Turn on the power issue

Similar Questions

• My MacBook Pro with El Capitan 10.6.11 close the menu drop down. I have to turn off the power

  The closing down and options no longer work in El Capitan 10.6.11 restart on my MacBook Pro mid-2012. I have to press the power button to turn off.  When shutting down or restarting are selected, the Ribbon at the top of the screen disappears and Finder is no longer available but other aps on the bench of the accused are still available. When I restart after turning off the power, the system is back to normal until I need to close again.

  Hello

  Just in case, run disk utility.

  Open utility disk located in Applications/Utilities

  Then select the disk to boot on the left and then select the first aid tab and then click run.

  If disk utility indicates that the disc seems to be OK, you are finished. Otherwise, you must repair the disk.

• The new App Store for El Capitan update has locked up my macbook pro.  Reboot got about 3/4 fact and the machine stops. Turned off the power and turn it on again for nothing doesn't.  How in my machine to begin troubleshooting?

  The new App Store for El Capitan update has locked up my macbook pro.  Reboot got about 3/4 fact and the machine stops. Turned off the power and turn it on again for nothing doesn't.  How in my machine to begin troubleshooting?

  The problem is most likely an attempt to update a system malfunction prior it is probably a problem with your computer, not the El Capitan.

  Start by:

  Reset the PRAM and NVRAM on your Mac.

  MacIntel: Reset of the controller (SMC) system management

  Start in Safe Mode , and then re - start normally. It's slower that a normal start, so be patient.

  If you are unable to start;

  Reinstall El Capitan without erasing the drive

  Please make sure that you back up.

  1. Restart the computer. Immediately after that the chime hold down the command and R until the Utility Menu appears.
  2. Select disk utility, then click on the continue button.
  3. Select the withdrawal (usually Macintosh HD) entry of the volume in the list aside.
  4. Click first aid icon in the toolbar. Wait until the button is active, then click it.
  5. Quit disk utility and re-enter the Utility Menu.
  6. Select Reinstall OS X and click on the continue button.

  Also, see this tip for user: basic steps for the OS X upgrade.

  If this doesn't get you;

  Install Yosemite or El Capitan, from scratch

  Backup if possible before proceeding.

  Restart the computer. Immediately after the chime hold down the command and R buttons until the Apple logo appears. When the Utility Menu appears:

  Select utility disc in the Menu Utility, then click the continue button.

  When loading disk utility, select the volume (entered into withdrawal, usually Macintosh HD) from the list of devices.

  Click Delete in the main window of disk utility. A panel will fall.

  Define the type of Format Mac OS extended (journaled).

  Click on the apply button, then wait for the done button to activate and click on it.

  Quit disk utility and re-enter the Utility Menu.

  Select reinstall OS X and click on the continue button.

• Satellite L20: Can I disconnect devices such as USB mouse without turning off the power?

  Hi all.
  I am owner of laptop Satellite L20. I always turned off power to my computer when I need to connect or disconnect a USB device. Some devices have a special icon on the toolbar disconnect them, but some don't (FDD USB or flash drives). Can I disconnect and connect devices such as mouse USB or Scanner wihtout turning off the power?

  Hello

  You can disconnect the external USB devices without turning off the unit, but you must use the option "remove hardware" before you cut the material.
  The icon "Remove hardware" usually appears with resources such as hard drives or USB key have the ability to buffer data. It of necessary for this buffer to the device before emptying it is disconnected

• S2415H, PSM, turn off the power indicator "pulsed"?

  Can I turn off the power in Active mode indicator, but it would also power off when it enters PSM (power saving mode). Very disturbing at night in the room. Any way to do it?

  That's how I've always used my monitors over the years. Mine have always done well after the warranty period of 3 years.

• LJ Pro300 color MFP M375nw. Power cycling, displays "49 service error - turn off the power, then press" on-screen.

  Bike constantly, the power display "49 service error - turn off the power, then press ' on-screen before stopping.
  For this printer only when it is connected to the network. Quite happy to sit quietly when printer NOT connected to the network.

