My computer has stopped booting upward - hangs when starting

Similar Questions

• Satellite l.660-106 with Windows 7 has stopped booting upward

  My l.660 was for a long time, yesterday, during which he downloaded the updates of Windows.

  This morning, it wouldn't boot. Unfortunately, I have not prepared recovery disc and do not have the disc of Windows 7 computer was purchased with the system pre-installed.

  What can I do to get it working again?

  Try please start the laptop with F8 on startup to enter advanced startup options. Start Notepad in safe mode and open the System Restore tool and try to roll back OS day or two back in the hope that this will help.

  If this isn't the case, send feedback.

• My computer has stopped downloading of updates due to an era 8007000 b. What does that mean?

  MY computer has stopped downloading of updates due to an era 8007000 b. What does that mean? Donald strickland

  Hello donaldstrickland,

  Thank you for using Microsoft answers Forums.

  Solution:

  Windows Update, Error 8007000 b

  If you receive the 8007000 b error when you try to install updates for Windows 7, the Windows file system transaction log is damaged. The transaction log is used by the Windows file system to recover when a file error occurs. To correct this error of update, you clear the log. Here's how:

  To clear the file system transaction log

  1. click on the Start button and in the search box, type command prompt.

  2. in the list of results, right-click Guest, and then click Run as administrator.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. at the command prompt, type the following command and press ENTER. (This command assumes that drive C is the drive where Windows 7 is installed. If Windows is installed on another drive, change the drive accordingly letter.)

  true fsutil resource setautoreset C:\

  4. you should see a message saying that the operation was completed successfully. If this is not the case, check your spelling and try again.

  5 Type Exit and press ENTER to close the administrator: command prompt.

  6. restart your computer.

  7. download and install the update again.

   

  That should solve the problem.
  

  
  Thank you.

   

  UDAY $012 please let me know that whether the solution worked or not, I thank you and appreciate your comments. URGO

• My computer has stopped recognizing my DVD burner.

  My computer has stopped recognizing my DVD burner. It will still read and write to a CD. I don't remember adding something new to the computer, but am not sure when it stopped to work with precision. The Device Manager shows his work; I tried updating the driver but it says that it is the most up to date; I uninstalled and reinstalled; I checked regedit and there are no filters; It is recognized in the BIOS. The store said it is not the hardware and you want to reformat the computer. What can I try before taking this step? Thank you.

  Hello Allisonjak,

  Thank you for your message.  You said try to update the drivers.  You go to the computer manufacturer's website and download/install the latest driver for your computer?  If this isn't the case, it is the recommended method for updating your drivers.
  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• My computer has stopped responding to the parameters in my power options tool.

  My computer has stopped responding to the parameters in my power options tool. "IE I settled on 'disable the monitor in 15 min', turn off hard drives in 20 minutes" and "mode standby in 25 minutes.  But it does not follow these parameters. He just continues to run.

  original title: Auto standby until the day before

  You can try to change the settings, see if they meet the new settings and then change back to your desired configuration.

  Please give some more information:

  brand and model of the pc

  current antivirus

  Operating system and service pack

  Also this system to be free of infections:

  Download, install, update and scan with these full free malware detection programs:

  Malwarebytes (MMFA): http://malwarebytes.org/

  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  http://www.Microsoft.com/security/scanner/en-us/default.aspx Security Scanner   

  After return with results and INFORMATION.

• My computer has stopped recognizing the HP7450 printer, although showing the connection to the USB "ready".

  My computer has stopped recognizing the printer plugged in usb port

  Hello

  ·        You are able to print a test page for your printer?

  You can try the suggestion given in the article below and check if that helps get the printer to work.

  http://support.Microsoft.com/kb/308028

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• "Gteko Brkr Svcs application has stopped working" error message when you try to connect to the computer

  When I connect I get this error "Gteko Brkr Svcs application has stopped working" my screen will become gray before all load.

  I can't find anything online about this.  Can someone help me?  Thank you!

  Hello

  1 did you changes to the software to the computer before the show?

  Start the computer in safe mode and check if the problem persists or not, if the question does not persist then perform the clean boot and check whether the problem is resolved or not.

  Was: start the computer in safe mode

  Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.

  Start your computer in SafeMode (Windows 7)

  B: Perform the clean boot and check if the problem is resolved or not.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Note: perform step 7 to reset the computer to start as usual after the boot process.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Hope that helps.

• My computer has re boots itself after that it was off for about 5 minutes

  Whenever I turn on my pc it has re boots itself after about 5 minutes, the standby icon is not highlighted more either.  Can anyone help?

  Do you mean that when you turn off your PC, it will turn on again automatically?

  I suggest you run a complete scan with:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  So what that it either detects and remove them.

  Also check your BIOS setting, this is one of the keys F (F1... F12), during startup it will say that one is it or you might have a look at your PC guide (it's different in each system depend on the model of BIOS) and check if it is set to start.

• Windows Explorer has stopped working error message when I access my folder of snaps

  Window #1:

  Explorer Windows has stopped working.

  Windows is looking for a solution.

  Option: Cancel box

  Window #2:

  Explorer Windows restarts.

  Option: Cancel box

  Come this error message when I try to access my folder only snaps.

  Please help me.

