MouseOver/out buttons get 'Stuck '.

I'm trying to create simple animated buttons with mouseover effects. However, I have noticed that they are 'blocked' if I mouseover/mouseout/mouseouthandler() of them too soon. The example files are below.

http://www.mediafire.com/download/3az1dw544u17atb/test.zip

I saw another thread here, which seems like it might be the solution to my problem, but when I try the code example with my layout, buttons animate at all. The thread I'm talking about is:

http://forums.Adobe.com/message/5428765#5428765

At the moment, I was just using the code snippets to play since, for mouseover and mouseout/mouseouthandler() State, play from the beginning of the timeline to the status label 'up' when someone will fly over a button, then stop. Then for the mouseout/mouseouthandler(), I use a play to play 'up' State to State 'down' which is the end of the timeline. But if I mouseover or outside while he is in the middle of an animation, it seems live things. Any ideas would be greatly appreciated.

Dear neohtom

you just need to add the mouseleave & mouseout/mouseouthandler() with the same script in your button1 > Action

I did it for you, you can check it out here:

Link to your project: http://www.mediafire.com/?wmmn6609hwyqnqv

Zaxist

Tags: Edge Animate

Similar Questions

  • iPhone 5 button gets stuck

    Lately my iPhone 5 button crashes is one problem with others?

    Which button? There are 4 buttons and a switch to the iPhone; House, volume up, volume down, sleep/wake and the "secret" key.

  • When I turn on my computer, it gets stuck on the ultra-portable gigabyte 3 screen and custom which leave me there 2 hours still no luck the only button that works are TAB rebooting too

    Original title: stuck

    When I turn on my computer, it gets stuck on ultra-portable gigabyte 3 screen and custom wide movement which I gave 2 hours still no luck the only button that works are TAB restart too it can someone help please

    Follow these steps:

    Step 1: Start the computer in safe mode and check if the problem persists.

    A description of the options to start in Windows XP Mode

    http://support.Microsoft.com/kb/315222

    Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

    Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

    After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

    (a) click Start, run.

    (b) type msconfigand click OK.

    (c) the System Configuration Utility dialog box appears.

    (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

    (e) when you are prompted, click on restart to restart the computer.

  • Not all facilities of the extension. They get stuck at < nom_extension > ' will be installed after Firefox restarts." Restarting Firefox does not change this

    I've always been able to install extensions with no problems until a few days ago. Since then, the extension installation process gets stuck to where they appear in the list of extensions (topic: addons) with the message < name > "will be installed after you restart Firefox." Restart of Firefox has no effect on this point - after that restart, the extension still says "will be installed after Firefox restarts." I tried several restarts Firefox and I tried to install other extensions, and the same thing happens with all I'm trying to install the extension.

    I know I'm running an outdated version of Firefox, but please ignore this. I have a good reason for it.

    It is possible that there is a problem with the files that store the registry extensions.

    Delete the files (extensions.json, extensions.sqlite, extensions.ini) extensions.* and compatibility.ini in the profile folder of Firefox to reset the extensions registry.

    New files will be created if necessary.

    See "extension corrupted files:

    If you see disabled extensions or is not compatible in ' Firefox/tools > Modules > Extensions ' and then click the Tools button at the left end of the search bar to check if there is an update available compatibility.

    If this did not help, then also delete the files addons.json and addons.sqlite possible.

    You can check for problems with preferences.

    Delete a possible user.js file and files numbered prefs-# .js and rename (or delete) the file prefs.js to reset all the prefs by default, including the prefs set via user.js and pref which is no longer supported in the current version of Firefox.

  • Cannot connect to Youtube. The first page load, try to register and gets stuck in a loop.

    Pretty much what the title says. I try to load Youtube, and during the initial page load, it automatically attempts to connect. I don't know why, but it can not open my session and gets stuck in a loop. I don't have the patience to see if that solves finally itself, especially when I can sign very well in other browsers. The same thing happens whenever I try to connect to my Google account, as Youtube is related to Google.

    Many issues of the site can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.

    Note: This will be temporarily you disconnect from all the sites that you are connected. To clear the cache and cookies to do the following:

    • Go to Firefox > history > clear recent history or (if no Firefox button is displayed) go to tools > clear recent history.
    • Under "Time range to clear", select "all".
    • Now, click the arrow next to details to toggle the active details list.
    • In the list of details, see the Cache and Cookies and uncheck everything.
    • Now click the clear now button.

    More information can be found in article to clear your cache, history, and other personal information in Firefox .

  • I bought the open eBay UK C, when I open my emails to gmail, the device gets stuck refreshing. I can't see the content of mail

    I bought the C open on eBay UK. I can see the list of my emails on the device, but when I click on the email address it gets stuck refreshing and I see no content of mail.

    I reset the phone and also to run an update of the software via the relevant application on the device.

    Please can help you? Thank you.

