MSE 8510 clustering and maintenance of static meeting rooms

Similar Questions

• 8710 GST MSE and MSE 8510 blade clustering

  These can simple questions, but I can't seem to find clear answers to these questions. You can cluster telepresence MCU MSE 8510 blade with GST MSE 8710 blades? And if yes, what version of the software do I need to have each blade running? I'm looking to upgrade our MCU at GST and I want to just make sure I have all the info I need. Thank you.

  Hello Eddie,

  You can only cluster the same blades.  Example, MCU with other 8510 8510 s up to 3 blades and GST 8710 with other 8710 s up to 4 blades.  The exception to this rule is if you are migrating your MCU 8510 to GST blades by installing the MCU to the GST software on the 8510, see Running_TS_Software_on_MCU_MSE8510 on how to do this, so these blades MCU 8510 now becomes and should then be treated as GST 8710 blades.

  All blades that should be included in a cluster must be running the same version of the software.

• Image of MSE 8510/8710 blades and custom

  Hello

  We have a customer requirement to download the image to measure for the MSE 8510/8710 balde. Essentially when they call the standard AUTOMATIC or TMR, they won't see the Codian image (built in) and they need to see their own custom image with the custome made audio.

  I know that we can load the audio files on command. can we upload the image static (such as a company logo) as a bunch of customization?

  Note: The TANDBERG (MCU, ISDN GW) products had this option to download the custom image made.

  Thank you.

  Chris

  Hi Chris,

  We can only toggle the lobby screen. From now there is no provision to load a custom image.

  To turn on global basis

  1. go in configuration > system settings

  ' 2. check or uncheck the box ' display entry screen "checkbox

  To do this on a per Conference basis

  1. go to configuration of particluar conference

  2. Select the appropriate option in "View the lobby screen" menu drop-down.

  In addition, you can apply feature through the appropriate channels.

  Please have this question answers and write it down. If have more queries do not hesitate to ask.

  -Sagar

• Media Port Mode on a MSE 8510

  Hello

  I would like a confirmation, currently we have a blade in our MSE 8510 and the Media Port is set to HD.

  • This means that we have 20 HD video Ports available (up to 20 endpoints will be able to connect)
  • We have also 20 dedicated ports for streaming.
  • Finally, we have 20 additional voice Ports.

  The problem is that we have a meeting that it will take 26 video Ports, if I put it in the SD, we have about 40 SD video Ports. But no content or audio ports.

  Will be what this means if 26 end points to connect I have 14 left ports and ports audio and content will begin to use my video ports?

  I'd connect 26 people on my MSE 8510, with about 10 people connecting via audio and all end points will receive the content.

  Please see attached picture.

  Yes, if you share your content, will consume you a port video, same thing for one participant audio that connects to the Conference.

• Why replace MSE 8510 MCU 4.4 with Telepresence Server (3.1)

  We have a with MCU 4.4 MSE 8510. Looking at the software accessible to the general public, that looks like that I could replace the software with the telepresence instead server software.

  Why I do this? What can I win (and lose) by? I don't have any old CTS systems, just Jabber, MXP and C systems. Is telepresence server software that is actively developed while the old software MCU is not?

  Thank you

  I agree with you, Codian MCU is the best.   =)

  This is why I think Cisco is not going to add MCU multi-screen support, because if MCU multi-screen support, I don't know that all customers would not want to migrate to server TP or buy a new server TP.

  But because of these two main features of server TP, we think about its use, who are the multimonitor support and support for the optimization of the resources with the driver.

  Many Cisco! As always... In this way, they can keep the two products on the market, MCU and GST.

  Paulo Souza

  My answer was helpful? Please note the useful answers and do not forget to mark questions resolved as "responded."

• Custom privileges for the user, MSE 8510 blade

  Hello!

  Does anyone know if it is possible to create a user account on the MSE 8510 blade with 'custom' privileges more than the preconfigured settings?

