My Envy 100 kept losing the wireless settings

Similar Questions

• Router WNDR3400 wireless Port status showing does not the wireless settings

  Hi all

  Recently my SSID name is not recognized (2.4 and 5 GHZ). These had been configured manually. Looking at the Port of Wireless Router Status indicates that it is empty. I've reconfigured the Basic and wireless settings and I still don't see the SSID, etc. in the wireless Port. Example: The name (SSID) WirelessNet2G. In the wireless Port name (SSID) and any parameters are empty.

  It wasn't a problem until a week ago, when my wireless connections said "out of range".

  Thanks for any advice.

  Please close this post. Applies the settings default, and re-installed.

  Thank you

• ENVY 14-1190ea and the wireless installation

  I installed Windows 7 Pro x 64, and unfortunately I wasn't able to get the driver installed wireless lan.

  I downloaded and installed all necessary drivers on this page and is stuck with 2 damage which are the wireless adapter.

  The laptop is ENVY 14-1190ea.

  The hardware IDS that are not installed are:

  Network controller:
  PCI\VEN_14E4 & DEV_4353 & SUBSYS_1510103C & REV_01
  PCI\VEN_14E4 & DEV_4353 & SUBSYS_1510103C
  PCI\VEN_14E4 & DEV_4353 & CC_028000
  PCI\VEN_14E4 & DEV_4353 & CC_0280

  Unknown device:
  ACPI\HPQ0004
  * HPQ0004

  Advice me please how can I find and install the correct drivers.

  Hello:

  Try the quicklaunch for the ACPI0004 software:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-95237-1&LC=en&DLC=en&CC=US&OS=4063&Product=4313929&sw_lang=

  You are away from your wireless adapter: Broadcom 4313:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3688868&swItem=ob-90955-1&mode=4&IDX=1

  If the quicklaunch EHF software do not get rid of ACPI, try the HP Protectsmart driver:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&swItem=ob-76187-1&prodTypeId=321957&prodSeriesId=3688868

  Paul

• Impossible to manually configure the wireless settings.

  I have an Apple Time Capsule of 7.7.7 version and no matter what I do I can't seem to accept my manual settings wireless.  My building a House requires several APs to provide adequate coverage, and time Capsule keeps selecting wireless channels that are in conflict with other access points in the House.  Does anyone know of a work around that will allow me to force the desired channels? I use a Windows PC 10 with Airport Utility for Windows version 5.6.1 configure time Capsule. Here are the steps I followed:

  -Select the "Time Capsule" on the left side

  -Click on the "Manual Configuration" button at the bottom

  -Select the tab "wireless".

  -Radio mode - menu drop down select "802. 11A / n - 802. "11b / g ' (very intentional)

  -Radio channel selection - I select in the drop-down "manual."

  -Select 'change... '. "and choose"36"for the 5 GHz channel and '1' for channel 2.4 GHz, then 'Ok '.

  -Select "Update."

  After restarting the device, I check the settings and I find...

  -Radio mode is back 'automatic '.

  -Selection of the radio channel is 'Automatic' and channels do not necessarily match what I selected initially.

  Someone at - it advice?

  The main problem is that the version of the AirPort for Windows utility is not designed to work with 802.11ac airport base stations. Unfortunately, Apple has not updated this utility since Windows 7.

  The other problem is that Apple has "dumb - which crashed" AirPort Utility for Macs and the iOS devices with version 6.x. One of the things that he removed has the possibility to define patterns of radio and channels that "stick" to the 802.11ac base stations.

• get the status of 4500 printer wireless hp envy line after changing the wireless router.

  I use 8.1 window and I want to HP 4500-e printer all in one and all a works very well. My wireless router was going bad, so I replaced it. After the installation of the new router and get all my computers and devices (including the hp 4500 wireless printer) connected to the new network, I tried to print. The printer is waiting to print which was sent to her, but its status is set to offline mode. The box in the sign that says "set printer to run in offline mode" is not checked. but the status says HP ENVY 4500 SERIES (NETWORK) - in offline mode.  Anyone else has this problem and do you know how to solve this problem. I tried to turn off the computer and the printer and restarting their and running a hp Diagnostics program, but he says that everything works fine.

  Replacement of your wireless router try now.

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

• 5660 envy: envy 5660 disable the wireless SSID

  I have the printer connected via USB, do not have a Wi - Fi connection.  The printer always broadcasting a SSID, even though the wireless feature is set to OFF.  I looked on these forums and looked through the manual and nothing works to turn off the SSID of the printer braodcast.  How can I disable the SSID?

  Hi @divot71,

  Welcome to the HP Forums!

