Portege R500: Slim Port Replicator II - headphones not working not

Similar Questions

• Portege R500 - Slim port Replicator II: dual monitor DVI & RGB all

  Is it possible to use a double configuration monitor on a Port Replicator II slim if I connect a DVI-port monitor and the other to the RGB port?
  I have a laptop Toshiba Portege R500.

  TIA

  Hello

  I didn t find all the information about the Advanced Port Replicator II but I found some info on Advanced Port Replicator III and the simultaneous use of RGB & DVI ports

  So the point is it's possible * ONLY * if portable system unit _itself also includes simultaneous use of RGB & DVI support_.

  concerning

• Portege R500 - Slim port replicator monitor external activation question

  Hello
  I use a Toshiba Portege R500i and a thin replicator II

  I have the extensions mobile tosh running and set to activate the external monitor only on the dock. This works very well if the machine is open and connected, BUT if the machine is closed and will then sleep, I dock, turn it on, the mouse and the keyboard light upwards and the screen does not turn on. If blindly, I type my password, the screen is activated. Also, if I opened the laptop and log in to the external display is enabled.

  How can I get the screen to activate without logging in?

  your
  Bob

  Hmm.
  I think first of all you must update the Mobile Extension of TOSHIBA.
  Then, you must make sure that in the "TOSHIBA Mobile Extension" "Service of change of display" is checked and the release of 'the view' has the value 'Different internal/external of the Image' in the tab 'change of display Service.

  In addition the display driver update.

  I'm not very well if it will be a solution but it s m without a doubt worth a try!

• Portege A600-133 - Slim Port Replicator III does not entirely

  Hello...

  I just got a Slim Port Replicator III (model PA3681E-2PRP) and annexed a number of devices (a VGA monitor, a USB keyboard and a USB mouse), according to the user manual.

  The unit, however, does well with my laptop (a Portege A600-133). Specifically, the laptop battery does not, the devices are not recognized and docking led remains off. However, the laptop turns on and off of the port replicator power switch, and the ethernet port also works very well.

  Clues?

  Thank you!

  Dimitris

  Hello
  I also had problems with the Portege A600 and Slim Port Replikator, when I just connect, works all good! Maybe it's too you, when you try to connect to the port Slim R. you: with your hands the laptop with Slim Port R. extra press together in the Air about where the connector is, one when she makes "Clack" and then a right is connected!
  Sorry for my English

• Portege R600 cannot detect Toshiba Slim Port Replicator II PA3603U-1PRP

  Hi all

  My Toshiba laptop is Toshiba Portege R600 D260 with Toshiba PA3603U - 1PRP Slim Port Replicator II (REF: PA3603U-1PRP), the problem is "PA3603U-1PRP Toshiba Slim Port Replicator II can't detect the USB Port.

  I wonder that PA3603U-1PRP Toshiba Slim Port Replicator II is not suitable for Toshiba Portege R600 - D260.
  Please help me,
  My Skype: hau.vancong

  According to the specification of the laptop, with this notebook, you must use Toshiba Replicator Slim of ports with PA3681E-1PRP part number III.

• Portege R700: Speed Port Replicator HI + USB Vista questions

  Good afternoon

  I am having trouble with 4-5 new R500-1hd (311th short number), the number could be higher, but users could not have reported it.
  If the laptop is disconnected from the HI Speed Port Replicator 2, it off very well and the laptop can be used, but when the laptop is brought back it does not recognize the mouse or the keyboard. The device does not appear as an "unknown device" in Device Manager, but just does not at all appear.

  A new problem that has arisen is again when the machine is off station USB devices install\work not unless they are connected on port SATA\USB, once again the machine failed to detect at all. Even when devices are picked up, it may take in any case of 30-60 seconds before the work of the mouse and the keyboard.

  These are corporate images deployed through WDS and the problem is very intermittent.
  A reset is applied each time the device will be detected.

  I had a couple of flying machines and finished the stretch prior to the computer with Windows 7, computer image portable devices all work fine with or without the docking station and can be used instantly.

  Isn't anyone has an idea how I can fix this problem?

  Concerning

  Kris

  Hello

  As far as I know speed Port Replicator HI new supports the USB 3.0 standard.
  I found the USB driver on the European driver Toshiba for the USB 3.0 feature page.

  I recommend that you install this!

