move a program.
When you move a program to the desktop for example Windows Media Player or Photoshop, you can see the program while moving. Now, I see a black movement of the outer marker and not the window itself showing the content.
Take a look on:
Click
"Content windows Show while dragging" is checked? If it isn't, it check and click on
Who help me?
Tags: Windows
Similar Questions
-
I want to move a program from one hard disk to another is possible?
I want to move a program from one hard disk to another is possible? I have the original disc to the software, but it is damaged. The hard disk that contains the program barely works, so I need to transfer all the programs and data to another drive. I used the transfer Assistant, but that will not transfer this program?
Unless you make an exact copy of the installation CD, I'm not sure there is much else you can do.
You can always try using a cloth and wipe the disc from the Center outward. That might do the trick. Or you can use a program like IMGBurn and create a new CD and hope for the best. Other than that, I'm ideas.
IMGBurn:
-
Go to sky
When using Sky go and try to watch movies or programs how do I get to run continuously without interruption and catch every few seconds.
The usual cause of this is that your broadband connection is not fast enough or you have multiple computers, try to use it at the same time.
This allows to check your speed broadband http://www.bbc.co.uk/iplayer/diagnostics#results
If the broadband speed does not seem to be the problem, please contact Sky
-
How to move Windows program from Windows.old files after you do a re-installation of my Vista Home Premium? Can I move the program files or do I have to reinstall each program with the cd that came with the applicable programs? I know how to move all the other files. I do not know how to move the program files. Thank you in advance for help you.
You can't move programs from Windows.OLD. The programs need to be reinstalled.
Sorry, but that's how.
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Error in import of my. MOV video file in the Windows Movie Maker program.
I tried to import my videos in Windows movie maker program and I still get the following error message.
The file . MOV cannot be imported because the codec required to play the file is not installed on your computer. If you have already tried to download and install the codec, close and restart Windows Movie Maker, and then try to re-import the file.
I downloaded a software called of 1.40 of Prism of the internet and the software allowed me to make the format change .mov to .avi, however; When I played my video, she played in slow motion.
Can someone help me with what needs to happen. I used the format .mov since 2008, now all of a sudden, I got the error above in bold.
Signed. MOV needs HELP of AVI!
Hi Michaelle1,
· You did it of any material changes or software on the computer before this problem?
· Do you have any third party media player and codec installed on your computer?
Temporarily uninstall them if you have any third-party media player installed on your computer and check if you are able to import files video .mov in Windows Movie Maker.
Secondly, if you have any third-party codec player installed temporarily uninstall them and check.
To uninstall codec and third-party multimedia player, you can use the Windows Cleanup utility.
Download and install the Windows Installer Cleanup utility from this link:
Description of the Windows Installer Cleanup utility
Now, run the utility ("' start > all programs > Windows Installer Cleanup" "). In the list of programs displayed in the cleanup, select programs, and then click on remove. Quit out of cleaning.
Or uninstall programs feature & programs in Control Panel.
Uninstall or change a program
http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program
Reference:
Import video, photos and audio on Windows Movie Maker
A problem of importing files into Windows Movie Maker
Hope the helps of information. Please post back and we do know.
Concerning
Joel S
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Is it possible to remove the "Windows Movie Maker" program?
I do not have a film or a video camera of any kind, and never, I won't buy one. I'll never have no reason to use the "Windows Movie Maker" program, which is an OEM program in my computer. It would be nice to delete this program? Thanks for any advice on this subject. Janice M. Strunk
I do not have a film or a video camera of any kind, and never, I won't buy one. I'll never have no reason to use the "Windows Movie Maker" program, which is an OEM program in my computer. It would be nice to delete this program? Thanks for any advice on this subject. Janice M. Strunk
=============================
Windows Movie Maker 6 is included in Windows
Vista... it is not a third-party program that has been
installed by a computer (OEM) manufacturer.The best would be to leave it as what
BTW... you can use it to create video slideshows
with your shots again... maybe something from you
could find a use for.Windows Vista-
Demo: Create a slide show with music in Windows Movie Maker
http://Windows.Microsoft.com/en-us/Windows-Vista/demo-create-a-slide-show-with-music-in-Windows-Movie-Maker John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *. -
DVD Movie Maker program overview only 4 of 22 photos
original title: DVD Movie Maker program
I have 22 pictures in DVD Maker file but when I go to preview it will show only 4 photos in a continuous loop?
