my hard drive and dvd rom connected to port IDE 1 in mother MSI bored drive D: is missing

Similar Questions

• Vista Ultimate on HP DC 7900 Mini lathe, always charge readers of cd rom and dvd rom.

  I installed Vista Ultimate on a HP DC7900 minitower. Clean install on new hard drive. Have no cd and dvd rom installed on the same cable (ide).

  It is on a small network of three computers, 1. XP 2. Vista Ultimate 3. Windows 7 Professional 4. HP Laserjet 4000N 5. Router DLink 825.

  No other computers have this problem.

  Since the first day, when the computer should be slowed down and in fact is in mode 'sleep', the tasks of the computer (seeks?) first the dvd rom and cd rom drives. I can only describe as a ratcheting noise. It lasts only a few seconds, but takes it approximately every 20 minutes.

  I installed all the updates for Vista on a regular basis, of which none have eliminated the problem. He did it since the day that I install.

  The only way to stop the problem is to stop the computer everyday and restart the next day. I can't let it run all night. When I run all day, if I walk more than half an hour, he start "multitasking" records rom again.

  Anyone has this problem next to me?

  Thanks to all those who may have the solution.

  I could go to Windows 7 on this computer and probably should, but do not have eight hours to spend in the upgrade right now.

  Hello

  I suggest you to check the link below to perform hardware diagnostics:

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00849402&LC=en&cc=UK&DLC=en

• I have a cd and dvd ROM on my computer but it will not read the discs and is not recognized on my computer

  Original title: no dvd

  I have a cd and dvd ROM on my computer but it will not read the discs and is not recognized on my computer

  Hi Lesliestones,

  ·         Did you do any change on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest refer you to the article in the Microsoft Knowledge Base and check if it helps.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Method 2: You can run the fixit and check if it works.

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  I hope this helps.

• bought a new player/encoder from cd/dvd external - I want to physically remove my CD players and DVD ROM old, internal, two

  Original title: How can I remove a CD player?

  Hello

  I just bought an external player/recorder for use with my PC (XP Professional) CD/DVD.

  I want to delete my two old, internal, CD and DVD ROM drives in my PC, and to make the new default value.
  What configuration changes should I do it before (or after) I disconnect them? I don't ever want to reuse them.
  Thanks in advance for any advice.
  Martin

  Nothing, they are used or should not appear in the BIOS. Thus, they do not appear in windows (once you delete them).

• CD and DVD rom does not

  My Thinkpad z60m 2530-38U, I upgraded to Vista Home Premium and a bigger hard drive; everything worked well, until I noticed that I can't read or write CDs or DVDs. I got the help of this forum before, and I would appreciate if anyone can share with me a possible solution to this problem. Thank you

  Try first reseating the drive. Go to this site to Microsoft, and then run the utility "FixIt":

  http://support.Microsoft.com/kb/314060

  Let me know if this solves your problem

  See you soon,.

  Mark

• CD Rom and DVD Rom not reading discs

  Hello

  My CD/DVD-rom is not reading any music cd or a DVD movie that I insert in the drive. I looked in the currency manager and the samsung cdrw/dvdsm-352F material displays a yellow exclamation point. It gives me a code 41. He says that the hardware is installed, but cannot read the device.  Can you please let me know how I can fix this.  Thank you!

  
  

• CD and DVD-Rom drivers have suddenly stopped working

  Device drivers CD/DVD-Rom does not recognize the CD and have suddenly stopped working.

  you have changed the cd rom or dvd rom and does not recognize the CD... go to my computer and you see that there is no cd/DVD-rom installed - there is the http://support.microsoft.com/mats/cd_dvd_drive_problems/ solution

• my cd rom and dvd rom will not installed I win windows startup.

  CMOS configuration shows the cd and dvd

  Hello

  1. when the question is is produced?
  2. don't you make changes to your machine before the problem?

  I suggest that you follow the steps mentioned in the article and check if the problem persists.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

• I have a sony vaio with built-in mic, camera and dvd rom and burner. everything dissappeared, I'm lost how can I get these things back working on my laptop, please help?

  can you please help?

  Hi TaraBaisden,

  1. you receive messages or error codes?

  2. When did you start the questions?

  3. you remember to make changes to the computer before this problem?

  You can try to run the fixit of material and check:

  http://support.Microsoft.com/mats/hardware_device_problems/

  You can also check the status of these devices in Device Manager.

  a. Click Start, Manager type of devices in the start search and press ENTER.

  b. double-click the device category to see an extended list of devices of this category.

  c. right-click on a device, and then select properties to view general information about the drivers.

  d. the status of the device, if there is a problem, an error code will be displayed.

  You can check if the error message or error code is the same for all devices failed.

  Hope this information is useful.

• HP Elitebook 2650p: hard drive is broken, missing os

  Disc ward of my laptop and I can't have my Win 7 Pro back! How can I order and solve the problem?

  Initially, the cell will have the recovery Partition and that would give you an option to create a recovery disk set. If you have not created these recovery discs when the laptop was in working condition we can do right now

  From now if you need to recover your laptop through the new operating system, you can check if the recovery Partition

  is a condition in a work, or not, if yes you can easily recover/restore your laptop

  If the recovery Partition is corrupted

  You need to call HP Support and demand for a set of recovery disks, then you can recover/restore your laptop at the earliest

  OR

  You need to call Microsoft and buy an operating system with the license key, so that you can recover/restore your laptop at the earliest

  I highly recommend you Contact HP Support by phone for assistance without delay

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  Although I am an employee of HP, I speak for myself and not for HP

• Moved Lightroom 5 catalog Previews.lrdata file on hard drive external now missing Images! Help!

