My iMac doesn't start

Similar Questions

• iMac does not start after 10.11.6

  Since the 10.11.6 patch my IMac does not start with my hub plugged.

  Everyone

  I assume you mean a USB hub? What does do when it's plugged in? It starts successfully when the hub is not plugged? If so, I would say that something is wrong with the hub or there is a problem with the port it is plugged or something plugged into the hub.

  Try to plug it into a different USB port on your Mac.

• How to install my final studio cut in my iMac 4 k Vince? The 4K Vince iMac doesn't have an optical drive

  How to install my final studio cut in my iMac 4 k Vince? The 4K Vince iMac doesn't have an optical drive.

  You need to buy or borrow and external optical drive.

  Apple sells a:

  http://www.Apple.com/shop/product/MD564LL/A/Apple-USB-SuperDrive?FNODE=5F

  There are others also available-

  http://eShop.MacSales.com/item/OWC/MRSSDSDT8X/

  BUT do not forget that the FCS has been abandoned by Apple years ago, and the latest Apple operating systems are built without any concern as to the functionality of the FCS.

  Some of the apps in FCS are dead in the water, and others work with features limited or erratic.

  Anecdotal reports of problems running FCS on model are all over the map. Some do work, some don't.

  In addition, FCS2 has problems with the included Installer, requiring Rosetta to run (which is no longer included in the operating system), so it will not install without workaround.

  MtD

• Two iMacs does not start after the 10.11.4 update.

  Two iMacs does not start after the 10.11.4 update.  Progress bar starts moving and then text appears on the black screen saying unexpected sigkill to launchd.  He then gets stuck in a loop trying to start.  Tried to reset the SMC and LANDAU.  Without success.  Started in recovery mode and ran disk utility.  Discs said OK.  Chose to reinstall OS X from the list of options in the recovery mode (assuming it would be 10.11.4).)  Installation is finished but still once does not start.  Reinstalled on 10.11.0 successfully from a USB key and downloaded the 10.11.4 combo updater.  Installation seems to work, but once again, the macs will not start.  Same 'unexpected launchd sigkill' error.  A mac is now back working properly with 10.11.3 the other will be shortly.  Is there a problem with the accession?  Our COMPUTER support use Munki to get updates from one day to the next.  Fortunately, we were able to stop it before the other 20 or if Mac had the same problem.

  More information: two bricks iMacs were late 2013 models.  A 21 "and a 27.  We have just updated a test iMac which was a late model 2012 using the 10.11.4 combo updater.

• My iMac does not start correctly. Instead, I just a gray screen. Safe mode starts, it's ok. No problem. So I ask what next step can I try? Thank you very much

  My iMac does not start correctly. Instead, I have a gray white screen. Safe mode starts, it's ok. No problem. But not in safe mode, only grey screen again.  So I ask what next step can I try? Thank you very much and sorry for my bad English.

  Reinstall El Capitan without erasing the drive

  Make sure that you have a current backup before continuing.

  HD recovery start:

  Restart the computer after the ring, press in and hold the COMMAND and R keys until the menu screen to appear.

  Repair

  When the recovery menu appears, select disk utility and press the continue button. Disk utility charges and select Macintosh HD entry indented from the list on the left.  Click the first aid tab in the toolbar... If disk utility reports any errors that have been corrected, then re-run first aid until no errors are reported. Wait until the operation is complete, then quit disk utility and return to the main menu. Select restart from the Apple menu.

  Reinstall OS X: Select reinstall OS X and click on the continue button.

  Note : You will need an active Internet connection. I suggest to use Ethernet if possible because it's three times faster than Wi - Fi and more reliable.

  In the future please post in the appropriate forum. Your question is not related to the developers forum. I will take care of moved it.

• Pictures on a new iMac won't start - he's trying to fix the photo library after the migration of my old iMac.  The two are running El Capitan

  Photos on my new iMac won't start - get an error message after trying to fix the photo library.  I just migrated all of my old iMac a new aid of Time machine backup.  Both are running OS 10.11 (El Capitan).

  Get an error message after trying to fix the photo library.

  What does this error message say?  Photos crash or exit gracefully?

  Where your iPhoto library that Library stored? In your pictures folder, or on an external drive?

  Try to copy the library of Photos directly without Time Machine. Connect the two Macs using your network and copy the old Mac to the new library, well as signed in on your new Mac.

  Then try to open this copy in Photos.

• my microsoft security essentials stops suddenly... it disappears from the lower tray and doesn't start again... Despite the relocation, the sane never happens again...

  my microsoft security essentials stops suddenly... it disappears from the lower tray and doesn't start again... Despite the relocation, the sane never happens again... Help, please

  You can be better to ask here - http://answers.microsoft.com/en-us/protect/forum/mse in the region of MSE.

  If you post here, please post error messages or event log error reports about this, if there are.

  Meanwhile check for malware on the PC which may be trying to stop the MSE by download, installation, update (by right clicking on its icon and 'run as administrator' then go to the update tab) and scan with malwarebytesfree.

