My headphone port works not

Similar Questions

• headphone port works not

  I have a toshiba laptop.  I recently tried to plug the headphone speakers.  A cam question asking if it was a helmet or output.  I hit the exit when should have touched just headphones and now can't find how to change it.  Tried to connect other headphones and speakers, but the settings have changed and now can not hear through the laptop speakers.  Would appreciate any help, thank you

  Hello

  You can change the audio device by default.

  a. Click Start, type Sound in the box to start the search.

  b. click sound in the results of search at the top of the start menu.

  c. click the reading notice the check mark next to the default device.

  d. right-click on an empty area and click Show disabled devices.

  e. you will now see the audio devices disabled with the arrow pointing down on them.

  NOTE: These audio devices may vary according to the audio card installed or chip you have.

  f. right click on each listed off audio device that you want to activate and click Activate.

  g. you can now change the property settings on these audio devices in the way you want.

  h. click OK to close the sound window.

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Ethernet port, audio port works not

  Just buy new motherboard Asrock g41-mvs3 R2, all things work well, but the ethernet port and audio port works not!  Help, please!

  Hello

  1. you receive an error message?

  2. What is the brand and model of your computer?

  3. in Device Manager, is there a yellow triangle on the elements that don't work?

  4. the Device Manager reports features like work or does it actually say there is a problem with the devices you listed?

  Please provide us with more information so you will help more. See this link:

  Suggestions for a question on the help forums

  http://support.Microsoft.com/kb/555375

  See the following link for more information.

  Open the Device Manager

  http://Windows.Microsoft.com/en-us/Windows7/open-Device-Manager

• My headphone port does not work.

  I have a Windows Vista laptop and my headphone port no longer works. When I plug my headphones in, only the right speaker works. It worked before but stopped when I turned it on this morning. I tried to restart my laptop but it still does not work.

  Please respond quickly!

  Hello

  1 when was the last time it was working fine?

  2. did you of recent changes on the computer?

  I suggest you connect other earpiece to the front port and check if it works, it's to check if the port is not bad.

  Also, make sure that the default audio device is properly set on the computer.

  Verify that the default audio device is correctly set

  (a) click the Start button, click Control Panel, click hardware and soundand then click sound.

  (b) click on the read tab make sure that the correct default audio device is selected. (For most users, the default audio device's speakers and if you have connected headphones then it should be set as default device)

  (c) if the default device is not set to the right audio device, on the read tab, select the appropriate device, click Properties, click the Advanced tab and verify that the default Format is set to the value you expect. When you are finished, click OK.

  (d) on the Read tab, select the playback device, click set upand make sure that the configurations are set correctly.

  (e) if the sound settings are set correctly and that your speakers are already set as default device, go to "Check if an audio driver is installed" now.

  (f) select the audio device you want as audio device by default, and then click set as default.

  (g) click on OK to save your settings.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  If this does not work it could be a problem with the port which is connected so need to check if it works well or not.

  Try to move the holder after connecting the port and check if it works fine in both speakers or not.

• Satellite L650 - eSATA port works not

  Hello

  I am owner of a [Toshiba Satellite L650-14F | http://se.computers.toshiba-europe.com/innovation/ro/product/Satellite-L650-14E/1086065/] laptop that is running 64-bit Windows 7 Ultimate.

  I recently acquired a [ICY BOX IB-319StUS2-B | http://www.raidsonic.de/en/products/external-cases.php?we_objectID=6831] drive enclosure external HARD who takes in charge the SATA II 3.5 "hard drives and can be connected to the computer via USB 2.0 or eSATA.

  I use it with a Samsung SpinPoint F3 1 TB HARD drive. The problem is that I can't get the eSATA port to work. I enable in the BIOS, SATA interface is defined on the performance and the AHCI mode. I installed the latest Intel drivers for the SATA controller and eSATA, as well as the software Intel Rapid Storage Technology (RST). If I connect to the enclosure via eSATA, that nothing is happening. Intel RST makes external SATA port as empty and no drive appears in Device Manager in Windows.