  Hello

  A few questions will help us better to solve your problem. Please answer these questions for us:

  1. what operating system do you use?

  2. what programs you have problems with?

  3. is there an error message generated?

  4. what type of file you go when this happens?

  5 How long this issue is past?

  6. is there anything changed/added/deleted before this issue popped up?

  It's basically the who, what, when, where and why of troubleshooting.

  Eddie B.

• Win XP Pro SP3 hangs when starting.

  My copy of close to ten years of Windows XP Pro served me well... it has been updated a number of pious UN time (and that was just the first few days after I first bought!) is the current state of the SP3.  I've never had a problem with the start of the BONE, until two days ago.  He simply refused to start.  There had not been updated, there had not been any virus, (Norton 360 first version 5, SpyBot Search and Destroy, AVG Security Suite Pro) full... it worked and works well, I stopped him and when I went to restart, it is hanging in the first screen of Windows XP (black one who lights up for a few seconds and scan blue dots everywhere under the name "Windows XP").

  I was able to restart in safe mode, no problem.  I then went through all the lists of things to try that I could find on here and any other support area of Microsoft.  Clean boot didn't work, start diagnosis does not work, no matter how configure msconfig, the result was the same. hang in the first XP screen.  I found an article that said to use the Windows installation disc and do a "set up"... essentially replace the operating system without affecting any of the other programs or data on the disk.  I did this, and of course, it still hangs on the first XP screen.  The kicker is NOW, I can start is no longer in safe mode, because it comes in saying that it is a 'NEW' XP installation and as such must be activated before first use... and because activation cannot be done in safe mode, please restart the computer in normal mode and proceed with the activation...

  IF I COULD START THE COMPUTER IN NORMAL MODE, I WOULD HAVE NOT HAD TO REINSTALL THE OPERATING SYSTEM AND SHOULD NOT ACTIVATE OR HERE BEGGING FOR HELP!

  Hi RonaldHaywood,

  It looks like the Windows XP installation is damaged and that the only option is to reinstall Windows XP on the computer after saving the data.

  You will need to take the computer to a store local tech to save data and then perform the clean installation.

  Install, reinstall, or uninstall Windows

  http://Windows.Microsoft.com/en-us/Windows/help/install-reinstall-uninstall

• System hangs when starting

  Someone had problems with t he laptop freezing on the screen of the Toshiba logo when starting? The only way to turn it off is to pull the battery, no other button works. Cannot, press F2 or F12 or button / stop. No response from either of them. After several attempts, the computer will boot. and run ok. Thinking it might be the motherboard or hard drive, but the two discover ok with diagnostics.

  Any thoughts would be welcome.
  Thank you
  Harvey

  My PSA has always been very helpful, but to be honest I didn't noticed this problem on my laptop.

  Generally if the laptop freezes during POST (power on self-test) then an error on the motherboard could be detected
  Eventually he s RAM related question
  If the RAM is faulty or malfunctioning, then the laptop could freezes

  Try an other Rams. Maybe it helps, if not, then a motherboard must be verified

• Premiere Pro CS6 hangs when starting

  I have install Adobe CS6 Master Suite. All the other programs I ran into this suite very well work. However, when I try to start Adobe Premiere Pro (either just the program or by double-clicking on a project), the program crashes before it can end the commissioning. I use Windows 7 Ultimate, that displays the message

  "Adobe Premiere Pro CS6 has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available. »

  I tried to uninstall and reinstall the program, which did not work. I also did the same with the sequel, which has worked for me yesterday, but today when I tried to start Premiere Pro, it broke again.

  I use an Alienware 14

  Intel i7-4910MQ 2.90 GHz

  16 GB memory

  64 bit

  I don't know what other information would be necessary to solve this problem. And I thank you for any help, as Adobe does apparently not care enough about their customers to provide support for their products.

  Update:

  I tried to install an earlier version of the Adobe Suite (CS5) after using the Adobe tool to clean all my system facilities. I met the same problem, I've never seen with this version. So, I guess it was something wrong with Windows. I was going to return my PC to its factory settings, but decided to first update to Windows 10. The update corrects the problem. Thus, there was apparently a problem with the installation of Windows, or possibly a program that changed the Windows somehow he couldn't run Adobe Premiere Pro. In any case, I am using it without problem with creating for a few days now, so the problem seems to be resolved. Thanks John Smith, to try to help me to troubleshoot this problem. I'll keep in mind that double graphics cards are likely to cause problems when I have problems in the future. I didn't know this before. See you soon.

• Photoshop cs5.1 hangs when starting

  My cs5.1 photoshop freezes in reading preferences when starting.  I've tried resetting preferences, did not work, tried a new installation, it freezes again... help?

  Solve problems of launch | CS6, CS5.5, CS5

• The sound on my computer has stopped working. I went into sounds to check and it seems fine. People can hear me when I'm on the video but I can't hear them.

  cannot get sound on my computer

  Hello Ancon,

  Thank you for your message.  Which application you use during your video chat?  Most likely, it is a wrong parameters, either on your end or the other person's computer.
  We can't wait to hear back on your part.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Hard drive on my computer has stopped reading all discs.

  Original title: cd driver problem

  We have windows vista, the hard drive works at all. We have tried to re install from windows thwe site, he says that we already had the best driver. What can we do?

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">