Mouse Microsoft comfort sculpt trolling in Windows 7

Similar Questions

• Disable the "Windows" button on mouse Microsoft Comfort sculpt

  Got the mouse as a gift a few days ago. The "Windows/Start" button is extremely annoying and gets accidentally pressed on a regular basis. The sweeping motions can be disabled via the "Center of keyboard and mouse, but there is no option on disabling the click on the button itself.

  What we thought when he took that decision? As "this button is so supreme, who wants to turn it off? Not as it is placed on the side in a way every small movement of the thumb based on it. ' Really?

  Updated - Check Zorgovskiy response.

  The only solution that worked for me was to lift and remove the blue button windows shell, then pull out the button located below. Then, you can put the blue button shell back on and it stops all the time opening the menu windows!

• Mouse Microsoft touch Sculpt with Windows 7 Professional 64

  

  I get the error message above then try to pair my sculpt touch mice.  I installed the latest Broadcom drivers for my Rocketfish Bluetooth 2.1 EDR adapter.  I have also installed the latest drivers for windows from here:

  http://www.Microsoft.com/hardware/en-CA/d/sculpt-touch-mouse

  I want to need the driver but I have the latest and best.  Even when I right click on the device when it is found for matching and click on the checkbox that indicates that this is a pension service of the mouse/key HID that it still does not work although it seems to install the driver, then it disappears.

  Help!

  Hi Mark,

  First of all, I want to thank you for providing the detailed information about this.

  This issue may have caused due to driver or device related issues. I would like to know some information about the problem so that we can help you further.

  1. have you made changes on the computer before this problem?

  2 have you installed a third-party security software on your computer?

  I would suggest trying the following methods and check if it works for you.

  Method 1:

  Try to change the settings for the Bluetooth compatible devices and check if it helps. See the following Microsoft Help article to change the settings for Bluetooth compatible devices.

  http://Windows.Microsoft.com/en-us/Windows/change-Bluetooth-device-settings#1TC=Windows-7

  Method 2:

  Try the procedure described in the following article Microsoft Help difficulty common driver related problems and check if the problem persists. This is to confirm whether or not the problem is caused because of driver related issues.

  Refer to the following Microsoft Help article pilot common to solve problems.

  http://Windows.Microsoft.com/en-us/Windows/tips-fixing-common-driver-problems#tips-fixing-common-driver-problems=Windows-7

  Please reply with the status of the issue so that we can better help you.

• Keyboard Microsoft comfort Sculpt there the soft keys?

  Very hard tent find the answer to this without conclusive answers found to date.
  Thank you

  No programmable buttons, 8 win only 'special' shortened 'hot' keys and the keys to the usual media.
  Not rechargeable or the other.

• Mouse BT is not matching in Windows 10

  Hello

  I hope this is the right place to ask this question, since it's on windows (but on my Mac)

  My problem is that my refuses to mouse (mouse Microsoft Comfort Sculpt) pair Bluetooth in Windows 10 (installed Boot Camp), while it works perfectly under OS X.

  What I do in the Windows 10:

  I start Windows, open settings - box Bluetooth, then turn on my mouse, then press on and has held the key "pairing" on this subject. The mouse appears on the list of discovered devices, I select "Even" and after a second or two Windows says "could not match, try again and make sure that the mouse is detectable again" the mouse disappears from the list and is not seen again here until I have restart Windows. I repeated this dozens of times without success procedure; I ran all the possible troubleshooting utilities - without success. I even downloaded and installed "Keyboard and mouse Center", but it obviously doesn't work because the mouse must be matched first to do the job of 'Center '. I contacted Microsoft, they suggested that I should find a suitable driver for my Bluetooth adapter, but the only driver I could find is dated the internal Apple Broadcom BT card driver, if I'm not mistaken, July 2015.

  I really need to make it work in Windows 10, because I have to work a lot in this OS and I prefer to use a Bluetooth mouse (not necessarily the real mouse, but since it works under OS X, even if I buy another mouse, there no guarantee that it will work in Windows 10).