  The drive works properly by the USB bus and even via USB in the eSATA port, because it is a port eSATA/USB combo.

  At first I thought it was a faulty box or cable eSATA, with which it came, so I returned it and got a new. However, after seeing that the new behaves exactly like the one I started wondering if there isn't a problem with the hardware with the laptop. I started searching the Internet for similar behavior. I met a lot of reports of external hard drives not recognized on eSATA in Windows 7 64 bit, but work fine on XP or Windows 7 32-bit, especially with 1 TB drives and more.

  I've also seen a few similar reports with eSATA on Toshiba laptops on this forum. I'm not really sure how to proceed in this case, or what can I do else except for the installation of Windows XP and Windows 7 32-bit to see if it works there. But even if it works, this still does not resolve my problem. I don't want to go back to XP, and I would not like to use Windows 7 32 bit on a system with 4 GB of RAM.

  Any other suggestions would be appreciated and as I open this thread for other people in similar situations to contribute their experiences. What worked and what didn't.

  Thanks for the comments.

• iPhone headphone output port IS not working do not

  helmet SE iPhone does not work. Bought new Apple earbuds and determined this is the port the atria. Phone is only a few months old. Help, please?

  This morning, I installed the last 6update iPhone: iOS10.0.2

  My headphone stopped working this afternoon (after a few hours of use).

  I couldn't understand anything to make them work again. Returned and the phone and the headset are working again.

  Update Nevermind the last version of iTunes Music *. Each update is a version longer than music/iTunes

• Portege R500: Slim Port Replicator II - headphones not working not

  Hello

  I have gor Portege R500 with Vista preinstalled Enterprise.
  It's maybe just me in dense (!) but I can't get the headphone jack to work when it is in the Replicator (and the Replicator does not have such a plug).
  The headphone jack works well when it is off the Replicator and the speakers connected it work very well also...

  I have played with the settings in vista and still can't make it work - any ideas?

  m

  Hello

  You must first check the Toshiba drivers for the last sounddrivers download page. Download and check if the problem occurs again. If not, everything is OK, but if not then come back and we'll talk more about your problem.

  Welcome them

• I have an imac 27 "... on power there is no signal to startap, usb ports are not working and its deadlock with the logo of the Apple with the circle of rotation... Help, please

  I have an imac 27 "... on power there is no signal to startap, usb ports are not working and its deadlock with the logo of the Apple with the circle of rotation... Help, please

  Wake the computer to your Apple store or Apple authorized service for the service provider. He probably suffered a hardware failure.

• Zbook G3 HP: HP Zbook Thunderbolt 3 Dock USB ports not working not

  I have a HP Zbook Thunderbolt 3 dock on my HPZbook G3.  I've recently updated the BIOS and the firmware to the latest version to solve other problems 'dock '.  Am now at the latest for both.  The two monitors and ethernet on the work of lightning 3, but none of the USB ports are active.

  I am sure that the USB ports work, because they used to work before the update BIOS and firmware.  Keyboard, mouse, or USB memory on the dock work.

  I tried to go to the HP support and install the updates with the USB in it, but it didn't work.  I have a workaround - just connect the laptop directly, but I'd like to get my fully functioning dock.

  Device Manager does not display devices with questions.  I'll try to update, but I don't know which one to look at.

  

  Hey people,

  HP is dedicated to providing quality products to meet the needs of our customers. We listen to the customer feedback on our recent Thunderbolt Dock for use with the latest products ZBooks, and Elite Notebook. We continue to work with our customers to solve problems.

  Please find tips and updates to improve your use of the HP Thunderbolt docking station.

  1. The Thunderbolt dock uses the latest technology thunderbolt. To be fully functional, it takes the latest firmware, BIOS, and drivers to work properly. Please follow the step by step process as described below in "The process of updating your device".
  2. Here are links to the user, technical white paper guide helps and guides troubleshooting. Please, use them to help when you have problems after you have fully updated your device and platform by following the instructions above. Please note that you may copy and paste the links in your browser.
  3. If you still have any questions, please call HP support. We're here and eager to help succeed you using the HP docking station new Thunderbolt.

