Mobo fried esxi 3.5 on dev server. Customers recoverable?

Similar Questions

• How to install VMWare ESXi on HP integrity rx Server 6600

  I have a VMware-VMvisor-Installer - 5.1.0.update01 - 1065491.x86_64.iso and I have installed successfully on IBM system x 3650 M3.

  But I can not install the HP integrity rx Server 6600 (hp integrity rx 6600 64-bit server, processor intel Itanium 2 1.6 Ghz core).

  Please teach me how to install VMWare ESXi on HP integrity rx Server 6600

  Thank you.

  Hello

  You cannot use ESX / ESXi on Itanium.

  Take a look at these...

  https://communities.VMware.com/message/1491338

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken&javax.portlet.prp_ba847bafb2a2d782fcbb0710b053ce01=wsrp-navigationalState%3DdocId%253Demr_na-c00773159-6%257CdocLocale%253D%257CcalledBy%253D&javax.portlet.tpst=ba847bafb2a2d782fcbb0710b053ce01&sp4ts.oid=3257036&ac.admitted=1379566669455.876444892.199480143

  Kind regards

  Assane

  If you find this useful, mark the answer as correct/useful

• VMWare ESXi 4 as a file server?

  Hello

  Got a server on VMWare ESXi 4, currently with a virtual more to come Linux machine.

  My goal is to use the server as a server from file/place of storage within the network of the company but also to test the environment (this is what I need several virtual machines for).

  My question is: is it possible to use ESXi 4 as a file server separately from the installed virtual machines? Or do I have to use one of the virtual machines as a storage place? If Yes, is there some way I can connect to this storage place WITHOUT using VMWare vSphere (that I currently use to manage the server)? Say, add network drive from Windows on the desktop.

  Those who resembles a fundamental questions for me however I am quite newbie here so I'm not really sure what can be done

  See you soon

  Hello, welcome to the forum

  As far as I KNOW, no, you cannot use VMware ESXi itself as a storage/file server.

  You must use VM in it and this VM should get this service to another customer.

  So you want to use this host (ESXi) as your test environment (put some VM on it to test it), you should pay attention to your bandwidth and the e/s, may be the test VM needs a lot of bandwidth or i/o and if your host may not respond to all virtual machines must (file server and test virtual machines) you will see a low performance.

  If I'm missing something; Please correct me, thank you.

  -= If you have found this note/response useful, please consider awarding points to 'Correct' or 'useful ' = -.

  -= If there is a mistake in my notes, please correct me! =-

  -= Thank you =-

• ESXi on T610 and OpenManage Server Administrator on windows

  Dears

  I have Power edge T610 hosted ESXi 4.1 and I need gale HW on network via OpenManage Server Administrator is installed on the Windows machine, I need to know that it is OK or not:

  If it works: what the user name and password to log on give

  otherwise: how I can eat the server HW

  Moharafa,

  I sent you an email with a detailed itinerary, which you can use to install Open manage with ESXi.

  I would like to know if that's what you're looking for.

• While add ESXi 6 existing hosts, vcenter server 5 std and esxi host 6 cann't add to AD

  Hello

  Greetings. !

  We have seen vCloude 5 Enterprise edition and vCenter Server Standard 5.5

  at the moment all my existing hosts ESXi 5.1 are managing through vCenter Server Standard 5, now recently we buy vCloude 6 Enterprise edition

  (1) I found the following problems all add ESXi 6 hosts (VMware ESXi - 6.0.0 - Update1-3380124- HPE) to AD sales thru of sphere, it is read error.

  

  I have already set up network, DNS, make sure firewall ports, Ping - are all OK.

  (2) Moreover, while trying to create new CD, add the cluster, then add hosts, is giving following error.

  

  I can add new Hosts 06 ESXi Existing vCenter Server 5.5 Standard or I have to buy updated additional license for vcenter server 5 std vcenter 6 standard / enterprise.

  Thanks in advance.

  ESXi 6 cannot be managed by vCenter 5.5 or earlier.

  He needs a same version or higher of vCenter server.