  So, two questions:

  1. How can I make my current work (MS Sculpt Comfort Mouse) mouse in Windows 10?

  2. are there other BT mice who do you think is more likely to be achievable in Windows 10

  (I don't really want to buy Apple Magic Mouse - I prefer a traditional wheel 2 buttons + scroll mouse)

  How do you normally run Windows on your Mac? You start in Windows only using Boot Camp or you run Windows and OS X both at the same time using Parallels or Fusion?

• Cannot connect mouse Microsoft Sculpt comfort Bluetooth constantly

  I can't get my mouse Microsoft Sculpt comfort to stay always connected to my laptop (Win7 x 64).

  In the middle of use, it stops working. I studied in the devices & Printers and the device returns is no longer there. I pass by add it a device Wizard, making sure that my mouse is discoverable (green and red lights flash alternately) and he said he's logged and it will look for a driver. The laptop detects a driver and a "Bluetooth Service Configuration" window appears.

  Open Device Manager, I see that HID-compliant mouse is added to the list of mice and other pointing devices. As soon as the "Configuration of Bluetooth Services" window closes, the mouse is removed from the Device Manager and removed from devices & Printers.

  I tried to uninstall and reinstall the Bluetooth driver.

  I tried to turn off the Bluetooth power management feature.

  I tried to change the batteries.

  I tried to move closer and further away.

  I tried browsing the Add Assistant device with Microsoft mouse & keyboard Center installed and uninstalled.

  I restarted at various times during the process.

  What should I try next?

  1. I didn't do any hardware or software changes before this problem I can think
  2. My computer is a Dell Latitude 6430u
  3. I have Kaspersky installed 10.1.2.23 on my computer. It is managed by Active Directory by my IT Department if I can't make changes to it or turn it off somehow.

  Troubleshoot failures in detecting new Bluetooth mouse or keyboard
  -Was not able to finish because I do not have permission to access the registry items in order to remove the bluetooth stack

  I performed a clean restart in any case and I tried to add the device again, and it worked this time.

  I will update this thread if it decides to cut again for some reason any.

  Thank you

  okravetz

• Microsoft Comfort Mouse Sculpt has stopped working suddenly.

  Hello, my mouse Comfort sculpt stopped working all of a sudden. I wrote my notes in Notepad and after some time when I tried to start the mouse it does not work. Tried to replace the batteries, but of no use. Updating drivers did not help. Sculpt keyboard works very well. I tried on two machines and having the same problem. The blue laser light under the mouse is dead. However, when I turn on the mouse (power on) the blue light flashes for a second. Not sure if it is a hardware problem. I bought this mouse in January 2014 and worked great until today! Help, please.

  Hi Jordan,.

  From the description of the problem, it seems that it's a hardware problem. I would say contact Microsoft hardware support to improve assistance about the issue you are facing with Microsoft Comfort Mouse Sculpt.

  
  

  How to contact Microsoft if you have questions about your hardware device.

  http://www.Microsoft.com/hardware/en-us/support/contact-us

  For more information on how to replace or upgrade to Microsoft, hardware software and manual, click on the number below to view the article in the Microsoft Knowledge Base:

  326246 how to replace Microsoft software or hardware, order service packs and upgrades and replace product manuals

  The third-party products that this article discusses are manufactured by companies that are independent of Microsoft. Microsoft makes no warranty, implied or otherwise, regarding the performance or reliability of these products.

  Hope this information helps. If you need help with Windows, let us know and will be happy to help you.

• Mouse Microsoft Wireless Comfort Keyboard 4000 and 5000 laser will not work with Windows 7. Is there a fix for this problem?

  I recently bought a new computer with Windows 7 installed and much to my dismay found my Microsoft Wireless Comfort Keyboard 4000 and Wireless Laser Mouse 5000 are not compatible with Windows 7.  If no fix that means I have to start avery good keyboard and mouse I used comfortable for a long time.