  Thanks for posting comments after trying that

• Portege R500 - keyboard USB Legacy support does not work

  I have a Portege R500-124

  I use it to dock in the office and the lid is closed, so I need to enter a password for DriveCrypt and generally control the boot/BIOS from a USB keyboard. But no matter what I set the setting that is inherited from the USB in the BIOS, the USB keyboard does not work. I tried the keyboard connected directly to the R500 when undocked and it's all the same. I also tried BIOS 1.6 and that's all the same.

  USB keys are working and I can boot from them, but no work of measures (for example, F12 to choose the BOOT device) keyboard - the R500 doesn't seem to have the functional USB keyboard support until an operating system (Windows or Linux) has started.

  Any ideas?

  Ian

  > .the R500 does not appear to be the functional USB keyboard support until an operating system (Windows or Linux) has started.

  I can't confirm this, but I'm afraid you're right about that.

• Portege R500 - error message "sound device is not supported" THotkey

  Hello

  Whenever I have start up my Portege R500 I get THotkey message error "sound device is not supported. \
  The same error message repeats when I touch the volume icon. There is also no sound.

  Any idea what causes this? I have tried to uninstall and reinstall the driver most that can affect the shortcut key and the sound.

  Thank you

  Nico

  Is it Vista or XP?

  Have you installed Windows yourself or it was preinstalled?

  Maybe the wrong driver was installed (of another model for example).

• Tecra A9 - Express Port Replicator: DVI does not

  I recently bought a Toshiba Express Port Replicator for my laptop Toshiba Tecra A9 PTS52E because I need DVI to connect my external monitor to the laptop Tecra A9 has only a built-in VGA.

  After you connect the laptop to the monitor I get no output on the external monitor, however. Descriptions of Replicator Port Express said that it has a DVI - D, my monitor has a DVI - D and the cable is a cable DVI - D single link so everything * should * work.
  I don't get out Visual at any time, nor in the BIOS (I can't find any options BIOS based DVI as well) or the OS.

  What is the trick to get this working? I have tested the monitor on the other workstations and the VGA out of the docking station works with other monitors as well, but unfortunately not via DVI with that I want to use.

  Hello

  Like many I know the on some series laptop Port Replicator DVI port unusable if the laptop doesn't supports this port!
  For example, the Tecra M1, M2 can use the DVI - D port and Tecra S1 cannot use it!

  Perhaps the with the Tecra A9

• Portege R500 - USB ports no longer for 35 to 60 seconds after standby

  When my R500 (running Vista Business) wakes in sleep mode, Vista is ready to be used within 7 seconds approximately. It would be great, except that the USB ports and the function Bluetooth wake for another 25 to 50 seconds.

  I use a USB or Bluetooth mouse and I find that this long delay start spoiling the otherwise excellent user experience.

  Has anyone noticed the same problem, or did someone knows a solution?

  You use a USB or Bluetooth mouse?

  Try updating the chipset drivers. You can find it on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  In addition, an update of the BIOS could also solve the problem. Try it!

  You have installed the laptop with the Toshiba recovery disc or disc of Microsoft?

• Portege R500: external monitor does not work with the Port Replicator Port 2 and DVI

  I have a Portege R500 running Vista with a slim Port Replicator II and digital monitor Viewsonic.
  I connected the monitor to the DVI port on the port replicator and got it to work OK.
  Press fn + F5 would switch between the computer screen and the external monitor.

  Then it stopped working, and I can't make it work at all. F5 recognizes just the laptop screen.

  If I connect an analog display, it is fine, and I can pass between the two screens without difficulty.

  The strangest thing is that, if I reboot when the Portege R500 is docked, the digital monitor begins by displaying the boot sequence, but then the signal is lost as soon as the screen stops the display of the progress (in low resolution) bar.

  I spent an hour on the phone to support Friday, and he made me nowhere.
  They finished by saying that he should never have worked! So what is the DVI port because then?

  Any ideas?

  David

  Connect your monitor directly to your laptop and see if it is recognized and you can go through FN + F5 between the two views.
  If it works, then connect with port replicator, and then try again.

  It's probably best if you reinstall display drivers. Maybe there are new too on the download page.

• Port Replicator Slim 2 - resolution wide screen

  Hello

  Consider buying a Slim Port Replicator 2 for my Portege R500.
  I have two questions about the Replicator:

  The maximum specified. resolution is 1600 x 1200. I want to connect a monitor with a resolution of 1680 x 1050. Will this work?

  I'm using linux and I'm worried if there is some kind of windows driver only required to operate the Replicator?

  Hello

  I m not port replicator expert but to my knowledge the Slim Port Replicator 2 supports 1 x RGB (monitor), 1 x DVI port (video) that allows a resolution of 1600 x 1200 max.