  I understand that you want to disable the SSID wireless with your printer HP Envy 5660. I'm happy to help you!

  If the wireless function is set to off, the only other function I can think. Is to disable direct wireless as well. According to this guide, printing with a Wi-Fi Direct, she says: most HP printers wireless released in late 2014 and later support Wi - Fi Direct. Printers compatible with touchscreen control panels have a Wi - Fi Direct icon (). If your printer control panel does not have the icon, go to the menu of the Network Configuration or the wireless settings and confirm if an item of menu Wi - Fi Direct is displayed.

  I hope that solves your problem!

  "Please click the Thumbs up icon below to thank me for having responded."

• Difficulties in getting the IPAD to find the printer HP Envy 100

  I was not able to get my Ipad 2 or 3 to print on the printer wireless HP Envy 100.

  The office and printer work together wireless, but not the IPADs. They search for printer but then say "not found".

  Any suggestions?

  Hey Tazdog. You use AirPrint for printing from or the app Home & Biz from HP? Make sure that Bluetooth is turned off on your devices. This can interfere with AirPrint. Also, what type of router are you using? Your router must support AirPrint Hello and multicast must be activated. If your not sure if it is able Hello informed me the model number and brand and I can check for you.

  See also Apple AirPrint Assistant here.

• HP Laserjet 200 M276 Color MFP: HP Laserjer 200 color than MFP M276 found on the wireless network

  Printer is connected to the wireless network, but cannot be seen by the computers on this network.

  The printer has been installed on my home network for 6 months and works well.  Now it is found on the network.  Power cycle the printer, and he started to work for one night.

  The day after the printer is found on the network by PC, running Windows or Mac 8.1 on the network (under Leopard through Yosemite.

  Reset printer settings by default, in the wireless network data and verified that it is on the network (wireless diagnostics confirm the network name, config, port and switch Diagnostics).  Still cannot be found on the wireless network.  I know that it is on the network, because it can access internet functions.

  Repeated configuration via USB for settings wireless program.  Receive error message indicating the wireless settings have been communicated successfully to the printer, but the printer is not found on the wireless network.

  Not cool.  Looks like I have yet another broken HP printer.  I don't know the process.  I called the warranty and they are sending me a refurb printer.

  Returned to the HP after 10 years.  Looks like it was a mistake.

  Hello

  Try restarting your router by unpluggin power for a while, let him 3 minutes to start and restart the printer.

  Click the icon on the printer wireless - what is the listed IP address?

  Can happen that the intellectual property of the Explorer of your computer?

  You can see any difference after the reboot of the router?

• Satellite P750 - 02K - how to enable the wireless interface?

  Hello

  I just bought a new laptop Satellite P750 / 02K with Windows 7 64 bit. How can I enable the wireless interface?

  I tried the Fn + F8, but it says it all, this is the 'wireless communication is disabled. Please activate the wireless communication switch. There is no switch that I see. The device driver is enabled and active. I even tried to reinstall the driver. The user manual makes no reference to a process physical either pass. I checked the BIOS but see no setting for all the wireless settings. I tried to restart the flash without result map.

  Any suggestions? Thank you.

  Hey Buddy,

  I Don t Satellite P750 in front of me, but the wireless network card is in the Device Manager?

  On Satellite P750, there is a tactile button between the screen and the keyboard to turn the WLAN function. The second button on the left (symbol of the antenna), you need to press to activate the WLAN.

  Also, check the BIOS. As I know most notebook contains an option for the WLAN that must be set to active.

• Want 5660 printer: 5660 envy may be wired and wireless?

  Hello

  I have a new Evny 5660 all-in-one printer and I was wondering if I can configure it to be wired and wireless. I inow have it configured to be wireless for two computers - it connects to my network and both computers can access. However, I was wondering if there was a way to add also a USB connection on my desktop so there is work computer to the printer when the wireless is not enabled. I don't always have the wireless and then I can not print from this computer, so it would be nice to have the opportunity to do both, if there is a way to do it.

  When you first install the printer, he used huge amounts of my posting of monthly wireless data, so I disabled (I hope) all updates and order options of connection so that it uses ONLY the wireless for my LAN connection - not to go out on the internet and download things by himself.

  For this reason I don't use it a lot or leave the wireless for more than the time required to print everything I print, and then I have to disable the wireless because I am not convinced that it it not again try to use a huge amount of data on its own. So the question on wireless and wired. I do not actually print a large part of my laptop and that you do not have the wireless on most of the time if she could also be connected via USB to my desktop computer.

  Thank you!

  AMT

  TNorth wrote:

  OK - as I thought, the manual does not make the printer wireless and wired. It tells how to pass Wireless USB, but not the other way around and also provides no information on the type of USB cable not required.

