My laptop screen will sign in page in the minute

Similar Questions

• Pavilion series: computer laptop screen will Flash after seconds

  my core i 3 hp pavilion laptop series 4 GB ram, 500 gb hd, 2.4 processor has a problem, is that its screen blink after seconds, what is the problem? is there any solution?

  Hey,.

  Thanks for getting back to me so quickly.

  Was the link of the Image on the screen flickers the same as what you see?

  Don't you hear the fan runs constantly?

  You see anything on your screen?

  Please, try the following steps:

  • Reset the BIOS
  • Perform a hard reset
  • Connect the laptop to an external monitor

  Do you see an image that is not flashing on the external screen?

  Forward to your response.

• laptop screen will not return to the only projector tv works

  I have a Toshiba laptop, watching a movie on my TV which is connected to my computer, but now my TV screen works and my laptop screen is dark and cannot be read. When I try and disconnect, my screen remains black, I turned my computer off several times to reset but nothing works, is there something else to do. Thank you.  Keith S.

  Hello

  It looks like there is a hardware problem so you should contact a real
  computer shop (the one that works internally on Toshiba) orToshiba support.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Laptop screen will stay off when connecting to an external monitor

  I have a laptop Acer Extensa 5430 and when I connect an external monitor to the laptop screen remains. I used the Fn + F6 key to turn off the screen of the laptop but it turns shortly after that I turned it off. I searched a lot of blogs and not yet able to understand this. Any help would be appreciated. Thank you

  PROBLEM SOLVED, go to the Windows Mobility Center, then click on connect display, then check external display only.

• My laptop screen becomes empty whenever I disconnect the plasma

  Recently, I connected my computer laptop to LG plasma to see a movie (using RGB output) and changed the accodringly to display definitions. However, when I disconnected the cable from the laptop, the laptop screen became blank. When I reconnect the cable - I see the laptop screen (even if the plasma is off). Now I'm stuck to work with a cable connected to nothing...

  When you restart the computer, I see the screen, it disappears when windows comes on.

  I've redefined (by using windows + P) the computer screen only - did not help. I've updated the display adapter and monitor in Device Manager - did not help. No virus detected; Nothing to do with the BIOS...

  Ideas please?...

  Hello

  I suggest you to uninstall and reinstall the drivers to display the computer manufacturer's website and check that I get no help.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

   

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

• Computer laptop screen turns off (it returns when the mouse is moved) when the settings say should not

  My laptop screen goes black after a minute, even if I put power to never the brightness options and it stop after ten minutes

  Hello

  Try to run the electrical troubleshooting utility and check.

  Troubleshooting of power allows to solve any problem with the computer's power settings.

  a. press the w key and Windows and type troubleshooting.

  b. press ENTER.

  c. click Show on the left panel.

  d. click Power.

  e. click Next and follow the on-screen instructions to solve the problem using the troubleshooting of power utility.

  Also, try to create a new power plan and check if it makes a difference.

  Go through http://windows.microsoft.com/en-in/windows-8/power-plans-faq

  Hope this information is useful. If you have any questions, please let us know.

• Satellite L555-10N screen will not shut down after 10 minutes of non-use

  Hello

  I recently acquired a laptop Satellite L555-10N, which so far has proved to be a good choice.
  I have a little problem, however:

  In the preferences of my energy, I put the time during which the screen should turn off, 10 minutes, if the laptop is not in use.
  Although this worked well for the last few days and weeks, the display now will be not closed at all.
  I did not change the BIOS or driver or whatever.

  I remember to change some preferences in the configuration ecoUtility to enable.
  At that time, I received a message that preferences should be modified to enable the functionality and I agreed.

  I could not notice any changes have been made, but from there, the screen off more.
  I would appreciate your help!

  Thank you!

  Hello

  What operating system you are using?
  For Vista and Windows 7, I founded a good article on Windows power management settings:
  http://APS2.toshiba-tro.de/KB0/HTD84026Q0000R01.htm

  In addition, you can change the settings for each profile. This means that you should choose turn it off the display function for this power profile that you use or all profiles, if I used all of them.

  Check this box!

• Laptop computer will not be connected to the internet.

