MSE 8510 MCU Chair vs participants comments

Similar Questions

• Why replace MSE 8510 MCU 4.4 with Telepresence Server (3.1)

  We have a with MCU 4.4 MSE 8510. Looking at the software accessible to the general public, that looks like that I could replace the software with the telepresence instead server software.

  Why I do this? What can I win (and lose) by? I don't have any old CTS systems, just Jabber, MXP and C systems. Is telepresence server software that is actively developed while the old software MCU is not?

  Thank you

  I agree with you, Codian MCU is the best.   =)

  This is why I think Cisco is not going to add MCU multi-screen support, because if MCU multi-screen support, I don't know that all customers would not want to migrate to server TP or buy a new server TP.

  But because of these two main features of server TP, we think about its use, who are the multimonitor support and support for the optimization of the resources with the driver.

  Many Cisco! As always... In this way, they can keep the two products on the market, MCU and GST.

  Paulo Souza

  My answer was helpful? Please note the useful answers and do not forget to mark questions resolved as "responded."

• Cisco MSE 8510 MCU - comments PIN does not work

  Hello

  We have a few conferences on 8510 blade. Each conference is the main AXIS and the comments set up PIN. When I dial in the Conference, main SPINDLE works fine but the PIN prompt does not work.

  I tried to deal with the PIN of an endpoint, then the guest PIN from the other end, but the Conference does not accept the feedback PIN. I can use the good main SPINDLE on the two end points.

  Anyone know what may be the issue?

  I just tested this without 8510, no problem at all.

  Can you give us a screenshot of the configuration of your conference?

  I had used the same digital ID for Chair and comments, with a different PIN for each.  When I connected as Chairman, I went straight in.  When I connected as a guest, I went straight in, but I got a quick saying saying President to arrive or to connect.

• Difficulties of transmission C40 to MSE 8510 via H323

  Nice day

  I currently have intermittent problems between a codec C40 and my MCU. When the device is composed in the bridge it does not have audio or video, it passes however.

  There is no shortage of receive audio or video when composed through SIP (MCU) or dial directly from another endpoint via H323.

  The unit was stable until I upgraded to TC6.2.0. I upgraded C40s all across the country and no other issues brought to the point. The problem persisted after that I get the system back to 6.1.2.

  After the failure of the downgrade I upgraded to 6.2.0 and resetting the device. Once reset, I did a restore of the TMS system.

  The unit is problematic since the installation. I have known problems that the unit could not pick up thermometers grounded which caused the device past security mode and increase the speed of the fans. In order to solve the problem, I upgraded the software twice. Currently, the unit may not in standby mode.  I also found the camera freezes and needs a reboot to restore functionality.

  System details:

  C40: TC6.2.0.20b1616

  MSE 8510: 4.4 (3.42)

  VCS C/E: X7.2.2

  Just a few comments on that for those who are interested.

  This is a bug in x 6.2 and 6.1.1

  https://Tools.Cisco.com/bugsearch/bug/CSCui47228

  TC6.2 fail to send ack of the OLC to MCU intermittently

  CSCui47228

  Description

  Symptom:
  TC6.2 not send OLC ack to MCU intermittently.
  Conditions:
  call with the MCU, intermittently receive no video and audio of MCU
  Workaround solution:
  try to reconnect to the call once again

  Last modification:

  Ms 9,2013

  Status:

  Fixed

  Severity:

  Serious 2

  Product:

  Cisco Telepresence System Integrator C series

  Support requests:

  0

  Known affected releases:

  6.2.x

  6.1.1

  Known fixed releases:

  6.3

  6.2.1

• Media Port Mode on a MSE 8510

  Hello

  I would like a confirmation, currently we have a blade in our MSE 8510 and the Media Port is set to HD.

  • This means that we have 20 HD video Ports available (up to 20 endpoints will be able to connect)
  • We have also 20 dedicated ports for streaming.
  • Finally, we have 20 additional voice Ports.

  The problem is that we have a meeting that it will take 26 video Ports, if I put it in the SD, we have about 40 SD video Ports. But no content or audio ports.

  Will be what this means if 26 end points to connect I have 14 left ports and ports audio and content will begin to use my video ports?

  I'd connect 26 people on my MSE 8510, with about 10 people connecting via audio and all end points will receive the content.

  Please see attached picture.

  Yes, if you share your content, will consume you a port video, same thing for one participant audio that connects to the Conference.

• Image of MSE 8510/8710 blades and custom

  Hello

  We have a customer requirement to download the image to measure for the MSE 8510/8710 balde. Essentially when they call the standard AUTOMATIC or TMR, they won't see the Codian image (built in) and they need to see their own custom image with the custome made audio.

  I know that we can load the audio files on command. can we upload the image static (such as a company logo) as a bunch of customization?

  Note: The TANDBERG (MCU, ISDN GW) products had this option to download the custom image made.

  Thank you.

