Tiara closes 10 sec after start without warning

ERROR:

Tiara closes 10 sec after start without warning

VERSIONS USED:

DIAdem Version 8.00.981 and
Measurment OR & Automation Explorer Version 4.5.0f0

Pay ATTENTION to the DEM_ERRS.001 (German version):
1 * Fehlerregistrierung'm TT. MM YYYY um hh: mmS [Meldungsdatei:COMMON / Textarea:13 / Textnummer:1]
Objekt "tc1" unbekannt oder nicht offen.

FIX:

disable the windows service: "NI Configuration Manager.

Thanks for your replies!

I have now uninstalled all new driver DAQ (mx) and installed the Driver Traditional NOR-DAQ 6.9.3 (including MAX 2.2.0.3010) and DIAdem 8.0 works very well.

Tags: NI Software

Similar Questions

  • MacBook does not start without warning, please help I'm losing my mind

    MacBook pro froze performs a simple operation. Got the wheel turns and could not enter the finder, etc. Did a hard reboot. Now the computer does not start. I get the apple journal and the bar for a minute or two and then a zero symbol IE forbidden - a circle with a line through it.

    Surprisingly, it is less than two months after a similar disaster where the computer would not suddenly start. In this case, I was able to get repaired the program apple logic board (the problem was compatible with the congenital fail GPU result).

    Incredibly this time the macbook seems to be in even worse shape. I don't get anything useful from the startup keys.

    cmd R - take me in a gray screen no symbol

    D - no symbol grey screen

    option D - it took a while but eventually I got to choose the network, then it seemed to freeze on the globe

    option - strangely this brings me to a screen asking me to choose the wireless network, but it does not all networks in the box. weird - this happens even with a simple bootable usb key

    option cmd R - annoys me to the world, but the world does not revolve

    T - puts me the screen of the target disk, but the disk is unreadable from another computer

    cmd S / cmd V - gives me a code screen and then freezes

    Shift - takes me to zero cross again

    C - think for awhile, but let me on an undefined gray screen

    (I need some advice on the start-up of the thumb. Pressing C should force the startup of the thumb. I did an inch bootable with el capitan. However, I am not convinced that my thumb works on a functional mac either - I just can't get a macbook functional 2009 to start the boost by pressing C, although it starts from the thumb if I press option and go through the menu. Weird.)

    Help, please. Urgent need to use the computer and access the data on it.

    Even if you have just a few ideas that would be useful.

    Can I assume that you have a 2009 MBP?

    You have your data backed up?

    Have you tried SMC and NVRAM resets?

    https://support.Apple.com/en-us/HT201295

    https://support.Apple.com/en-us/HT204063

    Have you tried a secure boot?

    https://support.Apple.com/en-us/HT201262

    Take our installation disc and use the one with the Apple Hardware Test instructions on it and run the original test.

    Note that an error free AHT is inconclusive.

    Ciao

  • a kind of automatic update suddenly without warning started to close all the documents I was working on, rebooted and lost all the changes I had made in the past three hours

    I've worked hard for three hours in the middle of the night, made extremely dfficult work on several Word documents and Excel spreadsheets. at the same time - the kind of work that you can do if you're sure not not to be interrupted. All of a sudden a few (probably Windows) update began to close the files one by one, "don't turn off your computer" was the message.
    I waited. It restarts, but then I realized all of work my three hours had disappeared. The files are still there, but in their unchanged form. How is it you lose nothing if your battery runs out and you can restore the files, that you deliberately deleted, and there is a permanent record of each tiny websearch? However, Windows can come in the night and boldly to destroy three hours of irreplaceable forced labor without warning! I won't ever be able to replace it.

    Set the automatic update process so that you can control if the updates to download and install.

    And, as a general rule, always save files regularly while you work.

    HOW to: Configure and use automatic updates in Windows XP
    http://support.Microsoft.com/kb/306525

    How to configure automatic updates by using Group Policy or of registry settings
    http://support.Microsoft.com/kb/328010

    for Vista: http://windows.microsoft.com/en-us/windows-vista/Change-how-Windows-installs-or-notifies-you-about-updates

    for Windows 7: http://windows.microsoft.com/en-AU/windows7/Change-how-Windows-installs-or-notifies-you-about-updates

    Take control, adjust your settings in THE and save your work as you go along.

