My dell 1520 very slow dvd burning

Similar Questions

• Portege R700 - slow DVD burning

  all of a sudden for some reason any CD/DVD burn on my new Portege R700 has almost ground to stop. It worked fine initially, but now won't have high peaks of 1 MB/sec... it is a REAL pain...

  The problem occurs with both the DVD player built-in and a USB connected drive that has worked well for years, so there must be a problem with o/s or H/S any. am about to update the BIOS but with no real hope

  I did some research on Google and things seem to point to the IDE controller issues. I took some advice and remove / reinstall the controller, but to no avail...

  someone else has the same problem - or, more importantly, a solution please?

  in some desparation

  Tim

  Hello

  not easy to say why it is burning so slow. have you tried burning with other discs and programs?

• Satellite 1800 plays very slow DVD

  My Satellite S1800 is very slow, trying to watch movies dvd, image and voice stucks and when you watch videos from youtube, the same thing.
  I just formatted my hard drive and reinstalled Windows XP and thinking that would help, but no, its always the same thing.

  What is the problem? My toshibas characteristics: 1 GHz, 256 RAM, 8 MB trident cyberblade ai1, 20 GB, I think that those who must roll a few dvd movies?

  Hello

  that you have correctly installed all the drivers for this machine? It's really important, because without the correct drivers you won´t be able to get the full potential of your material.

  The other thing is, it s always better (especially at these present times) to have a codecpack on the computer installed.

  Try this link and install a codecpack for having the latest codecs for video/audio files.

  www.free-codecs.com/download/K_Lite_Codec_Pack.htm

  Welcome them

• Satellite Pro P100-109 is very slow for burning a DVD

  Hello

  I'm trying to copy a DVD movie with the pre-installed software RecordNow! but it takes a lot of time.
  Something like 40 minutes to copy the DVD to the HD and more than an hour to burn the DVD-R.

  Can someone help me?

  Hello

  Do you want to copy the original DVD?
  These DVD is usually protected against copying and it's not easy to create a copy of this DVD.

  Furthermore the original DVD movies are larger than a DVD 4.7 GB common and, therefore, it of needed to reduce this film.

  Then wonder that you use the RecordNow! to copy a DVD movie.

  Google a bit and you should find more info and details how to reduce the original common DVD 4.7 GB movie

  Good bye

• Satellite Pro L20 - slow DVD burning speed

  Hi all

  I have a very annoying problem with my optical drive - he writes only CD at 6-8 x and DVD x 2! Nothing more! I have read several forums and it seems I'm not the only one with this problem. Only, it seems that there is no solution for this problem so far. The DVD multi drive is a Matsu * a 841 s UJ and its producer very has no support for this article at all. There is a firmware update available somewhere, I could find, but it only works for Vaio OEM.

  Again, I am only interested to release my drive from his normal abilities and not to unlock any area code or other kind. I just want to work to performance, I bought it, that's all.
  Can anyone help?
  Thanks to you all.

  Hi Cosmin

  You have this problem since the first day? Have you tried using different blank discs? Burning program you use? If you use for example 16 x max CD speed options are listed in the burning application?

• (Redirect) DELL XPS 8700, the dvd burner burn discs dual layer

  Hello

  I think of buying an XPS 8700, can someone tell me please, the dvd writer has to burn dvd discs dual layer (dvd9 8.5 GB) thanks in advance.

  Hi bigkevin,

  I don't know if this is the case. I'll have you repost this in the forum Office for a more expert opinion.

  http://en.community.Dell.com/support-forums/desktop/

• Very slow DVD recording on my Satellite M30

  Hello

  I have a satellite M30 with a burner DVD Teac dv-w28e. Engraving on takes (8 x) DVD 1 hour and a half to 4 GB, even if the burning program indicates the speed is 8 x and the estimated time is 10 minutes.
  So, what's the problem?

  Hello

  What burning program did you use?
  I prefer to use Nero burning utility. In my opinion, he is one of the best burning tools. You should check if you have this problem with other burning software.
  You simulate the burning process or did you burn the DVD without simulate?
  As far as I know that some programs simulate firstly the procedure of burning and having well simulate files will be burn on DVD. In this case, the burning process takes much more time.

  Good bye

• Slow DVD burning on Tecra A9

  I found that when burning DVDs my burner works about 1 X I have checked this on the web and found other forums, which suggests to make sure I'm set to DMA if available on the transfer mode.

  I have it on the "primary IDE channel" on device 0 transfer mode is set to DMA if available, but below in the "current transfer mode" box it says PIO mode.

  on device 1 the transfer mode is set to DMA if available, but the transfer current says modeit is not available.

  Help, please.