Why not all 22 pistures will display?
It is a question about Windows DVD Maker, not Movie Maker... but I'll try to help.
You watch the actual movie, or you look at just the menu? Looks like you have chosen an opening animation which is your menu as the DVD player is waiting for you to press Play.
If you do not want a menu (with some of the photos included), then on the first page (the first page where you give the DVD a title), go to the Options in the lower right and choose to ignore the menu and go directly to the film.
-
How can I safely move a program to another hard drive partition?
My C:\ drive becomes low in space so I want to move some programs on my external hard drive. Can I do this without any problem?
You can install programs on an external hard drive. Moving programs is a little more complicated. You must install them out of their current location and re - install the new.
You want to do it "without problems". It is not so easy. If the program is correctly installed on the external drive and at a later date, the unplugged drive problems might appear. To be re-connected, in some circumstances, the player will be given a letter from different player than before. The program will become unusable until this that deleted and reinstalled. Similar problems can occur according to the habits of functioning.
So, Yes, it is possible, but it is not recommended.
Tom Ferguson
-
Campaign: 'add to program' c. 'move to program.
I have a very simple campaign - send an email to an audience, and then add the contacts that have been sent to SFDC. My question is whether to use the action "Add program" or the "move to program" campaign to update SFDC program. I guess that's a pretty basic question, so a pointer to a discussion on the differences between the two actions would be useful for me.
Hi Peter,.
You'll want to use the "Move to Program" action to transfer the Contact record in your CRM up-to-date program.
Move/add to the campaign could be used to still feed (another campaign on the Web of campaign) and Move/add to the program for the management of data (a program Builder program), such as the cloud connectors, a lead scoring Program, program updates to CRM, etc.
Move removes the Contact between them and this campaign in the other campaign/program. Add maintains Contact in this campaign and between them in the other campaign/program.
Hope that helps!
Gaia
-
How can I move my program on my computer to my cRIO
I noticed that my program slows down the computer over time. I want to move it to the cRIO I. How can I do this?
Hello
When you work with cRIO you normally have your main code running on your target cRIO and a GUI running on your host (if necessary).
If you want to move your main code to the cRIO, you must identify what part of your code can be placed on it. Once you have done this, you must create a project and develop the application that will be deployed on the cRIO. You can use this article as a reference to develop your application.
Kind regards
Miguel Fonseca
Technical sales engineer
National Instruments
-
Trying to save the profject ended up like a movie .wmv to my computer, it says «save on removable CD...» "but it is actually doing nothing. He has never done this before. It is also not working well even to work on project files. Something is wrong with her, and I would like to reinstall or repair, but can't find it anywhere on Microsoft Download pages. Any suggestions?
