Models of Calibration WCS RF command missing

Similar Questions

• VMware-toolbox-cmd: command Missing

  I have 5.8 CentOS x86_64 installed as a guest in VMware Workstation 8.0.2. I nto each of the pre-existing configurations selected during installation I wanted a minimal installation. After installing I start and run yum update to update the packages of the existing system. One of these updates is to the core that brings him up to 2.6.18 - 308.1.1.el5. Because the kernel is updated, I think that it is better to restart the guest operating system. After restarting, I try to install vmware tools. Before I do this I install the following packages via yum as dependencies for the vmware-tools.

  kernel-headers-$(uname-r) kernel-devel-$(uname-r) gcc44 gcc44-make c ++

  Now that I've done, I chose VM-> install VMware Tools in my computer. I clicked the button help in the pop-up message at the bottom of the screen of the comments, and I followed these instructions include, East, mountign tools such as a virtual CD-ROM, unzip them to your hard drive (I unzip them to tmp /) and cd in vmware-tools-distrib and run. / vmware - install.pl. I just choose the default for questions. He then asks:

  Before you run VMware Tools for the first time, you must configure it by
  calling the following command: "/ usr/bin/vmware-config-tools.pl". Do you want
  This program to invoke the command for you now? [Yes]

  Again, I choose the value by default, and as a follow-up to choose the default options for the rest of the questions cofnig. Then when it's done it says:

  You can now run VMware Tools under "/ usr/bin/vmware-toolbox-cmd" of the
  or by invoking command line ' / usr/bin/vmware-toolbox "command line
  during a session to Server X.

  Then I tried/usr/bin/vmware-toolbox-cmd and got an error (see excerpt below). I try to reboot, and rerun/usr/bin/vmware-toolbox-cmd. Still it gives me this error:

  / usr/bin/VMware-Toolbox-cmd: command missing
  Try "/ usr/bin/vmware-toolbox-cmd help ' for more information.

  Can someone tell me why vmware tools do not work?

  > Try/usr/bin/vmware-toolbox-cmd and I got an error (see excerpt below).

  This isn't an error - it tells you just that you must add a command.
  Have you tried the parameter help as shows it the message?

• Qosmio repair but model back, series & part number are missing

  Hello

  I got my laptop back from repairs, but in vista, the model number, serial number and the part number of the laptop are missing.
  For example if I go to toshiba pc diagnostic tool and on basic information, those who * next to them unknown.
  This affects TEMPRO so I can't know what it update.

  In dxdiag, the bios version is also different from the one I have.
  So, how do I enter these values of the sticker that is under the laptop?
  Please answer as soon as possible.

  Thank you

  Akuma is right. Please contact service again and tell them the same thing that you have written here.
  I hope they will understand that they have forgotten to update of DMI information.

• Only for experts: convert a model Catia/3DXML in PDF command line 3D

  Hello

  I need to know if it is possible to insert an interactive 3d model in a pdf file from a Command line operation.

  My source 3d CAD is Catia (Dassault System) who save in many formats such as .catpart .3dxml .stl ecc...

  I need to automate this task:

  By a command line operation

  (like for example "Acrobat.exe my3dmodel.3dxml final3dmodel.pdf")

  In this case, I created a spreadsheet to PDF with the 3d model.

  I need something more complicated.

  I have to insert a 3d on a pdf model existing on a position specific xy... always in command line.

  (In my case, the target of pdf is a bitmap A4)

  Can someone help me?

  Thank you

  Only to close...

  I solved by solutions of freeware...

  Thank you all

• Line break command missing in 2013 CVI

  I just changed to CVI 2012-2013.  I want to set up the command line cut (Ctrl-Y) in 2013, but as much as I know there is not cut command line available in the Options-> menu to change shortcut keys. Is avialable cut line in 2013?

  Tony G.

  I found the command of cutting line in the section "Miscallenaeous".  It works now.  Thank you!

  Tony G.

• Stop command missing in xp home Task Manager menu bar

  Have file, Options, display, Windows, help in the menu bar.

  Stop command and the menu link drop down corresponding disappeared.  Another xp pro system has this command.

