Mouse Microsoft Works does not correctly

Similar Questions

• keyboard ergonomic 4000 microsoft works does not correctly

  When I press a key on my keyboard to some letters I get several characters. I tested it and press to q for example qweF3 etc.

  Hello

  ·         Remember to make changes to the system?

  ·         How long have you been faced with this problem to?

  Method 1:

  I suggest you to plug in the keyboard on another computer and see if the problem persists.

  Method 2:

  I suggest you follow the steps mentioned in the article below.

  Troubleshoot wired keyboards that do not or only the erroneous characters category

  http://support.Microsoft.com/kb/258826

  Method 3:

  Uninstall and reinstall the drivers and software for the keyboard and check if the problem persists. Download drivers form the link mentioned below.

  http://www.Microsoft.com/hardware/download/download.aspx?category=MK&type=keyboard&SKU=B2M-00012

• with firefox 43 yahoo and yahoo mail doesn't work does not correctly

  With the help of win 7 and firefox 43.0.1, I have 4 computers and now all have problems with yahoo and yahoo mail doesn't work does not correctly. Loading sites, but most of the features are missing and clicking on what whether changes to the lists of text. I have disabled flash / anti-spam etc., cleared cookies and cache and even firefox loaded down once again and have upgraded, no help. I'm forced to use IE now.

  I tried Yahoo support, they said try Firefox... In any case, it's Firefox and I found a solution using the 'Refresh Firefox' button. Whatever the problem was fixed on two of my computers so far. Got to update my setting again but it's 10 m, compared to the 10 hours I spent trying all that is nothing.

  Thanks for the help!

• my microsoft work does not work error message that I need to reinstall, but I don't have a disck because it was already installed when I bought at walmart

  I bought my dell computer 2009 Wal-Mart, that he has is already set up with windows vista basic... and now my microsoft works does not work it says I have to reinstall.  However, he is not come with a disc. so, how can I do without having to buy a disc

  Go here: https://smartsource.dell.com

  This is where you go to download programs that have been installed on your computer that you do not have a CD for.

• Update KB976902 now the mouse doesn't work does not correctly

  I had the KB976902 recently updated on 2 of the 3 computers and 2 who got now have a mouse that does not correctly.  The computer number 3 does not have the update and still works fine.  All three are almost identical hardware and software and have legitimate versions of windows 7.

  The problem of the mouse made play almost almost impossible. Left click crashes, lag mouse click one or two times when I I try to do a restore from the left eventually drag a shortcut of the thing, I clicked on and don't know how or why.

  I did a restore on a single computer, but it did not help.

  Norton and McAfee applications are notorious for not to uninstall (or upgraded) themselves. Since you are not sure, I'll have to have executed two removal on all of the computers in question tools.

  NB: If a step said to reboot, reboot!

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  1B. download the tool McAfee Consumer Product Removal, save it to your desktop: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. right click on the file saved in # 1 above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  3B. right-click on the file saved in # 1 b above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then reboot again.

  4 reset the IE8 advanced settings by http://windows.microsoft.com/en-US/windows7/Reset-Internet-Explorer-settings

  5. open Internet Explorer 32-bit (only!) to http://support.microsoft.com/kb/971058 & run it in DEFAULT and modes difficulty then AGGRESSIVE. [1]

  6. restart a last time & test.

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Microsoft mobile mouse 3000 works do not correctly under Vista

  I have a mouse Microsoft 3000, which is less than 3 months old. I replaced the battery. I used the reset button. However, the mouse will not turn on gree. indicating that the mouse works. I saw this question already on the Microsoft answers site. ILO is unable to find the solution. Can you help me?

  Hi Instructor4216,

  I recommend you to try the steps in the articles below. You can exclude what you have already tried.

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  http://support.Microsoft.com/kb/838398

  Troubleshoot a wireless mouse that does not correctly
  http://support.Microsoft.com/kb/321122

  If the problem persists, you get your mouse replaced.

  http://support.Microsoft.com/kb/326246/

  I hope this helps.