Movie Maker is installed with Windows XP... There
not a separate download. Also... it is updated
with the SP2 of Win XP and Win XP SP3.I suspect that the maintenance of the system would
more to improve the function of Movie Maker that
He would reinstall.FWIW... better run on applications of editing video one
machine is well maintained and fully implemented to date.You may have reached the limits of your system
resources. Run the error checking, defragmentation and
Disk Cleanup on a regular basis could help.And... disconnect the net and the closing of all
programs, including your scanner for viruses before
Opening Movie Maker can free up some resources.Add more RAM, increase the size of your
Swap file and maintain a hard training that
a 50% or more of free space can help.And you can have compatibility issues with your
source files. Several formats are apparently compatible
with Movie Maker, but the most reliable choices are:Photos - bmp
Video - wmv or dv - avi
Audio - wav, wma, wmvIt is also possible that you have a problem with one
video driver is damaged or outdated.Try to reduce your graphics hardware acceleration
in accordance with the instructions in the following article.How to put in back of graphics hardware acceleration
http://www.pptfaq.com/FAQ00129.htm
(scroll down to: "If you are using Windows 2000 or XP")If they improve the question, you should look for the
site Web of MFG. your video card
an updated video driver.And... the info might be worth a visit:
===
The following steps previously offered by
Carlos, MCSE is supposed to reinstall
MM2.1.(you will need your Windows XP disc)
1. go in C:\Windows\inf
2. right-click on Moviemk.inf and click on install
3. when it asks for your put Windows XP CD
It in and find the I386 folder. Click OK
===Also... reinstall Windows XP SP3 should reinstall Movie Maker.
(FWIW... it's always a good idea to create a system)
Restore point before installing software or updates)Windows XP Service Pack 3 network install package
for developers and it professionalsMore information:
What can I do if I have upgraded to Windows XP SP2 and Windows
Movie Maker 2.1 is not installed successfully?
http://blogs.msdn.com/b/deanro/Archive/2005/01/18/355050.aspxMovie Maker 2.1 Installation
http://www.Papajohn.org/mm2-setup-software-2_1.html -
How can I move a program from one letter to the next?
My drive is running out of memory & I want to spend a great program to a different drive letter. I have windows xp installed, service pk 3. How can I do this?
Due to the unpredictable registry entries that create programs to install there where are stored other files associated with this program, the only safe way to move a large program on a different drive is to uninstall your current drive (Control Panel-> Add/Remove Programs) and reinstall it to your replacement meter. There is no easier way to move unless the manufacturer of this program has provided a utility to do this.
HTH,
JW -
How to move the program non-system to C: directory to another
My c: directory is running out of space. So, I need to move some non-system files/folders to a different directory, namely the d: drive.
I don't know how to do it.
I use to have a program that could do it for me, but I can't find the CD he was on, and I don't remember the name of this program.
I need detailed instructions on how to do what I have to do.
There are a few MS programs I have ever used either but they are part of the system (Vista) program. Is it possible to remove them? This could free up a lot of spave on my c: drive.
My c: directory is running out of space. So, I need to move some non-system files/folders to a different directory, namely the d: drive.
I don't know how to do it.
I use to have a program that could do it for me, but I can't find the CD he was on, and I don't remember the name of this program.
I need detailed instructions on how to do what I have to do.
There are a few MS programs I have ever used either but they are part of the system (Vista) program. Is it possible to remove them? This could free up a lot of spave on my c: drive.
Hey billch42
Make sure your partition d: is not your recovery disk
If there are between 9-19gbs, which is normally a recovery partition and should not be touched, except to make recovery disks
3rd party programs must be uninstalled and then reinstalled to the other partition
When programs are installed they are not just placed in the folder programs
they are distributed throughout the system operating in the accessibility of the registry by other programs, etc.
You cannot remove the programs that came as part of the vista operating system
but you can disable some of them
http://www.Vistax64.com/tutorials/67732-Windows-features.html
but you can move your files and data
http://www.vista4beginners.com/move-user-files-folders-to-another-partition?page=2
and the restoration of the system takes up to 15% of your hard disk space
You can change that to a smaller amount
http://www.Vistax64.com/tutorials/76227-system-restore-disk-space.html
http://www.vista4beginners.com/system-restore-space-used
and use panoramas disk cleanup
http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup
If the d: drive is NOT the recovery partition, you can save the data on it then delete it and expand drive c: in the allocated d: today occupied by you giving a disc more
Here's how to do it
http://www.Vistax64.com/tutorials/95418-disk-management-delete-extend.html
Walter, the time zone traveller
-
Error message: Windows Movie Maker program crashes when scanning film auto
When I try to create an automatic video, film imports, but to the point at which the film is created, the program crashes, Windows looking for a solution, the program opens again and I get a message that a problem that caused Windows to stop working. Note: Windows does not crash; the movie maker does. Then the suggested solution is to download updates for Windows, but there is no update needed.
