my cd player is not reading any cd

Similar Questions

• My boom box CD player will not read any disk, what can I do?

  My boom box CD player won't read any disks.

  I'm sorry to know that you have a problem with your portable player.

  Can I have the number of full model of your device? You can see on the first page of the manual or the front or rear of the unit (e.g., CFD-G700CP).

• Satellite A300-1MC - CD player does not read any disk

  I have a brand new A300-1MC, old so probably not a malfunction already 5 days only!

  Yesterday I have it configured my printer and camera, no problem at all when playing the discs. However, tonight the CD player is not just reads any disc, have tried everything from a DVD on a music CD.

  I'm not too hot with the computer stuff but hoping that someone out there will be able to help and hoping it's something really simple! Did a scan for virus, just in case, but nothing appeared.
  A big thank you in advance, Carol.

  Hello!

  Windows recognize the drive and the BIOS also?

  On the Toshiba site I founded a firmware update for Toshiba or Pioneer drives.
  If you have such a reader, download and install the update.
  http://forums.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good bye

• Tecra M5: DVD player does not read these mini DVD

  I have canon handycam dvd and mini dvd works on it. A month back I recorded the movie and photos on mini dvd with handycam and ran mini dvd on my tecra M5 player, it worked very well.

  Now after 1 month, I have 5 mini DVD with movies and photos that I took for 1 month of vacation country of diffierent, I tried my best but tecra dvd player does not read these mini dvd, label appears instead dvd player cd player when I put the mini dvd in there.

  All the other standard size DVD, CD works good about it. Its complex and as well as irritating.

  Any suggestions?
  Why his messedup?

  Seems that the lens cannot read this miniDVD s. Maybe cannot calibrate the lens of the drive and the miniDVD is so illegible.
  Try the sascha. Maybe you are a lucky man, and it works.
  If this is not the case, try to remove the drive physically from the laptop. Restart the laptop without the drive. The BIOS and Windows shouldn't t recognizes the drive.
  Then stops again, put the drive in the notebook and the startup of the device.
  The laptop should recognize the drive and must indicate the firmware again.

  I don't know if this will help but it s attemptable m

• Why windows media player is not reading my DVD, and how do I install windows media player decoder using my drive from windows XP Professional?

  Media player from Windows

  Why windows media player is not reading my DVD, and how do I install the windows media player decoder using my disk of windows XP Professional

  FWIW... Win XP cannot natively recognize Commercial
  DVD video... it requires a DVD decoder. And... He
  is not a DVD decoder on your Win XP Pro drive.

  If you could play before commercial video DVD...
  do a system restore to a time before this started
  may be your solution.

  Or you could buy a DVD decoder at the following link:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Info about DVD decoders:
  Plug-ins for Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-Media-Player/plug-ins

  Or you can download and use one of the following freeware
  media players:

  VLC Media Player
  http://www.filehippo.com/download_vlc/
  (works on XP/Vista/7)

  Media Player Classic Home Cinema
  http://MajorGeeks.com/Media_Player_Classic_Home_Cinema_d6213.html
  (works on XP/Vista/7)

  Or... you can try to download and install one of the
  Following codec packs.

  (FWIW... it is always preferable, if you create a system restore
  point before installing any software or updates).

  * Proceed at your own risk *.

  (1) K-Lite Codec Pack (full)
  http://www.filehippo.com/download_klite_codec_pack/
  (Windows 2000 / XP / 2003 / Vista / Windows7 / XP64 / Vista64 / Windows7 64)

  (2) information on CCCP (combined Community Codec Pack)
  http://www.CCCP-project.NET/wiki/index.php?title=Main_Page
  (XP SP1 or more, Vista, Windows 7 - 32 bit - 64 bit)

  (3) Windows 7 Codec Pack
  http://download.CNET.com/Windows-7-Codec-Pack/3000-13632_4-10965840.html
  (2000/XP/2003/Vista/Server 2008 / 7)

  (4) Media Player Codec Pack
  http://www.mediaplayercodecpack.com/
  (Windows XP - Vista - 7)

  Good luck...

• Need expert help! CD player does not read the contents of the disc. Help!

  I searched and tried everything what we can imagine and impossible to find a solution. I can also restore because I don't really know this error at startup. Here are the symptoms and fixes I've tried. If there is someone out there who could help me it would be greatly appreciated!
  

  System:, I have XP w/SP3 installed. Dual-Core 3.0 G w / 3G P5N72T - MB Ram, HD 300 G, Asus CD/DVD Drive.