  Chris

  Hi Chris,

  We can only toggle the lobby screen. From now there is no provision to load a custom image.

  To turn on global basis

  1. go in configuration > system settings

  ' 2. check or uncheck the box ' display entry screen "checkbox

  To do this on a per Conference basis

  1. go to configuration of particluar conference

  2. Select the appropriate option in "View the lobby screen" menu drop-down.

  In addition, you can apply feature through the appropriate channels.

  Please have this question answers and write it down. If have more queries do not hesitate to ask.

  -Sagar

• 8710 GST MSE and MSE 8510 blade clustering

  These can simple questions, but I can't seem to find clear answers to these questions. You can cluster telepresence MCU MSE 8510 blade with GST MSE 8710 blades? And if yes, what version of the software do I need to have each blade running? I'm looking to upgrade our MCU at GST and I want to just make sure I have all the info I need. Thank you.

  Hello Eddie,

  You can only cluster the same blades.  Example, MCU with other 8510 8510 s up to 3 blades and GST 8710 with other 8710 s up to 4 blades.  The exception to this rule is if you are migrating your MCU 8510 to GST blades by installing the MCU to the GST software on the 8510, see Running_TS_Software_on_MCU_MSE8510 on how to do this, so these blades MCU 8510 now becomes and should then be treated as GST 8710 blades.

  All blades that should be included in a cluster must be running the same version of the software.

• Custom privileges for the user, MSE 8510 blade

  Hello!

  Does anyone know if it is possible to create a user account on the MSE 8510 blade with 'custom' privileges more than the preconfigured settings?

  Example: You can create a user who can display one or more conferences (and only) and "limited control" for those conferences WITHOUT giving the user the ability to view/edit other conferences?

  Kind regards

  OLA

  HI, Ola,

  I'm afraid that this is not possible at the moment, and my suggestion here is to wear a request functionality, through the Key Account Manager - based on the effect of nbusiness this feature has on your business, we can consider this to be implemented.

  Currently there are 7 different level privileges, but none of the people not can be customized, as requested.

  The levels of prvivilegel are:

  1 Administrator

  2. conference creation and control

  3. creation and restricted control conference

  4. creation of the Conference

  5. details of conference

  6 conference list more streaming

  7 list Conference only

  Please let me know if you need more details about each individual privilege.

  Concerning

  Cristian

• MSE 8510 TelePresence Server Migration - Issue of license

  I am following the process of conversion to a MCU 8510 into a server TS 8710.

  I ordered and received the migration SKU 0-dollar and have the code PAK

  Part number of top-level

  L-8000-CHLIC-PAK MSE 8000 chassis Licenses PAK PIDs

  Option part number
  L-8000-TSMO telepresence screen Option Migration, order L-8000-CHLIC-PAK

  Key question: will be recorded against this pak:

  1. The SN # MSE 8050 supervisor blade
  2. The SN # MSE chassis
  3. The SN # 8510 blade to be converted.

  There are good docs on the conversion process of loading software and the process.

  But nothing that I could find references exactly what SN # to use when registering the PAK for this process.

  The option TSMO key will apply to the MSE 8000 chassis.

  You are right, that the document is not clear where to apply, but it is also mentioned (very badly) on pg 12, in the section reference to the function keys.

• MSE 8510 clustering and maintenance of static meeting rooms

  I have 2 8510 blades with static meeting on each 100 rooms.

  These rooms have e164 numbers that I delivered to users for their meeting rooms.

  We are short of capacity, and we'll be adding another 8510 blade.

  I would like to group all 8510 3 blades.

  However, I don't want to have to manually recreate the 200 meeting rooms.

  My plan would be to make 1 blades with 100 primary rooms, leaving 100 rooms that I'm going to lose.

  I'll do a transformation on the VCS - C to replace the prefix of the blade from the slave to the prefix of the key blade.

  I will then try to 100 permanent rooms via putty with the script API...

  Someone at - it never do or have a preview?

  Here's what I'd do:

  1. Make a backup of both 8510 blades via the settings > upgrade > backups
  2. The two blades of the cluster
  3. Backup the configuration of the blades newly clustered
  4. Open all the backup files in an XML editor
  5. Determine the portion of text in old files that specify all your meeting rooms
  6. Paste the text room sitting in the cluster backup and save it
  7. Restore the backup of the cluster updated the

  I did something similar with 8710 blades, back in the day where you had to manually had to define every endpoint CTS. I got points of termination 50 + I had to add to three groups, so I used the method above, except that I stuck the CTS endpoint text, and not the meeting room information.

  Just be very careful to make sure that you paste text right in the right place.

• MSE 8510: default SSL certificate expired

  Hello community,

  the SSL certificate self-signed of our MSE8510 that has been Setup automatically during installation has expired. Is there a way to create a new directly on the box or do I need to do external and transfer?

  Someone has a short guide on how to do it?

