My CD/DVD stopped working Optiarc DVD RW AD-SCSI 75805

Similar Questions

• DVD/CD RW optiarc dvd rw ad-7560 s ata device suddenly stopped working I get a "code 10 this device cannot start.

  My CD/DVD RW optiarc dvd rw ad-7560 s ata device suddenly stopped working I get a "code 10 this device cannot start.  I have uninstalled and still get this error.  When I put a CD in nothing happens.  It is not read.  Any suggestions?

  Hello

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Equium A210 - after that set BIOS to update the DVD player has stopped working

  Hi, since I have recently updated my BIOS, my DVD drive has stopped working on my Equium A210-1AS with Vista 32 bit.

  I tried the program fixme Microsoft who does not work, upper and lower register isn't here ether in regedit.
  Someone at - it solutions for getting the DVD drive working again?

  Thank you

  Hello!

  The CD/DVD drive is listed in Device Manager? You see an error code?
  If the drive is listed in Device Manager, you should try to remove it, and then restart the laptop.

  Try to load the default settings in the BIOS.

  Have you tried to remove the upper and lower filters by yourself? Here is the solution from Microsoft:
  http://support.Microsoft.com/kb/314060

  Good bye

• Satellite L300 - DVD Toshiba drive stopped working

  I have the Satellite L300 and Vista Home Premium installed.

  When I try to open the DVD player, it is said: "Toshiba DVD has stopped working. Try to find the solution for this program. »

  It was working before. I watched 3 movies on it and then simply collapsed without known reason.

  Do not want to reinstall if not necessary.

  Hello

  > Don't want to reinstall if not necessary.
  I m not very well why the software doesn't work anymore, but I think that it s advisable to reinstall.
  You must first remove the old software (reader Toshiba).
  Then you need to download the most recent version of the page of the European driver Toshiba DVD player and needs to be reinstalled it.

  Check it out!

• Equium A300D - ODD stopped working and do not read cd/DVD

  My CD/DVD drive has stopped working yesterday and does not read disks. It appears in the form E drive in my computer. When I click on it, it is open to insert a CD-ROM but it still ejects so an error message "Microsoft Windows: an error has occurred in eject DVD RW drive E'"
  I uninstalled the driver and reinstalled it but nothing has changed! What does all this mean?
  Thank you

  Hello

  First remove the drive CD/DVD from the list of Device Manager.
  Then start the registry (regedit) and remove the upper and lower key filters:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  You will find here more details:
  http://support.Microsoft.com/kb/270008/en-us

  Good luck

• Qosmio G30 - DVD-ROM drive has stopped working

  I have a Qosmio G30 age of 3 years and the DVD - ROM drive has stopped working.

  He still pulls in, but it will not read or burn discs.

  I received a quote of £360 Toshiba to adapt to a new one that seems generous.

  Anyone know where I could get it fixed cheaper than you?
  Or better yet... anyone know where I can I get it fixed?

  David Hutchinson

  Hello
  This is not an answer to your question but can solve the problem if it is the same that I had.
  In my case, the drive tries to spin but it slips. Only the motor shaft rotates and the drive remains at low revolutions that were not even stationary.
  The problem was caused by the fact that the plastic part (black color) of the mechanism which engages the disc (CD or DVD) slips on the
  motor drive, axle and th couldn't do a full rotation or runs at the specified speed.
  The solution is to delete the article in plastic and put a small amount of super glue on the axle and then put it back.

  Where there is a similar issue, I hope that solve you it like I did.

• Cannot use DVD BD Player: WIN DVD MFC application has stopped working

  Tried to install my old version of WinDVD and failed and in the process perhaps accidentally deleted a file,
  now every time I try and use DVD BD drive I get the following message:

  "WIN DVD MFC application has stopped working"

  I tried to use restore point, but still get it, can anyone advise please?

  It will be interesting to know what model of laptop you have.
  Anyway, in my opinion, there is a software conflict. I guess players use even modules or plug-ins, and there is a conflict.

  I put t know what solution can be, but maybe you should remove both players, restart your laptop and make own BD drive in the hope that it will work properly.

• Satellite P300-156: CD/DVD player has stopped working

  Hi people,

  I have a P300-156 and since I bought it, I had a problem with the DVD recorder... ok I know I should take that back!

  Sometimes when I press the eject button, that nothing is happening outside the orange light flashes and continues to blink. When this happens that I lose the drive in my computer and the only way to make it work again is to restart the laptop.

