MOV is black and audio only

Similar Questions

• Why can I not print in black and white only?

  Why is the HP Officejet Pro 8600 more unable to print black and white only if the black cartridge is not empty?

  What I mean is that I went into the settings to set the printer to print black and white only but also print text in black only.  Yet, I HAVE to replace the cyan, magenta and yellow cartridges, because they are exhausted.  Nothing to do with black printing, whereas a SEPARATE black cartridge is and is always full should cyan, magenta and yellow ink?

  I'm aggravated about how the driver for this printer is designed TO FORCE me to buy cartridges not black when I deliberately put printing be BLACK ONLY.  I'm unable to move forward with my impression.  This is considered to be a show-stopper and is unacceptable as the setting that I've assigned and exhausted cartridges message contradict each other.  If the adjustment is made for print in black and white only including text, then print black and white, because I know that the black ink is still available.

  Take into consideration that printing may take place at any time.  Not being able to use black as my other color (WHICH IS NOT EMPTY AND IS A SEPARATE CARTRIDGE) forces me to stop.  I can't go forward until the store open.  Wal-Mart isn't always an option.   It's lost time.

  The inability to switch to self-supply to meet to use the black cartridge is only a waste of time.

  Call it for what it is, a form of ransom. HP wants me to spend the money on the color cartridges that have nothing to do with black and white printing.   When I am ready to print in color, which should be a time of my choosing.

  Either way, the form, which I am trying to print is black and white only.  No color is on this form.  It is foolish to force printing in color to a black and white document.

  Hello

  Specially protect the print heads printers much NEED other inks even they only print in black. During the warm-up process, printers require all inks so they can stop before we continue. Some printers allow printing (especially those who have the ink tank three colors), but they can print at a speed of snail baby.

  Kind regards.

• Printing black and white only?

  HP Officejet Pro 8620

  Is there a way to make the printer print black and white only?

  Hi oldstrings,

  You can change the characters to print grayscale (using a black ink only).

  I extracted the advice of setting of printer for windows and mac.

  Alternatively, you can check out the link to reference guide user below.

  http://h10032.www1.HP.com/CTG/manual/c04204791.PDF

  See you soon,.

  Bryan

  

• printing in black and white only on the all-in-one HP Officejet J5780

  I am trying to print page 2 of an article of web in plain black and white.  However, the upper part of the page is red on the web, the main part is black and white only.  No matter how clearly, I insist that I want simple black and white, what I get is the page, printed in red.    The printer does not do what I ask.  How can I fix this?

  Hi daniel199,

  You get the same problem when you try to print from another internet browser?

• OFFICEJET PRO 8600: PRINTING BLACK AND WHITE ONLY

  Printer does not print in black and white only, even if this option has been selected by "Printer properties" or "Printer Preferences".

  Please read this post then provide some details.  There the error messages on the computer screen or the printer?

  The Officejet Pro 8600 series has separate heads for printing and ink supplies.  To protect the print head of damage the printer requires all inks to be present to print in black only.  If one or more of the inks are exhausted, they must be replaced to allow printing.

• Printing black and white only (no gray scale)

  I have a Windows 7 (64 bit) system with the HP Deskjet 990cse printer.

  With Windows XP, I was able to print black and white only (no gray scale), but now with Windows 7, it seems that I can't print black and white only (no gray scale).

  Is it possible to print black and white (no gray scale) with a Windows 7 (64 bit) system?

  Great Information BOB!

  @n__l__b, let me know is post bobs solves your problem!

• Recorded movie has no video, audio only

  I downloaded Movie Maker live 2012 in Windows 7. I tried to save movies in all formats, but it plays only no video and audio. He played well in the preview, however.

  Hi J, volunteer

  I thank very you much for the detailed response. I tried the change after the format conversion, but the problem remains the same.

  ================================================
  Have you tried to play the file in Windows Media Player?

  There is an older version of Movie Maker which runs
  on Windows 7... It might be worth a try:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Windows Movie Maker 6.0 on Windows installation 7 or 8
  http://movies.blainesville.com/2010/05/installing-Windows-Movie-Maker-60-on.html

• An excerpt of the works; Out published is all black and audio fails (.exe and .swf)

  Videos of original demonstration were CP4, I convert to CP5 and added audio.  Preview mode displays everything as planned.  When publishing to a local location in .exe or .swf does is display a window where the movie should play, but it's completely black.  Audio begins to play but stops at the same time the screen goes black.  I uninstalled and reinstalled Flash Player 10.  I tried to change the parameters of quality of high (24 bit) for bass (8-bit), but that has not changed anything.

  I successfully updated and published previous ot CP4 CP5 videos.  Not sure why the 3 latest video updates, I've tried fail.

  If anyone can offer any assistance, it would be much appreciated.

  Thank you, Julie

  Hi Julie,.

  If your project contains animations of text and you have the latest version of flash Player (10.1.102.64) the problem is known and it is resolved, please please follow the steps mentioned in the following blog to solve the problem.

  http://blogs.Adobe.com/Captivate/2010/11/solution-for-CP5-content-not-working-with-the-LAT is-flash-player - version.html

  Let us know if this solves the problem.

  Remi - Ashwin B

  Adobe Captivate team

• Color LaserJet 2605dn printing black and white only

  I have a Color Laserjet 2605dn, and all of the color ink cartridges have run dry. However the black cartridge has more than 2,000 pages of ink in the printer and it won't let me prink only black and white. It seems that the color cartridges must also have ink in them so that the printer to print. Does anyone know a work around so that I can print with the black cartridge and not buy color cartridges?

