My cityville stops, then freeze

Similar Questions

• FX6831-03 will not be able to start Windows. Just shows the gateway splash screen, then freezes

  My Gateway FX6831-03 will not be able to start Windows.  Just shows the gateway splash screen, then freezes.  OS is updated to current MS Win7-64 bit-w/all and virus/malware protection., Went over 4 days vacation, and when I tried to turn it on, it should display the gateway splash screen, then stop. can't hear anything that happens on the inside.

  Problem solved!  An external hard drive, powered by a separate power supply, was not turned on, but it was plugged into a USB port. When the computer "seen" this cross-town 'dead', he just stop - but no message appears problem.

  The good part?  Vaced out all the dust and replace the bios battery.  [I'm good for at least another 2 years;-]

• erratic cursor and then freeze it

  How can I get my cursor to STOP jumping around on the screen and then freeze it?

  It is on a desktop or laptop?... What kind of mouse is used?

  Can you confirm if the problem is occurring in a particular program?

  If you use a mouse running on battery, then please replace the batteries to see if that solves the problem.

  Also check the underside of the batttery for signs of debris (lint/dust) which could interfere with the infrared light... (kick across the box to remove dust)

  If you are using a laptop, that this problem can occur by accidentally touching the 'touchpad' area while typing?

  If you use a laptop go to the Control Panel on theStart menu and select mouse ... make changes to the sensitivity etc to see if that helps... you can use the icon for the "touchpad" found in the notification area to the bottom of the clock (lower right corner of the screen) often software called Synaptics is used... double-click on the icon to access the options and settings where some adjustments might help.

  It is possible that the video drivers must be updated and some kind of malware is the cause then be sure to check your pc with your AV program possible.

• Stops randomly freezes

  I am experiencing random stops and freezes when using the Internet, or when in a document. Also sometimes I get a boot error, Startup Repair tries to fix problem and fails.

  PAM

  Looks like you may have a virus or other malware. Get your updated antivirus program and boot into Safe Mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan in Safe Mode. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.

  -

  Microsoft has suggestions and offerings to

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

  -

  Moderator Forum Keith has a few suggestions along this line to

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

  -

  If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.

  -

  You can check the corrupted system files. Open an administrator command prompt and run SFC if the above does not help. Click START, and then type CMD in the search box, right-click on CMD. EXE and click run as administrator. Then, from the command prompt type sfc/scannow.

  -

  Finally if all else fails, you can look at the rather cryptic system event log. To do that click on start-> Control Panel-> administration-> event viewer tools. Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.

  `

  When you get your system in good working condition, I invite you to back up your system up to an external hard drive and make it regular periodic updates.

  -

  I hope this helps. Good luck.

• Satellite P20-761: Windows will not start - it loads agp.sys then freezes

  When I pass my laptop it starts with the Toshiba logo as if commissioning, but then the screen goes black with the following message:

  We apologize for the inconvenience, but windows did not start successfully. A recent hardware of software change might have caused this... etc etc.

  Then I have a list of options to choose from:

  Safe mode
  Safe mode with networking
  Safe mode with command prompt
  Last good known Configuration
  Start windows normally

  If I have the choice between the options of safe mode the screen goes through a list of files ending with: multi (0) disk (0) partition (1) \WINDOWS\System32\DRIVE.sys, then freezes.

  If I have the choice between the last two options simply, the screen goes black and nothing happens.

  Of I'm desperate is not to lose all the data that I have accumulated on the laptop. Stupid me not a not bother with backups.

  Discs only can I find supplied with the laptop are 'tools and utilities' and 'product recovery dvd - rom '. Seeing that I am not a technical interest, I'm afraid to try just in case I lose all my most important files.

  Help, please! Answers must be plain English as like I said I'm not really technical. Thank you. I cross my fingers.

  Sounds like something wrong with the graphics card or with the graphics driver.

  I think that you have no other choice than to use the Toshiba Recovery CD and attempt to reinstall the OS. I hope that the graphics card doesn t malfunctions.

  It's very sad, because in this case, you will lose the data on the HARD drive.
  Optionally, you can remove the HARD drive and then to connect to little via the USB port on the other computer, then you can make a backup of your data.

• Why windows live mail open then freeze!, must do alt ctrl delete to close

  Why windows live mail open and then freeze!, must do alt ctrl delete to close, done uninstall and reinstall anything will do, downloaded pc cleaner mircosoft

  suggestion, same answer.