  When you try to load from the disk, the message informed me that it was not compatible and use the automated system to find a fix has not produced an answer.  My keyboard and mouse are in great shape and it is not necessary for me to replace it with a new one from a material point of view.

  The drivers for both devices on the drive that you are probably older versions, you should be able to download the latest drivers for Windows 7 in the pages below, you will need to choose which version of Windows 7, you are running, that is, 32-bit or 64-bit.

  Wireless comfort keyboard
   http://www.Microsoft.com/hardware/en-us/d/wireless-comfort-keyboard

  Wireless Laser Mouse 5000
   http://www.Microsoft.com/hardware/en-us/d/wireless-laser-mouse-5000

  If the above is not your exact devices check for them on the next page:

  Microsoft Hardware downloads
   http://www.Microsoft.com/hardware/en-us/downloads

  Kind regards

• Sculpt Microsoft comfort keyboard function keys

  Normally, the F2 key allowed me to enter in a cell in Excel.  The comfort keyboard sculpt received multimedia commands to the F keys, I would like to turn off or reassign so that leaves the F2 key to enter a cell.

  The centre of keyboard and mouse does not seem to allow changes.  Open 'Intellitype Pro' and then make the changes he said some instructions on the internet.  I am unable to download Intellitype Pro, except if I uninstall the centre of keyboard and mouse.  But, in so doing, Intellitype Pro is unable to find the USB keyboard.  It is impossible to get in touch with a Microsoft support.  If anyone can help with this question?

  I think that hard blue-white 'switch' is correct. It is to the "left of instructor LED, above of the Num Lock key"?

  New features of the keyboard Comfort Sculpt

  It is possible that it is simply a bad switch or keyboard.

  Microsoft Hardware support

  There was a similar position in December last with exactly the opposite problem that you describe.

  Blue Sculpt Microsoft comfort keyboard function keys do not work

  The solution was to use a different USB port. Perhaps one of the small connectors inside the USB was dirty or defective.

• How to restore a side scrolling for USB Microsoft Comfort Mouse 6000

  My question is quite simple as shown above in the title:

  How to restore a side scrolling for USB Microsoft Comfort Mouse 6000?

  I'm running Windows 7 x 64 professional, and everything went well & smooth (my 16 GB of RAM much help on that) until

  a few days ago when I noticed - after some windows recent updates there is no icon scrollbars appearing when you click the mouse wheel and therefore there is no scroll option in one of the browsers, I use Mozilla or Google Chrome or IE.

  Everything in trying to solve this nuisance, I must say I did a lot of web research.

  I also read and tried all your technicians where suggesting that solutions in the articles:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/facing-issues-with-Microsoft-Optical-USB-wheel/5e4ce992-83e1-460A-8bd2-99ceb1bf0756?auth=1

  and

  http://support.Microsoft.com/kb/303091

  ... Change usb port, haven't set all the default settings, no improved pilot using IntelliPoint 8.2 64 bit for Windows 7, don't have to uninstall/reinstall drivers, have accessed HID service and set it to Auto etc.

  It doesn't help

  Nothing else to try?

  Dan

  PS side that neither on the side of scroll my mouse goes really well (where the mouse has not suffered any material damage or other concerns)

  Small update

  Today I take back my previous Microsoft Intellimouse Optical Usb and that works like a charm, including a scrolling sideways feature smooth

  I must say 2 things:

  1. I replaced it because I wanted a mouse blue laser instead of the red light of the IntelliMouse laser to adapt to the blue of the Razer Lycosa keyboard and now I regret it because vousLe mousey is in possession of someone else family: p

  2. I have test the mouse USB of Comfort 6000 on another PC-work on Windows XP and also not on the side scrolling is so clearly hardware failure of the intermediate wheel after a few less than 7 months

  I'm starting to consider that this 6000 comfort USB mouse (which is not one of the cheapest) was a bad choice because it lasted not more than 7 months, despite a decent use and friendly of TI - i don't play shooters or those games that are material mouse pointing.

