OfficeJet Pro 8000 print head

Similar Questions

• HP Officejet Pro 8000 printer range makes the vertical white lines

  My HP Officejet Pro 8000 printer makes white vertical lines around text and photos.  What can I do?  I use Windows 7.  As far as I can see, the print heads don't need to be changed. Cleaning them would help? If so, how can I clean them? Thank you.

  Hello

  You can try the steps listed in this document:

  Troubleshooting print quality problems

  Let me know if it helps

• OfficeJet pro 8000: Officejet pro 8000 prints the part of the document

  Have a problem with both networking Officejet pro 8000's. If you print a paginated document 4, printing two pages and stops, then 2 minutes he feeds a white sheet of paper in the printer, the printer hangs then error light on, who need to power cycle to restart. The network is in a school, unused printers for a few weeks, before now, they both work as it should.

  This problem is with a laptop with free Wi - Fi. However, even 4-page document sent to another that officejet pro 8000 prints as it should, and prints as it should when sent to a photocopier.

  The network of small schools there are ten computers wired to office, after trying to print from one of them, the same problem occurs with 2 of 4 pages printing, then a white sheet, then the printer hangs. This desktop computer will also print the same document on the photocopier without problem.

  Not very well where to go with this, help please!

  Problem solved, simply wanted the new cartridges!, but what I do not understand why the part of a document of four pages would be absolutely fine print, all the colors print as they should, then stop and hang. Power cycle printer, exactly the same result. Exactly the same on both 8000 printers?

• OfficeJet Pro 8000 prints multiple pages of the same document

  Info:

  HP Officejet Pro 8000 A809a

  Windows 7 Pro 64-bit

  Last driver and firmware from HP

  When a job is sent to the printer (web, Word, Acrobat, etc.) the printer keeps printing multiple pages of the document.  Sometimes it will print the first page and a second partial page, then it reprinted again and stop at the same place on the partial page.  She does over and over again.  I ran the HP Diagnostic Utility and it was impossible to print a test page, even after turning the power on power off, then on.   Any suggestions, or is * another * bad printer?  The first was sent and replaced, so I think that this model is just a lemon.

  Thanks for the suggestion, but it didn't work.  I tried to reinstall the driver altogether package three times with no result.  I ran the utility programs that supposedly allows you to solve problems, but public services could not even to generate a test page.

  It seems that I finally found a solution, however.  I installed an older driver for MS Vista 64-bit, and that seemed to do the trick.

• HP Officejet Pro 8000 printer - A809a. Drivers not installed

  I have a wonderful printer HP Officejet Pro 8000 - A809a used exclusively as a network printer and works PERFECTLY. Yet, I have errors reported about drivers not installed in device (Windows 7, 64 bit Ultimate) Manager.

  These are:

  1] adapter Multifunction (x 1)

  -Officejet Pro 8000 a809

  The drivers for this device are not installed. (Code 28)

  There is no driver selected for the item or a set of device information.

  To find a driver for this device, click Update driver.

  AFTER DRIVER SEARCH:

  Windows could not find a driver for your device

  Try to use the drivers of "OJP8000vA809_Basic_14.exe" has been a failure.

  2 other devices (x 1)

  Same as above.

  [3] printers (3 entries)

  -HP Officejet Pro 8000 A809 Series. (This is the only good entry)

  Properties:

  The device is functioning properly.

  -b. Officejet Pro 8000 A809.

  Properties:

  The drivers for this device are not installed. (Code 28)

  There is no driver selected for the item or a set of device information.

  To find a driver for this device, click Update driver.

  AFTER DRIVER SEARCH:

  Windows could not find a driver for your device

  Try to use the drivers of "OJP8000vA809_Basic_14.exe" has been a failure.

  -c. Officejet Pro 8000 A809.

  Properties:

  As above.

  Disabling or even uninstall these additional entries have no effect on the function of network printer.

  BUT they continue to be replaced after the reboot.

  This situation will affect the perfornce of the computer.

  Any suggestions, please?

  Advance thanks.

  Thanks for the great instructions.

  Now I'm showing only a single instance of the printer asking for drivers multifunction adapter in Device Manager. Therefore, I uninstall and long and shows no return once again.

  One thing FO, this printer is not actually a multifunction type.

  The system is currently NOT error display or ask drivers.

  I'm hopping it will stay like that.

• inside printing with HP Officejet Pro 8000 prints pages out of order

  When you print a 3 page document with my printer HP Officejet Pro A809a print 'two-sided' setting, it prints page 1 to page 3 on the back, then page 2 on a separate sheet. How can I get the printer to print documents duplex in good condition?

  Hello

  You can check the printing preferences and duplex settings, see if you can change the order in this way.

  Set printing preferences and print

  1. In the menu file printing program, click print .

• OfficeJet Pro 6230: Print head: missing, defective or Incompatible

  

  I have a 3 month old printer Officejet 6230 Pro who now will not be printed.  I get this message: "print head: missing, defective or Incompatible.

  I tried:

  (1) the printer reset

  (2) I have genuine HP cartridges

  (3) removed, cleaned and replaced cartridges

  (4) Firmware update

  I cannot perform a "print head cleaning" or something like that.  I get the message "printer is busy. Try again later. »

  What else can I try?  How can I get this printer working again?

  This problem has been resolved.  Chat with support.  They ship me a replacement printer

• Officejet Pro L7780 print head error

  I have a Officejet Pro L7780 all-in-one. Recently, it does not work due to a print head error (printhead missing or damaged M/C). Help, please.  Thank you very much.

