my computer says that I am not an administrator

Similar Questions

• I cannot perform certain functions because he says that I'm not an administrator, but it's my computer and I'm the only one who uses this computer__

  I cannot perform certain functions because he says that I'm not an administrator, but it's my computer and I'm the only person who uses this computer

  What are the functions? More global changes (changes to the system, software installation) require an elevation in Vista/Windows 7.

  Changes to the built-in Vista administrator account

  http://support.Microsoft.com/default.aspx?kbid=942956

  User - recommended configuration (Vista and Win7) accounts

  You absolutely don't want to have only one user account. As XP and all other Windows 7, Vista, and modern operating systems are operating systems multi-user with integrated system of accounts as default Administrator and comments. These accounts should be left alone because they are part of the structure of the operating system.

  In particular, you do not want account only one user with administrator privileges on Vista and Windows 7 because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult. It is not impossible to activate the built-in administrator to rescue things, but it may require more work you want to do. Better not to get into a bad situation at first.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. As a user Standard is recommended for security reasons and will help protect your computer against infections. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.

  If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this:

  Start Orb > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null). MS - MVP - Elephant Boy computers - don't panic!

• Computer says ADAM is allowed, authorization of the computer says that it is not!

  Cannot change the ID of the seller. Computer says ADAM is allowed, authorization of the computer says that it is not. Can't open four e-books!

  Please paste the capture of the error

• I know the process to change the MTU setting, but I'm stuck when I try to implement because it says that I am not the administrator.

  Original title: MTU settings

  I know the process to change the MTU setting, but I'm stuck when I try to implement because it says that I am not the administrator.

  I am running windows 7 home premium, service pack 1.

  I am the administrator in windows but not when I go to the C; \users\XXX > told me to click with the right button on command prompt and select run as administrator, but this option never comes.

  Hello

  Thank you for visiting Microsoft Community.

  I suggest you to post your query on our Forums TechNet social as this question should be better there.

  Please refer to the reference to the link below to send your request:

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking

  Hope this information helps.

  Thank you.

  Sincerely,

  Ankit Rajput

• I can't install service pack 3 for Win XP because my computer says that I am not allowed - see my administrator.

  I'm starting to load sp 3 and she's going through the installation but, by the end, a box appears that says that I'm not allowed and see my administrator.  It is a single computer; I sign as administrator (I even tried signature the administrator mode without failure).  SP 2 has been installed without any problems.   How can I solve this problem to install SP 3?

  I read somewhere that if this computer was used as a test for SP3 Beta site, it could be causes of the problem.  Does anyone know if this is true, and if so, how can I know if my computer has been used for the test.  I have no notes, but there is something in the back of my mind that says that several years ago, I sign up as a beta Test site.

  Hello

  1. have you downloaded the beta of Windows XP SP3 and installed version on the system?

  For more information about installing Windows XP SP3, see the link provided below.

  Steps to take before you install Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950717

• Cannot delete programs. Windows 7 says that I am not an administrator.

  I'm trying to delete a program in my laptop.  I am the only user of this laptop and its sole owner.  I get an error message that says that I can not remove the program because I am not an administrator.  It is doubly annoying because I'm unable to install a similar program that I really need to use because I can't remove this program (i.e., I can't install program verizon wireless because I can't uninstall Cricket).

  I have no need of several user accounts (more a user account account administrator) and will not be set up anything like that, no matter what Microsoft is necessary.  With my current setup, which is ONLY AN account with my name (and apparently not an 'administrator' account, whatever that means) how can I remove programs I didn't need?

  Hi DrJJ1967,

  You can try the steps below and check if the problem is resolved.

  First, you will need to disable all security software on your computer and check for the issue.

  Make sure that you re-enable the security program after reviewing the issue.

  Then try to start your computer with the default Administrator account and check the number to do that follow the steps provided below.

  Open the start menu, type lusrmgr.msc in the search line and press enter

  NOTE: this file is located in C:\Windows\System32\lusrmgr.msc

  a. open the User Manager and local groups.
  (b) in the left pane, click the users folder.
  c. in the middle pane, right click on administrator and click Properties.
  d. activate the account administrator of Buit-in-
  (a) clear the account is disabled box.
  (b) proceed to step 6.
  e. to disable the account administrator of Buit-in-
  (a) check the account is disabled box.
  f. click OK.
  g. close the window local users and groups.
  h. disconnect you, and you will now see the built-in Administrator account log additional icon (active) or removed (disabled) to the log on screen.

