my hp deskjet 1050 printer does not work.

Similar Questions

• HP Deskjet D1560 printer does not work with this laptop with windows7 Home premium

  My printer works with windows vists computer but it does not work when connected to my laptop which runs on windows 7 Home Edition premium, can any body help on this please?

  You are supposed to install the HP full feature software / driver, specific to your version of bit of victory, before connecting the printer

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4062&LC=en&cc=UK&DLC=en&sw_lang=&product=3374275#n191

• DeskJet d2430: printer does not appear in the hp Solution Center

  I installed the HP Solution Center. My scanner appears but the printer does not work so I can't align the cartridges or print test pages.

  How can I get the printer on the solution Center

  Welcome to the HP Forums @eclife

  I saw your post on how you manage not to run a test print from the solution Center pages or alignment, and I wanted to stop sharing my own suggestions.

  Try to download and install the full feature software and driver, and then try again: series of printers HP Deskjet D1400, D2400/D4200 Full Feature Software and Driver

  A few links to help:

  Align the ink cartridges

  User manual

  If you have any other questions, let me know.

  Click on the thumb to below testify my help!

  Click on the "accept as Solution" if I'm you guide to a solution!

  Contact HP:

  Step 1. Open the link: www.hp.com/contacthp/

  Step 2. Enter the product number or select Auto detection

  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.

  Step 4. Scroll down and click on: contact HP options - click Get phone number

  File number and phone number appear

• HP 2549: HP 2549 and Mac OS x: double-sided printing does not work

  Hello!

  I just installed this printer on my Macbook Air and I cannot print double-sided. I tried by USB / wireless (in the case where there is a difference between the two) but no luck.

  I followed the advice in this post: http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/two-sided-printing-no-longer-availble-...

  but I did not tab "driver". I only have "Général", "Levels of power" and "utility." I tried to delete the printer and then add it with HP 2359 and AirPrint not but that does not change.

  When I print a pdf document, double-sided printed is greyed out and I cannot change.

  What should I do? I already reinstalled the drivers on the HP Web site, I selected all the things that I can install it, but that has not changed anything.

  Thank you.

  Hi @blablaalf,

  Welcome to the HP Forums!

  I see that two-sided printing does not work with your printer HP 2549 on Mac OS X 10.10. I'm happy to help with this problem!

  I assume that your printer is a HP Deskjet 2549, otherwise please reply with the exact type of printer you have. To find product/model number of your printer follow the instructions in this link. Find your model number of the HP product.

  Otherwise, if the type of printer you have. According to this guide, print on both sides of the paper (duplex printing). He said: this printer is not an automatic duplex unit integrated, you can always print on both sides of the page to manually reload paper in the paper after printing tray first to print on both sides of the paper.

  This is the reason why this option is grayed out.

  If you print on letterhead, pre-printed paper or paper with watermarks and pre-drilled holes, the printer prints first the front of the document. Load the paper with the top edge first and the side to be printed facing downwards.

• HP Deskjet 2512 Director does not work on Windows 7? Is there a solution?

  HP Deskjet 2512 Director does not work on Windows 7? Is there a solution? Everything that happens is two pages of text, open, but no Director. I downloaded and installed the latest version of the software full version DJ2510_1313. No help for it?

  Hi DJ2512,

  I understand that you have a Deskjet 2512 which is not able to open the Printer Wizard, it opens to text pages. I'm sorry to hear that, but I'll certainly do my best to help you!

  From what you described, it seems that your printer wizard opens to a page of the Notepad. I suggest you follow this document Opens Assistant HP printer with an error in Script or in Notepad to get the problem resolved.

  Hope this helps, have a nice day!

• My HP Deskjet 5740 printer does not recognize my new HP Photocartridge 348

  My HP Deskjet 5740 printer does not recognize my new HP Photocartridge 348. It is brand new, not expired, official but I only get black prints. I can't find anything useful on the HP support site. The printer is not set to only print in black.

  The cartridge goes in the slot for cartridges of blacks, there is no colourcartridge in the other location at this time. So either he needs a color cartridge to work together (but how to know I'm not only to print my photos with the colourcartridge and using the photocartridge as a black cartridge cheap?) or the printer believes that the photocartridge is just one other black ink cartridge.

  Any suggestions?

  The Photo cartridge has not all the colors, Photo black, cyan and light magenta.  It is used in conjunction with the color cartridge (which feeds the cyan, magenta and yellow) for photo printing.

  If you want to print in color, you will need a color cartridge.  The color cartridge can print in black (approximately) by itself, but the photo or black print cartridge cannot print without the color cartridge color.