  Never had a problem with my laptop (windows 8, toshiba) until today. It's only a couple of months. I tried to connect to two different WiFi my laptop disconnects and say that the network is 'limited' I have other devices connected and know the WiFi is fine. When I plug my laptop to charge it is fine and remains connected. This isn't usually the case. What can I do?

  Hello

  Don't forget to update the drivers of network, as indicated below.

  Check with support of the system, their drivers and documentation online manufacturer and ask
  in their forums on known problems.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  ---------------

  Free Wi - Fi and wireless problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Note the use of Win Key + X and Win Key + W (to access control panel, run,
  and settings according to needs). Win + D key calls to the office and use
  Win Key activates / deactivates the desktop and start screen.

  --------------------------------------------------------------

  Control Panel - Network and sharing Center - solve problems

  References to Vista also apply to Windows 7 and Windows 8.
  
  Your router be guess here, you have successfully updated the firmware a possible
  solution? And I would update your WiFi drivers on computers. How far away are they
  you have set in the router? Are there obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click
  top - tab of the driver - write version - click on update driver (can't do
  nothing that MS is far behind the certification of drivers). Then right click on the Wifi
  Device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Microsoft - How can Windows 8 - I fix the network adapter problems? (Do not forget to see
  This section-> update the NIC driver).
  http://Windows.Microsoft.com/en-us/Windows-8/fix-network-adapter-problems

  Drivers and Microsoft - Windows 8 - Hardware
  http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

  Microsoft - Windows 8 - why Windows is not find my device?
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  Microsoft - Windows 8 - what happens if a device is not installed correctly
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system Maker you can see the same device manufacturer
  more recent versions. (Those become your fonts of rescue system manufacturer).

  Repeat for network (NIC) card and is a good time to get the other update
  Drivers Windows 8 like updated drivers.

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - set up a new connection or network

  -----------------------------------------------------

  And:

  TechingItEasy - how to join a Wi - Fi network in Windows 8 by MVP Andre Da Costa
  http://techingiteasy.WordPress.com/2012/06/09/how-to-join-a-Wi-Fi-network-in-Windows-8/

  Microsoft - Windows 8 - Web & Networking
  http://Windows.Microsoft.com/en-us/Windows/Web-networking-help#V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1&Web-networking-help=Windows-8

  Microsoft - Windows 8 - Wi - Fi & Networking
  http://Windows.Microsoft.com/en-us/Windows-8/WiFi-networking#1TC=T1

  -----------------------------------------------------

  Microsoft - Windows 7 - Why is my Internet connection so slow? (applies to Windows 8)
  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-Internet-connection-so-slow

  Microsoft - Windows 8 - wired and wireless in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• When the touch screen will be available to customize the ENVY dv6t-7300 Quad Edition

  I am a customer of long date HP and we ordered that several custom laptops as well as we have in our office workstations.  I have 2 laptops, I am ready to replace, the two dv6t for about 3 years and touchscreen offered then.  I don't want a ultrabook.  I'm in the publishing house and a workaholic must plan the most everything.  I've been periodically check since October and still no touch screen option.  I really want to leave HP, but one of the portable won't last much longer is there an eta or that's going to be a possibility?  With Windows 8, it makes no sense, why it is not currently available.  Thank you very much for your help!

  Please do not worry much about it. HP comes with several touch new innovative, capable, high, elegant setting designed and echonomic models. Please look out for all the products and you will certainly love them.

  There are touch screen active portable computers for the launch of HP in the months 1-2.

• Since March 5, Firefox will not load pages except the home page.

  Firefox just says 'connection' tab and after thirty minutes the page does not load. I have tried rebooting my computer several times and have uninstalled then reinstalled Firefox. It is not a problem with the connection, and does not seem to be a problem with my safety. I use Firefox for more than a year on this computer, then suddenly that. What should I do?

  Type of topic: preferences #advanced< enter > in the address bar.

  Under Advanced, select network.
  Search for configure how Firefox connects and then press the settings button.
  Check the settings.

