my laptop Windows 8 does not illuminate

Similar Questions

• Windows Defender does not illuminate

  Windows Defender does not illuminate

  Windows Defender does not illuminate

  Just to add to what had been said...

  If you have the following AV, antivirus, programs installed, close your Windows Defender. Purpose of these AVs have their own advocates. 2 defenders on the same machine will create conflicts.
  Bottom line: it's ok. It's normal.
  List of AVs which will stop Windows Defender:

  Norton
  McAfee
  AVG
  Microsoft Security Essentials

  If you have no meanings, here's a way to reboot your Windows Defender:

  Start button > in the search box, typeServices > press the Enter key > scroll to find Windows Defender, click on it >...
  topic status , it must be said... Has begun
  under Startup Type, it must be said... Automatic
  If it does not say that, right click on Windows Defender > click Properties > in the new window, make the necessary changes, as above > click OK when finished.

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• my windows Defender does not illuminate when I click on

  my windows Defender does not illuminate

  What other security programs you have running? Many as MSE, Norton, McAfee, AVG, etc., will stop Windows Defender because they have the same functionality, and having two programs running at the same time and make security the same work can lead to conflicts. This is by design and must be accepted by the user.

• Error code: 0x800704ec: windows Defender does not illuminate

  original title: Error Code: 0x800704ec

  Windows Defender does not illuminate

  The error means, that the Defender has been blocked by group policy.

  Find out about group policies for Defender entries:

  http://support.Microsoft.com/kb/927367

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Windows Defender does not illuminate. Error code: 0x800705b4

  I did a search for the above-no error code came not upward with anything.  My computer is doing a complete analysis of Microsoft Security Essentials, yet Windows Defender does not illuminate.  This is for Windows 7-64 bit.

  Frank C.

  Hi Frank - Welcome to Microsoft Answers community.

  Check the following threads:
  http://social.technet.Microsoft.com/forums/en/w7itprosecurity/thread/f2ad10c9-203A-40E8-8d96-b4e88394387d
  http://social.technet.Microsoft.com/forums/en/winservergen/thread/2d5360db-BC6D-4B55-8983-54aa1c7486db
  http://social.technet.Microsoft.com/forums/en/winservergen/thread/108f7171-5a91-41d7-96c7-488d6311fe98
  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/b4d088ba-33C1-4177-90d7-f57ecd395763
  http://social.answers.Microsoft.com/forums/en-us/msescan/thread/355d53fd-7ac6-4B6E-926f-9473e23279cd

  I hope this helps...

  Best regards
  Nathalie Itknowledge24.com

• surcurity essentials does not start, and the windows firewall does not illuminate

  Hello

  I have a problem, he seems to have had a virus on my pc. Essentials of security does not illuminate and the windows firewall will not also turn on, I tried to use the tool to "fix" windows and it doesn't solve the problem.

  the original virus seemed to rename its self as a program existing and renamed the oringinal by a space in the name, for example "adobearm.exe" became "adobearm .exe" there is a space before the dot.

  The virus called his free adobearm.exe icon because it is a yellow / orange with a letter H, at the Center

  different file name her seemed to be part of the virus included "ag7yl5x8.exe".

  If you tried to close them in the task manager that they just either came back or a different file name would appear in the list.

  I also couldn't do a windows update, but I think as the tool to 'fix' as cured this problem.

  Can someone help me please.

  Thank you

  PS can't do a restore either

  I start here, THEN difficulty any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.

• Windows Defender does not illuminate at programmed times

  I'm using XP Home Edition. I followed the download instructions, but it does not illuminate at the regular time. Can anyone help?

  Hello

  · The computer is on when you have planned the analysis?

  Check is it y of error codes and error message appears in Event Viewer: how to view and manage the event logs in Event Viewer in Windows XP: http://support.microsoft.com/kb/308427

  1. online virus scanner and check if any malware or virus detected on the computer activity. You can run the scan for viruses online from the link below: http://www.microsoft.com/security/scanner/

  2. you can also check out the link below: Troubleshooting Windows Defender: http://support.microsoft.com/kb/555957

• Windows Vista does not illuminate

  Hello

  My computer does not illuminate. I have a Dell XPS M1530 with Windows Vista. The problem started yesterday when I left my computer unplugged. When I got home, the screen was blank and I just assumed it was gone to sleep. I pressed the power button and the power light turned on for a brief moment, and then turns off again. Then I turned off the computer by pressing the power button. When I tried to turn on the computer again, the lights on top of my computer, such as A / V controls, enlightened to the mode of the normal sequence, the player makes the usual click and the power button lights up for a short while before leaving. The computer turns on then with the fan running and the little power on the front (not the power indicator main on top), but light a screen empty. Thanks to all this, the screen remains empty, including turning point works manually.

  By pressing the power button when the computer is turned on gives the same result as the first time, where the main power light on the power button lights up briefly, then turns off again without result. Pressing F8 when starting the computer also does not work. I don't know how I'm supposed to solve this problem, the screen never showed any activity during all this. Help please!

  I should note that when I turn on the computer, it would seem she's asleep sleep and rest, as the little light on the front of the computer and the fan turns slightly, while the power led is off.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  It seems you might have a hardware failure, as nothing is displayed on your screen at any time after power on.

  If under warranty, contact the manufacturer of your computer.

  If not under warranty, contact a local and trusted computer repair Shop (not a type of chain stores to the repair facility).

  See you soon.

  Mick Murphy - Microsoft partner

• When I start my pc, windows vista does not illuminate. I can push Central/alt/delete, I can get online, but I can't always access any of my windows files or even a button or a task start bar.