  In the section "Installation and printer software" on the computer itself, it only gives the option to add a new printer, or to change the wireless settings - nothing about adding a wired USB connection.

  Any help on how to do this very appreciated!

  AMT

  You need a USB cable from the printer.  Not just a USB cable standard.   Like this.

  http://www.Amazon.com/AmazonBasics-USB-2-0-cable--male/DP/B00BCWALHM/ref=sr_1_1?ie=UTF8&QID=1440363469&SR=8-1&keywords=printer+USB+cable

  You should just be able to run the installer and follow the prompts to connect the USB cable and it should work.

• Impossible to manually add the wireless network

  I need to manually add a wireless network to the laptop. When I click on add in the wireless connection properties window, however there is no pop-up window. If I try on a similar laptop windows wireless network properties appears. The Wireless Auto-Configuration service is started. How can I get the wireless network properties window?

  I was finally able to solve this problem and I posted the results on another forum, I used for this purpose.  Here is the text exactly as I posted on the other forum.  It answers some of your questions.
  Regarding other software that manages the wireless card, Yes, there are (Atheros), he was not managing the adapter (off a long time ago), however, to be sure, I removed it to run in the registry.

  Here is the text of how I solved the problem, I mentioned.  If you have more questions, feel free to post them.

  *****

  I am just posting this here because I could solve the problem and not able to find a reliable source on the internet on a fix for this and for a problem that is the result of my attempts to fix it.

  This is the situation and my landline.

  I was getting this error message

  "Impossible to migrate dependent packages.

  After trying to install a pacakage KB. It did not matter that one but they have been associated with the Wireless settings.

  I continued to try to install the newer packages.
  KB893357
  KB917021
  KB918997

  Each gave me the same message

  "Impossible to migrate dependent packages.

  I read online that I install KB937143 (update IE7) could help.

  I did this and still got the same message on dependent modules.
  I also had another problem occur.
  In the section my network places properties connection wireless adapters, whenever I clicked the Add button / PROPERTIES without window appears to allow me to change the settings, however, I was able to remove items from the preferred networks window.

  My Automatic Configuration Service wireless is running and took Windows to configure my wireless settings.

  I downloaded the updates for my driver Wlan (WiFiHP 500) and I still had the same problems.

  I restarted KB918997 using the/log option and read the log file. This is the last important lines:

  33.849: MigrateHotfix: hotfix migration KB937143
  34.129: migrating QFE KB937143 with command line: update.exe z q - B: sp2qfe
  36.783: failed 1603 Update.exe.
  36.793: MigrateHotfixes: KB937143 Migration failed
  36.793: DoInstallation: Migration failed
  36.933: failed to migrate dependent packages.
  39.597: message displayed to the user: cannot migrate dependent packages.

  I then uninstalled the KB937143 package and reinstalled KB918997 update with the newspaper of Pétion and he went along. I also tested the buttons add and PROPERTIES in the window of Favorites and those networks worked too.

  I checked the logfile KB918997 and he showed this:
  42.311: MigrateHotfix: hotfix migration KB932168 have
  42.511: migrating QFE KB932168 have with the command line: update.exe z q - B: sp2qfe
  88.768: MigrateHotfix: Hotfix KB932168 successfully migrated
  88.768: MigrateHotfixes: return code: 3010
  88.928: DoInstallation: Migration succeeded

  As a side note, I restarted the laptop frequently just to be sure.

  So, really, the option of running with the Ko log file helped me diagnose the problem.

• Problem with WRT 300N (V2) wireless settings

  Greetings,

  I just managed to reset the WRT 300N to default settings and have configured the connection internet etc and the network... BUT no matter how I fiddled with the wireless settings, I can not laptops or mobile phones to connect wirelessly to the network.

  The Windows software on laptops "finds" the router OK but for some reason any router seems unwilling to provide an IP address.

  I checked ALL the settings that I can think of, and all are correct... Well, all of them are exactly the same as my old router which worked perfectly.

  It's something that I think muxt be to do with security settings.

  Can anyone offer any suggestions?

  Thank you

  Hello

  Thanks for the input... However, I tried ALL of this and more... I now come to along to the belief that these routers with the so-called "n" (project) of function is not worth the money as I have serval new devices that are compatible and none of them can connect to any wireless function N... no matter who has network I try to use.

  I think that it is better to renounce that, until the system works correctly! Obviously, the current (and former) cr

• I can't seem to Windows wireless on Lenovo laptop to recognize a USB connection and turn on the wireless radio.

  I use a USB connection to my mobile phone for my internet connection. I want to use wireless mobile radio to connect other devices, but the window wireless services does not recognize that I am connected to the internet. What can I do here, gurus?