  Some problems occurs when your Internet security program has been implemented.
  trust the previous version of Firefox, but not more acknowledges your
  update as being approved. Now how do I solve the problem: to allow
  Firefox to connect to the Internet

  • Make sure your Internet security software is up-to-date (for example, you are using the latest version).
  • Delete Firefox to list your program of programs approved or recognized. For detailed instructions, see

  Configure the firewall so that Firefox can access the Internet. {web link}

• Photosmart HP7575 will not print pages from the automatic document feeder

  All of a sudden the printer kicks on blank pages after auto and manual scan.  What is the problem?

  No problem! I am happy to know that everything works now after performing a reset on the printer. Could you please check the 'accept as solution' on my post, if you feel that my not resolved your issue, or click ' Bravo Thumbs Up ' on the left to say thank you for helping. Have a great day!

• Updated but will not print pages from the internet

  I had AdobeX, but he refused to print anything from Firefox, not even a selection. I deleted and I went back to 9.4, but it STILL will not print for me more. How can I fix it?

  OK, I got it - it turns out that the upgrade has changed the default printer in the settingds for Firefox... I won't go back to 9 or X however, as others seem to have hurt, too.

  FIXED - FIXED - FIXED

• HP laptop, 2000 - 2a20CA: Page of the screen shrinks by using the cursor key

  Laptop HP 2000-2a20CA

  No. B5R61UA

  It seems the upgrade from Win 7 to win 10 Home edition, in navigation or by using a Microsoft Office program, the windows Explorer.

  When you move the cursor with the touchpad and then listen to select a link, function etc. anywhere on the screen/page.

  The screen will decrease in size to the left or right of the screen or reduce to the taskbar.

  Clues, there is problem Win 10 or touchpad.

  HP 2000-2a20CA, running Windows 10 laptop

  Thank you

  I think I solved the problem because now I think.

  To check the HP site looking for updates to Win 10 and none were found.

  But then I changed my version of Windows to win 8 then rechecked updates and there is an update for the touchpad dated March 2016.

  Downloaded and installed, and everything seems OK so far.

  Thanks again.

• Laptop screen turns off during a rotation to 90 degrees. OK, less than 90.

  The laptop screen will be empty to a blank screen when the screen is rotated about 90 degrres or more. (a ususal viewing angle)  If the sc reen turned 30 degrees, the laptop works very well and the screen is fine. Unfortuantely I can't work with the screen almost completely closed.  Microcenter computer says it is the logic board but the problem seems so mechanical in nature.  MAchine works fine otherwise. Logic board of expensive repair for a 4 year old laptop. Any suggestions or ideas.

  Replacement of the resolved display cable problem

• Laptop screen disabled when connecting to a projector

  Original title:

  Hello, I am trying to connect to a projector Acer H5360 to my computer dv9750 Pavilion laptop under Vista Home Premium using an HDMI cable.

  Whenever I connect the projector, or noting happens and typing FN + F4 I can have my proposed office or automatically after a certain time, my office is planned (without typing anything). In both cases, the office disappears from the screen of my laptop (!)
  The only way to have my laptop active screen is again by disconnecting the HDMI cable AND it's not completely deterministic: it happens that the laptop screen remains inactive after extraction of the HDMI connector and until the power is cycled
  My question is how can I configure the system to always reflect the tower to the projector screen, whenever the projector is attached, while leaving the tower still active screen? before, during and after the setting of the projector.
  I would add only that I did not imagine it's be so complicated to just fix a projector. For example, when I move the same projector with the same cable to my xoom Tablet I just see projected! without doing anything more than the * physical connection *.

  How many times do you have to press the key combination?

  FN + F4 key combination is to switch between monitors. Try pressing the fn + f4 several times until you get show both monitors ON.

  When the monitor of the laptop is turned OFF and the projector is on, press the key combination, the projector must be OFF and the monitor of the laptop must be turned on. By pressing the key combination twice turns the laptop screen and the projector. There should be no instance that both will turn OFF.

  If it does not try to activate your dual display:
  Right click on the desktop-> Output To-> Intel Dual Display Clone-> notebook + monitor. It can vary in defense on your installation, I use a laptop HP and Acer LCD as a second monitor.

  Multiple monitors: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/multiple-monitors-frequently-asked-questions