Much faster WRT54GL (5.4mpbs down) wired then on wireless (1.2mbps down)

Similar Questions

• I have more than 5000 messages in my windows mail inbox. Is there a faster way to remove several emails then hold down the ctrl key and click on individually on each e-mail?

  removal of several emails

  I have more than 5000 messages in my windows mail inbox.  Y at - it a faster way to delete several emails then hold the ctrl key and click on individually on each e-mail

  Yes.  Click on the email at the top of the page and highlight the bottom and shift, click.  Then delete the whole thing.

• Why disable SuperFetch on ssd, if the RAM is much faster than the ssd?

  Directed by Microsoft that SuperFetch and PreFetch must be disabled, if the OS is installed on an ssd, in accordance with article http://support.microsoft.com/kb/2727880. But SuperFetch is used for loading the data components of applications, which were very often used for RAM. Although the ssd is faster that a hard drive is not faster than the RAM. So, I do not understand why Microsoft suggest disabling this feature. The only reason why I want to understand, it's because of a limited RAM. If the RAM is sufficient beyond 6 GB, if we disable SuperFetch, then the boot time and increase the loading time of most used applications. I miss something here?

  The other question is about PreFetch. I feel, maybe wrong, it does the same thing with SuperFetch, with one major difference. It loads all the information data on the ssd or hard drive, instead of the RAM, in order to accelerate the launch of applications and time when the OS is installed on a hard drive to boot. If I'm right, let's disable the PreFetch it stores information for one ssd or hdd, while SuperFetch stores data of RAM information, which is much faster and so it must be enabled if there is a sufficient RAM.

  I look forward to reading the notice of a Microsoft software engineer.

  Hi Leventis,

  Prefetch copies frequently accessed files together into a contiguous on the disk area so that they can be located and loaded more quickly. That it takes a lot of old drives to recover data faster.

  SuperFetch predict what applications you run next and preload all the necessary data in the memory. She has also done that with startup files. And for all the three days he sends a defragmentation command to the OS drive that will cause problems in the SSD drives.

  In traditional hard drives (HDD) data are scattered throughout the disk, so that the operating system for access, it will take more time. It is suggested to perform a disk defragmentation. But storage technology is different in SSD, where, it records the data dynamically and it recovers more quickly. Who will be low down the burden on the RAM and the RAM can be used for uses such as for the opening of the games graphics high-end, etc..

  Hope this information is useful.

• Why is the Nightly build of so much faster and has better quality than the final product of Firefox features?

  The Nightly build is so much faster than Firefox, and the download feature is much better than the download feature in Firefox.

  The arrow next to the home button will appear in the version of Firefox in Firefox 20. All the features that are in every night thereafter will appear in liberation, when they are ready.

• HOW MUCH FASTER?

  Closer (if possible) percentages, please advise or just give me a rough idea: HOW MUCH FASTER IS WIFI at a SPEED of 18 Mbit/s and the QUALITY of the SIGNAL VERY GOOD (four out of five bars) compared to 18 MB/s SPEED and QUALITY of the EXCELLENT SIGNAL (5 bars).  I noticed fluctuations in continuous - even up to as high 54 Mbps and as low as 11 Mbps, but the signal is mainly around VERY GOOD to EXCELLENT in quality (i.e., four or five green bars) Notwithstanding the comings and goings, I use the WIFI N Protocol adapter (library, cafes hotspot, etc.).  Yes, sometimes, I moved to another part of the library, coffee, etc., but if not I can try improve the quality of signal and speed? The laptop is enough recent manufacturing (2009 or 2010), with 3G of RAM and 300 G hard drive and Windows VISTA.

  Thank you very much.
  Joe

  Hello

  It is likely to be only differences of minimum speed in these scenarios, if she would have certainly depends on
  the WiFi network that you accessed. Even if the WiFi signal you receive hard there may be a slow
  hose connecting WiFi to internet and/or a large number of computers sharing access.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Responsiveness of Windows XP is much faster than Windows 7

  According to this video

  http://www.YouTube.com/watch?v=Ay-gqx18UTM

  and MY personal experience, the xp desktop responsiveness is so much faster and less glitchy than windows 7 (e.g. open services.msc and play with the window, you will see black borders).

  You guys are going to solve this problem on Windows 8, to finally defeat xp in all aspects?

  Original title: why Microsoft, why?

  I have the same specification as Palcouk outside the video. Mine is a HD4250 integrated ATI and I get the black border.

  It may be safe to pin this one on the video card and drivers reasonbly

  Yes and also view the video uses Win 7, RTM, as in no current.

  I use two operating systems on Dells reasonably comparable...  I would say that in my experience 7 is faster than XP and not at all what I would call "glitch."

• Fonts: Selfhosting or Google much faster than Typekit/Edge?

  It is much faster font free host or use Google instead of Typkit fonts?

  I did a test by myself: my website http://DAS-werbeatelier.de now (since yesterday) use "Lato" Edge-Webfont.

  I m sure, this isn't the right way to test, but I took 'Google Page speed Insight' with a result of 47 (mobile) (bad) and 58 (desktop).