  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• The mouse scroll wheel doesn't work does not correctly?

  Win 7, Microsoft Wireless Mouse 5000
  Everything worked fine but I had to reformat & return my computer again the conditions of the plant.  I have add the correct software for my mouse.  Now, when I use the scroll wheel, it moves the screen a full coming soon page (spreadsheet, word processing, etc.).  The unique thing is that I can say that she does so ONLY with products at Microsoft (Excel & Word so far), with any other software, it seems to work as it should (a few lines at a time).  No one knows what is the cause?  Help please.

  Thanks in advance... Bob

  Hello

  1. have you checked if the problem occurs with a different mouse?
  2. don't you make changes on the computer before the show?

  
  You can try the steps provide in the supplied knowledge base articles and check if that helps:
  Troubleshoot a wireless mouse that does not correctly
  http://support.Microsoft.com/kb/321122
  Troubleshoot the incidents of the response to the mouse or wireless keyboard
  http://support.Microsoft.com/kb/838398
   

• Code 31, Microsoft IASATAP adapter doesn't work does not correctly, the yellow exclamation point, no internet

  I have Emachines E620, Microsoft Vista and service pack 1. My PC cannot connect to the internet and stop a yellow exclamation point error message. My internet providers technical support, I lost my IP address and cannot be recovered. My PC shows that my card Microsoft ISATAP does not work, but when we try to update, it says I have the updated version of the adapter.

  I tried everything the system fixed but did not work. Can't try bugs online because I can not connect to internet. My research on the Internet, maybe I need service pack 2. Can someone tell me if this could work? If so, what is the way least costly to achieve? What does it mean that my PC is undesirable?

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/e5f8973b-0079-4E2B-8da4-7bbd345b9426

  Read the info above from Microsoft Support.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://www.eMachines.com/support/drivers.html

  Go to the Web site of emachine'ss to the above link > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  The computer you are using now that you have no Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

  See you soon.

  Mick Murphy - Microsoft partner

• Why is one of my 4 5893 Modules doesn't work does not correctly?

  Hello

  This is the configuration of my HW and SW:

  LabView 2013 SP1

  1 x cRIO 9076

  4 x NI 9853 CAN Modules

  CAN0 - 1000 Kbps, entry timeout = 0, OutputTimeOut = 10000, Module clock: 20 MHz

  CAN1 - 500 Kbps, entry timeout = 0, OutputTimeOut = 10000, Module clock: 20 MHz

  I worked on a program for a test system, where each Module 9853 control two devices (CAN0 and CAN1), the same type of systems is controlled by other 9853 3 Modules in parallel.

  So basically, I use exactly the same functions for each module. So far, everything has worked correctly on module 1, but now that I started to test all other modules I have the problem that Module 3/CAN0 does not correctly read the information.

  While watching the FPGA façade, I see that each 10000ms one value is read, but only on that ONE module (frames are sent every 1ms from my unit)

  I tested the HW itself using the included examples and it works correctly, the only difference is that the example used only 2 Modules, one to send data and the other to receive it.

  I included my FPGA program as an image, I really don't think there is a problem with my RT SW, because all the other modules are working properly. Basically, my SW FPGA bed CAN Modules and puts the information in a FIFO, if there is an error (no information), it will make a loop once more and check again.

  Thanks for your help

  I solved the problem, it was an error of configuration on my side.

  The entry for Module3 CAN1 time-out was set up NOT as 0ms and 10000ms as I thought! , so that was my reading for DUT3 loop run only every 10000ms.

• WIFI doesn't work does not correctly after driver update

  I have a DESIRE 4 laptop 1023tu with operating system Windows 8 PRO. My WIFI works does not properly after the update drievr.

  Problems...

  1. When you try to connect to a wifi hotspot the quick adapter turns off and allows the card instantly

  2. after connected, sometimes no internet access and the problem turns off only after reconnecting to the netwrok after setting off.

  If the update doesn't work not for you then do as I explained in my previous post and roll back to the previous driver. This philosophy can be applied to all updates.