The entire message is:
Product
Windows Movie Maker
Problem
Stopped working
Date
25/09/2010 10:43
Status
Solution available
Signature of the problem
Additional information about the problem
Help!
Bucket ID: 2037677096
Problem event name: APPCRASH
Application name: MOVIEMK.exe
Application version: 6.0.6001.18494
Application timestamp: 4c1a43fb
Fault Module name: FlipDSVideoDecoder.ax
Fault Module Version: 1.0.0.0
Timestamp of Module error: 4c78442b
Exception code: c0000005
Exception offset: 00008f46
The system version: 6.0.6001.2.1.0.768.3
Locale ID: 1033
Additional information 1: fd00
More information 2: ea6f5fe8924aaa756324d57f87834160
Additional information 3: fd00
Additional information 4: ea6f5fe8924aaa756324d57f87834160
Well, I was very happy when the program doesn't stop after following your advice and unchecking above named filter. But then, after it scans the file (which is a progress!), he says he cannot continue because one or more of the files contains a codec that is not supported by AutoMovie. I don't even know what a codec IS. I know who was Kojak, and I know what is Kotex, but what the heck is a codec and how do I get one?
Thank you!
==================================
Maybe the following article offers some ideas:"What exactly is"Codec"and why would I ever need it?
http://netforbeginners.about.com/od/multimedia/f/codec.htmIt is difficult to know what codec, you may need to because it
is based on the format of your source files. And it is possible
You may have some compatibility issues with one or more
source files.Several formats are apparently compatible with
Movie Maker, but the most reliable choices are:Photos - bmp
Video - wmv or dv - avi
Music - wma, wav, wmvIt may be interesting to try to download and install a codec pack...
(FWIW... it's always a good idea to create a system)
Restore point before installing software or updates)* Proceed at your own risk *.
K - Lite Codec Pack (full)
http://www.filehippo.com/download_klite_codec_pack/ (the name of the file that you download is:)
"K Lite_Codec_Pack_640_Full.exe")Good luck...
Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.
-
Wilde by using movie maker it froze and now I'm not able to close the program or do something with it. How to force to close and reopen or how to do something on frozen?
Hi VibekeMedini,Try closing the movie maker from the Task Manager, I suggest you follow the steps below.
Reference:What is the Task Manager?
http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-Task-ManagerAfter you open the Task Manager, you can click on the process of movie maker and click on end process.Thank you, and in what concerns:
I. Suuresh Kumar - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
Email after update: cannot paste, add a photo
I installed the update to iOS, and can stick is no longer my email. Also, I can't insert picture. A long click on the email brings up - nothing. I have iPhone 6 s. already tried hard restart. I have deleted the email app and put it back, but dread t
-
Ranging from network WiFi problem
My current installation (works perfectly!) is: -Airport Extreme (connected to a MacMini Server OSX) v Airport Express (WiFi connection to the EPA as an extension of network) Various devices are connected, air-conditioned and equipped with DHCP (Mac c
-
Critical failure with 2011 Windows Live Update - update!
When I installed the update to the Windows Live in 2011, I was no longer able to open my products from the Suite Office Windows. If I do a system restore to remove this update, I can open and then by the products of office but my McAfee and Windows
-
All-in-one Officejet J6480: printer Officejet J6480 on Windows 10
I've owned a printer all-in-one Officejet J6480 for a few years. I bought a new Lenovo computer several months that came with a free to Windows Update when 10 is which would be published. I managed to load the J6480 software and everything worked v
-
Hello I meet a strange behavior of the virtual keyboard the virtual keyboard to submit key incorrectly becomes gray (disabled) when the inputMode of a TextField is TextFieldInputMode.Password, here's the qml: import bb.cascades 1.0 Page { TextField {