My flash won't pop up

Similar Questions

• Fill the cartridges of ink on deskjet 9800. Red light flashing, won't print. Always worked before.

  Your Question: I haven't found new, original HP cartridges for my deskjet 9800 in any store. I so did my ink on deskjet 9800 as I did with success several times in the past. Two red lights keep flashing. It won't print. [Someone suggested that I need a new print head?] What should do? thanx

  The coding strip only should be cleaned if there is a problem - it is very fragile and can be damaged, making the printer inoperable.  There is a post here that describes how do to clean the MICR band, but respect the warnings and don't do it unless necessary.  There is also a post here that shows how to solve one of the problems mishandling can cause.  Do not clean the Strip unless necessary.

  The coding is the band one located just behind the stem of transport semi-claire. It aims to help the print cartridge faithfully keep track of its position as it moves along the stem of transport. Sometimes dust, ink or oil can accumulate on this strip and cause the following problems:

  • Prints "stairs" to the bottom of the left margin of the self-test page.
  • The margins left or right of the self-test are not properly placed.
  • Ink cartridges carriage slams on the left side of the printer.
  • Automatic test double-print or obscured shows the letters.
  • Defects to flow the length of a printed page (portrait orientation), or on the whole page (landscape orientation).
  • Printing stops and the lights of the Control Panel on the printer indicate an error.
  • Gaps appear in the printed text or images.
  • Slow printing

  CAUTION:

  Do not clean the strip of coding for the following symptoms: media pick questions, paper jam tilt, ink cartridge, missing points or rejection white stripes with printing and smeared or streaked black ink.

   

• HP DeskJet 460 - lights flashing, won't print

  
  

  Hi warringtonsaint,

  Remove the cartridges from the printer, then check again there is no little pieces of paper in the printer. Turn the printer off for 1-2 minutes and then turn it back on. I would like to know if you still have the same blinking lights without the cartridges installed?

  Flashing lights

• Toshiba Flash Cards keeps popping up on the Satellite A135-S2286

  Hello

  I have a Toshiba Satellite A135-S2286 and I get a grey bar at the top that says Toshiba Flash Cards?

  How can I get rid of it for good?

  If you want you can disable it.

  Check the programs-> Toshiba-> Toshiba Flash Card Utility.
  There you should find an option to turn off the feature of Flashcard.

  Welcome them

• Flash won't install - Hello, Adobe, you're listening?

  I'm out of Yosemite 10.10.2 and cannot install the Flash plug-in v.17 on my Macbook Pro. Like many of those who have already posted, I get a General Setup error and the installation fails. As far as I know, the only solution that was displayed works in some cases, but not in all cases. This solution is to download the full install version, remove older versions of the plugin, do a cleaning of the general system, restart and then installing the new Flash Player. I do not plan to follow this process because I don't want to remove my plug-in current. I saw the messages of others who did this and now have Flash Player at all and can not install even previous versions of the plug-in. Why in the world Adobe would release an update that does not work? No not Adobe thinks it would be a good idea to test the new version with Yosemite before releasing? Or they laugh? The messages I've seen Adobe staff have been completely useless and even contradictory. It's inexcusable. I wish that the developers would adopt an alternative to Flash, because this program is nothing else that a headache hogging memory, and now he moved not even. What a joke.

  I had the same problem, but when I disabled my avast anti-virus, I could install

• Why Flash won't run and save?

  How can I get flash player to run and save?

  Flash Player Help. Installation problems | Mac OS

  Flash Player Help. Installation problems | Windows

  Mylenium

• When importing a flash animation in captivate flash won't call external files

  Is there a way to import flash into captivate and it still be able to call external files (ie. xml sound or video)? When I import a flash in captivate it will not call any external file.

  Just for the follow-up of this. I got files from Marcus on the email and the problem is that the Flash file using ActionScript 3 (AS3) and Captivate 3 doesn't support the Flash AS3 files.

  That's why it would work as expected.

  / Michael

  Click here to visit the blog of www.captivate4.com

• Buttons in Flash won't open links or files in the empty windows in IE 7!

  I have a bunch of flash files on my site that I use in the form of menus. Some of these menus have buttons call files and links to open in a blank window, but it doesn't seem to work in Internet Explorer 7. There are fixes to this problem?

  I have actually reset the features of IE in the Advanced tab and that seemed to fix it.

• After that restart of firefox does not start. is running in the Task Manager, but won't pop up. Reset safe mode and uninstall/reinstall won't help. OK so no reset.

  Win7 Pro. has worked ok firefox. but lately with 25 and 26 now, firefox does not start. I see that firefox is running in the Task Manager. but it will not just appear.
  If I still download and install it, it runs, but every time I restarted the system, it just does not work yet.
  Reset try:, safe mode, uninstall & reinstall, new/clean profile none of these work.