  Hello

  Use the following link to complete the troubleshooting steps.

  http://support.HP.com/us-en/document/c01446637

  If you still receive the error message after you perform the steps in troubleshooting mentioned in the document, then try cleaning print head in the printer menu.

  Installation Menu - Tools - cleaning print head

  Configure the Menu - Tools - align printer.

  If none of these help then try this reset... This reset will restore the printer to its factory settings & will clear all the settings of the printer.

  Unplug the cord from the back of the printer while the printer is always enabled.

  Now hold "# & 9 ' buttons on the printer and connect the power chords while pressing the 2 keys. Wait 10 seconds, then release the keys.

  If the printer turns off automatically, then wait for 10secs. and then turn on the printer using the power button on the printer.

  I hope this helps.

• OfficeJet pro 8500: print heads and things

  OK, maybe it's a bit confusing. I have three printers Officejet 8500. No. 1 went into a never-ending cycle of clean print heads (after more than 30,000 pages) and without me being in the room the right side of the printer depot of ink on the table. Tried the reset but not good. Bought a second hand and after a few weeks, it came in paper jam mode. Could not resolve so finally bought number three. Works a treat and has no problem. Numbers one and two are for recycling. Print heads removed and stored in an airtight box with damp cloth. What is staging. Now after spending all that money, the last thing I want, it's having problems with number three. However, I have three cartridge sets new and unopened from PC World (their own brand) which cost £39. They came with the number two of the machine. They are not dated and has no way to know at what age they are. They are not oem, I can't any advice on their likely performance, but what worries me, is can the ink begins to solidify and block print heads as they age? Like I said they are still sealed. If I change the cartridge and use a spare set of the print heads to check the print output and that something is wrong if I can swap cartridges and print heads back without the printer enter the cycle of constant head cleaning. I know there have been issues with these printers but mine is on 27 000 pages and all tests are reports back in good health. I have also several chips of HP cartridges genuine that I can use.  Sorry as that a little long-winded.

  Hello @notahappybunny,

  Welcome to the forums of HP.

  I understand that you have some questions and concerns about your ink cartridges non OEM 8500 and some.

  I would like to help.

  The following document explains on the expiry of the ink.

  Consumable inkjet HP - ink Expiration

  From what I've read, it's I think I understand that the ink may change over time.

  Because ink is sealed I don't think they're going to solidify, but the pigment used in the ink may eventually separate from water. This will certainly cause print quality problems.

  In addition, your first 8500 printhead might not be good.

  A bad print head may cause the impression of entering the cycle without end cleaning.

  I hope that I have answered your question.

• HP Officejet Pro 6835: Print head: missing, defective or Incompatible for 6830

  My 8830 printer is only 6 months old and today I just received this message "print head: missing, defective or Incompatible. Tried to reset and same question as other messages. It seems that he is a typical problem with this printer. Someone can help or will it take to complain about Costco for the sale of this product?

  Hello
  
  Thank you for using the HP forum.
  
  If you receive this error, is there nothing more you need to do, except to contact support.
  
  Depending on where you are in, please select the appropriate link:
  
  Series 6800 printer supports training US, Asia
  http://support.HP.com/us-en/document/c04839288
  
  Series 6800 printer supports statement Europe Middle East Africa
  http://support.HP.com/us-en/document/c04839289
  
  Thank you.

• Have a HP Officejet Pro 8000 printer. Had magenta streaks.

  Checked print head magenta/cyan by removing and replace it. Now, after each print job, I get an alignment page printing. How can I stop this?

  As a general rule, if the printer prints the alignment page frequently, then the printer is having a problem of electrical contact with the print heads.  Try to remove the printheads and clean the electrical contacts, make sure that the print heads are firmly installed in the printer.

  Also, check the steps described in the document, found here, to troubleshoot when a printer prints an alignment page frequently.  I hope this helps.

• Officejet Pro 8600 print head error message

  I get an error message "print head seems to be missing, not detected, or incorrectly installed. Printhead missing or failed. "I followed the solutions provided on the printer as printer be disconnected and reconnected. out of the cartridges as demo showed. Everything was going well. Reconnected to the router wireless system. All to nothing does not. I bought this printer in February of this year and had no problems until this has happened in the last few weeks. It is still under warranty. I need this fixed or replaced immediately. What should I do? Thank you for your help.

  Hello

  Please click HERE to access the procedure which should solve the problem.

• OfficeJet Pro 6835: Print head problem

  Getting the message print head problem. I checked guaranteed, says it is active, but when I click on contact HP support, I get the following: "this product is is more served by HP.» You can search for possible solutions on this Web site.

  It absolutely won't let me access a form to fill for the customer support, nor give me additional info on how to solve this problem. Any suggestions?

  Step 4 don't give me the phone number and the file number. This option is chat or twitter. Waiting for chat now. Do you have an indication that the warranty was until December 29, 2016.

  Edit: Cat ordered a replacement with an order number, so I think we can close this.

• HP Officejet Pro 6830: print head

  print collapsed in the middle of the page.  screen says just problem with printhead.

  E troubleshooting steps in the document, itcan help solve the 'problem with printhead' question on your Officejet 6830. Most likely, you will need to contact HP for service.

• HP OfficeJet Pro 8000: No power to my HP OfficeJet Pro 8000 printer

  I was outside for a few days and when I came home had no power light.   Our power went out briefly while I was gone.     It is not connected to a surge protector.

  Hi @Dewey43,
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, HP experts and other support staff. I understand that you have a problem with the printer turns is not on. I'll be happy to help you.

  Please follow the steps of the printer is not turned on.

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.