  Hello

  Please contact Microsoft Community.

  1 have you checked the State of the wireless autoconfiguration WLAN service in the services window?
  2. do you have any security software installed on the computer?
  3. have you made changes on the computer recently?
   
  We will first try to manually start the wireless service, i.e. the WLAN AutoConfig service. To do this, connect to the computer as an administrator.
  1. Click Start, type services.msc and press to enter.
  2. Locate the autoconfiguration WLAN service, double-click to open its properties window.
  3. on the general tab, change the startup type to automatic and click on the Start button.
  4. click on apply, then ok.
   
  Try to connect to the wireless connection and check the result.
   
  If the service still does not start, run the System File Checker tool to scan the computer for the corrupt system files and automatically correct. To run a sfc scan, try the steps mentioned in this link: http://support.microsoft.com/kb/929833
   
  For more information on the wireless settings, see this link: http://technet.microsoft.com/en-us/library/bb878035.aspx
   
  Let us know the result of the above troubleshooting steps so that we can discuss in detail and help you further.

  If the problem persists, proceed from the link below to fix this problem

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-81&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Reply to the post with an up-to-date report of the issue so that we can help you further.

• C4780 cannot find the wireless router

  I have a new iMac and old Toshiba that is running Windows XP and you use a Netgear wireless router.  When I got to the printer, it worked fine on the wireless network.  Bought a new router that I couldn't work with the Mac and the PC so I returned to my original router.  Now, the printer does not work as a wireless printer.  Summaries of diagnosis indicates that the printer cannot find the wireless router and fails under "Network Name (SSID) Found."  On the Network Setup page, my network is listed as a network discovered by the printer.  I guess there is a simple solution and hope to find the answers here.

  Thank you very much!

  Some printers C4780 left the factory with a default misconfiguration.  This could be the reason why you can not see the hpsetup network.  Here is an updated set of instructions for manually adding the C4780 to a Mac:

  Part 1 - Get the printer in Ad-Hoc Mode Wireless

  (1) turn on the printer.

  (2) display the printer has six keys; three on the left (top-left, middle left, below on the left) and three on the right (top-right, centre-right, bottom-right).  Press and release the following touch buttons in order:

  top left,

  bottom-left,

  top left,

  top left.

  (3) you should see the internal menu of printers.  Press the right button down to select 'Service Menu'.  Press OK (lower-left).

  4) press the lower button right until you see "Reset Menu".  Press OK (lower-left).

  5) press the lower button right until you see "half full".  Press OK (lower-left).

  (6) after a few seconds, the printer turns off.  Press the power button to turn on the printer.  It is now reset with the correct default network settings.

  (7) turn on the radio:

  Press the Scan button to get the wireless settings

  Select wireless Menu

  Select wireless settings

  Select Enable Wireless to turn on the radio.

  Part 2 - run the Wireless Setup Wizard

  The printer has now created an ad - hoc network called hpsetup.  To connect to this network on your Mac.

  Check the connection to the printer by opening the printer's internal web page.  You can do this by opening Safari, select bookmarks then ShowAll bookmarks.  On the left pane of Safari, select Hello and on the right, you should see your printer listed.  Double-click your printer and Safari should display the printer's internal web page.

  The printer Web page, select the network tab, and then select Wireless (802.11).  Now press Start the wizard to launch the wireless configuration wizard.

  When the wizard is finished, your computer unplug the printer's ad - hoc network as the printer reconfigures itself to connect to your network home.

  Reconnect your computer to your home network.  Verify that you can connect to the printer at the opening of its internal web page again once we were doing before.

  Finally, install the printer SW.  Since you have Snow Leopard, you don't need the CD that came with the printer.  Instead, open the Print & Fax under System Preferences applet and press the [+] button.  Highlight your printer and click Add.

• HP-Envy 100 D410a just shows (INITIALIZE) is on the screen!

  HP-Envy 100 D410a was printing then stopped. When I turned it back on, just shows the printer (INITIALIZE) is on the screen! It was after I left the power for hours. Can't do anything to the screen.  My firmware Version is: SLM1CN1039FR

  Hello

  If your printer is connected wireless, make sure temporary connect the USB device, and then follow the patch below:

  Windows:

  http://ftp.HP.com/pub/softlib/software12/COL37748/MP-92513-1/D410Envy_FWUpdate_4684_HPCOM_x86_v2.exe

  Macintosh:

  http://FTP.HP.com/pub/softlib/software12/COL37909/MP-92884-2/HP_Firmware_Updater.dmg

  Please let me know if this is useful,

  Shlomi