    TaurArian [MVP] 2005-2010 - Update Services

  • Vista close without warning

    Lately my pc has been randomly close without warning.  It doesn't seem to be compatible on when he decided to "shut down".  I noticed that if I turn it on and just leave, so it seems that the time it takes to turn off is shorter.  But the time intervals are different each time.  If I turn it on and use a heavy application immediately (like Need for Speed) and it remains on 90% of the time without problem.  I tried a number of analyses of virus and so far nothing has much turned upward.  I checked my hardware and all is well.  There is a problem in the windows registry, virus, or vista is just corrupt.

    I am running:
    Vista Business SP2
    3 GB ram
    3.0 ghz AMD Athlon 2 x
    NVIDIA 9500 GT graphics card
    PC Chips motherboard
    80 GB HD (hard drive was free, hoping to get a much bigger VERY soon)
    Hello
     
    1. don't you make changes before the show?
     
    This happens usually if the program or device driver is defective.
     
    Step 1: to find out what is causing the problem, check the event logs to find out what is causing the problem.
    http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer
     
    You can try the following steps to keep your system up to date, as it has sometimes solves the problem.
     
    Step 2: we recommend updating all drivers for devices on the computer and install the latest updates of windows for better functionality.
    To update the device driver, try the following steps.
    1. click on start, type devmgmt.msc and press to enter.
    2 to the list of issues, do a right-click on the following and click on update driver.
    a. graphics cards.
    b. the network cards.
    c. Chipset driver.
    3. If prompted, restart the computer and follow the same steps for updating other drivers.

    Step 3: check in safe mode.
    If the problem does not persist in safemode, it then confirms that some programs not Microsoft is causing this issue.
    Visit this link to start the computer in safe mode: http://windows.microsoft.com/en-US/windows-vista/Start-your-computer-in-safe-mode
     
    If the problem persists, check the logs of events and after return details, so that we can help you further.
     
    I hope this helps.
     
    Kind regards
    Syed
    Answers from Microsoft supports the engineer.
  • My gateway Tablet close without warning. Now more trouble...

    My Gateway Tablet PC with windows XP stops without warning a few days ago. Now when I try to start, it doesn't do anything (the screen is black, fan works, power and light is on), it will start up, I log on, and then it crashes after a few minutes, or the screen goes black (power light always). I managed to make it work yesterday, and I ran the Microsoft Saftey Scanner. He came clean. I keep reading on overheating which could cause this, but I don't think that's it. The fan seems to work very well, and it does not start or stops immediately after 2 days of course stop. It worked fine before all this, what's wrong? Help, please!

    Hi Bmjohnso9192,

    ·         You receive an error message or error code?

    ·         Did you do changes on the computer before the show?

    Follow the suggestions below for a possible solution:

    Method 1: Try the SFC (System File Checker) scan on the computer.

    To run the System File Checker tool, follow these steps:

    a. click Start and click run, then type cmd in the box start the search.

    b. right click on cmd in the list programs, and then click run as administrator.

    c. If you are prompted for an administrator password or a confirmation, type your password or click on continue

    d. at the command prompt, the following line and press ENTER:

    sfc/scannow

    For more information, see the article:

     

    Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

    http://support.Microsoft.com/kb/310747

     

    File system (CFS) Checker

    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/system_file_checker.mspx?mfr=true

    Method 2: You can also check the below mentioned article Microsoft Knowledge Base and check if the problem persists.

     

    Advanced Troubleshooting for shutdown problems in Windows XP

    http://support.Microsoft.com/kb/308029

    Let us know if that helps.

  • After that windows update, the system stops without warning and can not perform restore

    My computer automatically performed an update on yesterday now it pc closes down without warning system will not perform a restore to an earlier date that I get a message that an unexpected error occurred during restore. I tried two different restore points, any help is appreciated.

    Hello

    There are a variety of reasons for system restore problems

    Norton and Norton product Tamper Protection is the main

    Read about it:

    http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20101101224849EN&LN=en_US

    http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

    You can try restoring the system in safe mode

    http://www.windowsvistauserguide.com/system_restore.htm

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode option with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

    and malware can interfere with the restoration of the system

    Download update and scan with the free version of malwarebytes anti-malware

    http://www.Malwarebytes.org/MBAM.php

    You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

    http://www.bleepingcomputer.com/download/anti-virus/rkill

    If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode with networking with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.
  • Satellite Pro L630 close without warning

    my laptop has been close without warning - today got an error message on any ideas - failure of the cooling system

    If it is the fan / repairable or perhaps other components default?