  If there is no pressure or emerging reason to update to your PC or laptop works just great... do not update. (this is especially true when it comes to an update of the BIOS)

  For your question #2, the problem could be your wireless (modem, router or access point) which causes the connection dropped.

  Best regards
  ERICO

• BlackBerry smartphones HELP! Ball control and keys doesn't work does not correctly!

  I have the curve 8330 and when I put in my unlock code and press the trackball, it acts as if im entering additional keys. When I finally get into the phone and try to press on the trackball, in its action, as if I am pressing the asterisk key. It does not correctly read the keys and is to register them as another key! Help pleaaase!

  This looks like what I've seen several times on a device with moisture damage.

  Even sitting on a countertop bath during a hot steamy shower or bath can cause problems with keyboard and trackball up to this JUST-withered.

  Really, it is more common than you think.

  1 the battery immediately! Do not turn on your BlackBerry device.

  2. allow the device to dry in a warm, dry place for 3 to 5 days * (see below)

  3. DO NOT "check it every day" by placing the battery in. Leave what would to dry completely. It takes time. Replacing the battery to check it can damage only (humidity + power = disaster).

  3. If the unit is hot after the drying period, let it cool to room temperature before placing the battery in the.

  * Suggestions on your BlackBerry in a warm dry place (open, with battery):

  • Place the BB in a container of dry uncooked rice, and then you can also place it in one of the locations mentioned below.
  • On top of all heat dry emitting electronic components: TV or CRT, LCD, TV cable box / Satellite or plasma monitor
  • On the dashboard of your car on a day sunny

• Mouse Microsoft Wedge does not work on Windows RT.

  Original title: Wedge Touch Mouse with Windows RT on VivoTab RT

  Hello, everyone.

  I've got MS Wedge mouse to use with ASUS RT enrich your life, so it has some issues. The principal is lagging standing of moving the pointer. I think it's a problem of drivers, because it lags behind more when a process performs (web page loads, for example). But even more interesting is that gal becomes extremely huge when I plug in, the perception of the cord to the tablet.

  It is important to say that another mouse Bluetooth from another provider does not have this problem. There is of course no scroll kinetic touch but it costs 5 times cheaper and works quite well!

  Hope someone has a solution for this problem. Thank you.

  UPD: it seems that this problem is due to the WiFi Broadcom adapter. Turn Wi - Fi off stops late pointer but you leave = connectionless) editing the properties of the adapter does not work.

  I solved my problem by defining "Bluetooth Collaboration" parameter set to "Disabled network card." Hope this will help you with your question. Good luck.

• HP Envy, Windows 8 slow, late and does work does not correctly

  Hello

  First off let me give a run down of my installation:

  -HP Envy Dv7, (about one and a half years)

  -Windows 8.1 (I upgraded windows form 8)

  -HDD 750 GB (Stock)

  -Everything else is stock based on the computer

  So, my trouble started about 3 months after what appeared to be a routine stop after a day use.  The next time I started my computer took a lot more time to start, I got an error that talked about my control center catalyst having an error and does not and that nothing would be open to all.  After the merger with different ideas on how to solve the problem, I dropped and it factory reset.  This fix has worked for the whole two days were once again, I got the same problems, I did another reset and when it does not work I gave up for a while.  About two weeks ago, I again have to reset it and then updated for windows 8.1through microsoft dreamspark.  This seemed to fix my kind of problem, the same questions (not counting control catalyst who never returned after the update) would be upward if I have it plugged anything in the USB drivers.  Now for some unknown reason which was not the case for my wireless mouse which worked just fine.  If at this point, I have a mouse plugged wireless and no problem whatsoever.  One day I shut down my computer with the mouse is always plugged (I never do usually) after I do all my troubles to come back but enlarged.  I tried to do just a refresh of windows but it says that my hard drive is locked and let be honest I really want to keep refreshing and resetting my laptop and lost al my stuff.