  Before yesterday the same website also used Lato - but as police auto-hébergées on my server.

  The result of speed Page was: 51 (mobile) and 64 (desktop).

  That's a significant difference - and it seems to be known.

  https://www.keycdn.com/blog/Web-font-performance/

  If this can be true? This means that, if you want a really fast site (-muse), Don t use Typekit oder Edge-Fonts?

  On the other hand, it is very convenient to use Typekit/Edge with Adobe Muse...

  I understand. 2 seconds "before opening" kill really!

  Have you tried to pass on the new option I mentioned above?

• Printer configured for wired computers and wireless

  Hello! Hope you can help me. We have a Photosmart C7280 printer all in one, which is currently connected wireless to a Cisco DCP3825 router that supports the wired computers and wireless. We have many laptops, wireless connection to the router, and anyone can print. I want to add in my HP desktop computer, which is not wireless. I plugged into the router via a cable and loaded the software of the printer, but the installation wizard could not find the printer to complete the entire upward. I unloaded all printer software until I tried it. In addition, I didn't know if I should choose a configuration of wired network or a wireless network configuration, so I tried both and neither one worked. I tried to look in the manual, but it was not useful. What is the best way to configure my network home, so we can print everything? Thanks in advance!

  Your router will not worry how the devices are connected.  Download and install the latest version of the software for your printer from the "Support & drivers" link at the top of this page.  When it installs it will see your printer on the network and install the appropriate software.

• cannot print wireless to wireless using a but access point wired printing (pc) wireless technology is very well

  I have a HP OfficeJet 8600plus N911a CM749A # product who has problems in this impossible to print wireless to wireless using an access point but Wired print (pc) wireless technology is fine. We have 4 pcs in a network cable that work very well try to print to the printer which is connected wireless. They installed the software and discovered the printer very well. When you try to install the printer on a Win8 Tablet and a laptop Win7 that neither would discover the printer, so I have two devices connected by ethernet cable and ran the facilities in the same way as the PC and installed everything and worked fine. But, after I disconnected the wire and reconnected or the other device wireless again (they go OK so I know that they get an address) when I go to print to the 8600 it says there is no communication to the printer. BTW, I can install (and installed) other (cable) HP printers on the network as the computer laptop and Tablet AUTODECOUVERTS and print... Yes, ideas on why it loses its Wireless communication to the wireless printer. He turns a few odd Protocol or discovered that did not pass on a wireless system?

  Thank you for answering my question and I wanted to know was the brand of the router.  I suggest making sure the router firmware is up to date as well.

  Here is a link to a post I did on the various ports used by HP printers for reference.

  -Incoming and outgoing Ports-

  So all your work computers don't encounter this issue?  Once again, while in the router, verify that wireless isolation is not activated.  A question also, I do not see has anti-anti-virus/firewall you had on your main computer that you are using?  Maybe it's not the cause, but that depends on the software, too.

  -Security and Firewall.

  You have all the exclamation points in your device manager?

  Let me know what is happening when you try another access point.

• MDX tale 2 - one is much faster

  A wonderful expert Essbase (albums firm whose name starts with I?) recommended that I use this formula MDX member Bill & forecasts in the Scenario dimension:

  Case When([Actuals],[expense]) missing <>then

  [Real]

  On the other

  [ForecastScenario]

  END

  It took over 30 minutes to run, so I killed my report script.

  I have changed its MDX, which took 2 minutes:

  IIF)

  [Actuals, [expense]) missing <>]

  [Real]

  [ForecastScenario]

  )

  However, I do not know why.

  Does anyone have an idea?

  Merry Christmas and happy holidays!

  ASO queries using MDX is broken down into one or more stored queries (for example if your MDX adds two different results, it can be run as two stored queries). Apparently, Essbase called these "core applications.

  When I see variable performance for functionally identical queries the number of "core applications' produced by each of these approaches is one of the things I check.

  To do this, turn on the tracking query:

  change the database application. DB enable query_tracking;

  Run your first query (only). Then run...

  query the database application. DB get cube_size_info;

  .. .and look at statistics 'follow-up of kernel queries' in the output. Run your second query then re-issue the query database statement. Look how much 'followed the kernel queries' has increased.

  This way you can tell if one of the approaches are being broken down in addition to the nucleus than the other queries. Still doesn't explain the difference, but sometimes.

  Disable query followed later with:

  change the database application. DB disable query_tracking;

• Is it possible to restore the previous features of the search box (press F4, first letter, go)? It is so much faster.

  The way the search box has been changed in the new version really slows change search engines. Is there any setting in order to restore the old feature? Be able to press F4 and then press the first letter of the engine that you want done things seriously fast. It was one of the main reasons I stuck with firefox. The same functionality can still be maintained with the new design. Even if I memorized the number of tabs between the search engines in the new system, it would be even heavier.

  Hello, I have suffered from a similar problem with the new search bar type. I found that you can go in about: config, then find the Boolean browser.search.showOneOffButtons and which switches. This should restore the old function. (You may have to restart your browser)

  Note that, as always, change your Subject: config at your own risk.

  credit: askvg.com

• Why is-C code so much faster? (Image processing)

  Hello!

