Must be the power issue

Similar Questions

• When you try to reinstall Vista the following message is displayed: must remove the power cell.

  Try to reinstall Vista via the Vista installation disc.  However, the following message appears: must remove the power cell.  What is a power cell and what is the solution for a re - install?

  Thank you

  Rick

  Hi Rick,

  1. you are trying to boot from the disc or start on the desktop to start the installation?

  If you don't have any concerns of data, you can continue the installation without removing the program.

  If you have any concerns of data, then try to remove the PowerShell and run the install. Also perform a backup of important data before reinstalling Windows Vista.

  Refer to Microsoft KB article for more information:

  You cannot pass a Windows operating system when you have Windows PowerShell 1.0 installed

  http://support.Microsoft.com/kb/950376/en-us

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Turn on the power issue

  I have can´t turn on my laptop Presario CQ60-300EO. No power problem. The led lights next to the connector 12VDC in laptop. Could it was the battery to do this problem?

  I have no guarantee. The laptop is about 5 years. Buy a new battery and see if it help you.

• 15 170tu ac: I HAV to press the power button several times to start the laptop...

  I HAV to press the power button several times to start the laptop... works well with the power supply on.

  all My drivers & bios is updated... but when I opened the lid... I HAV poer press several times the button and he then began 4-5 min.

  Hi @Vishalwagh123,

  Welcome to HP's Forums a great way to get help. It's a great place to find answers and advice! Thanks for the post.

  I understand you have questions turn on/off the device and you must press the power button several times for him to start. I'll be happy to help you.

  Please try these steps first. Perform a hard reset.

  • Steps to do:
  • Turn off the computer and unplug the charger. Then remove the battery.
  • Press and hold the power button on the unit for 15 seconds to carry out the static electrical charges inside the machine.
  • Replace the battery and the charger plug it back. Try to turn on the computer.

  If it fires up immediately the issue is resolved. Otherwise, try to turn on the computer without the battery and check that it works immediately.

  In your message, you said that it works very well with the charger. However, I need more clarity here to help you better.

  It works immediately when the adapter is connected and the power button is pushed only once?

  If you again press the power button several times, it may be a faulty power button, and you will need to contact the hotline at the service of the unit.

  Let me know what happens when you try to turn on the unit without the charger?

  Visit this link to contact support phone:

  http://HP.care/2bjG4nE

  Hope the problem is solved without hassle. Please keep me in the loop.

  Take care and have a week Holy.

• NB200 abandoned wireless connection when the power cable is plugged

  ALL ideas welcome, my notebook NB200 drops Wi - Fi when it's attached power alternative, on another forum, someone suggested I could change the power settings to avoid this problem, but not how, all ideas welcome, thanks
  kazz45

  > I found the power options, but all that it gives me a choice of power management, which is energy-saving Toshiba which corresponds to the current setting, I see nothing wireless on the tabs it?

  You must discover the power plan that is used when the power adapter is attached.
  Then, you click on change the power plan settings

  New window would be open where you will find an extra option called change advanced power settings

  Now you will see further options. Scroll down the settings of the wireless adapter and make sure both options are set on the performance

• I forgot the answer to my security question, I tried to update these answers, but to update them also, I must first answers old issue of security which I forgot how can I update and change my security question and the answers?

  I forgot the answer to my security question, I tried to update these answers, but to update them also, I must first answers old issue of security which I forgot how can I update and change my security question and the answers

  ?

  You must ask security team account Apple to reset your security questions. To contact them, click here and choose a method; If this page does not list one for your country or if you are unable to call, complete and submit this form.

  (143315)

• HP Officejet 4630: HP 4630 gets printer fault. Must cancel doc, power off the printer, then restart. There is WI - FI connected

  HP 4630 gets printer fault. Must cancel doc, power off the printer, then restart. There is WI - FI connected.

  It then prints until I have change entry. Then it occurs and stop and restart is necessary.

  FAX and SCAN properly.

  Hello

  Thank you for using the HP Forums. You can try the following:

  Please download and run the HP Print and Scan Doctor (PSDR) tool to diagnose and solve your problem

  http://h20180.www2.HP.com/apps/NAV?h_pagetype=s-926&h_lang=en&h_client=s-h-E016-1&h_keyword=DG-PDU

  Hope that helps.

• You must give the line of the menu on screen of the browser. The one with bookmark and leadership on this issue.

  Question

  I have another type of problem with Firefox

  Description

  You must give the line of the menu on header of the browser screen. One with bookmark file top

  This has happened

  Each time Firefox opened

  When I clicked on the wrong button

  Version of Firefox

  3.6.3

  Operating system

  Windows XP

  User Agent

  Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; RV:1.9.2.3) Gecko/20100401 Firefox/3.6.3 (.NET CLR 3.5.30729)

  Plugins installed

  • -Default plugin
  • Shockwave Flash 10.0 r45
  • Windows Presentation Foundation (WPF) plugin for Mozilla browsers
  • Next-generation Java plug-in for the Mozilla browsers 1.6.0_16
  • Deploy Script NPRuntime plugin Library for Java (TM)
  • Adobe Acrobat plugin Version 7.00 for Netscape
  • The QuickTime Plugin allows you to display a wide variety of multimedia content in Web pages. For more information, see the Web of QuickTime site.
  • Npdsplay dll
  • DRM Netscape Plugin store
  • DRM Netscape Object network

  See the first item.