  So now, here's a list of my exact problems in most occuences recentof, now:

  -Slow start and typing in my password take like five minutes to register that I typed in fact anything

  -l' unlock screen is for like five minutes

  -My Office take a good ten mintues to load all my icons and others

  -J' have a popup that says IEWebsitelogon, not having that take a long time to close

  -EACH window is delay, that is difficult to change their size, move about minimize, close, etc...

  -Every thing take > then five minutes for open including Manager, start menu task

  -Much more delay and related issues

  What is one thing to hard drive? They are not too expensive to replace, so I can get another copy of the win8 form my school so if that is the question that is very well.

  I really need help, my computer is basically usless, I am a student I need my computer please help me.

  Hello

  As you probably know, the error code 24 characters for short drive Self Test (DST) would indicate that hard is defective and must be replaced.  It is also entirely consistent with the problems of performance, as you describe in your initial post.

  If there is no help, the player at the link below is an example of one that would be perfect for your laptop.

  750 GB hard drive for laptop.

  The procedure to replace the hard drive begins on Page 56 of your & Maintenance Guide.

  Kind regards

  DP - K

• application checker work does not correctly

  I get a message "verification of the application does not work correctly" for awhile.

  For this reason, it seems my itunes and other programs will not work either.
  This only happens on my user account that I am the administrator, I think. can't find a solution. can anyone help? is this a microsoft problem? someone phoned me and said they call for help on a reported error, I didn't trust it.
  I brought it to my local computer shop and they couldn't find or fix. It's a little weird and I need a solution please

  Hi RitaMoore,

  ·         When exactly do you get this error message?

  ·         You get this error during a launch of the application?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Step 2: If the problem does not persist in SafeMode with network, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After the boot minimum troubleshooting steps, follow step 7 in the link to return the computer to a Normal startupmode.

  Method 2: Create a new user account.

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  If the problem is resolved in a new user account, and then follow the article on how to fix a corrupted user account.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• PrintScreen of Windows 7 doesn't work does not correctly

  Not sure if it is in the correct category but... I downloaded Windows 7 Pro 64 - bit from my school DreamSpark account and installed on my computer, which is pretty old about 5-6 years.  There should not be anything wrong with the copy of Windows, it is not a debug or whatever it is, it's just the regular retail copy.  Almost everything works fine except for a few small quirks/bugs.  First of all, I can't preview images using the Windows Viewer, it displays simply all the rectangles fully black images.  However, if I open an image to preview in Image Viewer, and then click full screen/slide show then it displays the images as should be in full screen.  And then exit fullscreen Gimme the picture in black and white.  Not a particularly serious issue just annoying really.  In addition, perhaps in relationship I guess, I recently discovered that my Windows PrintScreen does not work.  When I hit PrintScreen, or any variation of the PrintScreen key combination, it captures just a large black rectangle, as if my entire screen showed only in black.  I tried to paste my Clipboard into Paint and Photoshop and both give me a black monitor rectangle size, it's really weird.  I even tried a third-party screen capture software and it's the same thing and I can't find anything even close to relevant on the internet.  Anyone have any ideas, anything is appreciated.

  Another separate problem: when I turn on my computer, it will sometimes, not often but enough times to be meaningful, decide to not turn it on and recognize my keyboard and I have to restart and I hope that he do it again.

  Last thing, I swear (I should probably do different missions).  My computer, as in my windows, does not sleep properly.  Sometimes, he won't in the mode 'sleep' and every time I try and wake him up it gives me a white, white I think, screen instead of the login screen.  If I press space to unlock my computer, because there is no password, it will take me on my desk but he will not recognize my internet connection ethernet or my desktop speakers and I have to restart my computer to get these features.  Once again a lot of what I think are really weird problems.  Any ideas on any of my problems is greatly appreciated.

  HI -.

  Run the Windows 7 Upgrade Advisor to see if any conflicts are listed:

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check the support site of your system manufacturer for a BIOS update and other updates to the device driver for Windows 7.

  Kind regards...

  jcgriff2