• RAM Preview doesn't start when simultaneous multiple images rendering enabled

  Hi all

  
  

  I have a problem with coating AE CC, with my new PC computer in 8.1 Windows pro 64 bit

  
  

  As the title says, my question is where Ram preview doesn't start when simultaneous multiple images rendering enabled. It starts really 8-30 seconds depending on the complexity of the project and the rendering is slower and jumps frames!

  12 cores with 2 GB of ram each.

  When I turn off the option of several images simultaneously made starts ok.

  but it's really very sad that I can't use this beast of a CPU to full potential. a new processor intel i7 5930 KB, 32 Ram DDR4 2.4 Ghz
  

  
  

  Advice and options would be very appreciated.

  
  

  Thank you

  Vonzar.
  

  
  

  
  

  
  

  
  

  Installation program:

  8.1 Windows Pro 64-bit

  CPU: Intel Core i7 5930 K 3.5 GHz Six Core Socket 2011 - 140W box 3

  GPU: nVidia GeForce GTX 970 4 GB DDR5 PCI - E

  RAM: 32GB DDR4 Non ECC CL16 2400 MHz Crucial Ballistix Sport

  Motherboard: Asrock x 99 extreme 6

  Using all 12 hearts ever sense. It is slow because the images I/O and disk cache kill all the bandwidth, and of course there may be effects and used features that simply don't work well with the MP.

  Mylenium

• Adobe Cloud doesn´t start at windows startup?

  Hello

  the cloud doesn´t start with windows. The settings are ok. Is there a service that needs to run? Windows Autostart configuration no entry to the cloud.

  Any idea?

  Thx for the help

  Best wishes

  Hi w4ll4ce,

  Welcome to the Adobe Forum,

  There is an option in preferences CC which disables the launch at startup. Go to the CC icon to appear in the window, and then click the icon for ESM. Now select the preferences... command.

  in the window that appears now, check the option 'Start to launch' and close the window via the red button at the top left.

  Now the CC lights at the launch of the windows IE at the beginning.

  Kind regards

  Baudier

• Dell inspiron m5030 doesn't start, post 7 beeps continuously

  Dell inspiron m5030 doesn't start, 7 beeps post continuously, not screen, does not. I tried to start in safe mode, but it did not work.

  Beep Codes Code Description

  1 system tray, covers the BIOS corruption or ROM error

  2 (*) No. memory / RAM detected

  3 Chipset system board failure

  4 failure of memory

  5 CMOS battery failure

  6 video card / chip failure

  7 CPU failure

  8 LCD failure

  
  

• iMac does not start after the last security update

  Hello

  After the last update my iMac (late 2009, El Capitan) does not start.

  The iMac starts he accepts my user and password entry, the loading bar stops at 80% and then nothing happens... after I turn off the iMac. Repeating this procedure change nothing.

  Does anyone have any advice for me?

  THX

  INTELLECTUAL PROPERTY

  a solution that helped me:

  Re: security update causes damaged Apps

• My iMac G3 Dosent Start Up! Help please!

  Hi my iMac G3 Dosent Boot... When I used it.... he stop it yourself. and it does not turn on AGAIN.

  I dissconected he of the seizure of power a day later I plugged it in I started, but when the power led was green it closes it self

  down and has not AGAIN turn.

  One?

  its a bondi 1998 model blue (ORIGINAL)

• Target mode iMac won't start plu

  My iMac 27-inch became unbootable, due to the well known failure of AMD Radeon HD 6970 M video card.

  My computer is 4 years and 4 months and Apple refuses to replace the card through the replacement program.

  I'm not ready to pay the amount to fix the card.

  How can I recover data from the hard drive works perfectly?

  I does not start correctly, it makes a loop and loop, I use mode target with another Mac, or do I have the GUI to work?

  Are there other solutions or do I physically remove the hard drive?

  Thanks in advance!

  OS X El Capitan: transfer files between two computers using target disk mode

  This procedure works for any OS X.

  If this does not work, just to retrieve your data from your backup.  No reverse?

  If this is the case, you've learned a very expensive lesson not to trust to your

  digital resources on a single device, no matter, Android, Mac, PC, iPhone etc,.,.

  the fact is electronic devices may fail.  No no no backups is an accident waiting to

  occur.

• Why iMac has suddenly started asking to sleep after password?

  Hello

  I have my standard account set to auto connect. But for some reason any iMac has recently begun asking password after walking computer from sleep mode. Why is this?

  Go to: Apple > System Preferences > Security & privacy > general, open the preferences panel

  and uncheck "Require password _ after sleep or screen saver starts"

  

• My iMac doesn't stop correctly

  My 2011 iMac (27-inch) running OS X El Capitan vs 10.11.5. Starting last month, when I have that be tempted to stop the computer or the computer would awaken after being dormant, it will freeze. The desktop, but none of my icons and status bar. I have to do a hard cock down. Suggestions for a fix?

  You have the Wacom tablet software installed?