  Example: You can create a user who can display one or more conferences (and only) and "limited control" for those conferences WITHOUT giving the user the ability to view/edit other conferences?

  Kind regards

  OLA

  HI, Ola,

  I'm afraid that this is not possible at the moment, and my suggestion here is to wear a request functionality, through the Key Account Manager - based on the effect of nbusiness this feature has on your business, we can consider this to be implemented.

  Currently there are 7 different level privileges, but none of the people not can be customized, as requested.

  The levels of prvivilegel are:

  1 Administrator

  2. conference creation and control

  3. creation and restricted control conference

  4. creation of the Conference

  5. details of conference

  6 conference list more streaming

  7 list Conference only

  Please let me know if you need more details about each individual privilege.

  Concerning

  Cristian

• MSE 8510 MCU Chair vs participants comments

  What is the difference between a Chair and feedback from participants, and which is considered to be someone to be a president and another guest?

  I have the following options set on our MCU and no matter how I compose in, even a non registered endpoint that is not on our VCS, I always give me the level of control for users of Chair set.

  MCU type: MSE 8510 v4.3

  In the menu call for Chair: 3 - advanced level

  In the menu request for comments: level 1 - Local

  Thanks, Patrick

  > What is the difference between a Chair and feedback from participants, and which is considered to be someone to be a president and another guest?

  A conference will not begin before the first President of the joints.

  Endpoint to participate as guests (participate in the Conference with guest ID) will see a silent screen black/along with the text of the display "waiting for the Chair of the Conference" and an audio prompt after five seconds, then every minute thereafter.

  Addition to above, you can control the behavior when the last president left the Conference (it's the only when invited remain setting).

  The two options are:

  -All participants are disconnected (default)

  -All participants can continue the Conference until the last of them disconnects (non-action)

• Difficulties of transmission C40 to MSE 8510 via H323

  Nice day

  I currently have intermittent problems between a codec C40 and my MCU. When the device is composed in the bridge it does not have audio or video, it passes however.

  There is no shortage of receive audio or video when composed through SIP (MCU) or dial directly from another endpoint via H323.

  The unit was stable until I upgraded to TC6.2.0. I upgraded C40s all across the country and no other issues brought to the point. The problem persisted after that I get the system back to 6.1.2.

  After the failure of the downgrade I upgraded to 6.2.0 and resetting the device. Once reset, I did a restore of the TMS system.

  The unit is problematic since the installation. I have known problems that the unit could not pick up thermometers grounded which caused the device past security mode and increase the speed of the fans. In order to solve the problem, I upgraded the software twice. Currently, the unit may not in standby mode.  I also found the camera freezes and needs a reboot to restore functionality.

  System details:

  C40: TC6.2.0.20b1616

  MSE 8510: 4.4 (3.42)

  VCS C/E: X7.2.2

  Just a few comments on that for those who are interested.

  This is a bug in x 6.2 and 6.1.1

  https://Tools.Cisco.com/bugsearch/bug/CSCui47228

  TC6.2 fail to send ack of the OLC to MCU intermittently

  CSCui47228

  Description

  Symptom:
  TC6.2 not send OLC ack to MCU intermittently.
  Conditions:
  call with the MCU, intermittently receive no video and audio of MCU
  Workaround solution:
  try to reconnect to the call once again

  Last modification:

  Ms 9,2013

  Status:

  Fixed

  Severity:

  Serious 2

  Product:

  Cisco Telepresence System Integrator C series

  Support requests:

  0

  Known affected releases:

  6.2.x

  6.1.1

  Known fixed releases:

  6.3

  6.2.1

• Table of clusters and the cluster is a bar counter, how can I change the color individually?

