Muse do not save the changes inside the text boxes
Several (but not all) pages on my site of Muse are not saving the changes I make inside a text of some box. I can not specifically with the choice of font, size, color, line spacing and super/index. I tried to disable in-browser editing and some of the pages have since begun to save but not to save even more. After I made changes and saved the site, when I close the program and open it then later these paragraph changes back to the original.
I am very confused about why it's only a few pages and why that is the case at all. Any ideas or solutions would be useful! Thank you!
I think I found a solution. It seems that the problems I had with the changes that do not stick were somehow connected to the tool 'copy of development shaped at all breakpoints. Once I started into implementing shaped each breakpoint by hand he started saving properly.
Tags: Adobe Muse
Similar Questions
-
Adobe Muse does not save the file
Good afternoon. I have a problem with the file Adobe Muse. Once, I add to one of the accordion Widgets pages, Adobe Muse does not save the file. All menu files is no longer active.
link to a screen problem
link to a Web site already recorded and released
Please send your .muse file to my attention at [email protected] along with a link to this topic. Assuming that it is a recurring problem, it would be very useful to have more details on exactly what is being done between during the last activated menus and when they became disabled. A registration screen would be wonderfully helpful.
If the file is larger than 20 MB, you can use a service like Adobe SendNow, Dropbox, WeTransfer, etc. (if you use a service, please include your email address in the body of the message back, given that not all services to include it in the invite sharing they send.)
Thank you.
-Zak
Zak Williamson
Senior scientist
Adobe Muse
-
You can change the font size using the form in the preview (not with the text box). Having also arrow drawing trouble in preview.
What problems are you having with the arrow? You go to Tools-> annotate-> arrow and an arrow appears. Then you can drag around the head and tail to make it to the desired location.
-
Why the text box is so weird?
I'm trying to do something simple I have done a million times in Photoshop CS5 - create a text box with text inside. But something goes wrong and I can't quite understand it...
Note that the text box is now much larger than the display text. I would like to make this text box as wide as guide aligned on the box 'Donate '.
... But when I pull the right handlebar average a bit, look at what is happening in the text:
Any idea what's going on here?
Maybe you have a withdrawal of right margin of the paragraph, as in this screenshot.
-
Muse 2014 do not save the changes.
Muse 2014 do not save the changes. Everything freezes when asked to record. Can't do a save as or the other. However, can still operate on the record... but could not be saved. Very frustrating lost work and wasting time! Any ideas would be welcome.
You cannot send the file in response to these messages in the forum. The forum software strips attachments. Files must be sent directly to [email protected] as well as a link to this topic for the context. Thank you.
-
Pages is not track changes inside the text boxes?
I try to use Pages, industry changes, but it seems to be limited to body text. If I include images deleted, or if I change the text inside the text boxes, no changes are followed. What is a limit? (Version 5.6.1 of pages)
See this thread for an answer from VikingOSX, the short answer for the current Version is no.
Pages ' 09 fact.
You could always suggest via Contact us Apple to add this feature in the news
-
Firefox and Palemoon does not save the settings of a Web site.
He is a recent problem. I use Firefox 25.0.1 because progress of download in Firefox 26 changes are unacceptable.
I use www.nzbindex.nl a lot - Out of the blue Firefox will not save the settings, but will Google Chrome. In my view, that the problem is a Java problem. Any advice would be appreciated.
This can be caused by corrupted cookies or cookies are blocked (check the permissions on the subject: permissions page).
You can control and manage permissions for the domain in the tab currently selected through these steps:
- Click on "Site Identity" (globe/lock) in the address bar
- Click on 'More information' to open ' tools > Page Info "with the Security tab is selected
- Go to the permissions tab (Tools > Page Info > permissions) to check the permissions for the domain in the currently selected tab
Clear the cache and cookies only from Web sites that are causing problems.
"Clear the Cache":
- Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.
'Delete Cookies' sites causing problems:
- Firefox/tools > Options > privacy > Cookies: "show the Cookies".
It is not advisable to continue to use older versions of Firefox with disclosed security vulnerabilities.
-
My IPAD 4 takes great pictures but will not save the photo
MY IPAD 4 takes great pictures but will not save the photo
Don't know what your question, but the changes are saved to a file with the extension. AAE. If you are importing photos to a Mac changes will come with photos.
Import photos and videos from your iPhone, iPad or iPod touch - Apple Support
-
Windows Photo Gallery will not save the edited images
Windows Photo Gallery will not save the edited images. the files are not read-only; older files can be modified; the most recent files cannot
Message says photo library was beset with problems and the modified file cannot be saved
Windows Photo Gallery will not save the edited images. the files are not read-only; older files can be modified; the most recent files cannot
Message says photo library was beset with problems and the modified file cannot be saved
================================================
Windows Photo Gallery... Cannot save modified photos...No guarantees and proceed at your own risk!