  Hello

  Have you tried deleting the IDE channels from Device Manager?
  Try this. Remove it, and then restart the laptop again!

  A friend of mine had a similar problem and the switching mode of the relocation back into DMA Device Manager.

  Good luck

• slow dvd burning

  I have a 1140i burner and it worked great for about a month, but has recently started to read and burn at 2 x max. It was read and burning at 16 x what can I do?

  Which, generally, but not alsways indicates that the drive in PIO instead of DMA mode.  You can use this tool to do it for you:

  http://SVP.co.UK/helpdesk/index.php?_m=downloads&_A=viewdownload&downloaditemid=15

  Or you can do it manually, see here:

  http://www.Digital-Digest.com/articles/check_set_dma_page1.html

  Just follow the directions.

• Satellite Pro A100 carpet * dvd uj - 841 s write at very slow speed

  Hello.

  The carpet * a dvd multi drive uj - 841 s that came with my satellite pro a100 written on very slow DVD. Firmware 1.50
  I use good philips and kodak media (both rated 16 X).

  now, I know that the drive is only rated at 8 X max. But I can't even reach 6 X.

  A firmware update would solve this?

  Thank you very much.

  Hello

  To my knowledge, some burning applications control the burning speed to obtain the best possible results from burning
  As you probably n t know the speed of combustion higher risk of burn errors
  I burn my DVD only using a single 1 x speed.

  Then I can be sure that all DVD players would be able to play the burned DVD.

  Greetings

• DVD burner in the new laptop VERY SLOW - PLDS DVD +-RW OF THE - 8A5HH

  I just got a new laptop from Best Buy - Dell Inspiron 3521. There a PLDS DVD +-RW OF THE - 8A5HH drive built in. I tried to burn a data CD, but it failed several times.

  I tried these in the file Explorer and CyberMedia Power2Go Burns, also at the Maximum speed or 24 X. It was using both Philips 52 X speed CDR burning failed at the end, when the burner is trying to close the disc. He couldn't complete a burn speed X 10 (very slow) to Power2Go. File Explorer strangled between 7 X and 10 x to be able to burn and did not show a dialog box saying if the burn is complete or not. He left me guessing.

  It was after a call to Dell technical support and a trip on the Microsoft Support Site to use their CD - RW test online. He said he updated something, but I don't know what.

  I must say it's a disappointment. I think I should have bought a laptop without a burner inside and bought an external burner. At least that way I had have the choice of what I got. This burner is slooowly.

  Anyone have any idea if this can be fixed, or is it just a limitation of the burner is in this laptop? If it is material, well I guess you get what you pay for.

  Dell phone support fixed it. Went to the Microsoft Support website and ran a convenience store of material for DVD players, who suggested the update of the firmware of the player. He did that, and then we went back and burned a disc in the file Explorer and it worked, but only to 10 X I opened Power2Go and burned a disc at 24 X, and it burned successfully. I didn't actually measure the speed (Power2Go shows you that), but it worked well and quickly. I think that the problem was an outdated firmware for the DVD/CD burner. Flashing to the latest firmware fixed the problem.

  I want, I knew that this troubleshooting tool on the Microsoft support site, but now I can not find.

  --

• M40-277: the laptop is very slow, during the writing of CD/DVD

  Hello

  I have a problem with my DVD writer. When I try to write a CD or DVD with my laptop, my laptop is very slow, I can barely move my mousepointer and my buffer State maintains have failed (see screenshots). Even when I try to play a CD or DVD it slows down my laptop. I don't know what the problem is. Can someone help me?

  I have this laptop: "Satellite M40-277" with the DVD-RAM UJ - 841S.
  Screenshots:
  http://users.skynet.be/fa027951/s1.jpg
  http://users.skynet.be/fa027951/s2.jpg
  http://users.skynet.be/fa027951/S3.jpg

  Thank you.

  Hi Gianni,

  I use Nero to burn DVDs, and one of the configurable options is the task of "priority". If I set it to 'high' then my phone behaves as you described, that is very slowly. Check if you have you encode/burn too high task priority.

  Kind regards

• Very slow start and run for Dell Inspiron 6400 XP times

  "I have a problem with an Inspiron 6400 brought to ' horribly slow start and run time.  XP Pro 32 bit SP3 patched up to date.  Cleaned up a lot of "undesirable", as the partially uninstalled programs, cleaned the files temporary etc. with CCleaner, cleaned and optimized the registry afer all the cleaning has been done, defragmented, tried to start without any of the boot files, disabled all unnecessary services and uninstalled virus checking software, (but ran several anti-virus controls) etc. - no help.   Safe Start Mode is faster, but... not at all normal - 1 1/2 minutes of screen to logon instead of close to 3 minutes.  A lot of memory (2 GB), which rises to 600 to 700 MB runnng all the stuff I've tried.  Hard drive is 1/3 used out of 120 GB with a 2 GB swap file.

