Move the files to iCloud and then computer transfer to another user?

Similar Questions

• Error: "file 9xmigrat.dll on (unknown) is needed type the path where the file is located, and then click ok" when you try to install Windows Media Player 9.

  original title: WMP9 re-setup

  Hello. I use XP SP3 with all post-SP3 updates critical. Windows Media Player 9 does not work. When I try to reinstall, I'm stuck: the 9xmigrat.dll of file on (unknown) you need to type the path where the file is located and then click ok. I like WMP9 and do not want to use a newer version of WMP. I was not able to find 9xmigrat.dll

  This happens when I try installing to wmp.inf.

  If I try to install the MPSetupXP.exe, it does not either.

  Any ideas? TIA

  Thank you, David. It seems that the problem was caused by incorporating the updates for WMP9 using nLite. I made another CD of installation excluding these updates. A clean install of XP SP3 and WMP9 is working. Thank you for your response.

• How can I keep the files in iCloud and not on my mac?

  HI - how to keep files in iCloud and not on my Mac? I just added a 'family videos' folder from an old Mac to iCloud and now it is display on my newer Mac. It takes all my hard disk storage. Any suggestions? Thank you!

  That's how it's supposed to work I'm afraid. To work around the problem, you can disable iCloud Drive on your Mac and access it from your web browser to iCloud.com

• How it prevents illustrator of the conversion of the shadows at the edges when the file is closed, and then reopened?

  I have no idea why this is happening but you must stop. I can't change the shadows in Illustrator files once they are reopened. I don't have time for that. Help, please.

  What is a file originating with an older version, as it is being edited in CC? Try record underand don't forget to save it as the current version.

• Wanted to access a user, and then from there to another user & acess al its tables

  Hi all
  
  First of all, I want to access the user "VIKR" in order to create views in the VIKR dev01 database schema.
  Then, I want to get READ access to all the tables in two more (VIKRD, VIKRE) schema.
  
  Can help please. How to grant read access to all tables of a schema to another.
  
  Your help will be appreciated.

  You can write a bit of PL/SQL

  DECLARE
    l_sql_stmt varchar2(1000);
  BEGIN
    FOR t IN (SELECT * FROM dba_tables WHERE owner IN ('VIKRD','VIKRE'))
    LOOP
      l_sql_stmt := 'GRANT SELECT ON ' || t.owner || '.' || t.table_name || ' TO vikr';
      dbms_output.put_line( l_sql_stmt );
      EXECUTE IMMEDIATE l_sql_stmt;
    END LOOP;
  END;
  

  Depending on why you want to do this, you can prefer this access to a role and this role of VIKR subsidies so that you can then use the same role for other users to access the same set of objects. And, of course, when new objects are created in the schema or in the future, you will need access to these objects VIKR (or role).

  Justin

• My laptop crashed. I have the disc (intact). How can I find and move the files to the Inbox (not local folders) of my three accounts to the new pop3 computer laptop?

  Old laptop had Thunderbird. The laptop no longer works, so I took the drive C (SATA drive) and and which plugged into a USB port.

  New laptop has installed Thunderbird local folders have been restored. The contents of the Inbox is missing (I use the option ' download server ", so the recent correspondence is here.)

  I have three POP3 accounts, so I will try to identify the location of three separate "inbox" and "Sent" folders and add them to the new facility.

  Where the files are stored, and what would be the easy way to get back them on the new laptop?

  It would be great if there is a more fluid way for disaster recovery.

  You could have copied the whole profile and do with it.
  To create backups, you should also back up the entire profile.

• How to move the FILE from one place to another and keep "Indexing" have to move to the unknown location so you can't discover its full file path? Windows instructions provide information wrong re: how to do this!

  Make a bunch of audio files, placed in a folder on my desktop. Files initially sent to RealPlayer to burn, but when finished burning CD and went to read a CD, folder got seized by Media Player, 'Indexed' and disappeared from the office. I'm a relatively new computer user, and I need to learn more about file paths, how to view the path FULL of a file on my computer and how to type (create) full path when I need to. The "Indexing" feature seems to erase this lesson for me, and after having spent four hours trying to find Vista instructions on "How to move the file from one place to another", I gave up! Windows 'Help and Support' on my computer gives wrong directions. It states that if I right click on a folder > properties, a dialog box opens with a tab by which I can move my account. There is no tab location here. I found locations tab when right click on the "Mobile" folder, but still no option to "move file". No idea what is the folder "Roaming" or why it's on my computer. I want my audio files in the My Music folder, but this place is "access denied." Don't know how to get the audio file it in any case, but if anyone has any advice, I would be very happy! Thank you. PS - I had no problem moving folders in XP. I don't like the idea that a computer is to decide where to put my files. I want to control where I put my files. I don't like the way search works under Vista. I liked the XP search companion better because, for a computer fool like me, it was really easy to organize and find files and folders and had an option specific to find audio and video file TYPES.