Good luck...
--
(1) try to do a system restore to an hour before
the problem started.With the help of the Windows Vista system restore
http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/--
(2) I've seen reports that this problem may be related
Kodak Easy Share software. Installation "Kodak
Single-action Version 8 for Windows from the
the following link may be the solution.Kodak Easy Share 8 software version
http://www.kodak.com/eknec/PageQuerier.jhtml?PQ-path=130&PQ-locale=en_US&_requestid=5320
(FWIW, it's a good idea to create a system)
restore point before installing software or updates)--
(3) I saw reports that could clarify the next steps
until the question...Right click the library icon and choose
"Run as Administrator"--
(4) I copied the info from a tech forum on
the net... I don't know if it works, but maybe it's
worth a try:A. right click on Task Manager open the
taskbar on the bottom of your screen and choosing
The task in the menu Manager.B. click the tab process, along the upper part of the
The Task Manager screen.C. in the process tab, select the corresponding button at the bottom
left of the screen that says "show processes of.
all users"and click on it. Click 'Continue' to the UAC
the prompt that appears.D. the screen should turns off a moment, then
back with much more than process listed. Click
the "Command line" column to sort the list and
Search:"C:\Program Files\Windows Media Player\wmpnetwk.exe"
Read the description in the next section on:
Windows Media Sharing Service reader network
F. click on this process. Click the end «»
Treat button"at the bottom right of the screen.
Confirm 'End process' if necessary.You should now be able to save your changes to
your photos normally. The bad news is that this
should be performed whenever you start or restart Vista.
And I don't know how to prevent the situation from
in the first place of loading.--
5) posted by: artologik
The solution came to me when I could not recreate
the problem on a laptop with Vista Home.
Everything I could compare, I noticed that the
%Path% environment variable was not between different
the 2 machines.I guess that WLPG relies on the dll must be found
on the way to the system; When not found, it must return
Back to ' base or incomplete "library finds it
the default specific paths or the user. The solution for
me has been to ensure the entire path system
to the folders in the order appropriate.To fix, follow these steps:
A. right click on the COMPUTER icon on the
desktop and choose PROPERTIESB. choose ADVANCED SYSTEM SETTINGS
C. Si you are prompted by UAC to allow, go ahead.
and ALLOWD. click on ENVIRONMENT VARIABLES...
E. in the bottom half, under SYSTEM VARIABLES,.
Find the PATH variable and highlight theF. click the button CHANGE
G. ensure that what starts with
% SystemRoot%\system32;%SystemRoot%;H. ensure you that a semicolon separates each entry.
I. click OK three times
J. restart the computer
Good luck...
John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.
-
try to change the text in a saved file, but it will not allow isolate me the text, place the cursor in the text box or simply go back to remove.
Hello
in what format save you your file? If it's a jpg file, then the text is compressed and unfortunately PS is telling things as they are. Even if you could change the text before you save, after having been saved in jpg format, the text is merged and is no longer editable.
A good solution is to save the files as PSD files, photoshop files. In this case, all layers are saved uncompressed and so your text will appear in its own layer in photoshop. All you need to do in this case to change it is the result of a three-step procedure
(1) select the right layer
(2) take the text tool in the tools bar
(3) mark and change your text
So the crucial question is: in what format you save your file?
-
In the photoshop preferences, I have defined maximum compatibility "always." Muse won't matter, "place" my folder. I changed my preferences to "ask" re "saving as" with max compatibility so that I could always check the max compatibility has been verified during registration. Muse will not import the photoshop file. Is this a bug? Is there a solution?
Hello
When importing the file into Muse, what is the error/warning you receive. Could you please provide the full message or a screenshot of the error/warning popup
-
Reader 9.4 will not save the completed form of Pro v8
I just create a new form that Reader 9.4 won't let me save the changes are complete on. She can only look at one, editing, printing, but does not save the contents of the modified form. If I open it with Pro v8, it works fine.
I opened some forms that I created some time ago, and they work fine - view, navigate, print, and save the changes. It's just this new form which will not save.
Is there a setting some part that I inadvertently set which is the cause? My customer really needs this form, but it is useless if they cannot save the changes.
Also, I will check the updates on my 8, and now it's the v8.1.3. I uninstalled Adobe Reader and not reinstalled - no change. It also does the same thing (not allowing not saved) on two different machines.
Thanks in advance
The document must be enabled for the reader to be able to save a document updated the player. To do this, select: Advanced > extend features in Adobe Reader
-
RoboHelp for Word 7 is not save the rtf and won't compile .hlp
I use RoboHelp for Word 7 for producing WinHelp files. It has been working fine since several months on this computer.