  When I start my computer windows vista pc does not illuminate, I do not have access to my files or tools

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Defender 0x800106a windows error does not illuminate

  Windows defender does not turn, removed Mcafee 5 years absolutely silly

  It is not fair to McAfee.

  If you have Microsoft Security Essentials, AVG, McAfee, Norton, etc. installed, they have a conflict with Windows Defender, or turn it off.

  Microsoft Security Essentials has its own integrated version of the defender and it automatically disables the version of Vista in Windows Defender.

  If it's not:

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Defender-on-or-off

  Turn Windows Defender on or off the information on the link above of Microsoft.

  Hope the above explains the common compatibility issues with Windows Defender and other security programs.

  See you soon.

  Mick Murphy - Microsoft partner

• my computer hp laptop Pavilion dv6800 does not illuminate

  My hp Pavilion dv6800 does not illuminate

  Try a hard reset, works sometimes. Disconnect all external devices first.

  battery and power cord 1 / removal

  2 - Press the power button for 30 seconds

  3 reinstall only the power cord for the first start.

  4. turn on

• Computer laptop Windows XP does not start.

  My laptop does not start. When I first put it on the screen says 'we apologize... ". Windows does not start automatically in... "Then the Windows XP screen as it tries to load there is this small blue screen that appears a second microphone, too fast to read, then goes back to 'we apologize...". "screen just keeps looping. I thought that my hard drive was going badly, so I ordered a new. I have XP SP3. Could someone help me please?

  Hi robestes3,

  1. When did you start to question?

  2. you remember to make changes to the computer before this problem?

  Method 1:

  First of all, you can tryLast good known Configuration and check if helps solve the problem.

  Check out the link:

  How to start your computer by using last good known Windows XP Configuration

  http://support.Microsoft.com/kb/307852

  Method 2:

  Step 1:

  If the above method does not work, then you can try to start in safe mode and check if the problem occurs.

  Check out the link for more information on starting your computer in SafeMode below:

  http://support.Microsoft.com/kb/315222

  Step 2:

  If you can boot into safe mode without any problem, and then try to perform a clean boot. A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  http://support.Microsoft.com/kb/310353

  If your problem is resolved after the clean boot, and then follow the steps mentioned in the article above to refine the exact source:

  In addition, after you resolve the problem, see the section on how to restore your computer to a Normal startup mode.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Computer HP laptop window vista does not load please help

  someone asked this question and I have the same problem!

  I have a laptop HP who have dirtied pre-installed Vista and for some reason after installing automatically 3 updates the other day, he is not now charge up. The laptop is plugged in so it can configure 3 updates without failure (due to something like battery dying).

  When the laptop turns on, it gives me two options:
  • Start the reboot system (recommended)
  • Start Windows normally

  If I click on 'Launch Startup Repair', he comes back to do the same screen with them two options and when I click on "Start Windows normally", the laptop everything restarts and then return to this screen.

  Thus, F8-ing it does not help either - it gives me options like computer repair, Mode safe mode, last known good, etc... but none of these helped either.

  I looked around online for a solution, but most say on the use of the Vista installation CD, but the operating system is installed on a partition on the laptop (also there are files on what I would come down)... However I do not know if I can get it to boot on the installation partition either

  I tried F8, F11, F12 and nothing works

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  See you soon.

  Mick Murphy - Microsoft partner

• Click on the touchpad of my toshiba laptop windows 7 does not work.

  I'm managing with the two keys supplied click click of my touchpad suddenly stopped working... But not the touchpad click.
  I don't know why? It's never happened before... I have windows 7 on my laptop Toshiba L505-S5990. Please help me in this

  First, go to control panel, mouse and check the settings.  Experience if you wish because it does no harm.

  If the settings are correct, but the computer does not correctly, go to configuration panel, devices Manager and look at mose settings here.  Maybe there was an update driver - try to roll back driver or search for a better driver.

  Look for the manufacturer of your site support & forums to see if new drivers are available, or if someone else has solved the problem already.

  If none of this works, close this post & open a new one with a list of all the controls, you did & what were the results.

• Computer laptop Windows 7 does not detect my Xbox 360

  Recently, I bought my used console. My laptop's overview of Windows 8 consumers. Although I didn't have the Media Center option, my Xbox could detect and stream my music, videos and photos from my PC. I've recently returned to Windows 7because the license of Windows 8 has been set to expire January 15. Now, for some reason unknown, my Xbox does not detect my PC or my PC detects my Xbox as an Extender in Media center. I tried everything I could think of and the instructions I found on the Xbox site, nothing done. Before I posted this, I also tried things left to people with similar problems in the answers in this forum. I tried manually assign the IP addresses of my two Xbox and PC, disabling my Windows and the firewall of the router, restart Windows Media Player sharing service, allowing the streaming on my Xbox which appeared in my streaming options, disconnect and reconnect my Xbox and PC on my network of countless times and shout and scream about the whole situation.

  I tried not to open the ports because that I have disabled any firewall that I don't see. I have McAfee installed, but my subscription has expired so I uninstalled. I am at a loss for what to do because I tried everything I read and thought. We have 4 PC in our House and everyone but mine my console can detect and disseminate. Three of the four run Windows 7 Home Premium x 64, the 4th with Vista 32 bit. All the computers are on the same network and all. I tried ping my Xbox to my PC and it timed out every time, but my PC does not detect it in a way because it shows in my options on my PC for streaming media. There must be something with my PC and Windows 7 only because like I said before, everything has worked at the time where it ran Windows 8. Anyone can end this madness?

  Never mind. I thought about it. I restarted the SSDP Discovery service that restarted the services necessary to make this work.