• Cannot use RDP when replace the esx esxi 5.5 4.1 Server

  Hello

  We have a new environment with vsphere 5.5 and device vcentre 5.5 5.5

  I've converted a few VM vsphere 4.1 to vsphere 5.5 there is between two servers that I can not open the RDP session to those servers somewhere else.

  No idea how that can happen? It works fine when I turn the machine on vsphere 5.5 and start again from the old environment vsphere 4.1.

  Thanks in advance...

  Sohrab

  Have you configured VLAN even that you have in your old Web host in your new? Any other server on the same VLAN / subnet works at your 5.5 ESXi host?

• ESXi host bios version and server model number

  Hi all

  I have the script that will display the version of the bios of the esxi host.

  can we add more lines to get the server esxi host (such as Dell R910, R720... model number HP, IBM) with serial numbers. and export it in excel or csv format.

  Script to get the version of the bios is listed below.

  $report = @)

  Get-view ViewType - HostSystem | %{

  $row = "" | SELECT name, "BIOS Version", "BIOS Date"

  $row.name = $_.name

  $biosTemp = ((($_.)) Runtime.HealthSystemRuntime.SystemHealthInfo.NumericSensorInfo | Where {$_.} ({Name: like "* BIOS *"}). Name - split "BIOS") [1] - split "") ""

  $row. "" BIOS version "= $biosTemp [0]

  $row. "" Date of the BIOS ' = $biosTemp [1]

  $report += $row

  }

  $report

  his put Out just like that

  
  

  

  Thanks to all in advance

  This is the version of the firmware of a network card.

  This can be done like this

  Get-view ViewType - HostSystem |

  Select Name,

  @{N = "BIOS Version"; E = {}

  $script: biosTemp = ((($_.)) Runtime.HealthSystemRuntime.SystemHealthInfo.NumericSensorInfo | Where {$_.} ({Name: like "* BIOS *"}). Name - split "BIOS") [1] - split "") ""

  {{$script: biosTemp [0]}},

  @{N = 'BIOS Date'; {E = {$script: biosTemp [1]}},

  @{N = 'Seller'; E={$_. Summary.Hardware.Vendor}},

  @{N = ' series'; E = {}

  $script: esxcli = Get-EsxCli - VMHost $_. Name

  $script: esxcli.hardware.platform.get (). SerialNumber

  }},

  @{N = "Firmware NIC"; E = {}

  $script: esxcli.network.nic.get ('vmnic4') .driverinfo .firmwareversion

  }}

• ESXi/ESX host disconnects vcenter Server 60 seconds after the connection

  Hello guys,.

  I recently made some changes to my VMware Lab.

  I'm under vCenter 5.1 with several hosts of ESXi 5.1.  My vCenter ran on one server ESXi 5.1 until I recently migrated there in a window of Windows 8 running VMware Workstation 9.   The vCenter is running normally and I am able to add hosts in stock, but they disconnect after approximately 60 to 90 seconds.  I believe that this issue is that the heart beats that are sent by the host do not reach the vCenter (port 902), I think that it is similar to the issue discussed in the following KB:http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1029919

  Here are my questions:

  1. the article describes download wireshark and run scripts.  Is there an easier away from do?  I'm literally just checking this single port of the ESXi host, there is no equivalent for telnet from an ESXi host?

  2 VMware Workstation 9 block ports or run its own firewall any?  Since this vCenter worked perfectly when running on the host ESXi 5.1 we know this isn't a firewall on the virtual computer problem, I have also checked the Windows 8 machine running VMware workstation and have verified that the windows firewall is disabled.  Windows firewall is not the issue. 

  Thank you

  Duncan.

  Just a quick question. A fact change of IP address of the server vCenter with migration of VMware Workstation? Maybe http://kb.vmware.com/kb/1008030 is related to the question!

  André

• What version of esxi supports Windows 8 and Server 2012

  We have ESXi 5.0 and vSphere 5.0.

  I want to make the smallest upgrade for our VMware supports Windows 8 and Server 2012.

  What upgrade do I do?

  According to the matrix of product interoperability VMwarevCenter Server 5.0 (without update) supports ESXi 5.0 Update 1 guests too.