  In conclusion: he certainly wanted to consider other mice light blue other businesses that might last longer

  Sorry for my post that you lost some of your time

  so:

  CLOSED TOPIC

  Hi Dan,.

  I appreciate the efforts you have made and I thank you for sharing the information. Your comments would probably help some users faced with a similar question.

• Microsoft Comfort Curve Keyboard keys malfunction after reload of software Windows 7 64 bit.

  Microsoft Comfort Curve Keyboard 4000 and 2000 models both have swapped the functions to shift 2, shift of single quotation marks, backslash shift and shift 3.  Each keyboard seems to have the same problem.  Occurred after having to reload the software 64-bit Windows 7.  RELOADED software for keyboards and still does not help. Had to reload windows and keyboard software after that caused windows crash errors.

  Hi Jon,

   
  Please contact Microsoft Community.
   
  I suggest you to consult the article below and check if it helps.
   
  Troubleshoot wired keyboards that do not or only the erroneous characters category;
  http://support.Microsoft.com/kb/258826
   
  Note: If the problem persists, I suggest you to consult the article below.
   
  Mouse, touchpad and keyboard with Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-keyboard-problems-in-Windows#V1H=tab01
   
  Answer us with results, so we can help you further.

• How can I reduce the DPI of my "Microsoft Comfort Mouse 6000"?

  Is this possible? I installed the drivers, but the only thing I can do is the remapping of keys.

  Ok

  First of all, my experience tells me that maybe it's that you have installed the wrong driver. Please can you tell me exactly what that driver you have installed for 'Microsoft Comfort Mouse 6000' and where you got to?

  Second, if this is the correct driver for the Setup programs start menu look.

  Microsoft Web site implies that the latest intellipoint (mouse from Microsoft software/drivers) is probably 8.15...

  http://www.Microsoft.com/hardware/en-us/d/comfort-Mouse-6000

  If this isn't what you have installed and then try and see what happens.

  Please mark this as useful or response if applicable.

  Tricky

• Microsoft comfort mouse 4500 scrolling too fast in games.

  Hello

  I recently purchased a 4500 Microsoft comfort mouse and the mouse is pretty good, but I have 1 problem with it.
  Because the mouse has a very soft mouse wheel and sensitive, it is very good browsing the web, because you can scroll very accurate, but when I play a game (e.g. Half Life 2, but it happens in every game.) and I want to change weapons, I have to scroll my mouse wheel.
  Now because the mouse is very sensitive, even the wheel of scrolling a few millimeters it makes the game go all of a sudden all my weapons like crazy.
  This makes the game more neigh impossible games, because I can not choose exactly what weapon I want.
  
  I was wondering if there is a driver that can solve this problem by saying only my pc to scroll 10 Scrolls after the registration of the mouse, for example.

  I tried all the options of the intellipoint driver, but none seem to be able to do what I want to achieve.
  Thanks in advance.

  Hello

  I'd say contact Microsoft hardware support for assistance.

  http://www.Microsoft.com/hardware/en-us/support

• Microsoft wireless mobile mouse 3500 drivers installation fails in windows 7

  I bought a mouse wireless 3500 from ebay. the package so that the web of microsoft, said this mouse is compatible with windows 7. Unfortunately does not not for me. whenever I connect the nano transceiver, installing device drivers window appears but ends with drivers not installed successfully. Windows Update is an important update to update the driver by Microsoft for MS driver peripheral detection material but end installation with the error code 80070103.

  Please guide me...

  Hello

  You have installed the software from the CD that came with the mouse?

  Windows Update 80070103 error code indicates that you might be trying to install a driver is already installed on your computer.

  See this link:
  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-80070103

  Follow these steps:

  Step 1: Try to install the drivers in the State of clean boot and check if it helps.