    I had a similar problem with the ZTE open running v1.1. I was not using Gmail, but my own IMAP provider. It turned out that my desktop e-mail client (Thunderbird for Mac OSX) created a strange trash where it shouldn't have been. Once I deleted this file, the phone worked again.

    You use a desktop e-mail client? Make sure you check the settings IMAP, especially how map you your trash folder on the desktop. Make sure that you store your messages deleted on the server.

    This is what solved the problem for me, and I stopped using Thunderbird.

  • 15.0.1 Mozilla gets stuck. You click on the links and nothing happens. No wheels spinning, nothing. I open Firefox in a new window, the same thing. I can fix it onl

    15.0.1 Mozilla gets stuck. You click on the links and nothing happens. No wheels spinning, nothing. I open Firefox in a new window, the same thing. I can only fix it by starting the Task Manager and close all Firefox Windows. [When I launch Internet Explorer, there no problem.] Thanks for your help!

    Clear the cache and cookies from sites that cause problems.

    "Clear the Cache":

    • Tools > Options > advanced > network > content caching Web: 'clear now '.

    'Delete Cookies' sites causing problems:

    • Tools > Options > privacy > Cookies: "show the Cookies".

    Start Firefox in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

  • Satellite T130 - 10G Touchpad screen pointer gets stuck in random patterns

    Satellite T130 - 10G Touchpad screen pointer gets stuck in random patterns and laptop computer must be restarted to restore functionality
    The center of the causes of "touchpad button" toggle switch by pressing the touchpad pointer to enter a random State like two fingers to zoom.

    Sometimes, he'll be back to normal, but most of the time the computer should be put to sleep or restarted to restore functionality.

    a. I tried turn off all touch pad feature one item at a time and all, he still has some weird random State.
    (Did not try the impossible combination need $ to be interested but went to the 90% level)

    b. I tried disable the touch pad buttons offending and only using the mode tap the buttons and the problem still persist.

    c. Finally, tried bending the entire keyboard instead of pressing the buttons and it has also created the problem.

    This leads me to believe either the power key or flexion of the entire keyboard is originally is

    a. flexion of the touch pad causing the driver getting into a crazy State or require a recalibration.

    b. electrical connections causing the driver enter a crazy State or require a recalibration of bending.

    Note: I have reinstall the latest version of the driver.
    Also: American Toshiba support site that this problem exists in the notebooks of May.

    Also: The touchpad is too sensitive, which makes it very unusable!

    CAry

    Have you tried to install the operating system and check the functionality of the touchpad with the factory settings?
    Recovery image contains tested the touchpad and right and I don't think that helps the driver installation.

  • Satellite P10 TV OUT button does not

    Can someone help me, I recently rebuilt my laptop Satellite P10 and now noticed the TV OUT button on the side right does not work. The OS is XP PRO

    I can use the F5 key, but who want to get this dedicated button works, someone at - it ideas

    See you soon

    Dave

    Hi David,

    When you have rebuilt your laptop you re-install the operating system and all the utilities Toshiba? I think that the button that you are talking about is controlled by the Toshiba EasyKey utility.

    HTH

  • TX2-1020us digitizer cursor gets stuck 1cmx1cm of the upper left corner

    I have a tx2-1020us

    Sometimes, the stylus cursor takes over and gets stuck about 1cmx1cm from the upper left corner of the screen if the screen is 90 degrees or to move away it from the keyboard when you use it as a laptop. If less than 90 degrees, when this happens, it's somewhat usable but the slider still jumps at the skylight at random.

    I've known as a locking of the keyboard once but removing the power and the battery it is resolved.

    To troubleshoot, I ran the HP and N-trig utilities and they found no problem so even the question that happens. I downloaded the latest drivers from this site and install, I searched on Google and Asus seems to have a similar problem but I don't know if this applies. Sometimes, when I reboot it goes far, other times it is not. Deactivation of the first N-Trig driver stop the question but then of course, do not work the key features.

    I installed the software (for most, MS Office, Corel PSP and NeatWorks) and installed a scanner NeatWorks and GPS MS on it since I bought it last Friday (not connected when it is the case).

    Has anyone else seen this, they are of a resolution, I would stay before 15 days runs out?

    Problem solved!

    Turns, I have a desk lamp fluorescent light about 15 cm from the laptop.

    When the lamp is on and the laptop is plugged in, it does the cursor thing erased. Unplug the laptop or move the lamp 25cm and everything works perfectly. Go figure.

  • State machine gets stuck (small problem)

    Hello

    I have a problem with the state machine, I have atteched dummy code that my problem can be considered. When I hit the exit button and the menu popup appears, the YES button works as it should, but when I type no., my program gets stuck. I tried initializing controls, but no effect

    Thank you for your help.

    I think it will be easier to use a case OPI event.

    Jean-Marc

  • When I try to send an e-mail message in Outlook Express 6, it gets stuck in the Outbox and is not sending.