  Don't see the menu bar not (File, Edit, View, history, Favorites, tools, help)? Press and hold the button (Windows) (Linux and OSX see article below) and the following letters in this exact order: V T M
  The bar of menus must now appear permanently, unless you turn it off again (view > toolbars). Turn on/off the menu bar is a new feature in version 3.6.
  See: http://support.mozilla.com/en-US/kb/Menu+bar+is+missing

  Navigation, bar toolbar bookmarks and other toolbars under view > toolbars. By clicking on one of them will place a check mark (display) or remove the check mark (not shown).

  To display the status bar, view, and then click status bar to place a check mark (display) or remove the check mark (not shown).

  Mode full screen
  http://KB.mozillazine.org/netbooks#Full_screen

  See also:
  Back and front toolbar buttons or others are missing
  Customize controls, buttons, and Firefox toolbars

• Lenovo Y40: Must only press the power button two times to turn on

  Hello

  A few months ago, I bought my Lenovo Y40 on the Lenovo Web site and recently, to turn on, I have to press the power button twice. When I press that once, the Lenovo logo is displayed on the screen, but after 2 seconds it turns off. On the second attempt, finally the laptop turns on and the windows is started.

  In addition, rarely the phone stucks on the lenovo logo screen, is necessary to contain the power to reset.

  Someone had some problems like these describe above?

  Thank you.
  Pedro Lopes.

  Hello

  I contacted Lenovo's Support and they recommended to perform a full recovery of the system. Apparently, it worked because I did not suffer these problems since I got windows. Probably, there was a problem with the partition that has been responsible for the initialization of the system.

  Thank you, Pedro h. Lopes.

• Unplug the power to the laptop causing issues of java.

  When I unplug the power cord from my Dell D630 I am unable to run some Oracle applications using java.  Parts of the screen (including the sidebar) seems to blink and does not at all what I'm typing.  If I reconnect the power cord stops flashing and the Oracle application session begins to work very well.  My research leads me to believe that the Aero theme is involved. Running Vista SP2 and Oracle Jinitiator 1.3.1.22.  I've upgraded to the new java but no help. If the computer laptop cord is plugged it all works fine.

  Any ideas?

  Hi gdoogle1,

  Oracle Jinitiator 1.3.1.22 seems to be compatible with Windows XP, 2003 & 2000.

  You may need to download Oracle Jinitiator 1.5.0_06 which is compatible with windows vista, see the link below:

  http://www.Oracle.com/technology/products/forms/htdocs/10gR2/clientsod_forms10gR2.html

  You can also check with the provider of the program for a plug-in or an update of the program, see the link below:

  http://www.Oracle.com/technology/software/products/developer/htdocs/jinit.htm

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• the power cable must be plugged or removed after fully charging the battery?

  Is there a problem with do not remove the power cable, after that the battery is fully charged on the Alien ware M17XR4?. In other words do fine even if the power cable is not disconnected once the battery is fully charged on the M17XR4?. Advice needed please.

  Most of the Lithium batteries are 'Smart Batteries' these days. It is a smart charging circuit.

  These means that they can detect when they are fully charged and continues to load (for some reason, so they do not over heat or explode).

  You can see in Windows that battery knows when she is fully charged (and cargo stops).

  However, I still like to bike (or run on battery... up to 30% or more) at least twice a month.

• Satellite L50 - B - 21 G: abandon WLan connection / power issue

  I bought my laptop about six weeks ago and its driving me crazy. I could be sitting with him and suddenly I lose the internet connection, I try to reconnect, but cannot as he seems to have "abandoned" the Broadcom 802.11n network adapter. I'm not very irritable but sees someone else has had this problem and follow a few instructions to restore the previous driver for the network adapter, but it just made things worse.

  In addition, I can never turn my laptop. If I choose the "shut down" option then it turns off, but there is always a light flashing around the power button. I heard he's going a few hybrid sleep, but I had instructions to stop this, but again its happening. I can't just press the power button to restart the laptop it restarts with the loss of the network adapter (see above), so I sit in pressing and holding the button several times until it restarts finally with the back working network adapter.

  If I just stopped the lid (as I applied this option overall upwards), then three hours I can just return, press a button and begin to work, however, once again, I can not because the network adapter is down and I have to then push and hold the power button (that choose shut down doesn't seem to work).