  Refer to this article for help:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
   http://support.Microsoft.com/kb/929135

  Steps to perform a clean boot:
  a. click the ORB start on your desktop
  b. type msconfig in the search box and press ENTER.
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  c. in the general tab, click Selective startup.
  d. under Selective startup, clear the check box load startup items.
  e. click on the Services tab, select the hide all Microsoft Services check box and then click Disable all.
  f. click OK.
  g. When prompted, click on restart.

  NOTE: Please check that you start the computer in normal mode after a repair. Follow step 7 article.

  Step 2: Uninstall the software that came with the mouse and reinstall.

  Download the software for your mouse wireless from the link below:
  http://www.Microsoft.com/hardware/download/DownloadResult.aspx?category=MK&type=mouse&name=GMF-00010&OS=Win7_32&lang=en

  If nothing is done, then get in touch with the hardware Microsoft support for assistance.
  http://support.Microsoft.com/common/international.aspx?RDPATH=DM;en-us; Select & Target = assistance & C1 = 502

  Kind regards
  Afzal Taher-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Driver Wireless Laser Mouse (PA3706E-1ET1) problem software on Windows XP

  I have a Toshiba Wireless Laser Mouse PA3706E-1ET1 that gives a serious problem with the MouseDriver.EXE software provided on the CD with the mouse.

  * First release _ * _: when you install the driver on the CD I get an error message saying that they are not certified by Microsoft. The documentation that came with the mouse has an additive brochure that says about it and ignore that the software works without any problem.

  * _The issue_ *: with the mouse driver, I get a mouse icon in the windows taskbar and clicking on it will allow me to set up all the extra buttons running. Everything works very well at this point. The problem occurs when I try to shut down Windows (this is Windows XP) it will fail to finish. It seems to me close a few icons in the status bar, but then it stops. I can click on stop again and it still will not close. If I click with the right button on the mouse icon of toshiba in the windows taskbar and click EXIT in the drop-down menu, then shut down Windows and then stops. It seems that the mouse driver is to avoid a stop down. This is what is displayed in the event viewer:

  Event type: WARNING
  Event source: USER32
  Event category: no
  Event ID: 1073
  Date: 02/07/2009
  Time: 10:53:03
  User: NT AUTHORITY\SYSTEM
  Computer: PC
  Description:
  The attempt to shut down the PC

  For more information, see Help and Support Center in [http://go.microsoft.com/fwlink/events.asp].
  Data:
  0000: 00 00 00 00...

  * _Third issue_ *: it is serious, I have Microsoft Virtual PC. When I launch and run any VPC I get a blue screen of death. The error is DRIVER_IRQL_NOT_LESS_OR_EQUAL and the offending component is SysMouseFilterF3.sys.

  If I uninstall the mouse driver that disappear from all of the above questions. The mouse works but not all buttons. Scrolling the mouse left + right, vertical and the back and buttons before work, but the parchment of horizontal tilt and two additional buttons do not work.

  I can't find any mention to my model mouse on Toshiba or the Internet in general. Is there an updated driver for this mouse or in any way I can solve problems above without losing the functionality of the extra buttons?

  -Andy

  Re: Toshiba Wireless Laser Mouse PA3706E-1ET1 (which is appears as 'Sysgration USB mouse' in hardware)

  Yes, Andy, I have the same problems with this mouse. No driver updated (or even original) with a view to anywhere.

  Called Toshiba - all they could suggest "just use the drivers on the CD" and unable to offer any other suggestions!
  No drivers on PC World UK (seller) or Sysgration site or the other.

  Author of the driver (info email the driver DLL) contacted but no response until now.
  SysMouseFilterF3.sys does not seem to be the culprit because it causes a blue screen of death on the startup of the system.
  In order to get the mouse to work I just uninstalled Sysgration drivers and delete the mouse in the hardware list.

  Windows Xp then tried and it seems to work ok with driver default for Microsoft - but only right + left, scroll, front + rear, Alt + Tab appear to function.

  Colleagues, it takes up to a new driver appears!