  Table of clusters and the cluster is a bar counter, how do I change the color of the bar individual meter for each element of the array?  I just realized that you cannot change the properties of an element of the array without changing everything.  For scale, I had to make digital for each graduation of the scale indicators so that each measure meter in the table in the cluster has individual scales.  I also had to do some calculations for each barmeter to display the correct proportions of 0 to 100% on the scale.  Now, I'm stumped on the color of the bar counter.  Basically, if the value exceeds a set value, the meter bar should turn red.  It must be in a table to be infinitely scalable.

  Thank you

  Matt

  And yet anothr approach...

  Right click on the bar of > Options to fill > maximum fill.

  

  The fill color of the same color as the background color, then make the background color transparent.

  Drop a box of color BEHIND the bar and the size correctly.

  He has this strange background 3D with flat bar, but what the Hey, his relatives. If its important a custom color box.

  Ben

• alert security Windows says I have no anti virus protection, but MSE is on and up to date.

  Original title: security alerts Windows sees no MSE

  alert security Windows says I have no anti virus protection, but MSE is on and up to date.  I get no error message and my updates are current.

  It was the Security Center, but I rebooted and the problem is no longer.  Thank you

• When to use a DSL filter? And what is static on regular telphones?

  When to use a DSL filter? And what is static on regular telphones?

  'Computer' and voice communications through a telephone line active DSL work on different frequencies. However, there is often a frequency in these ranges overlap, that means DSL performance can be degraded and phone calls can suffer with audible interference. A DSL filter simply uses an electronic filter to keep things separate. To answer your question of when to use a DSL filter then it whenever the hardware and ordinary phones are used on the same LAN enabled phone line.

  Static on phone lines would just be crackling or other similar non desired audible signal interference.

• Windows XP closed shut and restart do not meet demand. It has only happened since 01/01/2012. Why?

  Windows XP stop system will respond only to the hibernation or standby. Shut down and restart do not meet the demand. It has only happened since 01/01/2012. Why?

  Hey IanForbesUH,

  You said that you have received errors, please post what were these errors. This will help us figure where your system is having issues.
  have you tried restarting your computer in last known good Configuration? Make sure to save all your media because it restores your system to how it was on the selected dates.
  To do this: restart your computer. Immediately after the screen turns off for the first time, press the F8 key repeatedly. Selectlast known good Configuration and press ENTER. Windows XP attempts to start.

• During execution of the backup and maintenance on one of my computers, I noticed a folder and the file that I can't identify me...

  Original title: identity of unknown folder

  During execution of the backup and maintenance on one of my computers (Windows xp home, sp3), I noticed a folder and the file that I can't identify.  The name of the folder is cc68f6b7a7ca948eefb018f001 and the name of the update.exe file.  The properties of the file that it is a Windows Service Pack installation.  I tried Googling the name of the folder, but found nothing.

  Can you tell me with regard to this issue, and what, if anything, I have to do?

  Thank you.

  When some programs (including Windows) installs things, it can create a temporary folder composed of 20-30 random letters and numbers or random numbers and letters in the root of the drive of the volume with more free space.

  This explains why the records are sometimes on your C drive or any other drive - the most space?

  For example, you can see a similar to or called folder:

  D:\9470bb12e8a4f3447657236478e41c5

  There may be other folders and files in this main temporary folder such as amd64 and i386 platforms.

  They should normally be deleted when the installation is complete, but sometimes they are not - especially if the installation fails.  They are harmless but annoying.  You can think something is wrong when there are no or fear, that the files are really necessary.  To avoid confusion, you can delete the temporary files.

  If your installation has failed or the installation does not remove the folder to the random name when it finishes running again installation will be another folder at the random name.

  You may be able to identify installation (out of curiosity) by looking at some of the contents of the folder and decide if this installation was not serious, just remove the files/folders.  If the installation does not work for some reason, run again just installation will create a new temporary folder to the random name so the old temporary folder is really useless.

  Records are sometimes tough to remove.  Even if you are an administrator on the system, you might get a "sharing violation", "access denied", "used" or type similar message when you try to delete temporary folders.  Facilities sometimes use different permissions that can have a regular user with the administrator group.