  
  

• OfficeJet j6480 flashing, won't print, will not be closed

  OfficeJet J6480 is stuck on the stop, but it never does. If I hold the power button down a notice comes up saying "power save mode: completely stop." I can't turn it off, and the statement said never disconnect if the unit is plugged. I removed from the list of printers and reinstalled. Manual does not recognize problem. The printer says window: network host "HP419624local is busy, try again in 20 seconds... printer busy.

  HP customer service does not care and does not respond. Either I have to solve the problem or throw old printer for five months. Anyone can save him for me?

  Janet,

  First of all, the printer is not designed to be turned on and off remotely.

  Secondly, if you would like to try an experiment for me, we can get to the bottom of this:

  Stop all your computers before you try to stop the printer using the power button.

• Get slaves 600EX-RT to fire only via the pop-up Flash

  I have a set up as slave and controlled by the 60 d 600EX-RT using the pop-up flash.  I have the 60 d settings for the slave to fire single pages 140 and 141 of the 60 d manual.  However, in this context the pop-up flash fires again.  At the end of page 141, he said "even if you disable the built-in flash of firing, it is always light to control the slave unit".  Is there no way to disable the pop-up flashing?  Otherwise you never truly unique off-camera flash.  Thank you.

  Is there no way to disable the pop-up flashing?  Otherwise you never truly unique off-camera flash.  Thank you.

  No, if you want to trigger a slave camera because it uses the pop-up flash as the triggering of the slave device.

  Yes, you get unique off-camera Flash because although pop-up flashes, it's only a pre-flash to trigger the slave.  In this configuration, that the pop-up does not contribute to the actual exposure, all this happens before the opening of the shutter.

• EOS 50 d, Flash problems

  I tried to take a picture that required the use of a flash. Him build-in flash "should have" popped up, but it did not. I couldn't, electronically via the flash button, do come. After going to the 'Flash' settings, under '' integrated '' I got the message "cannot display this menu. External Flash is attached. "Under"External Flash", I got"unable to display this menu. Not compatible flash or the flash output is off. «The last message was posted under the flash settings external and «Clear flash ext...» "I erased all settings of the camera, deleted/replaced battery, changed the battery to an another one (to the authentic times) and nothing fixed the problem.
  I tried to raise the flash with my fingers but I'm afraid I'll break anything by doing this.
  I rarely use flash anyway, but the only time where I wanted...

  Any help would be greatly appreciated!

  Firmware: Version 1.0.9

  This unit has never had an external flash attached, via the hot shoe or PC terminal.

  If it indicates that the external flash is attached to what it means is that the sensor in the hot shoe is probably stuck.

  The shoe shot has two "rails" hold an external flash and each rail has a "spring blades.  Use a toothpick (or something that is used to scratch the camera) and * carefully * lift springs.  On one of them, you will see a small button (probably black).  It is a 'micro switch '.   When you drag in a Flash, this button is depressed, and that's how the camera knows that you have attached an external flash (in which case she will not try to use the internal flash.)

  These micro-switches can (and obviously do) become 'glued' anytime.  Shake the micro-switch with the toothpick and it probably just "pop up" for you.  If you want, remove the battery from the camera and then pick up a drop of denatured alcohol and drop it on the switch to help dissolve anything that might be what actually stick.  Do not use any type of oil (oil just will help collect more dust and it erases everything.)  The alcohol evaporates so you won't have anything left out Gummy.  You probably won't have the alcohol, but if the switch is not free pop up, then it would be one of the ways.

• Video Flash and flicker on the websites Gifv

  Since the upgrade to Sierra, I noticed a strange problem. Video on Facebook and Youtube Embedded flash flashes quickly.  I noticed in Google Chrome and Safari. I've upgraded to the latest Chrome and the latest version of flash player for both browsers. This happens when watching an animated GIF as well encoded as GIFV.

  FWIW, YouTube uses HTML5 for quite some time, so flash won't have anything to do with it. Chrome has built-in flash so there's no need to download flash to Chrome.

  I'm not on Facebook so I can't comment on that. I don't know where I can test a GIFV and I don't know why she would need flash.

• Want x 360 M6 keyboard doesn't pop up in tablet mode

  I just got a renewed desire x 360 and the keyboard won't pop up in tablet mode, but the regular computer keyboard laptop mode works very well. Is there a button I'm missing?

  Sherri Hello,

  You use Windows 8.1 or 10?

  In tablet mode, touch and hold an empty area of the taskbar.

  In the pop-up window, press the show the touch keyboard button to put a check mark next to it.

  If you don't get the keyboard to appear automatically as needed, you can call the keyboard by pressing the keyboard now.

  Does that help?

• transfer movies to the flash drive

  I downloaded the six Star Wars movies and that you do not have enough space on my Air.  I am told that I can transfer the movies on a flash drive and pop the stick in the Air to play.

  I bought a 128 g flash drive and when I try to drag and drop, I get the message that there is not enough space on the handle, although there is nothing else on the stick.  What I'm missing or doing wrong?

  I have to drag items to drive flash (formatted in BOLD) all the time and have no problem, but then I use an older version of iTunes and the operating system.  Maybe the drive is locked or is simple bad. What happens if you copy files to it from the Finder?