  André

• VMWARE ESXI 5 on R720 Dell Server

  Hello

  We recently bought DELL R720 server and when we try to install vmware esxi 4.0 or esxi5.0 both it is not working.

  can we have the experience to resolve the error and help me install the same...

  Can you please inform us about the material used:

  -What kind of local storage do you use?

  -Do you have the installation will work perfectly or you run a mistake?

  -By what means perform you the installation?

• Update ESXi with a Virtual Center Server

  Hello

  I've updated a Standalone ESXi server using this guide

  http://www.vmadmin.co.UK/VMware/35-esxserver/262-esxvihostupdate

  It works the same way during the updating of the ESXi servers that are under a virtual Center Server?

  Thank you

  as part of the upgrade, using Crossover, a new vCenter agent is pushed. So, no, you don't break anything.

• ESXi on a DELL R610 Server

  Hello

  being a newbie on VMWARE ESXi 4, I use the software on a DELL R610 server with 1 INTEL XEON X 5650 processor and 24 GB of RAM (6 x 4 GB).

  This system 4 servers and 4 offices is hosted.

  To improve performance, I want to add more memory 36 GB (3 x 4 + 3 x 8) and I think a second Xeon processor.

  A second processor usage is possible with ESXi 4?

  Web search gave me a confused littlle bit, due to contradictory answers :-(.

  Best regards from the Germany and thank you for useful answers

  Torsten

  On the RAM that you want to add, please make sure you read http://kb.vmware.com/kb/1018754

  André

• the vmdk files are compatible with ESXi 4.1 and Vmware server 2.0?

  I would like the two 4.1 ESXi and Vmware server 2.0 use the same vmdk file, of course, not at the same time just to the emergency plan. Is this possible?

  Hi Spitzmann,

  Welcome to the forum.

  Yes, they use the machine material virtual version 7. Take a look at this kb .

  Useful another link .

  Concerning

  Franck

• To access ESXi 4 Update 1 custom server from dell MD3000i iSCSI SAN

  Hello

  I'm brand new on VMware ESX/ESXi products and for the most part, no.  I configured several machines virtual with server 1 and 2.  I am trying to connect a virtual ESXi 4 server in a SAN and starts to become very confused about what I can or not do.  I hope that someone here can break it down for me because I couldn't find the answer to my specific questions.

  Here's how I'm Setup:

  I have a Dell PowerEdge R710 with ESXi 4 Update 1 'Custom Dell' (whatever that means) is installed.

  I have a Dell MD3000i SAN using iSCSI with a pre-configured dedicated virtual disk.

  I would like to create virtual machines on virtual disk said.

  I think that ESXi 4 is completely free.

  It seems that to manage the server, I need to use 1 of the 2 products.  The Vsphere client or web application of VMware Go.

  If I use Vsphere:

  I have the ability to add a type of storage through the user interface.

  I'm on a 60-day trial. I thought that it was free.

  If I configure my iSCSI via Vsphere and then the eval expires... what happens?  All jump on me and then I have to purchase a license to get it back?

  If I use VMware go:

  It seems I don't really have any options to do any kind of configuration iSCSI in VMware Go.  I do?

  I also have a XenServer that is configured in this way and it's all free. I wanted to try the bare metal of VMware solution, but now I wonder if I'll have to go back to Xen.

  Can someone please relieve me of my confusion until I have to pull the plug on this experience.  Maybe direct me to the proper documentation on how to configure what I need with what I have at the cost free-is possible.

  Thanks a lot for your comments and have a wonderful weekend!

  I'd go by QuickStart Webcast and Webcast ESXi Webstart to help get a better understanding.

  Here is a configuration to the MD3000i http://www.dell.com/downloads/global/solutions/esx_storage_deployment_guide_v1.pdf guide

• ESXi 4.0 supports Windows Server 2008 Clustering?

  Hello

  Does anyone know if the Clustering Windows 2008 Server (MSCS) is officially supported in ESXi 4.0?  If this isn't the case, someone has suggestions on how to configure it to a production environment by using third-party tools?

  Thank you

  Andrew

  Yes.

  http://www.VMware.com/PDF/vSphere4/R40/vsp_40_mscs.PDF