    Hi Yannos

    I think that your laptop turns off automatically due to high temperature.
    Probably the cooling fan (cooling module) is no functions and therefore the CPU cannot be cooled properly.

    The notification that received you today confirm my hypothesis.

    In my opinion, the cooling module must be checked and probably replaced in order to solve the problem of cooling.

  • Satellite Pro started to stop abruptly without warning

    Hello

    Can someone advise me, I have a Toshiba Satellite laptop, it is around the age of 13 months, and he began to stop abruptly without warning.
    It seems to be when I run high processor applications.

    I have 3 questions,

    (1) it is first of all, this laptop will always be covered by the warranty, even if he is 13 months old?

    (2) is it a simple fix for this problem of overheating?

    (3) I looked online and it seems to be a very common problem with Toshiba laptops, has there been a recall on all models?

    Thanks for any help you can give me?

    > 1) the first is, this laptop will always be covered by the warranty, even if he is 13 months old?
    Standard warranty covers portable duration 12 months. If you didn t buy additional coverage then the manufacturer's warranty no longer valid.
    But in my country, the dealer covers the portable 24 months long then maybe you should ask your dealer for info.

    (> 2) is there a simple fix for this problem of overheating?
    Well, the temperature could be higher because of the dust and debris inside the cooling rack.
    You could possibly solve this cleaning fans and cooling grids. I use the jet of compressed air. This could help you as it helped me

    (> 3) I looked online and it seems to be a very common problem with Toshiba laptops, has there been a recall on all models?
    This isn't a problem common with Toshiba notebook but unusual for all series of laptops from all brands.
    After a while the debris may clog the cooling system because the cooling fans are always placed at the bottom of the unit.
    It is advisable to clean the fans from time to time to ensure good air circulation.

  • Using Firefox 4 and Windows 7. Whenever I have to start Firefox from a shortcut to a Web site, what happens with the following error "there was a problem sending the command to the program". The requested site is loaded after that. without any problem.

    Using Firefox 4 and Windows 7. Whenever I have to start Firefox from a shortcut to a Web site, what happens with the following error "there was a problem sending the command to the program". The requested site is loaded after that. without any problem.

    If a shortcut is used while Firefox is already open the error will not occur.

    For me, the problem was the FoxClock extension. Once I disabled it, the problem was gone.

    Hope this helps.

    Olivier

  • Satellite C660-1F1 has start off without warning

    Recently my laptop Satellite C660-1F1 start off without warning and I read in other forums that it could be an overheating problem.

    You have advice on how can I fix?

    Thank you
    Paul

    Yes, one of the solutions could be the cleaning of the cooling fans.
    Dust and debris inside the unit and cooling modules may affect the functionality of fan.
    The air circulation could be affected too then remove the dust using a jet of compressed air.
    Its good tool to get these issues resolved without separate laptops.

  • my lap top was close without warning or command especially when I watch movies online

    my lap top was close without warning or command especially when I watch movies online.i just ts will puff and must be reseeded again and again

    my lap top was close without warning or command especially when I watch movies online.i just ts will puff and must be reseeded again and again

    Looks like it's overheating.

    Use Bing or Google to search for information on your particular laptop (maybe the support forum for your Dell, Toshiba, HP, etc.) and determine how to combat overheating.  You may be able to 'fix' it's using compressed air to clean the vents and/or using a cooling pad under the computer laptop and even run a small fan external imed in the inlet.  May not be recommended by people IT but I often run my old laptop without battery to reduce heating.  And of course, you might have a fan does not properly.

    Doubtful that the malware is causing your problem.   You have every reason to think otherwise - no evidence of infection

    Kind regards...

  • Why the recent updates to Windows are close my IBM ThinkPad without warning? Help, please!

    Since I installed the latest Windows updates on my IBM ThinkPad (belongs to the office, one for me), the computers have decided to stop randomly without warning and without closing programs.  It happened first in the portable desktop computer and I tried a system restore, but it wouldn't.  Today, I installed on my computer but after I did a system restore.  I'll try that, but I guess that this will not help.  What can I do to get this to stop happening?   Is anyway to switch to Microsoft and tell them what is happening and have them repaired?