  One thing I'm still scratching my head over - beyond the horribly slow boot - is very slow access to files even though everything seems to work normally, but as molasses in January.  Looking at the performance of the Task Manager tab when I run a copy of a file (whether via a cmd window or with Windows Explorer), I see a near max processor would be and the other with a small business.  Even if the customer says he had been getting worse for some time, after checking and cleaning of all things 'normal', my next thought was perhaps a bad disk or disk controller driver, but chkdsk ran very well (although it took hours) even if I ' d I have already updated all drivers (and even the DVD firmware and BIOS) on the Dell web site.  Oh, and I ran Dell Diagnostics (from bootable CD) updates all with no errors found.  And access to the slow file even with symptoms had max-processor occur with a copy of the file on a USB key that seems to eliminiate the hard disk, the disk controller and the pilot.

  The other interesting part of the display for a file copy task manager is that the processes tab simply shows System Idle 97 to 99%, with a percentage of casual for other processes as Explorer while I see 1 max out procesor on the performance tab.  That the same copy on your desktop shows 3-4% of the CPU usage and who is with active antivirus software.  I'm almost ready to fall toward a Windows reinstall, but would like to find the real reason behind this problem of puzzle...

  It of almost as if he's using PIO instead of DMA disk access, but... don't know how/where to test this.

  Look at:

  http://Windows-XP-tricks.com/direct-memory-access-DMA-on-IDE-hard-drive.php

  and

  http://winhlp.com/node/10

  Solved!   Thanks for the links, especially to each other.  An old but still a goodie!

  For those who have enquring spirits (and anyone else who stumbles across this thread), the primary IDE controller has been set to PIO and locked it.  Who would have thought that Windows slowly reduced the transfer speed, whenever he saw 6 errors on an IDE device until it has been reduced to PIO and then he locked it?  But the procedures described in the link of winhlp.com showed how to solve the problem.

  There are actually several problems that led to the final symptoms.  According to KB817472, the Atapi.sys has been improved in XP SP2 only degrade the speed of transfer on 6 consecutive errors instead of 6 cumulative errors.  And even though everything I have (Microsoft update) was seen and showed that this area was to SP3, I found that the driver for the controller layer IDE was the SP2 version.  Someone ran sfc previously perhaps?

  Oh, and I know now that the Task Manager process tab does not time processor kernal, but the performance tab.  Good to know...

  Thanks again to all who have responded.  Starting at the time of connection-question now is 40 seconds.   You'll love Untra DMA mode 5.   There is still a lingering question in my mind, since I've had the same symptoms of slow copy of a file on a flash drive.  Perhaps a link in some way to the way that Windows treats a flashdrive as a "drive"...

• Windows XP Version 2002 Media Center Edition Service Pack 3 running very slow on Dell desktop

  Very slow system Dell desktop for quite awhile.  It was "suggested" that the system is corrupt and OS reinstall may be necessary.  Cannot change system settings and make them 'hold', for example "show the hidden files and folders" under Display/Options files will not be applied.  Other things to try before wiping clean system and starting with delivery complete?

  Hello

  · What is the model number of the computer?

  · You receive an error message or error code when you try to change the system setting?

  · Do you remember all the recent changes on the computer before the show?

  · You have the Windows installation disk?

  1. to improve the performance of the question, try the steps listed in the links below: how to make a computer faster: 6 ways to speed up your PC: http://www.microsoft.com/atwork/maintenance/speed.aspx

  Slow PC? Optimize your computer for maximum performance: http://www.microsoft.com/athome/setup/optimize.aspx

  2. online virus scanner and check if any malware or virus detected on the computer activity. You can run the scan for viruses online from the link below: http://www.microsoft.com/security/scanner/en-us/default.aspx

  NOTE: Make sure that you select the correct version of the operating system before downloading the scanner)

• (Redirected) MY Dell vostro 1550 load very very slow?

  I use dell vostro 1550 including 2 years . Now I am facing this problem.

  My laptop support at very very slow . The charge rate was only 2.1 w. It will take 8 hours to recharge, the first 30 seconds it is in charge of 8.4w, then 6.2 w, then 5.1w in the end 2.1 w.

  May I know what is the normal rate of Watt

  The problem is that the charger it seems. But this problem started 2 days back (1.5.2014). before I never faced this issue.

  Can someone help me? Please

  As you have a laptop, better make this laptop in the computer Forum post here:

  http://en.community.Dell.com/support-forums/laptop/default.aspx

  Bev.