  There are many methods to try to remove the folders, and some require third party programs to install or change some windows settings that could compromise the security of your system if you do not change them back when you're done.

  Start your system in Mode safe mode (by pressing the F8 key several times just before XP attempts to load) is one good method to try to remove the files because it does not have to make any changes to your system configuration or by downloading third-party programs.

  If you are running XP Home Edition, the following section on turn off "Simple file sharing" does not apply to you since in XP Home, Simple file sharing is always turned on.  If you are running XP Home Edition, skip the next few paragraphs and resume where it says:

  "If no part tool above work try a third popular called Unlocker.

  If Safe Mode does not work you can change the security of the folder when you start in Normal Mode to give your username full control over the files by navigating to it in Solution Explorer, click on tools, Folder Options, view and in the advanced settings window, uncheck (at the bottom of the list) use simple file sharing (recommended) and click OK.  This disables him recommended simple file sharing on your computer if you want to turn it back on when you're done to make everything you do.

  Right-click on the files of interest, click Properties and click the now visible security tab.  Change the properties, but you need (for example, select your user name, and check the box to allow full control), click OK to apply the changes.

  With usage share of active simple files (recommended) the checked the properties of the folder tabs are:

  General, sharing, customize

  With the use of sharing files simple disabled (recommended) box unchecked, the properties of the folder tabs are:

  General, security, customize

  Now, try to manipulate/delete the folder.

  It's a good idea to go back to the Explorer and the cheque in the box easy to use sharing files (recommended) when you have finished making everything you do.

  If none of the above works, try a popular third-party tool called Unlocker.

  Unlocker can be downloaded here:

  http://www.emptyloop.com/Unlocker/

  If you use Unlocker, be sure to install because he wants to add a bunch of options, addons, shortcuts and other extras that you don't need.

  You must add the shell extension so when you right click on the offending file, you will have a Unlocker option to choose.  I would just install it long enough to clean up the leftovers and then, I usually just uninstall and all parts of it.  You can always install it again another day if you like.

  Unlocker can be uninstalled when you have finished using it.

  Reboot when finished to ensure that boring records are really missing.

• I lost cell/Solitaire free, etc, so I need to restore the files but can not find system and Maintenance of the Panel

  I got an e-mail allegedly Windows this morning - when I tried to open it nothing happened. Now the games that I had in the starting box disappeared.

  I want to try to restore files in the backup and Restore Center. The brochure that I said to go to the control panel and find system and Maintenance, but I can't.

  Hello

  Take a look at the thread below for a possible solution:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/restore-machine-to-its-factory-XP-Pro-condition/e73c252f-0242-E011-9577-d485645a8348

• Windows Vista everything becomes black and has a static cursor in the upper left

  Original title: I can't get my vista pc to boot at all.

  I think I have a virus in my laptop, it is a toshiba satelite machine. All we can get it to do is see the toshiba start screen, listing the f2 and f12 options then just, the screen becomes black and has a static cursor in the upper left, it doesn't do anything else. I tried repeatedly tapping f8 to no effect can someone help me please?

  Hi Andy,.

  Remember to make changes before this problem?

  Method 1: If your keyboard is equipped with F-lock (function button), switch, then check if you can access the advanced boot options to access Safe Mode or last good known Configuration.  See the link below

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Method 2: Follow the steps mentioned in the link below to access the system recovery tools and then try to run the Startup Repair tool and then system restore
  
  How to access the System Recovery Options menu?

  Run the tool to restart system as shown in the link below
  How to use Startup Repair?

  Method 3: You can also view the article below, which deals with a similar question

  When you start a Windows Vista-based computer, the system may stop responding (hang) at a black screen

  http://support.Microsoft.com/kb/946532

  Important: In a clean installation, existing data will be deleted. These data include settings and personal data. After installing the operating system, you must also reinstall all programs.