    OK, removing the updates does not solve my problem, so reinstalled. I solved the breaks down by turning the bottom of my screen Hardware Acceleration 1 notch. Always try to understand the underlying cause.

  • Given that the upgrade to Windows 8 my PC turns off without warning after an hour or so.

    Given that the upgrade to Windows 8 my PC turns off without warning after an hour or so. Any ideas?

    My PC is an Asus
    3 GHz Celeron Prosessor
    2 GB of ram

    Hello Kenneth g. Mann

    What version of Windows 8 you have installed on your computer?

    The only thing I can think of that would cause the computer shut down every 2 hours would be if you have the Windows 8 Preview of consumers or the Windows 8 Preview version. These two operating systems were copies of the assessments only and were set to expire on 15 January and 16 January.

    Click the link here , which deals with these issues.

    If you have previews of Windows 8 evaluation, please answer and provide your version of the operating system and any error if set.

    Thank you

    Marilyn

  • XP Home Edition does not start without the installation CD after reinstall.

    I reinstalled XP Home Edition on my PC without formatting the drive first in order to keep all of my data.  I have installed all service packs.  However, for some reason, I had to call Microsoft to get validated.  The only problem I have now is that it does not start without the installation CD in the drive.  I have XP on the half before the C drive and me on the back of half.  The reader is a digital WD800JBRTL of Western.  Well it worked like that for years. Why can I now not start without the CD?

    HiNeal2660,

    It seems that the NTLDR file is not on the C: drive. NTLDR is the boot loader for all versions of Windows.

    You can perform a Windows XP repair installation & check if you are able to start normally.

    For more information, please visit this link: perform a repair Installation

    Hope the helps of information. Please post back and we do know.

    Concerning
    Joel S
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Pavilion 14-al015na: new HP laptop reboot without warning

    I would like to start by saying that I am not savvy computer very waves and too complex answers will just go over my head. Honestly I do not know if I chose the right subforum for it (sorry if I don't!). Please try to put the answers in stupid people talk

    I bought a HP Pavilion with a processor intel core i3 (this: http://www.johnlewis.com/hp-pavilion-14-al015na-laptop-intel-core-i3-8gb-ram-1tb-14-natural-silver/p...) there are less than a month and I barely use it's really for uni starts back. Despite this, I had problems several times with it restarts without warning, while I'm in the middle of something. I also had this error message once: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED (bcmwl63a.sys) as it turns off. He also asked to be restarted for updates and just because he apparently wanted to basically all the time it is turned on.

    I moved all my documents, photos and music from my old laptop (also a HP) to my new but I have left the program etc. files behind. My old laptop had issues where it would freeze and become completely unresponsive (does not restart as in the case of my new laptop) and have to be turned off by the power button, and anything I worked on to lose and it was one of the few reasons I decided to replace it. In addition, whenever I turned on it he grew up a pop-up, the kind you see when you install a program. I uninstalled the program in question, but the pop-up persisted. I've always had a McAfee antivirus protection on all of my devices - computers of my phone, which was connected to the time - but I guess that something got through between the cracks?

    Basically, I would like to know if the issues with my new laptop are the result of a virus or not (the same who touched my old laptop?) and of course be saved or not. Thanks in advance,

    Estella.

    @leaf2,
    Thanks for joining the Forums HP, Estella.
    I'll be happy to help you!

    I understand that your laptop will restart without warning after posting the message-"(bcmwl63a.sys) SYSTEM_THREAD_EXCEPTION_NOT_HANDLED" once, it freezes constantly and frequently reboots, here's what I recommend that we do:

    According to my research, it could be a bad driver, the origin of the problem otherwise we will need to perform a test of hardware on your memory card, I'll let you know how to do this, later.

    To remove the bad driver, I recommend the following steps:

    1. Start Control Panel, click hardware and soundand then click Device Manager.

    2. Expand the node under network adapters, right-click the device entry, and then click on Properties.

    3. Select the driver, and then click Roll Back drivers, if it is gray in color (impossible to click) select uninstall drivers.

    Made the above, restart the computer and then go to the HP website and download the latest drivers for your network card: Click here.

    If the problem persists, click here for - "How do I run a test of hardware on your laptop.

    Keep me posted!

    Kind regards

Maybe you are looking for