  Useful links

  User Guide: http://h20565.www2.hp.com/hpsc/doc/public/display?sp4ts.oid=11122586 & docLocale = en_US & docId = emr_na-c05141189

  Technical white paper: http://www8.hp.com/h20195/v2/GetPDF.aspx/4AA6-5088EEW.pdf

  Help & troubleshooting the Dock: www.hp.com \support\thunderbolt3dock

  Process to update your device

  NOTE: Instructions below is found in the User Guide "Getting Started" to "Implementation of the dock" to "step 2: update your computer.

  Before connecting the dock to your computer, update the BIOS, software and drivers on your computer.

  NOTE: If you do not, the wharf may not work. For best performance, keep all software and drivers on your computer up to date. (See table 1)

  Update the BIOS and the software and drivers:

  1. Go to http://www.hp.com/support. Select the drivers and Get software, enter your model of computer (on the computer service tag) number, and then select search for my product.
  2. Click the link for your specific computer, select your operating system and then download the latest version

  BIOS, software and drivers as follows: Intel® Thunderbolt Firmware Update Utility, Intel's Thunderbolt

  Secure Connect Driver, graphics drivers, ASMedia eXtensible Host Controller Driver, Broadcom Ethernet

  Controller and driver Conexant USB driver.

  1. Install the latest version of the BIOS.
  2. Restart the computer.
  3. Install the last stroke of lightning Secure Connect driver Intel.
  4. Restart the computer.
  5. Install the latest Intel Thunderbolt Firmware Update Utility
  6. Restart the computer.
  7. Install any remaining updates in any order. Restart the computer after each update.

  Table 1

  For the products supported Thunderbolt Dock all HP
  Name of the component	Category on the Support Page on hp.com	Where to check (this applies to all laptops)
  BIOS	(BIOS)	BIOS F10 Setup to information system
  Intel's Thunderbolt course connect driver	(Pilot - controller)	Right click on tray icon Thunderbolt to settings for details.

  The Thunderbolt of Intel® firmware update utility

  (Firmware)

  Right click on tray icon Thunderbolt to settings for details. Note that the numbers on the left will not directly reflected. NVM Firmware Version: 16 PD Firmware Version: 1.07.03

  Intel Graphics Driver

  (Driver - graphics)

  Right click on the desktop to graphic properties (icon intel) Options & Information Center Support.

  NVIDIA graphics driver

  (- Graphics - Nvidia driver)

  Right-click on the desktop to NVIDIA control panel to information system at the bottom left.

  AMD graphics driver

  (Driver - graphics)

  Right-click on the desktop to graphic properties (top) to Information to software.

  ASMedia eXtensible Host Controller Driver

  (Driver - Chipset)

  Programs & features or the Device Manager to Universal Serial Bus Controllers (dock of needs to be connected).

  Of Broadcom Ethernet controller driver

  (Driver - network)

  The Device Manager to network adapters (dock of needs to be connected).

  Conexant Audio Driver USB

  (Audio - driver)

  The Manager of devices to sound, video and game controllers (dock of needs to be connected).

  BPPSQ-

  I work on behalf of HP

• Headphones not working not

  Kind regards

  I am using windows 7 Pro (32 bit) on HP Elitebook 8540p. After the installation of win 7 I noticed, that the computer does not recognize headphone when I their connection. Sound continues from computer speakers.  Could you please help me with this problem?

  Thank you

  Panchovilla4741 wrote:
  

  Only the speakers are listed as a playback device. Headphones are also not working. Do I have to reinstall the audio driver?

  Hello

  Reinstall Audio driver can help. Please download it from this site

  Kind regards

• NB200-12N - USB port does not work

  Hello

  I updgrade my OS from windows 7 starter edition to now a windows 7 home basic 32-bit usb port does not work is the (only) in the left near card reader sd and lan.
  Can you please hellp me to install it? I have download the drivers from Toshiba for my NB200
  But does not work.

  Thank you

  Paulo

  If everything is OK and right drivers all USB ports should work. You cannot install the drivers for each port separately and force one of them to work properly. On this machine, all three ports are the same USB2.0 ports.