  How to repair or restore?

  Current running XP Home Edition SP3, recent updates to windows (including the out-of-band for 2011) applied.

  Joe

  I tried the same fix... change the way users log on power and it has not worked for me. This seems to have happened recently.

  Joe, to the extent where lines underscore...

  Right-click on your desktop and select "Properties".

  Click on the tab "appearance".

  Click on the "Effects" button... »

  Uncheck the option "hide underlined... letters. »

  Hope this works

  Jason

  Uh, I just had to close the Task Manager and restart it to see the change... uh

  Thank you all

  Jason

• Make a right click Open command missing

  When I right click the 'open' is missing.   I have to drop down to get it to open open with.

  Hello

  ·         Which file you are trying to open?

  ·         The problem occurs with specific file type or all?

  ·         Were there recent changes made on the computer before the show?

  Step 1:

  Run this tool fixit and check if that helps:

  Diagnose and repair Windows files and folders problems automatically

  http://support.Microsoft.com/mats/windows_file_and_folder_diag/

  Step 2:

  Create the new user account and verify:

  How create and configure user accounts in Windows XP

   

   

  Also see this article: http://support.microsoft.com/kb/318011

• Router Cisco 1941 - crypto isakmp policy command missing - IPSEC VPN

  Hi all

  I was looking around and I can't find the command 'crypto isakmp policy' on this router Cisco 1941.  I wanted to just a regular Lan IPSEC to surprise and Lan installation tunnel, the command isn't here.  Have I not IOS bad? I thought that a picture of K9 would do the trick.

  Any suggestions are appreciated

  That's what I get:

  Router (config) #crypto?
  CA Certification Authority
  main activities key long-term
  public key PKI components

  SEE THE WORM

  Cisco IOS software, software C1900 (C1900-UNIVERSALK9-M), Version 15.0 (1) M2, VERSION of the SOFTWARE (fc2)
  Technical support: http://www.cisco.com/techsupport
  Copyright (c) 1986-2010 by Cisco Systems, Inc.
  Updated Thursday, March 10, 10 22:27 by prod_rel_team

  ROM: System Bootstrap, Version 15.0 M6 (1r), RELEASE SOFTWARE (fc1)

  The availability of router is 52 minutes
  System returned to ROM by reload at 02:43:40 UTC Thursday, April 21, 2011
  System image file is "flash0:c1900 - universalk9-mz.» Spa. 150 - 1.M2.bin.
  Last reload type: normal charging
  Reload last reason: reload command

  This product contains cryptographic features...

  Cisco CISCO1941/K9 (revision 1.0) with 487424K / 36864K bytes of memory.
  Card processor ID FTX142281F4
  2 gigabit Ethernet interfaces
  2 interfaces Serial (sync/async)
  Configuration of DRAM is 64 bits wide with disabled parity.
  255K bytes of non-volatile configuration memory.
  254464K bytes of system CompactFlash ATA 0 (read/write)

  License info:

  License IDU:

  -------------------------------------------------
  Device SN # PID
  -------------------------------------------------
  * 0 FTX142281F4 CISCO1941/K9

  Technology for the Module package license information: "c1900".

  ----------------------------------------------------------------
  Technology-technology-package technology
  Course Type next reboot
  -----------------------------------------------------------------
  IPBase ipbasek9 ipbasek9 Permanent
  security, none none none
  given none none none

  Configuration register is 0 x 2102

  You need get the license of security feature to configure the IPSec VPN.

  Currently, you have 'none' for the security feature:

  ----------------------------------------------------------------
  Technology-technology-package technology
  Course Type next reboot
  -----------------------------------------------------------------
  IPBase ipbasek9 ipbasek9 Permanent
  security, none none none
  given none none none

  Here is the information about the licenses on router 1900 series:

  http://www.Cisco.com/en/us/partner/docs/routers/access/1900/hardware/installation/guide/Software_Licenses.html

• MDM 2: SPLBATCH command missing

  Hi all
  
  I made several installation MDM 2 system but I can not find the splbatch.cmd* command in one of them.
  I tried to schedule D1-ACTVY* batch, using the web GUI Batch job submission, but running the submitbatch.exe* command (Windows), I get the following error on the D1 - ACTVY.110208_19.14.37.3380.THRD1. RUN.stderr* file:
  
  -----
  'SPLBATCH.cmd' is not recognized as an internal or external command
  operable program or batch file.
  -----
  
  Does anyone know how to get this batch file?
  