  As mentioned the DVI port supports 1600x1200px max and other higher resolution is not possible.
  But maybe you'll be able to choose your favorite of the 1680 x 1050 resolution using RGB (monitor) port

  Best regards

• Re: Portege R600 - port replicator is compatible with regional products?

  Community of greetings from Toshiba,

  I need to buy laptops for several employees who are moving between the United States, the United Kingdom and the Middle East.
  The Portege R600 exist in all 3 markets, but each has a slightly different part number.

  The part number Replicator of compatible Port to the R600 is difference to the United Kingdom, the United States and the Middle East.
  Users would be able to dock their laptops in one of the 3 offices, because they travel extensively between each country.

  What's the Slim Port Replicator II (PA3603U-1PRP) and Slim Port Replicator III (PA3681E-1PRP) compatible with each of the products of the soil of Portege R600?

  United Kingdom Replicator of ports Slim Portege R600-11B (PPR61E-01G00CEN) III (PA3681E-1PRP)
  Middle East Replicator of ports Slim Portege R600-10 b (PPR61E-00F00MAR) 2 (PA3603E-1PRP)
  USA, Portege R600-S4201 PPR60U - 01700C Slim Port Replicator II (PA3603U-1PRP)

  Someone has an experience buy Toshiba products in the Middle East? Or needed to use Docking Stations in offices in several countries?

  Thanks in advance,
  Ted

  (I posted a similar request in the Forum we and receives no answer - http://laptopforums.toshiba.com/t5/Port%C3%A9g%C3%A9-Laptops/Port%C3%A9g%C3%A9-R600-US-UK-Middle-East/m-p/32060#M489)

  Post edited by: TedRNelson

  Hello

  I think that it shouldn't be a problem with the different Portege R600 in combination with the Slim Port Replicator 3.

  Portege R600-11b, R600-10 b belongs to the same series (PPR61E), that the R600 US belongs to the PPR60U, but this should t be a problem.

  As far as I know the different R600 from different regions are not really different (some belongs to the same series) as far as I know there could be a difference between some pre-installed applications and some modules as for example the card wireless network, but this should not affect the use of Slim Port Replicator 3.

  Cheers mate

• Portege R500: What DVI port duplicator would be compatible

  Hello

  Does anyone know what DVI port duplicator supports the portege R500 laptop.
  When I look at the product and its accessories none of the replicators of ports lists the portege R500 as a notebook taken in charge.

  Maybe there isn't one right now?

  Hello

  I also used the Web from Toshiba site Options & accessories search and found the following:

  -Dynadock - USB Universal Docking Station with video (DVI) Phase 2 PA3542E-2PRP
  -Slim Port Replicator 2 PA3603E-1PRP
  -USB 2.0 Port Replicator II (Ethernet / EU Version) PX1173E-1PRP

  If you need additional information on these individual devices then simply google for these reference numbers.

  Good bye

• Portege Z30-A-12N with Port Replicator Port Hi-Speed USB III problems

  Hi all

  I have a big problem with my new Portege Z30-A-12N and Hi-Speed Port Replicator III.

  I connected the power, DVI, LAN, mouse and keyboard to the Port Replicator.
  Power, DVI and LAN are okay, but none will be found if I connect something to the USB Ports 2.0 or 3.0.
  No mouse, no keyboard, and no USB key.

  When I start my Portege I must enter a password after you press the power button.
  These password, I could enter with the external keyboard, but in windows, no keyboard has been found.

  If I connect the keyboard and mouse to the USB Ports of the Portege instead of Port Replicator, the two has been found.

  I ran Windows 7 Enterprise on the Portege.
  BIOS version is 3.30

  Do you have a solution for me?

  Hello

  The HI-SPEED PORT REPLICATOR III PA5116E-1PRP supports 2 x USB 2.0 and 4 x USB 3.0 ports.
  You n t special need Win 7 drivers in order to be able to use the USB ports or other interfaces such as VGA, DVI, audio, etc.

  Sound problems, make sure that the audio device has been selected in the right panel-> sound-> playback tab

  By the way: Win 7 needs USB driver 3.0 which is preinstalled when the laptop was equipped with USB 3.0 ports. My knowledge if your mobile phone does not support USB 3.0, you will be able to use the port replicator USB 3.0 ports.

  Finally and above all devices must be connected before you start the computer. The decision supported and compatible specifications: Portégé R30 - A, Tecra Z40 - A, Tecra Z50 - A, Portégé Z30-A/Z30t-A, Tecra A50 - has