  Hello

  Thanks for the post.  I have attached a link below that can help.  Good luck!

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en & CC = US & TaskID = 110 & prodSeriesId = 1140727 & prodTypeId = 18972 & prodSeriesId = 1140727 & objectid = c00660239

• Sort of printing black and white only when magenta cartridge is empty?

  We have a HP Office Jet Pro 8500 a. computer running Windows Vista.

  The Magenta cartridge is currently empty, and we need to print an urgent document before we will be able to get a new cartridge.

  While trying to print a black and white document only, the following error has occurred:

  Exhausted ink cartridges

  HP 940 Magenta

  The cartridges listed above must be replaced to resume printing.

  HP recommends that you do not remove an ink cartridge until a replacement is ready to install.

  Specified in printing dialog windows that we want only black and white, but it is still received this error message.

  Is it possible to adjust the printer settings to specify explicitly that you want to use black ink?

  Thanks for any help you can give.

  This printer takes individual ink cartridges (IIC), and this ink delivery system requires that all cartridges to be installed for the printer to work. You can set the printer to "Using black ink only", but that must be done before a cartridge is exhausted, that the printer inks for other uses in fairest impression. It also uses the ink for the maintenance of the print heads. Here a link to a document that turns to explain various ways that ink is used in a printer beyond just printing.

• How can I make my officejet 6500 a print in black and white only?

  I am trying to print documents, not photos, in black and white.  The computer is a Macbook Air.  I'm looking for the manual, and I don't see how to set up printing black and white document WITHOUT PRINTING FAST current of AIR.

  Thanks a lot for helping me with this.

  I prefer, if possible, to make the default for printing black and white documents (which are not fast drafts). ***

  Hi @presentmomentum,

  Thanks for getting back to me.

  Here's how to adjust the color temperature:

  When you go to print a document, click on "Show details" (next, where it says PDF). Then click on 'TextEdit' and click on 'Type/quality paper.' From there, you can select the grayscale, black and white or color and toggle various levels of quality (Normal, Best project). If you use the grayscale function, you can choose just to use the black cartridge only.

  Let me know if it helps. If I helped you to solve the problem and that you liked this post, feel free to give me virtual accessories by clicking on the "Thumbs Up" icon below by clicking on "Accept as Solution" (this will help others find the solution).

  Thank you for being a part of the community of HP.

  Have a great day!

• I want to print in black and white only on my hp photosmart 6520

  Photosmart 6520 windows 7 How do I put this so it prints only in black and white not color at all times.

  Hi macys.

  Welcome to the HP forums!

  Implemented a Photosmart 6520 for black ink only from your Windows 7 computer? That I can help with

  You will want to start devices and printers (via your control panel) with access to your folder and right-click on your Photosmart 6520 icon and select Printing Preferences. The window that opens will be similar to the display on the left of the screenshot below. On this screen you click the Advanced button, and then you will see a screen similar to the one on the right of the screenshot. There, you go the black ink only setting and press OK. Press and then apply on the previous screen before pressing OK again. The driver will now be on use black ink only.

  

  Let me know if that does the trick for you!

• 6520 photosmart all-in-one: can't get Photosmart 6520 to print in black and white only reliable

  I'm trying to get the 6520 Photosmart of HP all-in-one to print only in black and white. I followed the instructions in the manual (go to the preferences of the printer by selecting "Black ink" only 'Print in grayscale,' hit 'Apply' and 'Send'.)

  Now, if I do a table in the word processor Open Office and fill the cells with different colors, they print in black and white. Bonus. This is what I want. However ... When I print a page of Open Office spreadsheet (the ultimate goal), there are all the cells, printed in color of life.

  That is what it is? How can I fix?

  Afternoon @MSWS,.

  I can help you with the printing settings in Open Office.

  It seems that this program has its own options that can bypass the default print settings.

  I found this page of support which may help you with the settings. OpenOffice - control print  

  Thank you

• Color photos are considered black and white only

  So I took cottage holiday color photos, with my point and shoot digital camera. Just downloaded to computer. The tab 'pictures' are in color, but when I open each photo individually, he appears only in black and white. Help!

  So I took cottage holiday color photos, with my point and shoot digital camera. Just downloaded to computer. The tab 'pictures' are in color, but when I open each photo individually, he appears only in black and white. Help!

  =============================================
  No guarantee... but following Microsoft "don't fix" may be worth a try:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Windows Photo and slideshow problems
  http://support.Microsoft.com/GP/windows_photo_and_slideshow_diag

  Good luck...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• All-in-one HP Deskjet 2540: How do I set the default to print in black and white only

  The manual says this, but it applies to a PC and I have a Mac:

  "If you want to print a black and white document using a black ink only, click on the Advanced button. Printing from the drop in grayscale, select black ink only, and then click OK. »

  Someone knows how to set the printer to print only black & white for a Mac?

  As an accompaniment, there are security settings that must be configured to reduce the risk of access remotely for the printing device?

  Thank you

  Hello
  Follow the steps below to print using black ink only:

  1. from the application used to print, click the file menu and select print.  The print window is displayed.
  NOTE: The print window might be minimized: click Show details to display all available parameters.

  2. to access the color options, click in the area of selection below, listed as the name of the program (e.g. TextEdit)
  Will appear as Copies & Pages within Microsoft Office applications.

  3. Select Type/quality paper in the menu dropdown.

  4. click the triangle next to color Options of spending parameters.

  5. set the color to grayscale field.

  6. set the Mode to grayscale in black cartridge only.

  You can save the settings for later use by clicking preset > save current settings as preset... Once you print using the saved preset will remain by default up to what we will choose another preset.