  Here is an article on how to move your personal folders in Vista: http://www.howtogeek.com/howto/windows-vista/moving-your-personal-data-folders-in-windows-vista-the-easy-way/.  If you're talking about the special folders (such as photos, Documents, office...), then here is an article on how to move: http://www.winhelponline.com/articles/95/1/How-to-move-the-special-folders-in-Windows-Vista.html.

  If you have trouble with the search after you move the files, then rebuild the index: http://www.tech-recipes.com/rx/2103/vista_rebuilding_the_search_index/.  Here is an article on how to use Indexing Options in Vista that may be useful for you: http://www.vistax64.com/tutorials/69581-indexing-options.html.

  If the above does not help, your problem seems to relate to the image of the files/folders and their interactions with Media Center (which operate on different other folders).  Please repost your question in images and video Forum at: http://social.answers.microsoft.com/Forums/en-US/vistapictures/threads where the people who specialize in issues of the image will be more than happy to help you with your quesitons.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I can not move the files to a folder in windows XP, only to copy them, and I get the windows error. This happens on any file or folder.

  I use XP Pro SP 3 and I'm having a problem with moving the files from one folder to another, no matter where the folder or files. If I try to move a file, it crashes and it cannot be opened or used. If I move a folder, then crashes all the contents of the folder, and I can't even open the folder, it tells me access is denied, this nothing else. If I try to delete the file, then I get a prompt to error telling me that the file or folder is not accessible, and that access is denied and "make sure that the disk is not full or write protected." If I try to move the files corrupt in another folder, this time I get the message "Unable to move or replace" the file in question and "make sure that the disk is not full or write protected." If it is a document as a text file, then I can open the file and there is a prompt indicating that access is denied. I can then use the text document and save something, but if I close the document and then try to reopen it, all the changes are lost.
  It is not this problem if I move the files to an external device or disk drive.
  I am running as an administrator.
  Right now, if I need to move a file, I copy it to its destination, which is possible and then delete the original file. With the help of a release program was the only way I could delete these files, which could no longer be used.

  Hello Closrapexa, welcome.

  1. do you have this problem started recently?

  I recommend trying the system restore to bring the system back to a State before the problem started. Try this:

  1. click on START

  2. click on "all programs".

  3. click on "Accessories".

  4. click on "system tools."

  5. click on "system restore."

  6 follow the prompts shown to restore your system to a date before the problem started. Although the system restore does not target the personal data, it is recommended that you back up all data such as music, photos and documents in case something is not bad.

  Let us know what happens

  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I opened my computer it always tells me that the file is damaged and unreadable. Please run the Chkdsk utility... I searched my computer for "chkdsk utility" and can't find that. Help, please!

  Can someone help me please, I don't know how to use a computer I was googlen 4 days! When I opened my computer it always tells me that the file is damaged and unreadable. Please run the Chkdsk utility... I searched my computer for "chkdsk utility" and can't find that. Help, please!

  From what you say, you are probably unable to start Windows.

  In this case, when you start the computer, keep tapping the key "F8" on the keyboard until the Advanced menu comes up. Then choose "Safe Mode".

  You will see something like your ordinary, here to enter office "chkdsk volume: /f" (replace with your hard drive volume, in most cases, it's 'c') at the command prompt.

  For reference:

  http://support.Microsoft.com/kb/315265

  Hope this helps

  Post back if necessary

  ____________________

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• move the files and copy them

  Ten Windows is annoying me in many ways and so did windows 8 but it is the most painful. I have a lot of files in a folder and you want to move some but not all somewhere else. So I start to select the ones I want to move holding the key ctrl while I select. Once I have selected perhaps 8 or 9 the system copies all of them there in the folder where they are already! Why it assumes that anyone would do such a silly thing and how can I make him wait to be told what to do?

  Post proposed by the facilitator for the appropriate forum placed

  You need a firmer hand.  Now the Ctrl key while you drag a file over 4 pixels will cause a "copy."  This was true on all versions of Windows forever, but if you have a new screen super-HD, 4 pixels is very small amount of space, so it can be very easy to accidentally only drag away when you simply by clicking to select.

  You can go to the 'View' menu at the top and select the option 'use cases' and use them instead of the Ctrl method.  And then selecting multiple files is easier and given that you use the Ctrl key you can not accidentally cause a copy.

  There is also a more advanced to go into the registry and set the threshold of 'slide' to be more than 4 pixels.  For example, you could do it 60 pixels and then you will need to drag the width of an icon (icon of average size is 64 pixels) before that this would trigger a copy.  The instructions for this are on line (since it has been the same for 30 years, you can simply use instructions, it works on any version).

• Photoshop CC (2015.5); Installation failure, unable to move the file. Rename the file and try again

  Right. So I downloaded and I logged into Adobe Creative cloud and I tried to download Photoshop CC (several times). But when it gets to 90%, I get the error in the title ("the Installation failed, cannot move the file. Rename the file, and then try again")

  I tried using error messages in the logs for troubleshooting, but I found nothing. Here are the 2 error messages I receive.

  'Key3List build failure'.

  and

  ""ACCC: could not find the LEIDs/LEID tags in the request data".

  I use Windows 10 x 64-bit PC

  If someone knows the problem, I found a solution and probable cause.