  Thank you

  Renz

  Check:

  http://www.Cisco.com/en/us/docs/Telepresence/infrastructure/articles/mcu_certify_https_connections_157.shtml

  Its always a good idea to browse the first cisco documentation site! :-)

  You will find also some information when you use google, such as:

  http://blog.codesalot.com/2010/11/25/creating-certificates-fo-Codian-MCU/

  Please remember useful frequency responses (using the stars below) and mark answers useful or correct .

• Conference MCU SIP with VCS registration question

  Hi all

  We have a cluster of MSE 8510 MCU (software version 4.5 (1.72), Build 6.19 (1.72)) with 86 active confeneces. All of them are configured in the same way, to use H.323 and SIP registrar calls control.

  The thing is, I can see all conferences recorded under H323 and some of them just registered as SIP on the VCS cluster (X.8.2.2).

  What is the problem? Why can't all register using SIP?

  See you soon,.

  Petar

  Can you check to see how many conferences are recorded using SIP?

  If it's 50, this seems to be the maximum that can be recorded, see enhancement request CSCum48651.

• 5320 MCU software update 3.1 TS

  We currently have 5320 MCU running version 4.5 (1.45). I see that Cisco offers code TelePresence MCU server:

  http://www.Cisco.com/c/en/us/support/conferencing/Telepresence-MCU-5320/model.html#releasenotes ~ rdtab1

  Looking at the release notes is not very clear if when running 3.1 GST in MCU we will lose the ability to "Téléprésence MCU" in CUCM to use this 5320 MCU for Ad - hoc conferences.

  I know that GST 3.1 does not offer this possibility, but if you look at the file name for the MCU is cisco_ts_3.1_1.98_for_mcu_5300.zip (32,04 MB) vs GST 3.1 cisco_ts8700_3.1_1.98.zip (26,24 MB)

  Thank you

  If you upgrade your 5320 MCU with the telepresence server migration software, it will transform the MCU in a server of telepresence for all functions and features will be a telepresence server and not a MCU.  See the Software of TS running on MCU 5300 Series installation guide on how to convert your MCU to a telepresence server, if you are interested.

  Here are two good discussions comparing platforms MCU and telepresence server, one of them specifically on migration from one to the other.

  What-difference-between-MCU-Cisco-Telepresence-Server

  Why-Replace-MSE-8510-MCU-44-Telepresence-Server-31

  The cisco_ts_3.1_1.98_for_mcu_5300 software is for a series of 5300 MCU migrating to a server of telepresence.  The cisco_ts8700_3.1_1.98 software is specifically for the hardware already running a TP server software, such as the various servers of telepresence models listed here, this includes MCUs migrated to the server TP as the 5300 MCU to MCU MSE 8510 series software.

• Need to monitor the media port use on 8510

  Info on MCU:

  Cisco TelePresence MCU MSE 8510

  Serial number SM021XXX

  Software version 4.4 (3.49)

  Build 6.18 (3.49)

  Availability 6 days, 22 hours, 15 minutes

  It is a HD blade that is configured for the ports of 40 media

  I have to be able to look at the use of the port over time to know when we have exceeded the maximum number of ports and the appellant has been abandoned to the audio only

  Thoughts?

  --

  Dan

  You can find exactly what you are looking for in the event logs.  I just maxed out our 8510 by a participant, the same fall first one I added in the test that matched my allocation of port instead of going 1-sending video of my test results are below.

  30330	17:40:09.423	CONFERENCE	Info	Unable to send the video to "Patrick Sparkman" - allocation exceeded
  30331	17:40:09.536	CONFERENCE	Info	now able to send the video extended to "Patrick Sparkman"

• All series on stacking MCU 5300

  Hello world

  As my topic above.

  I have several questions on stacking MCU 5300 series

  1. what type of series 5300 MCU only stackable? 5310 + 5310? or + 5310 5320? or + -5320 5320?

  2. If I cumulation 5320 + 5320 MCU, can I do conference call with 40 participants from HD in a room?

  3. How about the layout?

  4. What are the different between stacking and cascade MCU?

  Please advise,

  Thank you

  Ovindo Prastyo Utomo

  Hello Ovindo-

  For questions 1 and 2, you can take a look at this powerpoint which shows different stacking combinations for the 5300 series MCU and port capacity for each.

  Regarding the page layouts, the 5300 series follow the same layouts class microcontrollers such as the 4000 series and MSE 8510.  In the MCU 5300 Administrator's guide, it covers some of these layouts.

  The packing is just another word as reunification when compared with other microcontrollers, it allows you to join two or more microcontrollers (two can only be stacked/grouped in the 5300 MCU series).  Once on the other two microcontrollers are treated as a big MCU.

  Cascade, creates a link involved between two microcontrollers.  A MCU dials to the other as a participant and is treated as such in order to allow a larger participants to attend a conference of MCU another if one is at capacity.

  Hope this helps some.