  Usually, it works when I reboot then stops working, but it doesn't also sometimes from the restart.

  Someone at - it ideas.

  Thank you

  Dan

  Hello!

  Have you looked on the Toshiba site for an update of the firmware? Search on the Toshiba site for an update, maybe this will solve your problem.
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  However, I think it could also be a hardware problem that your drive is defective. Then I'd go to a local ASP. A technician can check your laptop.

  Good bye

• What can I do this message-"Toshiba DVD Player has stopped working"

  Hello

  My DVD drive used for good work... and then I installed iTunes.
  He then worked for a while, but only by using "Run as Administrator".

  After a few weeks I started getting the message "Toshiba DVD Player has stopped working".

  I uninstalled iTunes - and uninstalled and then re-installed DVD player - but it still doesn't work!
  Any solution please?

  Thanks in advance for your help.

  Ms. Q_reeus

  My solution is to remove a Toshiba DVD drive and install VLC player. You can get it for free.
  It can play all video formats, and you don't need additional codecs.

• CD/DVD player suddenly stopped working and undetected on M30X

  I have a Toshiba M30X laptop. My CD/DVD drive has suddenly stopped working. When I push the eject button nothing happens. No lights on the front of the disc door. When I look in my computer the drive still shows up! I have nothing extraordinary, before this problem occurred, it appeared after that I started the mobile upwards as usual this morning. I would appreciate any advice that anyone can be able to provide.

  What is the BIOS? BIOS recognize the drive?
  If this isn't the case, so it could be a hardware problem.
  If your laptop is under warranty then contact the service partner for a replacement

• Equium A100: CD/DVD drive stopped working code 22

  Toshiba Satellite A100 on Vista operating.
  CD/DVD drive has stopped working and shows it as being disabled. Tried to re - activate but the error code 22. Can anyone help?

  Hello

  The Microsoft page provides information about error code 22

  * This device is disabled. (Code 22) *.
  _Recommended resolution_
  + Activate the device using Device Manager. +
  + In Device Manager, click Action, and then select device. Starts the Enable Device Wizard. Follow the instructions. +

  Looks like you have already tired it. Well, in your case I would recommend removal of the CD/DVD drive from the list of devices in Device Manager. Mark simply the unit a press to remove.

  Then, restart the computer and check what is happening.

• CD/DVD-Rom on a Satellite 1110 laptop has stopped working

  Hello

  The CD/DVD-Rom on my satellite 1110 has suddenly stopped working. When I insert a cd or a dvd there is no activity in the drive and when I look in my computer there is no recognized files.

  I used the Device Manager and it says that the device is working normally. It's like the PC just can't 'see' the camera more.

  I used the program of troubleshooting without success and I was wondering if someone technically a little more spirit that had me ideas

  See you soon

  Rob

  Hey, sorry cannot be of any help to you, but I'm having exactly the same problem. I can't find a place to download the new drivers.

  did you progress?

• Drive DVD SD-R5112-NEB has stopped working - need a compatible

  Hello.

  My Player DVD SD-R5112-NEB has stopped working. Please notify compatible replacement, possibly upgrading to faster drive.
  Thank you. Scottowner

  Upgrade procedure is not the same for each laptop model and it is very important to know what model of laptop you have. You can also view s manuals for your laptop and I hope that you will be able to find a list of compatible optical disk drives.

  Bye and good luck!

• Carpet * a dvd - ram uj-850 s in a Satellite P100 has stopped working

  Toshiba satellite p100-286, I bought months ago.
  DVD player has stopped working. The dvd led is turned on, but I can not read my CD or DVD. Is - this hardware problem? Or maybe vista?
  Please someone help me.

  Really sounds like a hardware problem the P100 is a new laptop and warranty should cover all replacements
  Ask at the service of your country for replacement. Everything will be first to check the notebook and then you should get a new ODD (optical drive)

• Satellite P100-444: DVD-RAM UJ-850 s stop working - error Code 39

  The DVD_RAM stop working.
  Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)
  It is showing drivers cdrom.sys.

  How can I find new drivers for UJ-850 s?

  Hello

  First of all: you can not download the driver for the CD/DVD drive. The Windows operating system uses the own driver and it s not necessary to install a special driver for ODD.
  Therefore, the link provided by the user above won't HELP YOU NOT.

  Second: I studied in this forum a bit because many afterwards with the same problems, where already posted:
  Check this example:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=13843&MessageID=50483

  You will find a link to the MS site that provides a nice solution.
  Please try the first method:
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;320553

  Keep us in the loop