  Thank you

  What are the values you set in the options menu advanced for the Online/Inbuilt demon batch +%SPLEBASE%\bin\configureEnv.cmd - a +, especially for Batch active Server options and Batch Scheduler Daemon?

  From FW 4.0, SPLBATCH [.cmd | .sh] is replaced by submitjob [.cmd | .sh], you do not really have an interactive way of presentation of the lot.

  For more details, see Batch Server Administration Guide. submitjob [.cmd | .sh] is available in the templates folder.

• model line LCDS 3.1 command ant deploy?

  I am trying to configure hudson to automate our environment managed generations for our LCD projects I have the code compilation currently through the < fb.exportReleaseBuild project = "testESN" / > the task by using the version of Ant in eclipse.  None don't know if fb.exportReleaseBuild task or if there is another task for build/deploy the model under construction?  our CM environment has its own server to LCDs.  The current build I will migrate to a standard Ant version using mxmlc task.  I noticed in the .fml file < FbEntityProperties > the rootUrl hard wires to a specific host.

  Thanks in advance

  Chuckles

  You can deploy the template by copying it into your web application's WEB-INF/datamodel directory.

  Currently, there are no Java client to deploy a template on a server running.

• Create forms of vector layer command missing in CS5.5?

  I'm doing the tutorial from Eran Stern on shape layers. It says > place the .ai file in the layer. Did. Go > layers > create vector layer forms--but this option does not exist. Can someone help me understand this. If it is in a higher level of AE and I'm in CS 5.5? Thank you very much!

  Forms of vector layers is introduced in the CS 6

• WCS - model controller

  Hello

  I'm new on WCS lil... I upgraded my WCS now to 5.1.64... WCS has already a couple of controllers mapped with about 40 LWAPP...

  I see an inconsistency in WLC - WCS configuration, on the model of controller... When I change the configuration of the model on the WCS, it updates the WLC somehow? I am cautious about is I don't want to disturb anything either with the WLC running is, by changing something on the WCS...

  I have also 2 new controllers added to the WCS... I need to set controller models for these... Can I directly configure this and associate the new WLC to the new model? Yet once, model controller in WCS will apply to the new WLC?

  Raj,

  In this case, you can add new controllers to WCS with RO SNMP community strings. Then go to configure--> controllers and check the box next to one of the controller. From the controls menu select 'discover controller models. This will automatically create WCS models based on the configuration of the controller you selected. Follow the same process for all controllers.

  You'd be using community RO, WCS strings would not involve no change. You will now be able to verify correctly.

  --

  Pushkar

• Can I use an alias for parameter such as 'The value of parameter value VI' entry in the palette of models?

  I played with the example Veristand 2015 "Set model Parameters.vi.

  Is it possible to use a parameter alias as the input string to the function 'Set parameter 2D Array Values.vi'? I tried to do this, but get the following error:

  Error 307662 has occurred to define model Parameters.vi > NI_VS ModelManager ExecutionAPI.lvlib: NI VeriStand - Set parameter 2D Array Values.vi

  Possible reasons:

  NEITHER VeriStand: The node is not found in the system.
  =========================
  NOR VeriStand: Could not find expression of parameter

  I am convinced that the alias has been implemented in the system definition correctly.

  If not, what the point of having an alias for parameter? Model workspace calibration controls don't seem to be able to use them. Am I missing something?

  Thanks in advance for any help on this matter.

  The alias parameter access is just for reading.

  To write to the parameter, you ned to use control of Calibration of model or the model parameters Manager API. Alias as the parameter cannot be used to write.

• USB composite device driver is missing

  I'm having some trouble to install Generic USB devices on Windows 7 (i.e. concentrators and composite devices). The window can't find the driver for the device, even if it must use only the drivers built into windows. After that I connected the device, Windows reports unknown device.