  I'm working on a larger application but I reduced to show you a problem I encounter at the beginning. I join all the files needed to run.

  It is simple rgb2monochrome that I implemented in C code algorithm and code LabVIEW. I have not now why the C code is 4 times faster.

  In the code C transfer tables with pointers so I'm working on a given memory area. I thought that LabVIEW can be slower, because it creates unnecessary copies of berries. I tried to solve this problem with Structure elements instead and value reference data but no effect.

  I also tried to change the tunnels in the shift registers in some places (read in optimizing LabVIEW Embedded Applications). I changed options in the execution of the subVIs properties and I created EXE application to see if it will be faster. Unfortunately I can not yet reduce the difference time of execution.

  I know that my algorithm can be better optimized, but this isn't the main problem. Now the two algorithm are implemented in the same way (you can check in cpp file) when it should have a similar execution times. I think I made a mistake in the LabVIEW code, maybe something with memory management?

  And I know more... Maybe nothing wrong with LabVIEW code but something too good in C code ? It is 64 b library, implementation of usual way without forcing the parallelism. Moreover I brand performance in the thread of UI in COLD LAKE. But perhaps nevertheless CPU manages this function with multi hearts? I have 4 cores then the difference in execution time would be good . But it's impossible, right?

  I know that the notice that LabVIEW is sometimes slow, but approximately 15%, not 4 times. So I had to make a mistake... Anyone know what kind of ?

  Kind regards
  ksiadz13

  Well, here are a few things that make faster LabVIEW code, there are other improvements that could be made, but I would need to do several tests to see if they are better based on your input data.  First of all, I would like to enforce the VI Inline, not subroutine.  Also, I'd work with arrays of data instead of scalar values.  Also, you know the number of rows and columns because it is the size of the array, why keep this information?  Oh and if you are working with curls you can try parallel for loops to work on more than one processor at a time.

  And also, I'm not sure that all this work is in any way necessary.  If you have a double and turn it into a U8, it will be 255 If the value was greater than that to start with.  Attached is an updated release with several possible options to try.

  

  Oh and another improvement, why are you even unbundling the data in Unbundle_imageCPU1.vi?  Why not work with this table 2D-Red Green Blue?  I realize that even VI is called in LabVIEW code options both C but with LabVIEW just deal with other data could make faster together.  In particular, in view of the fact that regroup you after you're done anyway.

• Since the update for Firefox 4, I am no longer offers the possibility to save the tabs when closing making it much faster to access these sites when starting the next day. Why this possibility has been removed? It's a favorite feature.

  Since the update for Firefox 4, I offer more the ability to save tabs on shutdown - makes more rapid access to these sites when commissioning the next day. Why this possibility has been removed? It was a feature favorite and saved a lot of time.

  Firefox 4 records the previous session.
  
  You can use "Firefox > history > restore previous Session" for the previous session.
  
  There is also a button 'Restore previous Session' on the default on: Home home page.

  Another possibility is to use:

  • Tools > Options > general > startup: "When Firefox starts": "show my windows and tabs from last time '.

  You can set the preferences of warning on the topic: config page true via the context menu or toggle the value with a double click of the left.

  • browser.showQuitWarning, see http://blog.zpao.com/post/3174360617/about-that-quit-dialog
  • browser.tabs.warnOnClose, see http://kb.mozillazine.org/About%3Aconfig_entries
  • browser.warnOnQuit, see http://kb.mozillazine.org/browser.warnOnQuit
  • browser.warnOnRestart, see http://kb.mozillazine.org/browser.warnOnRestart

  To open the topic: config page, type Subject: config in the address bar (address) and press the 'Enter' key, as you type the url of a Web site to open a Web site.
  
  If you see a warning then you can confirm that you want to access this page.

• Battery life lasts only as long as normal (die much faster) and actually fan of sounds he doesn't usually do?

  I got my MacBook Pro 13 "in October. Normally, the battery life will last all day or most of the day. Yesterday it started making noises of fan that she doesn't normally and then when I turned it on this morning it was 68% battery and after about an hour and a half, it decreased by 16%. He has never done this before.

  A know why this is happening and how / if I can fix it?

  Thank you.

  Hi klsym:

  Try to reset the system management controller (SMC) and see if that helps. Reset the management system (SCM) controller on your Mac - Apple Support

• Fast? on drop down/pop menus

  Hi thanks for the research.

  It's on the small white triangles in the toolbar that allows you to spin on more options of this tool. What is the deal with those? I hover and the hover and no additional options / sometimes they will work and most of the time they don't.

  IE: Forms a small triangle to access the ellipse, rectangle etc... I clicked and nothing happens. I go over it, same thing. I had to open up once and I seconded to use. Back into the Toolbox, and then he won't do it again.

  Is there a mouse sensative issue? I looked under prefrences... Strange thing in Flash.

  I use PC

  Win7Pro 64-bit.

  CS6

  Reference Dell monitor and mouse.

  Click and hold for a second or two until other tools see the, or Alt + click for clycle through tools