else (IE a URL).Is there a setting anywhere to stop the guest to steal my attention so I ca
-
Re: Display Windows 7 64 bit drivers
just upgraded to windows 7 64 bit on my nb305, but can't find the controller video dirvers tosort display. any tips?
-
I am Rakesh my apple ID is * and my ID apple is locked and I forgot my security questions answers please help me.
-
How to configure isa server 2006
How to configure isa server 2006
-
Failure of the alignment of cartridges HP Officejet g55 all-in-one printer. Please notify. Thank you.