  This laptop was designed to replace an old ADVENT that caused me grief, but I'm done with nothing else than a box of junk that I want to throw. Worse yet, I'm not at all way techy am so not able to do what many of you can do to correct problems so I tried to find a phone number to call Toshiba and never get an option to type in what is my problem and then follow the online help that I tried and does not work! Y at - there someone who can give me a number for Toshiba that I can call for help if I need help more than anybody can give me here? Thank you.

  I have already answered in another thread with the similar question of Wlan and I guess it could be a related issue of energy saving:

  Reach:
  Windows power options - choose the right central - advanced power options.
  Search of the WLan card settings and set it to "best performance".
  You must also set the parameters for the PCI express for the 'best performance '.

  In addition, go to the Device Manager. Choose here the Wlan card properties
  Switch to the last tab called "Power Management" and make sure that the option available in this tab is not checked!

• Satellite PRO A200 power issue - will not start

  Toshiba Satellite PRO A200 (model PSAE4E-00U004EN)
  OS Vista Business (not that get us here!)

  OK, here's the problem: battery led (blue), AC disconnected. Turn on (absolutely no hard disk activity)

  See attached picture + 30 seconds of video...

  Image = http://i37.tinypic.com/2lv00ow.jpg
  7 MB video = http://tinypic.com/player.php?v=294ns6r&s=4

  Here's what I tried...

  Removing the battery
  Remove and put back in place the two sticks of RAM
  Withdrawal of one of the sticks of RAM, a start in (and vice versa)
  Withdrawal of the DVD player
  Hold the power button for 20 seconds to evacuate the residule power, then plug back
  Holding the Fn key and pressing the power button
  Holding the 0 key and pressing the power button
  Still nothing...

  I hope you guys can help out me? Tomorrow I'm going to disassemble the laptop, maybe there is a blocked fan and this is a heat issue? or otherwise perhaps the power button is somehow disconnected?

  I downloaded and printed the disassembly instructions
  (http://www.irisvista.com/tech/laptops/toshiba-satellite-a205/laptop-disassembly-1.htm)

  Please help me!

  Hello

  Looks like a serious problem.
  But for the first time, try this:

  -Remove the battery and unplug the AC adapter
  -Wait about 20-30 min
  -Reconnect the two parts and try to turn on the laptop

  If it is not possible to power the laptop then the problem must be related to a serious hardware problem and only the ASP would be able to help you and to see what's exactly wrong with the machine.

• Satellite L755-M1CU restarts as soon as the power supply connected

  I have an old L755 of 3 years.
  4 months, one day, the laptop just completely turns off and restarts as if nothing had happened.

  I was puzzled, but I thought that I must have accidentally hit a button that caused his restart.
  As the days have begun to spend to buy, the number of reboots has started up.

  At first it would occur once a week, then twice, until 2 months ago, when it started to happen almost every 5 or 6 hours, I used the computer. Initially, I thought that this was due to the death of laptop battery.

  So I got rid of it and started using it only on the sector without the battery shows but found that it was not feasible since there are frequent power outages in my area.

  Then I go back to work on the laptop with a trendy new inserted battery and ac, but the frequency of reboots continued until it was happening every 15 minutes.

  So I tried to boot into safe mode and everything works absolutely fine. Zero restart little matter how many time I use it. Since last week, I can no longer turn on windows normally with the power source is connected. Windows works fine if I'm on battery only.

  Even when windows is running on battery, as soon as I plug in the charger, the phone restarts. What could be the reason?

  I did some research online and found that some models of satellite have a defective capacitor installed called the NEC/Catherine causing similar problems.

  Thanks in advance guys.
  All reviews are much appreciated

  These issues are still problematic, and they should be considered. For me, this looks like electronic power supply.
  It could be that electronic power make certain thresholds for some reason any.
  To be honest, I can't imagine that you can do something. All you can do is check the usual stuff like RAM, HARD or OS disc, but it will not help you issue described.

  If everything works OK with battery power, it would be interesting to test it with the new adapter.
  It's really not easy to say what the problem is here.

  Try to contact Toshiba service nearest, to explain the situation and ask for help.

• Satellite L550-1CW does not start by pressing the power button / stop

  I have a Toshiba Satellite L550-1cw that won't start, lights up when I press the power button all the lights at the front, the fan starts and he is looking for a HARD drive for about 2 seconds and then stops.

  I tried a new HARD drive, but the same happens.
  I was told that all this must be ignored and buy a new one that is not an option.
  I love this laptop and want to run again as this is the best I have ever owned.

  Help, please

  Andrew

  Can you give us more information on this vulnerability?
  You see something on the screen after pressing the power button?
  You can access the BIOS by pressing the F2 key immediately after switching on the device?

  Despite this whole issue, I think that if nothing is visible on the screen it could be a serious problem with one of the following: RAM modules, motherboard, CPU/GPU.

  From my experience the RAM memory modules are not very expensive (2nd hand might be good enough) and the replacement isn t very delicate in the case where the faulty memory causes this problem, the laptop could be set for a little money.

  But in case of problems of motherboard, laptop repair procedure could be very expensive.