  Unplug the network cable from the printer, check and clear all print queues (there may be a doc pdf sitting in a pc or server print queue)

  Once the queues have been dotted, restart the printer and reconnect the network cable.

  If this does not cure the problem, then the likely problem is a defective formatter Board.

  Good luck!

• Cisco router WIFI does not work after turning off the power

  I have a CISCO router that worked very well until someone turned off the power for a few minutes.  I tried to unplug the modem, the router and the laptop and waited a bit.  Then I turned on the modem, then the router, then my laptop but it is still not in communication with the modem.  I can use the modem with a hard connection to the laptop but need the WiFi as well as others can use it.  Help, please.

  You need to contact support with your Cisco router.  It looks like it might have been reset and the installation needs again.

• Why am I being asked to press F8 after you turn on the power?

  I currently have a Toshiba laptop running windows 7. and its practically new so I'm pretty unhappy about... When I turn on the power, the toshiba logo blinks normally and then instead of starting windows logo, a black screen comes asking me to press F8 or F9 I don't know, because it flashes for a few seconds and then the toshiba logo comes new follow-up by Mr. black screen the same rehearsal process until I press F9.i dnt know wot to do.i tried system recovery.it dint help.pleaase suggest.

  [Moved from comments]

  I am currently using a laptop Toshiba running on windows 7. and his almost new...

  assuming that it is brand new, please contact toshiba support for assistance.

• TOSHIBA Power Saver software is turn off the optical disc drive, and I'm unable to re - turn on the power.

  Original title:

  Aloha!

  I have a Toshiba Qosmio x 775-3dv78 running Windows 7 Home Premium x 64.
  Similar to another old post here, I have an intermittent problem where the Toshiba Power Saver software is off the ODD (a Matshita UJ240EF - BD - RE) and I am unable to turn on the power.  To put the ODD back on, it's a matter of restarting (sometimes several times) until the STRANGE somehow turns on.
  Sometimes, when I do a hot or cold boot, a window opens asking me if I want Toshiba Power Saving technology to turn ON the ODD.
  I click 'Yes', but the drive remains switched off.
  I also try to use function - same key controls... The STRANGE remains turned off.
  Here are the "best":
  As described in the former post office, inside the Windows power settings, there is a slot layout titled "TOSHIBA Power Saver Settings v8.9.9.64".
  In this context, normally there is ONLY a framework for 'cooling method.  BUT only when the ODD is disabled, a second parameter appears to "Optical Drive Power".
  Change that on ONE for battery and plugged in fact NONE no difference... The STRANGE remains OFF!
  Toshiba support is of no help.  Their answer to this problem is to run a 'Mr Fixit' which I discovered just unrecognized devices and then removes the upper and lower filters for the reader.  This "difficulty" might work from time to time... when it does, the ODD is somehow transformed into a 'removable' instead of one device ATA device.
  But then in a few days, the STRANGE turns off again.
  Something different maybe notable, I found after that I continued services and the related process, programs is that the version number on the Toshiba modules show "8.9.6" - not the "8.9.9.64" in the window Power Options.
  And before you ask (LOL!) what's happening on a soft reinstallation of the operating system by the media of recovery Toshiba with all Windows 7 updates applied.
  While I'm waiting for a possible response, I'll do the following:
  Uninstall and reinstall all THE software Toshiba provided duty with the STRANGE (energy saving, combustion, players, etc.)
  I will also shoot material part and make sure that the STRANGE is well inserted in the connector (IDE?) and that the connector is firmly attached to the motherboard.
  IF who does things, I'll update this message and inform you all.
  Otherwise, any ideas would be GREATLY appreciated!
  Mahalo!

  Hello

  Method 1:

  Run the electrical troubleshooting utility and check.

  Open the troubleshooter of power

  http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter

  Method 2:

  I suggest you to change the power settings and check.

  a. click the Start button, type Power Options in the search field and then click on Power Options in the list of results.

  b. click on Change Plan settings for power management already select.

  c. other click on change advanced power settings

  d. expand TOSHIBA Power Saver Settings Vxxxxx and change the optical drive power managementsettings.