  In Device Manager, if I select the camera, then press:

  -"Update driver software...". »

  -"Browse my computer for driver software".

  -"Let me pick from a list of drivers for devices on my computer.

  -Manufacturer set "(Standard USB Host Controller)" "

  In the model list, "USB Composite Device" is missing. I think it should be included, as it is on other computers. Why is this lack?

  The driver file c:\windows\system32\drivers\usbccgp.sys exist and there are other Composite USB device listed in Device Manager. Only, it seems willing to recognize new devices.

  Is it possible to reinstall the USB drivers?

  Thank you.

  You are welcome.
  I suspect that the problem is the inf files.  This is another long shot, but it might be useful running sfc/scannow in an elevated command prompt.

  FWIW the link below explains how Windows search drivers for USB devices.
  (Usbccgp.sys) USB Generic Parent driver
  http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff539234%28V=vs.85%29.aspx

• Action of 'Reply with template' missing the Message filters choice "perform these Actions."

  Hello

  I just installed the latest version of Mozilla Thunderbird (24.4.0) and I am trying to create a "vacation response." I read on Mozilla's Support site:

  Another option is to create a message filter and respond to all incoming messages with a model.

  (see https://support.mozilla.org/en-US/kb/vacation-response?esab=a & s = out + of + the + office & r = 3 & as = s )

  I created a template and saved, and then I tried to create a message filter. However, there is no option for "Reply with template" in the list of choices for the action to perform. I see choices of action, for "Copy Message To", "move the Message to ' and"Forward Message To", but not"answer with model.

  Why is it missing and how to get what it appears?

  Thank you for helping.

  Hi sfhowes,

  I think I knew what is happening.

  First of all, I am a new user of Thunderbird. I have been using e-mail program from Apple on my Mac for many years. Since the upgrade to Maverick, his remark that the Mac mail program is unstable sometimes causing my Mac to freeze, sometimes lose my ability to change windows desktop, and slow clumsy scrolling problems in the e-mail program, but also the temporary e-mail program freeze.

  I installed the latest version of Thunderbird this weekend and am just become familiar with it. I have configured all 8 of my email accounts and they all worked very well. Then I added the Conversations module and I wanted to be able to rearrange the order of my eight accounts and found that Folderpane Tools was the ticket and it worked... had not noticed it was only up to 23... but it worked on 24.

  I said incorrectly that the Folderpanes changed the way that my folder pane displays things. It's the Conversation that made... FolderPane Tools let me reorganize and that's all. But information changed the way the things that have been presented in that in records added to organize by inboxes, sent, trash, etc. And models was one of these records, he added.

  Being unfamiliar with the models as I'm new to Thunderbird. Here is what happened. I created a message and saved as a template. I didn't realize that it was married to a particular account. And when I looked at the file of models I do not remember to see a subfolder for the specific account, for which the model was.

  After reading your last email that I removed the two add and my accounts appears in the folders pane as they did originally, most notable was the Inbox and folders of model disappeared.

  I tried to create a filter for a specific account and the problem remains, but I was wondering where my registered design went because I couldn't find it. So I created another and discovered that has created a new folder called Templates for the account that I was trying to make the filter "reply with template". And then I could see the "reply with template" option when creating a filter.

  To understand what was wrong in the first place, I reinstalled the Conversations, and all folders (Inbox, sent, trash, models) have been reinstated. I looked in the template folder and saw two subfolders, one for the account that I just created the new model and one for my default account. In my default account was the original model I've saved. And now when I try to create a filter by using the original template, I see the answer with the template option.

  I can no longer reproduce the problem since the Conversations, creating a second template and then uninstalling reinstalling Conversations.

  So, the problem is solved, but something is not quite write when the first model created during the installation of the add-on of Conversations. I don't remember see a subfolder in the Templates folder when I created the first model... I could be wrong, but all I remember is the model itself in the Template folder, and not in a subfolder. So I guess that the answer with the Template option did not appear because the model I made did not seem to be assigned to an account.

  Thanks for help.