    Help!  When I send a message it is said there is a mistake, but there is no error and he actually sent the message.  It gets stuck in my Outbox and if I don't delete it will continue to send over and over again!  What can I do?

    original title: OUTLOOK EXPRESS 6 - problem

    You have apparent dbx file corruption.

    Spend most of your messages out of the Inbox and then create new folders to send and sent items box after having moved the messages you want to save to a local folder that you create.

    Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.

    In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.

    With OE closed, find the DBX files for the items in the Outbox and sent and delete them.  New ones will be created automatically when you open OE.

    After you're done, followed by compacting your folders manually while working * off * and do it often.

    Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.

    General precautions for Outlook Express:

    Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.

    Information on the maximum size of the .dbx files that are used by Outlook Express:
    http://support.Microsoft.com/?kbid=903095

    Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
    http://www.oehelp.com/OETips.aspx#3

    Why you don't need your anti-virus to scan your email
    http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm

    Note that for some AV programs, it may be necessary to uninstall the program and reinstall in custom Mode and uncheck analysis when the option is the result of e-mail messages.

    Compact often as specified above.

    And backup often.

    Outlook Express Quick Backup (OEQB Freeware)
    http://www.oehelp.com/OEBackup/default.aspx

  • PPT. gets stuck and never opens

    Original title: ppt.

    I recently had a new hard drive put in. Now when I try to open my ppts. (all of the 07-1, he goes to the Media Center and gets stuck and never opens.) I have to go to programs, and then click powerpoint viewer every time?

    I just want to get rid of Media Center as I do not use it. Thank you

    Find one of your files version, right-click on it and select open with > choose default program

    If the Powerpoint Viewer is listed, select it.

    Otherwise, click on the button 'Browse' and navigate on it (you can probably find pptview.exe in C:\Windows\Program Files\Microsoft Office\PowerPoint Viewer).

    Don't forget to check the box "Always use the selected program to open this type of file."

    Click OK.

  • If I work for an hour or more first the cursor starts to behave correctly and then the program gets stucked

    my pc is stuck. I doubt that the fan provided within the system does not work. The problem is if I work for an hour or more first the cursor starts to behave correctly and then the program gets stucked and the pc needs a forced closure. And where the driver is placed at the bottom is very hot.

    Original title: Stucks

    Hello

    In addition to becoming the fan if it does not, if it is a desktop computer, clean the inside with a can of compressed air.

    If it's a laptop, check the vents for hair, dust, etc. and do not use a laptop when it is based on material surfaces: bedspreads, blankets, etc.

    If the problem persists, if this is a laptop (as you say only pc, no office or laptop), take it to a local computer and reliable repair shop and get them to open and clean the dust inside...

    Here is an interesting discussion about the reasons of your problem (IF your laptop):

    http://PC-trickandsolution.blogspot.com.au/2011/07/fix-laptop-overheating-shutdown-problem.html

    NB: > however 9 out of 10 cases of overheating are caused by obstruction of the air flow.

    See you soon.

  • converting file from Microsoft money 2006 to 2007 it gets stuck and says 'work '.

    I use Money 2006.  I bought Quicken only to find out that it can only convert Money 2007 or later versions.  So I purchased Money 2007 and upgraded successfully.  Then, I tried to convert my file in Money 2006 to 2007.  I opened the file 2006 and she asked my password as usual.  After that I put in, need me a screen that says "for updating your money file.  It is said that money will convert my file so it can work with it in 2007.  And you're supposed to click on "next".  When I do it says it 'work', but it gets stuck there and nothing happens.  Any ideas?

    Support of Microsoft Money forums:

    http://social.Microsoft.com/forums/en-us/money/threads

    They will probably have a better answer.

Maybe you are looking for

  • HP Slimline desktop computer - 450-a103: lost the power adapter

    Hello I lost my HP Slimline Office 450-a103nl power adapter. Anyone know the part number to buy a new one?  220 - 240Vac outlet Italian European. TNK in advance Roberto

  • Y510P 755 m SLI

    Here's the SSD, should I be looking at? http://www.scan.co.uk/products/120GB-crucial-M500-m2-2280-D2-b-m-SSD-6GB-s-read-500MB-s-write-130mb-...

  • transitions - possible bug in VBAI 2012

    I have an application in which I measure the diameter of a piece in a State and then make a selection of tests in differrent States. The transitions are set to the value of the diameter (circular search Edge 1 - diameter (Pixel). If we transition1 do

  • Key Pirate me XP will now impossible to activate and save

    Hello I bought XP Home years... always have my key.  Last year, I bought a new hard drive and I bought a new copy of XP HOME.  Unfortunately, the new copy installed great but it was a pirate copy, now when I try to save the key provided, it still fai

  • How to stop external connections to my wireless network?

    original title: internet Stop thief My neihbor connects to the internet using my connection. How can I secure mine to stop this? * original title - my neihbor connects to the internet using my connection. How can I secure mine to stop this? *