• Satellite X 200-203 turns off when turn off the power

  Hello

  first of all, excuse my bad English please.

  Since 2 days I have the satellite X 200-203 portable and my first problem is that the battery does not load.
  When I connect the power he works very well, but did I unplug the power replisse or the laptop turns off. under vista it shows me always a 89% battery power, ALWAYS.

  What can I do?
  at least, the satellite logo lights up red annymore.

  Thank you

  Hello

  According to your description, the battery provides the laptop with power.
  In my opinion there is problem with the battery itself or electronic supply on the motherboard.
  I think that it of a failure of battery, but to be 100% sure that the audit of the books is necessary!

  The X 200 is a new series of laptop so I'm 100% sure that the guarantee is valid. Am I wrong?

  If you shouldn't t waste time and contact the service provider authorized in your country.
  The guys of the explain your situation and ask for later handling.

  Each cheque replacement and part is done for free!

  Good luck & congratulations guy ;)

• Satellite A300-17N - turn on the power by touching the button player media

  Hello

  I have a question about Satellite A300-17N. Is it normal to power by touching the button Media Player? Because I can turn it on by pressing the power button (which is normal) or pressing the button on the media player.

  Thank you in advance,

  AEM

  Yes this is normal. the idea is to push the button to load Windows and autorun a media player.

• Satellite A100 - turns off the power after 60 seconds

  After pressing the power button, the laptop starts but 60 seconds from the moment it is activated, the it turns off suddenly?

  The fan turns, I tried cutting dvd, wireless, modem, ram, hard drive, it opens and clean all the dust. It turns off after 60 seconds exactly every time

  Any ideas?

  Thank you
  Ben

  Hello

  > and clean any dust
  How did you do that?
  Usually, you can use jet of compressed air to clean the laptop and remove the dust that blocks the fan. That is why it s not necessary to disassemble the laptop as you can read here:
  [How to clean a Toshiba laptop cooling system? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=40]

  And the same thing happens if you access the BIOS instead of starting in Windows?

• E 7520 HP All - In - One Printer: turn off the power to the wireless printer

  I have not printed for a few days I have not noticed if my Wi - Fi connection worked.

  I tried to print wireless today and got the error message that the printer was not connected to the internet.  I tried to go wrong, but it did not help.  I checked the connection to the wireless router and put the password in.  It has not yet recognized it.  I tried to disable printing for my smart phone (I think it is called), but the screen froze on the circle showing the progress.

  I tried to turn off the printer with the power button, but that no longer works.

  The Wi - Fi light just keeps blinking.

  How can I disable the printer may reset?  Or can you help get my printer to recognize my wireless again?

  Thank you.

  Hi Rhonda, there.

  I would suggest to unplug the power cord from the printer without turning it off with the switch, it will do a reset without getting rid of all the parameters. You simply leave unplugged for about 1-2 minutes to clear out any power.

  I recommend then reconnect, and doing as much as you can from the guide below:

  Printer keeps no connection Wi - Fi

  Good luck and let me know how it goes

• Compac presario cq 50-209wm: turn on the power button is lost-is there a way to boot the laptop with it

  During a recent move, my lap top has been damaged with the power on / off button was broken.  Is it possible to power upward with this button.

  Thank you

  Barbra

  Hi @snow2 ,

  Welcome to the HP Forums!

  I saw your post looking for another way to turn on your laptop. Unfortunately, you'll need to obtain redress. You can reach HP Total Care at 1-800-474-6836 in North America or Start here if you live outside of North America.

• Turn off the power limit Ad Tracking?

  Hello! I have a problem with the feature "search ad limit. The cursor is gray and will not let me turn off, saying that I have less than 18 years when I'm not. I've already changed to 'allow changes' restrictions and I don't know if I have apps which force advertising, tracking, and I don't know how to fix this, if this is the case. Help, please! I need this setting off to access certain applications of mine! I am also on a personal Apple ID.

  Turn off wifi and cellular data, then click on the button of advertising in privacy and turn off the announcement of limit button