  Try reinstalling the chipset utility.

  By the way: two other ports work well, right?

• Satellite Pro L10-103 - USB ports not working not

  Hi, my Satellite Pro L10 - 103 USB Ports do not work. I tried different things and finally my Advisor rubbed my computer clean of all programs and operating system. After reloading of the set up disc and having lost my dear some programs I am no further forward. It still does not.

  Anyone know if this means that it is a mechanical problem with the computer? (I use Windows XP). Your help would be greatly appreciated.

  Hey Buddy,

  As wrote Akuma did you use the Toshiba Recovery disk or the Microsoft Windows disk?

  After installing XP, make sure that Service Pack 3 is installed. It contains important updates and can be downloaded on the official page of Toshiba.

  In addition, try to remove all the USB ports on the Device Manager, restart the computer. Ports will still be recognized and ready to use once.

• Peripheral storage but not with ethernet connection USB port work

  I usually connect my Mac Book Pro with ethernet using the USB port. It was working fine, but since a few weeks, it has stopped working. But the normal usb storage devices only works very well in this port. So, I tried to connect the ethernet to another USB port near the seizure of power, which seems to work very well. So, that means that the other USB port does not work properly. How can I fix? I use Mac Book Pro with the Version OS X El Capitan 10.11.4

  Try resetting the SMC reset management system (SCM) controller on your Mac - Apple Support

  Shouldn't use you a crush on Ethernet card instead of a USB adapter to Ethernet?

• Tecra S1: USB Ports do not work correctly

  That one of my USB ports work correctly - that next to the DVD player. The two rear appear to be defective. Sometimes, they will work, but usually isn't. I have a Microsoft Notebook Optical Mouse and when I plug it into one of the ports back, it lights or control the cursor in Windows XP or Linux, but it does not work in the port on the side.

  I tried it with different settings of the BIOS for example disabling USB legacy mouse, KB and floppy and COM and parallel ports, but it did not help.

  There must be some kind of life in the faulty ports, because when I plug the mouse in all running Linux (I don't know where to look for the error logs in Windows), I get a series of error messages like this:

  USB 2-1: new device using uhci_hcd and address 2 low speed USB
  USB 2-1: error reading/64, device descriptor - 71
  USB 2-1: error reading/64, device descriptor - 71
  USB 2-1: new USB device of low speed using uhci_hcd and address 3
  USB 2-1: error reading/64, device descriptor - 71
  USB 2-1: error reading/64, device descriptor - 71
  USB 2-1: new device using uhci_hcd and address 4 low-speed USB
  USB 2-1: device not accepting address 4 not, error-71
  USB 2-1: new USB device of low speed using uhci_hcd and address 5
  USB 2-1: device not accepting address not 5, error - 71

  Post edited by: ngolian

  Hello

  Try to remove all the USB ports on the Device Manager, and then restart the device. Check again the ports with different USB devices. If the result is the same, it must be a hardware malfunction. Maybe the contacts!

  I'm afraid that the appliance must be sent to the service. :(

• Dynadock USB Ports not working not

  I have a Toshiba Dynadock (unfortunately I do not know the model number I can't). It is less than a year and has two USB ports in the front, with 2 Sockets (I guess that one of the earphones and a microphone), has 4 ports usb at the back and probably a DVI/HDMI port as well.

  The problem is that none of the USB ports work on it, you plug a USB device into one of the ports and Windows 7 does not detect something that is attached. It was working fine until recently, and then the printer started to play up by printing only a few lines in a document that you asked to print, and then after that nothing worked (I don't think that the printer is at the origin).

  When I reassembled the eject button on the dock, Windows recongonises ejection and hot flashes with the software Dynadock saying "Dynadock has been ejected" or similar.

  The computer is a Toshiba. I reinstalled the drivers, made a restore to a date when I heard he was working and have restarted the dock, but nothing worked so far. Any suggestion would be appreciated.

  Thank you

  Hello

  Try it please use this driver - http://www.displaylink.com/support/downloads.php