  What could happen there? also tried opening without antivirus protection to see if it was to degree of protection it has not helped.

  Hello

  The question you have posted is better suited in the Windows Live community forums. Please visit the link below for any further assistance.
  http://windowslivehelp.com/product.aspx?ProductID=15

• MSN will not turn on it just says: upgrading, but the upgrade entirely custom install it... GETS about 58% then freezes

  MSN will not turn on it just says: upgrading, but the upgrade entirely custom install it... GETS about 58% then freezes

  Quote your full version of Windows (for example, WinXP SP3;) Vista 64 - bit SP2; Win7 RC. Win7) when you post in a forum or a newsgroup. Please do it in your next reply.

  Your problem has nothing to do with the Windows Update feature. Contact MSN Support. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I reinstalled the air combat Simulator 3 but he can't play. He gets at the beginning and then freezes. I've got shield deluxe antivirus 2009. He has not done this with the 2008 deluxe version of shield. Yet, I can play any other game.

  I reinstalled the air combat Simulator 3 but he can't play. He gets at the beginning and then freezes. I've got shield deluxe antivirus 2009. He has not done this with the 2008 deluxe version of shield. Yet, I can play any other game.

  Hi gullo56,

  Welcome to Microsoft Answers Community Forums.

  To help you better I would ask,

  a. If it functioned very well under Windows 7 before?

  ·         I suggest you to disable your firewall security software and check if you are able to play the game.

  From the link below, what I discovered is Microsoft Flight Simulator 3 is not completely compatible with Windows 7, but I would suggest that you follow the steps below to help troubleshoot your problem.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?type=software&s=combat%20flight%20simulator%203

  1. as Microsoft Combat Flight Simulator 3 is supported by Microsoft Windows Vista to function normally, I suggest you run this program in Vista compatibility mode in Microsoft Windows 7.

  For information about how to run a program in an earlier version of Windows, visit the link below,

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  2. you can also try to reduce the hardware acceleration and check if it solves your problem,

  1. Click Start-> Control Panel-> appearance and personalization.

  2. under customization, click on adjust the screen resolution.

  3. in the display settings dialog box, click the Advanced Settings button.

  4. in the monitor Properties dialog box, click the Troubleshooting tab.

  5. click on the change settings button.

  6. in the Security dialog box, click on continue.

  7 move the hardware acceleration slider to none to reduce or turn off video hardware acceleration.

  8. click on OK.

  9. restart Windows.

  Hope this information helped you.

  Kind regards

  Arona - Microsoft technical support engineer

  --------------------------------------------------------------------------------------

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Help the sims2 double deluxe loading and then freeze it!

  Recently I bought sims3 that plays very well, so I decided to get the sims2 double deluxe it will load but then freezes and the screen black, then tell does not.  I have Windows vista and the back of the box, it is said that it is running in windows vista.  Help, please.  I read one of the solutions was to delete your temporary files.  I'm not a computer person, so I'm afraid to remove or change anything.  I've updated drivers, changed to admin user and it compatible to windows xp pack 2.  HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!

  Hello

  Welcome to Windows Vista community responses.

  What are the minimum requirements required by the game.

  Windows Vista, XP, Me, 2000, or 98

  1.0 GHz or faster processor

  256 MB or more RAM (512 MB required for Windows Vista or running with several expansion packs installed)

  At least 5.5 GB of free space on the hard disk

  DirectX 9 compatible .0c map video with 32 MB or more memory (64 MB for Windows Vista) and one able to t & following chipsets: ATI Radeon 8500 or greater (9600 or greater required for Vista); NVIDIA GeForce 2GTS or more (GeForce 6200 or greater required for Vista)

  Card compatible DirectX 9 .0c.

  Make sure you have the graphics card that meets the above requirement.

  Uninstall and reinstall the updated drivers for your graphics card from the computer manufacturer's website or graphics card manufacturer's Web site.

  Uninstall the game and reinstall it back and check if you still face the same problem.

  Put your computer in a clean boot the game game and check if you are still having the same problem.

  To perform a clean boot on a computer that is running Windows Vista, follow these steps.

  1. click on start, type msconfig in the search box and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after starting the computer, reinstall and run the program and see if the problem is resolved.

  Search for previous issues. If your issue is resolved, follow the how to determine what is causing the problem section in KB article to narrow down the exact source.

  http://support.microsoft.com/kb/331796 .