  Symptoms:

  • I had my CD player connected via PATA ribbon cable and my hard drive connected via a SATA cable.
  • My CD player will not autorun when an installation disc is installed.
  • My CD player will not read or display the contents of the disc when I use the file Explorer.
  • My letter of CD drive is D:\ and always appear as one of the discs.
  • When I use the command "run" and type: D:\install or D:\setup a windows "disk is not formatted" error appears stating "Windows is unable to read the disc. The disk might be corrupted or it could be in a form that is not compatible with windows.
  • My Green CD player will sweep on and I can hear it turn every time I try to explore the files or after I insert a disc, but she never autoruns, or displays content.
  • I decided to buy a new SATA CD drive and installed, unfortunately it does not work either exact problems remain.
  • I have two CD drives to another computer and they both work. So I know this isn't the disc or the lens.
  • I ran the utility Microsoft Fix It and she finds nothing wrong.
  • I ran the TweakUI to make safe autoplay features are on.
  • I did all the registry fixes proposed by microsoft and online forums. i.e. upper and lower, filters etc.
  • I removed the device from Device Manager and reinstalled.
  • I ran a virus, spyware, malware, and everything is clean.
  • I have the latest version of the system bios and all settings are fine. Most are on Auto that are associated with the detection.
  • Type of device DMA modes are selected in automatic detection.
  • If I could read a disc that I could try to reinstall windows XP, but it is not an option now until my CD player is fixed!
  • I don't have any installed like Nero buring CD software.
  • I actually installed Nero Light to see if it would read a disc, and of course I can see the disk and copy its content to my hard drive or take an image of the disk.
  • I tried to rename the drive, disconnect the drive.
  • I'm sure I tried other things, but can't remember right now!

  Thanks for your help in advance!
  Mike

  Hi msavage2000,

  It seems you have tried most of the steps to solve this problem. However, we would like to know if the drive does recognize the drive?

  As we know readers work, I would like you to try a new PATA/IDE cable and check the result.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• 2005 media center edition dvd player does not read Dvd

  My support 2005 Centre of dvd player will not play any Dvd code error indicates "can not read the dvd.

  Probably, it is because you do not have a compatible MPEG2 decoder installed.
  Could install you the Decoder Checkup Utility from MS, launch it and display the results?

  Kind regards
  Chris MS - MVP (Media Center) [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• CD player will not read CDs or DVDs

  error message reads: DLA does not support write - once media.  I've tried CDRW as well, player will not read or burn CDs or DVDs of any kind, the "fix - it" tool report indicates: "media in the CD/DVD drive is not readable." and "not fixed".  Ive tried several brands of CD and CD - RW.  Any suggestions on how to fix this?

  error message reads: DLA does not support write - once media.  I've tried CDRW as well, player will not read or burn CDs or DVDs of any kind, the "fix - it" tool report indicates: "media in the CD/DVD drive is not readable." and "not fixed".  Ive tried several brands of CD and CD - RW.  Any suggestions on how to fix this?

  ========================================
  The following article might be worth a visit, but it sounds
  as you may have a hardware problem with your optical drive.

  (314060) your CD or DVD drive is missing
  or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/314060/en-us
  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - to proceed at your own risk

• MY DVD - RW DVR-112D ATA DEVICE IS ONLY PLAYBACK DVD VIDEO (EX MOVIES). BUT NOT READ ANY OTHER TYPE (E.G. SOFTWARE).

  MY DVD - RW DVR-112D ATA DEVICE IS ONLY PLAYBACK DVD VIDEO (EX MOVIES). BUT NOT READ ANY OTHER TYPE (E.G. SOFTWARE). Everytime I put a dvd movie it plays automatically, but any other type of cd it will say insert disk. One has had this problem?

  Hello

  You have disk problem as the CD/DVD is actually 4 discs in 1 case (burn CD & DVD and CD and DVD read).
  Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Several good info here:
  http://Club.myce.com/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  ----------------------------------------------------------------------

  Step 1: Please make all underneath the same if you've done it before as it's often the total of the process which
  solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry entries
  that the troubleshooter does not, and those who "could" be the cause.

  Check with your system manufacturer Maker and device for possible firmware updates and the good
  Your player registry entries.

  Here are the keys in my opinion, are those in question - for the reader of CD/DVD subkeys of course that he will be
  other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even registry settings correct for your CD/DVD drive
  a person with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Satellite T130 - 10G: Firefox does not read any video or flash content more

  My Firefox does not read any video or flash content more. And in watching the news of repair troubleshooting/malfunction in Firefox under graphics, he said that "Direct2D activated" and 'WebGL Renderer' have been blocked because of the version of the graphics driver.

  I downloaded a new version on the Toshiba site, but an update of the driver can not find the new version.
  I had briefly solved the problem by installing the new driver from the file but it is not recognized in Device Manager.

  Automatic update through Windows just tells me that the driver is up-to-date.
  I have the Satellite T130 - 10G.

  Would be great if someone could help.

  Thank you!

  Hmmmm... as you know Toshiba doesn't support third party software so I think that your question has nothing to do with Toshiba directly.