Just in the last week, I had a problem with my Word 2007 when you try to open a .doc file. I received the message that the nswrd632.wpc converter was not found. After a search on the Microsoft forums, I edited the registry and saved this converter.
But now (and which may be unrelated to the Word Converter message) HR will not save the .docx or .rtf file. Whenever I click on save all, nothing happens. When I click project output, the message I need to back up the files, and I click Yes to all. Nothing happens except the message is closed. No files are saved and HR will not end. The only way I can get out of HR is to click on no, which means of course my changes are not saved. I can't save the file menu of Word .docx, either.
Also, I can not compile the file. Yet once, no error message, just does not compile.
I searched the Word HR forums, so that I reinstalled RH, made sure HR add-ins are enabled and removed all the .dot files. Nothing works. I went extracted 112 of Peter Grainge and followed the instructions there - no change.
I found that, after making my changes in the Word document, if I save manually the RTF file by going into the directory Word save slot, the changes will be saved and HR compile the .hlp file - once.
Any ideas?
Hi, I have a problem almost identical, except that my project uses rather than .rtf files .doc files. I was able to solve the "unable to save" problem by following the information below. I still have not solved the problem "cannot compile.
I use Windows XP, RH7 build 100, Office 2007. My project was created by using Office 2003 and I haven't lived all these issues until I recently upgraded to Office 2007.
This correction was sent to me by guy 'tech' in my group.
A number of Adobe RoboHelp for Word 7 users have reported that they cannot save the changes or generate output. The issue has been isolated to the RHComAdd.DLL be disabled.
Check in Word:
- For versions 2003, go to help | Everything | Disabled items. If RHComAdd.DLL display, re - enable.
- For Word 2007, click on Office button | Word Options | Macros complementary. Under 'Manage' select disabled items, and then click Go. If RHComAdd.DLL appears, highlight it and turn it back on. (This IS WHAT I DID)
You can also re - register the DLL. Go to start | Run and type the following line, assuming that you have installed RoboHelp at the default location.
regsvr32 "C:\Program Files\Adobe\Adobe RoboHelp 7\RoboHELP\RHComAdd.dll"
How to get off this DLL? The cause was identified as a Word document is open in Internet Explorer rather than in Word.
This problem has been fixed in version 7.0.2.
Hope this helps you. I'm still working on the compilation error.
-Shannon Mooney
-
HP 4620: HP 4620 scans very well, but could not save the analysis in a file
The scanner scans very well, but could not save the analysis in a file. Whenever I try to save, it crashes.
Hey @motikama,
Welcome to the Forums of HP Support!
I see that you encounter some problems with the scanning of your Officejet 4620 e-all-in-one for your Windows 7 PC. I can help you with that.
To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:
- Uninstall all software associated with the printer to your computer.
- Restart your PC.
- Download and install the latest drivers by clicking on this link.
Please let me know the results after following the above. If you can scan, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.
-
HP Photosmart Premium C410b: could not save the scanned images
I use the HP Scan application and the error message: -.
Could not save the scanned images
appears when you try to save in a folder as a PDF or any other format.
Ironically, if I'm going by sending to the printer and then save to PDF it works!
I checked and I'm using 4.2.2 with El Capitan HP driver software
Any thoughts?
Hello
The application from HP for your printer is not compatible with El Capitan, so the output files incorrectly recorded.
In the Hewlett-Packard folder move HP Scan to the trash and empty it.
Before you install and use the HP Easy Scan application below which should save the files correctly:
https://iTunes.Apple.com/us/app/HP-easy-scan/id967004861?MT=12
Kind regards
Shlomi
Maybe you are looking for
-
Satellite L650 no sound from speakers or phones
I.ve just had my first problem with my Toshiba Satellite L650 - particularly serious, because I rely on it for all my music playback! Normally I can plug and on the headphone jack on my stereo, speakers cut out and I get HiFi glorious while it is ins
-
A few questions about Satellite Pro P4600
Hey ^ ^ I have a few questions on my Satellite Pro 4600 1. How do I remove the keyboard of an intern? 2. How can I open the laptop, to add a pci card? or watsch the CPU? THX!
-
Analysis over the HDMI interface incorrectly detected as digital television
It is a question of reagrding the Toshiba Satellite Pro T130-15F. When I connect the laptop to my HP2159m monitor with a HDMI cable, the laptop detects the monitor as a digital tv. Accordingly he send a wrong signal, which translates into a bad image
-
Pavilion Dv6-7010us: help
Need help please I have a Hp Pavilion Dv6 with the administrator password or power on system disabled password code is 62615432 thanks in advance
-
Unable to print after the capture and filing error OneNote should run once.
When you try to print after capture and deposit, it indicates that Onenote should run only once. Is this something that I now have to buy that worked before? OT: Snipping Tool