  To restore your computer to a Normal startup mode, follow these steps.

  1. click on start in the box start the search.

  2. type msconfig and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  3. click on the general tab.

  4. click on Normal Startup - load all device drivers and services and then click OK.

  5. When you are prompted, click on restart to restart the computer

  I suggest also that contact the publishers of games for patches and updates on the game.

  Please let us know if you need additional assistance.

  Kind regards
  Anthony
  Microsoft technical support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• * Media Player stops. My drive stops, then recovers itself after a few seconds. Screen goes black for 1-3 seconds, BUT Audio continues!

  I have Vista Ultimate, but I'm not very smart PC!   When I try to watch a video clip, etc., SEE above EDIT.  My drive stops, then recovers itself after a few seconds.  Screen goes black for 1-3 seconds, BUT Audio continues!  Then Visual back for a while until that the same thing never happens again anywhere!  Also the FAN spins-up like a jet plane taking off!   Help, please.  Thank you.

  Hi Peter,.

  1 have had any changes made on the computer before the show?

  2. which media player you use to play the video?

  3. the problem occurs on all the video clips?

  I would say as update you the video card drivers and check if the problem persists:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  If the problem is not resolved, please respond with more information to help you best.

  Thank you.

• Vostro 200 Mini Tower trying to start, stops, then resumes

  Vostro 200 Mini Tower trying to start, stops, then repeats until you press the power button to interrupt the cycle.

  The power button is orange and fixed

  The blue disk activity light

  MOBO is lit

  All the fans (CPU, GPU, PSU, case) work

  Removed and reinstalled video card

  Deleted and reinstalled memory modules

  Power connectors to reinstalled MOBO

  Battery replaced CMOS

  All connectors are firmly connected, and yet there seems to be no power to the screen or keyboard.

  I disconnected the power, drained residual power and reconnected the power.  The cycle continues.

  I would appreciate any other suggestions on what I can try (as - why the screen and keyboard are not powered by the computer).

  Thank you.

  RJ318

  The power supply could be good, it is best to test with a unit of work "known."

  My thoughts are, interestingly, spend the money on a 9 +-system years?

  But you can buy a motherboard Dell refurbished/used OEM for $24.99 + S & H from here:

  https://www.Amazon.com/Dell-motherboard-Inspiron-systems-compatible/DP/B003CO0WQS

  Note: Unfortunately, while you can make an informed diagnosis, sometimes computer troubleshooting, is diagnosis by substitution.

  Bev.

• HP C4680 will not remove jobs at the end then freezes in queue on MAC with the Mavericks

  HP C4680 will not remove jobs at the end then freezes in queue on MAC with the Mavericks

  try to download the latest driver Package HP from Apple here:

  http://support.Apple.com/kb/DL907

  Install the package.

  Reset the printing system.  And add the printer with the new driver.

  Try to perform a "reset printing system" on the Macintosh and then reconnect to the printer.

  To reset the printing system do the following:

  1. open System Preferences
  2. click on Printers & Scanners
  3. right click or control click in the list box for the current print queues.
  4. Select the Reset printing system...
  5. enter admin user name and password
  6. restart the Macintosh
  7 try to set up the printer again

• hp7510 connected by USB for Win 7, "printer failure, 0xc19a0028.» "Stop, then press.

  When I turn the hp7510 installed yesterday, connected by USB for Win 7, I get "printer failure, 0xc19a0028.» "Stop, then press. Same error 6 times. How to fix?

  I turned on the printer, ignored the advice of "The printer failed" message to turn off, then on again. Then, with the sill of printer on, I reinstalled all the ink cartridges. The printer worked.

• How to stop a freeze on transition framing between two video clips?

  Hi all

  Newbiee here

  How to stop a freeze on transition framing between two video clips?

  Cheers for your help in advance.

  Make sure that your clips have long enough 'handles', extra material before and after the change, the less both the duration of the transition.

• Œuvres from VMWare for 20 seconds and then freezes for 5 seconds

  What is the problem with my VMware lately? It freezes up, then runs again for 20 seconds works for 20 seconds then 5 seconds, then freezes again for 5 seconds and? It's really annoying.

  
  Help!

  No, it's typical for the VMS version 6 of virtual and higher material.  Freezes most is either peripheral applications of diskette/CD-ROM or disk writes logging/debugging.