• I downloaded the new software recently and now my Epsom printer does not work

  iMac late 2009. Processor 3.06 GHz

  Hi, I downloaded the new software recently and now my Epsom printer does not work and my Wi - Fi on the computer keeps dropping out.

  I spoke with Epsom and they recommended to remove the drivers and reinstall them. Now, I can not install the ad pilots Wi - Fi does not work correctly. The research on this forum I see there have been many problems with the new version of the software. Can someone help me?

  < re-titled by host >

  Try a reboot.

  Make a backup using Time Machine or a cloning program, to ensure that data files can be recovered. Two backups are better than one.

  Try to set up another admin user account to see if the same problem persists. If back to my Mac is enabled in system preferences, the guest account will not work. The intention is to see if it is specific to an account or a system wide problem. This account can be deleted later.

  Isolate a problem by using a different user account

  If the problem is still there, try to start safe mode using your usual account.  Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the UN-Installer. For each disable/remove, you need to restart if you do them all at once.

  Safe mode - on El Capitan

  Start Mode without failure-El Capitan.

• Installed at El Capitan and now HP printer does not work via the network

  Installed at El Capitan and now HP printer does not work via wireless network

  Open system preferences > printers and Scanners and select the print tab.

  Then the right or control click on the HP printer on the left then click: reset the printing system

• my printer does not work well

  MY PRINTER DOES NOT WORK WITH FIREFOX. WHAT DO I DO? THANK U

  https://support.Mozilla.org/en-us/KB/how-print-websites

• My printer does not work on Firefox?

  My printer does not work on Firefox? It works on explore?

  "My printer does not work on Firefox" gives no details on the problem. It is a good starting point:

  • http://KB.mozillazine.org/Problems_printing_web_pages

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You must update some plug-ins:

  • Plugin check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox

• changed router photosmart b110 e-all-in-one printer does not work

  changed router photosmart b110 e-all-in-one printer does not work

  Hi aged60,

  I'm sorry to hear that you have linking problems with your Photosmart B110 printer.

  I've included a link to HP Wireless Printing Center Troubleshooting web page.  In the section entitled "your printer was working on the network before and now is not" there are clear instructions to follow when your router has been changed or updated.  If you follow the instructions you should be able to communicate with your printer.

  HP wireless printing Center - Troubleshooting

  http://www.HP.com/global/us/en/wireless/troubleshooting.html

• Canon MX700 printer does not work

  After the update of El Capitan on my iMac, my Canon MX700 printer does not work. UGH!

  Mine has stopped working on Yosemite.  You have an old Mac OS X installed you can test it on?  You can run the test page for the printer itself?  I get the right error messages try to run the printer, and I ended up Canon to accept to sell me a MX922 at a discount.

• Smart Web printing does not work in IE9

  Smart Web printing does not work in IE9...

  I tried option, uninstall web printing smart hp and reinstalled. now it works... also if you use a pop up blocker, then you have to give permission to allow access to this site. It will come up as a small secondary window and print as did former windows messages.

• New Modem - like get a new modem my printer does not work

  Since obtaining a new modem, my printer does not work. The printer is a HP 4500 wireless all-in-one. What should I do?

  Hi reillydebra,

  1. you have made no changes to the computer before the broadcast took place?
  2. do you get an error message?
  3. what operating system do you use?

  If you use Windows 7, try the steps from the following link:

  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Why can I not print?
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Additional information:
  Check if you need to open ports in the modem.
  http://h20563.www2.HP.com/p/_wireless/troubleshooting.html
  http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_rule=59455&tmp_task=solveCategory&cc=us&DLC=en&lang=en&LC=en&product=3919449

• MS Office 2010 Pro and my printer does not work,

  I just installed MS Office 2010 Pro and my printer does not work, I tried to print a test page for the printer, but that prints either, ask if I want to troubleshoot the printer and when I click on Yes, I get a message that there is a problem of ActiveX.  The printer will not print not any application, but it worked before installing office.
  All the apps work except in order to print it.
  I am running WinXPPro w/sp3.

  Jim K.

  Hello

  1. What is the exact error message?
  2. don't you make changes on the computer before the show?
  3. What is the brand and model of the printer?
  4. this problem occurs with all files that contain the Active X objects or specific file?

  Method 1:
  Run the fix it and check.
  http://support.Microsoft.com/mats/printing_problems/en-us

  Method 2:
  Try the steps in the link and check.
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 3:
  

  This problem occurs if the security settings for the Local computer zone are configured to prevent the ActiveX content to run.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry : how to back up and restore the registry in Windows

  a. Click Start and run, type regedit.exe, and then click OK.

  b. expand the following registry subkey:

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\0

  (c) in the right pane, right-click 1200 and then click on edit.

  d. in the value data box, type 0. Then, click OK.

  e. close the registry editor.