  NOTE: Click on the Administrator icon to open a session the built-in Administrator account.

  Now the steps provided above you must check if you are able to solve the problem,

  If you are able to resolve the problem with the default Administrator account, then you must follow the step provided to create a new user account and set the below corrupted user profile.

  Create a new user profile.

  Now you must create a new user account and check the question of do you need to follow the steps below.

  a. open user accounts by clicking the Start button.
  b. click Control Panel.
  c. click on user accounts.
  d. family Safety.
  e. click on user accounts.
  f. click on manage another account.
  g. If you are prompted for an administrator password or confirmation.
  h. type the password or provide confirmation.
  i. click on create a new account.
  j.Type the name you want to assign to the user account.
  k.Click an account type.
  l.Click create an account.

  Now search for the question.

  Follow the link provided below to fix the damaged user profile.
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• OfficeJet 4630: Says printer connected to the network, but computer says that it is not connected or idle

  I can't print to our hp officejet printer range 4630.  The printer says that it is connected to our home wireless network.  However, he said that it is inactive or not connected to the network on my mac.  The only way it will print sometimes is if I switch to a wireless network that is named the same as the printer.  AirPrint does not work.  We have a Linksys router.  Not sure if this is the problem or not.  I ran all kinds of diagnostic impressions on the printer and all say that it is connected.  I also tried to put the ip address into my web browser and it does not find the printer when it is connected to our home network.  Help, please!

  Thanks for trying my earlier recommendations. In my view, the problem you are experiencing may be with your wireless router. Normally, I would have you make sure that it is configured correctly, but you cannot access the built-in Web server.

  I want to try to set a static IP address, so we can try to get in the EWS. Please continue here: printer does not maintain the wireless connection

  A little luck? If you were able to set a static IP address, please try and access the built-in Web server. Follow the steps below:

  1. open EWS (use my earlier recommendations) printers

  2. go to the Network tab

  3. network protocols

  4. Select enable IPv4 ONLY

  Now with IPv4 enabled, you should be able to print wireless.

  If this isn't the case, you will need your router company to make sure that the multicast is enabled, Hello Protocol is enabled, mac filtering is disabled and ask them to check if there are updates the firmware for the router and the router's firewall check to make sure that it does not obstruct the communication

  The following ports are also used by your HP device and may need to be opened on your firewall configuration

  Incoming (UDP) ports are ports of destination on the computer while outgoing ports (TCP) are ports of destination on the HP device

  Incoming ports (UDP)

  137, 138, 161, 427

  Outbound ports (TCP)

  137, 139, 427, 9100, 9220, 9500

  The ports are used for the following functions:

  Print

  427, 137 161 UDP ports

  TCP port 9100

  Download of photo card

  137 138 427 UDP ports

  TCP 139

  Scanning

  427 UDP port

  TCP 9220, 9500

  Faxing

  427 UDP port

  TCP port 9220

  Installation of device HP

  427 UDP port

  Web Services

  80, 443, 5222 and 5223

  Any change? I appreciate your persistence!

• Computer said that I am not system administrator

  How can I take control of my own PC. System of administration think that I am not admin! This is ridiculas. Help! I can not even uninstall programs I have installed!

  How can I take control of my own PC. System of administration think that I am not admin! This is ridiculas. Help! I can not even uninstall programs I have installed!

  Hello

  From Vista, a normal Administrator role has changed.

  Administrator accounts run as standard user accounts. When you select an action that requires administrator privileges, you should see a UAC (User Account Control) window asking if you want to raise this action with your administrator privileges. Simply click continue on the popup and action should should run as administrator.

  Alternatively, an object a right-click and select the run as Administrator option.

  What is user account control?

  What are user account control settings?

  Principle of least privilege

  I hope this helps.

  Thank you for using Windows 7

  Ronnie Vernon MVP

• My computer says that I am not allowed to change the preferences of firefox so that I can stick on my site. Your instructions are too complicated! Help

  When I work on my site, a popup says I can't copy and paste. Your instructions are way to complicated. I need simple help to solve this problem. I prefer firefox over chrome, but this issue is so boring. I don't want to type on an entire page in my Web site just to overcome this problem.
  HELP HELP HELP. simple please!

  Use keyboard shortcuts if the buttons on the web page or other methods do not work.