  You find the same content with other browsers?

• Tecra M1 will not read any type of SD card

  Help!
  According to the title, my M1 will not read any type of SD card. I'm running the SP2 of XP reloaded from original floppies, and it is fully up-to-date with Windows Update.
  The little green light adjacent to the slot flashes briefly on the insertion of a card, but nothing happening for example no open option window and nothing visible in my computer.

  I downloaded the latest drivers and installed according to the directives of the readme.txt file and even thought to copy the SDDEVMGR.dll in the System32 folder.
  I obviously lack something, so any help or pointers are welcome.

  Thank you very much. Craig

  Hello

  Usually, books are not all sizes of SD card and so you should be sure that the used SD card is supported and compatible with the Tecra M1 card reader.

  But if you are using a compatible SD card the laptop should be able to read/write on the SD card.
  I try to remove the SD card in the Device Manager controller and remove the driver software malfunction. Restart the computer and install the latest drivers again.

  PS: A registry cleaning would be desirable. CCleaner is a great registry cleaning applications

• My dvd player will not read my disk of Windows 8 Pro upgrade

  Computer laptop Dell Vostro 1500 with XP Professional, my TSSTcorp L632H DVD player will not read my Windows 8 upgrade disk.

  It will read other DVDs. I've updated the firmware.

  The properties of the drive is display type as unknown file system CD player with blue disk image but used space and free space as 0.

  By using Device Manager, when I ask him to fill the volume is the disk CD 0, Type DVD, free media, not applicable Partition Style, capacity, space Unallocate status and placeholder show all 0.

  I also tried to use a separate USB TSSTcorp DVD drive and it will not also read the Windows8 disc.

  My desktop (Windows, 8, 1) DVD drive Asus computer reads the disc of Windows 8, but I can't use it to load Windows 8 on my laptop - or what I can?

  Can I connect my laptop to my desktop to upgrade laptop computer at Windows8 use of the desktop DVD player?

  I managed to copy the disc of Windows 8 on an external hard drive using another laptop that can play the DVD.

  Then I attached the external hard drive to my laptop and run Setup from there and installed Windows 8 to my old laptop to Windows XP...

  Thanks for your suggestion.

• CD player does not read the CD ROM and CD music, DVD works fine

  My HL-DT-ST DVDRAM GSA-H42N DVD and CD player does not read the CD ROM and CD music, DVD works fine

  Hi Anil,

  We recommend that you download and run the Microsoft Fix and check if the problem persists.
  See your CD drive or DVD drive is missing or is not recognized by Windows or other programs

  See also: http://support.microsoft.com/kb/321641

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Media Player 11 not Rip 'Any' CD.

  Windows Media Player 11 not Rip "Any" of my personal CDs to my library, Help!  See the below Error Message:

  (C:\DOCUME~1\Owner\LOCALS~1\Temp\db6b_appcompat.txt)

  Have tried all the fixes, start-run-delete files from media, Repopulate, etc stiil can not extract my CD in my music library.  Even some of my already torn will not play music files, just the same error message.  Same Uninstsalled WMP, then reinstalled, stiil don't Rip anything.

  AppName: wmplayer.exe AppVer: 11.0.5721.5145 ModName: ModVer indiv01.key: 11.0.6000.6324 Offset: 001087b 3

  Mr. Inzer, thank you for taking the time to try to help me.  Yes, I'm under XP PRO SP 3.  My Rip rate has always been set at 192kb.  However, I had to copy a CD, but will only rip to mp3 or WAV (lossless).  It will not yet be rip in "Any" of the Media Player parameters-Media Pro, Media lossless, etc..  I'm not the sharpest knife in the drawer, but I learn a lot with the help of people like you. Thank you.  I think I'm stuck extraction of all future CD to mp3 or WAV on my computer?  Thank you once again, RickJ41

  ====================================
  I do not know why you can not EXTRACT the .wma format.

  The following items may be worth a visit:

  Songs of RIP (copy) of a CD on your computer
  http://www.Microsoft.com/windows/windowsmedia/KnowledgeCenter/HOWTO/MP11/RIP.aspx
   
  Easy start for Windows Media Player 11 guide
  http://www.Microsoft.com/windows/windowsmedia/KnowledgeCenter/EasyStart/mp11guide.aspx
   
  Windows Media Player 11 tutorial: how your Audio CD ripper
  http://MP3.about.com/od/WindowsMediaPlayer/SS/WMP_ripcd_tut.htm

  John Inzer - MS - MVP - digital media experience

• CD player will not read vist CD when I try to upgrade XP

  Trying to upgrade from XP to vista CD player is not reading disc but reads the other disks

  Vista is on a DVD, not a CD.

  Your drive must be able to read the DVD.

  See you soon.

  Mick Murphy - Microsoft partner