  I have Kaspersky Protection. Disable it while you download. This probably applies to more than a bag of protection.

  Thank you

• If I buy adobe Elements 10 or later what software should I make the DVD to mov files, the files are large and I know they must be compressed and I don't want to lose quality... I know that adobe pro you still need software, but will still work with el

  If I buy adobe Elements 10 or later what software should I make the DVD to mov files, the files are large and I know they must be compressed and I don't want to lose quality... I know that adobe pro you still need software, but will still work with the elements and may itself make the compression... I know it can burn DVDs...

  vidog

  If you burn to a DVD disc in first items 10 and later versions, some choices are

  a. DVD-VIDEO standard screen or 4:3 16:9 on DVD disc

  Both will have the frame size of 720 x 480 pixels. But the big screen comes with a 16:9 flag that extends approximately 856/480 16:9 display video after encoding. The screening is not adjustable by the user... and you end up with the DVD-VIDEO format @ 29.97 images per second interlaced.

  b. format of the AVCHD on DVD

  Here is the video display 1920 x 1080. And, depending on the version, can be 29.97 images interlaced per second, or 23.976 progressive frames per second (if not just 29.97 images per second interlaced). Although you can generate some AVCHD DVD with a regular DVD burner, DVD AVCHD is in need of a blu - ray player that supports supported AVCHD DVD or one of these drives multimedia multi which is also.

  c. If the player allows... you can export your Timeline file saved on a USB Flash drive and then insert this USB Flash drive in the drive to get the reading of the file. On this route, you can set the Premiere Elements avancΘs to customize your choice of export preset.

  Please consult the bulletin and consider then, let us know if we have targeted your question. If this isn't the case, please give more details in the areas where we do not have.

  Thank you.

  RTA

• Error when opening file reader pen "the driver or network connection that the shortcut 'Target.lnk' refers to is unavailable. Make sure the disk is properly inserted or the network is available, and then try again. »

  Original title: during opening of pen drive file to msg "the drive or network that all connection 'refers to mpr shortcut' folders.lnk all in unavailable.make that the disk is properly inserted or the network is available and then try again."

  OS:-xp sp2

  pen drive :-transcend

  earlier, my USB had worms, bt Finally I took it off my ESET internet security (fully updated).

  BT still records are transformed into shortcut of 1 kb. and makes me worried coz I m nt able to open these files... Please help me out of this problem... I need my data, its urgent.help me as soon as possible to change these documents in their original format.

  my folders have files .doc, some do' report.unfortunately not have a backup of these files.

  target location: Z3ojKiH9lvFefkO0mG6Hl1XplgLV3L0YJVfdZRr3dtLhEN80DnzEPQX8Y2sziakx2axTnS4SA0447SPkbMn4QN

  In the location target properties are even 4 all records

  Clinical target:-H:\Z3ojKiH9lvFefkO0mG6Hl1XplgLV3L0YJVfdZRr3dtLhEN80DnzEPQX8Y2sziakx2axTnS4SA0447SPkbMn4QN\73mrVQz9rDByh9hfKJ9v0lt5z3m0s5hP0l.exe real sheet.xls

  What exactly is...

  I ve deleted the worms... checked by ESET, CLAMWIN PORTABLE, lapi ny window 7 WINDOW DEFENDER friend.

  ESET that worms have been Win32/AutoRun.VB.UG.Worm.

  now, I ve you gave details d, should know the problem I ve.i believe.help me

  Thank you for your time, but I did nt get the solution everywhere so formatted, it

• The empty folders and data LOSS and important information. don't move the files not moving OVER all THE

  I am so angry! I too moved significant LOSS of information and records in the files of vista to w7 has not transferred on :(  I'll never be able to recover all the hours of work and information, I got in there.  I have zero confidence in the safety of my data... should I go back to the paper and pen and keep books the really important stuff?

  How do you transfer the files?

  Best way to transfer files and settings from an old computer to new computer would be to use windows easy transfer.

  http://Windows.Microsoft.com/en-us/Windows7/how-does-Windows-easy-transfer-make-setting-up-a-computer-easier

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-easy-transfer

  http://Windows.Microsoft.com/en-us/Windows7/transfer-files-and-settings-from-another-computer

• I use LR 6.5 on an iMAC. Files RAF Fuji originally, I imported from an SD card worked and exported in the form of PSD and then after saving the files on an external hard drive RAF erased from Lightroom. I now want to import some RAF b HD files

  I use LR 6.5 on an iMAC. Files RAF Fuji originally, I imported from an SD card worked and exported in the form of PSD and then after saving the files on an external hard drive RAF erased from Lightroom. I now have to import some RAF of the HD files but LR shows them as dazed out and said that they have already been imported when I hover over the thumbnail. I have this problem when importing files in the same HD Canon CR2, and who have been treated exactly the same. Anyone got a clue as to why this is happening? Thanks, Phil

  Hi Phil,

  If Lightroom then reads these as duplicate files, it shows that they are already present in your Lightroom Catalog.

  You can search by file name and check if the image is present in your library.

  Kind regards

  Claes