  • Copy: Ctrl + C or Ctrl + insert (Mac: command + C)
  • Paste: Ctrl + V or shift + insert (Mac: command + V)
  • Cut: Ctrl + X or shift + delete (Mac: command + X)

• Trying to network Windows 7 and Windows XP computers, I get a message when you try to access the XP computer saying that I'm not allowed to access.

  original title: networking

  I am trying to connect 2 laptops via a netgear WiFi router. When you look at the network (in windows Explorer), I see the mobile xp on windows 7) but I get a message that I don't have permission to access.

  I checked the groups and even changed to be sure I was right.

  Checked all the boxes of distance that I could find,

  I even settle down as a user on the XP laptop.

  The remote control has all the laptops listed, but I am limited to connect to a XP Home addition. Can you help me

  Thanks Phil

  See the following topics:
  Networking home computers running different versions of Windows
  Make sure that you assign a static ip address to each computer in the same segment:

  192.168.0.1
  192.168.0.2
  192.168.0.3

  How to assign a static IP address in XP, Vista or Windows 7 - how ...

  On the computer running Windows XP, turn off simple file sharing:

  Open an Explorer window, click Tools > Folder Options > view tab

• Microsoft Update site says that I am not the administrator

  I'm the ONLY user/owner/manager on this laptop, when I go to the microsoft update page, it "scans to see if I have the harware appropriate" to use the site: then, he tells me I have to be logged on as administrator to use the site... I AM THE ADMINISTRATOR! How to fix this very odd situation?

  Vikingdad,
  Please post with the information requested here: what to post in the Windows Update forum
  Start with these troubleshooting steps and post returns with the requested info and arises from the troubleshooting.

  Clean boot your PC, and then run Windows Update.

  Reset the Windows Update components

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 - says that I am not connected to the internet when I am.

  Original title: why

  Why my computer says that I am not connected to the internet when I am and no web pages don't show because they say that I'm not connected

  You have McAfee? McAfee has been updated at the same time as the last batch of updates from Windows 7 and this is the cause of problems of internet connection for most, if not all, users of McAfee.

  See the communication from this "criticism" - McAfee

  Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

  You should make the fix McAfee, if necessary. There are corresponding communications for their enterprise products.

• My PC is always on auto repair at startup and when I try to change things that ot says that he is not administrator

  Hi guys,.

  My PC is always on auto repair, and when I try to change anything, it says that he is not an administrator on my PC. I really really need repair because I have an assignment due soon. Please help me!

  Hi Emily,.

  Thanks for posting in the Microsoft Community.

  I suggest you refer to the position of Justin Kostic, posted on October 29, 2012 and see if it helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-system/Windows-8-is-stuck-in-an-automatic-repair-loop/2310c795-d39b-460f-9e4c-c95008e5ce51

  Hope this information is useful, if not let us know with the updated status and we will be happy to help you further.

  Thank you.

• Computer to read DVD - one message says that I can not read the DVD, except that I have installed a new driver.

  I have a new Toshiba C650 laptop, and he says that I can not read the dvd on it except that I have installed a new driver. Is this true?

  Hi Bill,

  To be honest, this sounds ridiculous but if you get a message, I suppose it could be possible even if I find it incredible.  Do you have it in a (local or online) retail store or Toshiba?  By any chance did you upgrade from the DVD player when buying (where they may have accidentally neglected to update the drivers of the drive that was originally installed)?

  As it is new, Toshiba should help you with this.  Here's the contact page: http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/navShell.jsp?cf=su_contact&pf=true.  Give them everything they need to prove that buy you it and it should be under warranty and then give them the message Word for Word, that you have found.  They should be able to help you.  They can, for some reason I don't know, you don't need to help or guide you through a new driver installation.  I ask for a clear explanation of why this is necessary on a new computer and, if you are not satisfied with the response, ask them to consider that all the faulty computer and replace it.  Even if they won't, he needs the get them less motivated to solve your problem.

  I hope this helps.

  Good luck!

• my computer says that my nec dvd rw nd - 6650A is not attached to my computer

  my computer says that my nec dvd rw nd - 6650A is not attached to my computer. It has never been deleted so how can I fix this error?

  Hello

  1. What is the full error message you get?

  2. when the problem started?

  3. did you of recent changes on the system?

  You can read the following article and check if it helps.

  Your CD or DVD drive cannot read or write media