  Hi all

  Help, please.  To try to free up space on my MBP with 128 GB SSD, I moved the file 'Lightroom' of my 'Images' folder to my DHM.  When I open LR could not find all the pictures, so I moved the file to my MBP and back in the folder "Images".  Only problem is now there is a charge of missing images last year.  I have all my CR2 files on my DHM so, luckily, I still have the physical copies of the originals, but all my changes disappeared.  I spent dozens and dozens of hours editing family shots and other photographs and I'm very nervous that I may have just lost all?

  Please please help...

  Thank you...

  I can't answer the question about missing images. However, after you move the Lightroom for the EHD folder you open that folder and double-click the catalog file in its new location. After that, if you have preferences in Lightroom configurΘ for the most recent dΘmarrer Lightroom Catalog use the catalog located on the EHD.

• My computer does not start a player - A does not exist and does not recognize my hard drive.

  My computer does not start. I tried to solve a problem with the disappearance of CD and DVD ROM drives, I unplugged then replugged cables connecting readers to the motherboard and when I rebooted, it told me to insert a bootable media in the floppy drive. I don't have a floppy drive. Before I tried to repair CDs and DVDs, my directory showed an A/floppy disk, because it seemed weird, yet benign, I don't think many, until my BIOS could not find my hard drive. It offers my USB drives and there is no such thing as a floppy drive to boot from. Help?

  If the drive is not detected in the bios, and I guess you actually mean the bios screen, then the drive has failed or the motherboard connections has a problem.

  Once in the bios screen try to reset for fail safe defaults, reboot, see if that makes a difference for the drive detected in bios

• _NEC DVD_RW ND-3540 has and HL-DT-ST DVD - ROM GDR8163B

  Recently, I noticed that the computer does not recognize any CD or DVD, then I looked at my computer, and (a DVD r/rw) and DVD - ROM drives have disappeared. In Device Manager, two disks have by them exclamation points. I tried to update the drivers, but Windows could not find an update or another. Where can I find the drivers for "_NEC DVD_RW ND-3540 has and HL-DT-ST DVD - ROM GDR8163B?

  Please read the next page & run repair tool:

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  For more software related troubleshooting visits to:

  http://support.Microsoft.com/kb/982116

  S.Chatterjee

• Windows 7 and problems with my external hard drives

  I have 2 Lacie (Big Disk Extreme) 1 TB external hard drive attached to my desktop system.

  When I press the Start button and go to devices and printers, the "yellow icons exclamation point warning" are located next to each external hard drive icon.

  Right click on each hard drive icon and going to solve problems, I learned that for each hard drive drivers are missing.

  When I let Windows 7 try 'Apply this difficulty', it is failed every time.  It is said that it cannot search the drivers of these drives.

  Go directly to the site Lacie, there are no drivers to download for these external hard drives (which are around 18 months of age).

  What gives?  How can I get Windows 7 to stop warning me of these external hard drives?  I don't remember having to download all the drivers for these external hard drives when I was with Windows Vista.

  Help!

  Try this...  I found a solution now using Partition Wizard Home Edition 4.2, - its free, then open it to find readers and by assigning a different letter on the external drive - Bingo... applying the changes the disk with the icon is displayed in the pane of the computer and I am able to open the drive!

• HARD drive disappears after accidental factory driver reset in a Dell Opti gx270s [:(]

  This is how my sound card, a Creative Labs Audigy Platinum decided to go missing in action. So I removed and installed a back upward. It does not solve the problem but it worked fine in another PC. I took and came back to the system of its integrated Realtek or something. It was a little confusing.  Soon I realized that it had been turned off in the BIOS. Well well, I was getting a little nervous about the State of things then I went to install a RW/CD-ROM drive so that I can get some criticism upward current, as I had learned how to integrate the operating system with all service packs and drivers of motherboard and everything to make it a perfect installation disc I thought I'd do adisc this and do a full backup of all the files needed, but I couldn't get any of the three DVD CDRW drives to work. I got the drivers for each permanent and I knew at least one of them was basically new, and all of them were in good condition. I couldn't get one of them to be recognized by the. Well, I'm not stupid, but I was under a huge strain of workload. I went online to get the factory drivers default to the gx270s and downloaded, but luckily it moments later I had this revelation... "It must be in the BIOS" I thought to myself, and of course, when I went to check, this is exactly the case. I made the necessary changes and as soon as I restarted with changes saved to the new factory default drivers BIOS came into effect, and he would not see the HARD drive and when I loooked in the BIOS, there is no HARD drive side although I had two connected to the SFF gx270s I've had for a decade. Any advice would be appreciated :'(]

  If there is a problem with the IDE drives detected in BIOS, the problem has nothing to do with drivers. Indeed, the device drivers for your hard disk and DVD player are generic Windows drivers, so that they are almost impossible to mess up. The SATA controller driver is not a driver generic, but which would not impact on your IDE hard drives.