My macbook turns after that I said to turn off.
Hello, so directly to the question: so, after I ordered and installed a new AirPort/Bluetooth cable, since I managed to destroy the last of them, my macbook started acting weird, everytime I turn it off it turn itself back on.
I had the same problem when I didn't know I had destroyed my cable airport the only difference then was that the fan got pulled up.
So I'm sure it's the fault of cable from the airport.
So, what should I do? Is that all that I can enter the terminal or change any document .plist or whatever it is.
all that doesn't make me not cable airport whenever I want to turn my macbook pro power off.
Data sheet:
4 GB Ram DDR3
SSD
NVIDIA Geforce 320M
Intel core 2 duo 2.4 ghz processor
Appears you may need to buy the replacement suspected parts and also
While doing so, don't forget to get replacements for those nearby that can be
damaged during the attempt to get in front of them in order to correct the first fault.
Have you used a repair of ifixit guide, or a combination of youtube online and
Another DIY video? MacSales.com has some who does OK for the replacement of parts
and they are free to use. If you have a second computer to work, of course.
The probable cause is related to a hardware problem, if the situation began when
looking to replace parts. Not sure if a "fix" of command line is in order.
Preferences files can get somehow corrupted, but if you see data issues
There may be a related problem of logic in the computer.
Troubleshooting and diagnostics are more difficult once the device has been
additional probable damage related to a repair attempt earlier...
Sorry, I don't have any ideas to note; with the time around 01:30 here, I'm going offline.
Good luck in this case!
Tags: Notebooks
Similar Questions
-
Error msg "the serial number you entered is valid, but cannot find a product calling on this computer" appears. Impossible to reinstall CS5.5 on Macbook pro after the hard drive crashed and was changed.
Hello
Thank you for your response. I've finally managed to connect with a support staff through the online chat portal & advises him to download CS3 web premium. Tried to find it, but this option is not available in scrolling to the bottom of the box. Ultimately, the staff had to help me to unlock the CS5.5 update manually from its end. He indicated that, in my case, the situation could not be resolved through this method, and I'd still have to contact support via the portal chat staff to help unlock my CS5.5 If this problem occur again should I need to reinstall it on a new computer laptop.
-
HP Simple pass 2012 does not after that I said do not yet show message on my laptop dv6 series
HP Pavilion Dv6-6116us
Windows 7 64 bit
I recently got this new laptop. I've been infatuated with the simple pass feature. I used it for my facebook and gmail accounts. Unfortunately today, I pressed on the do not see the message box thought I would still be able to use it. However, I soon discovered, that I can't use simple past on my gmail account. I can always use it on my facebook account. It's really frustrating for me because I really liked the simple pass on my gmail account. I'm at a loss. I pressed on turn off and turn on the account of the simple pass program in 2012. I am very angry. Can someone help me please? I just want to use simple past on my gmai account again.
You will be OK!
- Start the program SimplePass
- Slide your fingerprints to open it
- Pass the 'show all' to the 'personal '.
- Find your webcard "gmail" and
- Right click on it
- Website of the Enable Log CHECK on
- Save
-
How can I start Photoshop CC after that CC said it is installed?
I just joined the creative cloud and the CC window wrote that I installed 5 Lightroom and Photoshop CC. There is a shortcut of Lightroom on my desk that seems to open the app (I'm new to Lightroom). However, there is no shortcut Photoshop CC. There IS a shortcut for creative cloud that only opens the window described in the first sentence. Help! I am running Windows 7 Professional, Service Pack 1.
Strange... Well, there must be an Adobe Photoshop file with the icon of the application appropriate in it somewhere in your programs folder. You know how and where to find that? You can then right-click this icon and create a shortcut on the desktop.
I wish that the application in the CC Panel Destop icons 'begin' applications, if present, of course. It would be very easy for them to do, I guess.
-
After that the effects window is off screen
My question is the same found here: CreativeCOW
But I'm on windows...
I tried to restart AE, but the window always off-screen...
No one can tell you anything without the proper system or other technical details info. Start by updating your graphic driver and check the setting of your screen, remove the AE preferences and reset the workspaces.
Mylenium
-
After that the facility asked me a serial number! I have received no serial number!
Hello, I downloaded the CC and Muse, on my Macbook Pro, after that install asked me a serial number! I have received no serial number! Just got a thank you email and explaining the first steps to take, but not the serial number and cannot ultilizar Adobe Muse! Already tried all of the alternatives that the site offers for troubleshooting and pages are always available!
Hello
As you confirmed Muse request the serial number at the launch. Most of the time this happens because of Hosts file on the computer.
Please go ahead and rename the hosts file on your computer and you should be all set. Here are the steps for MAC and Windows.
Windows:
1. navigate to the following location. C:\Windows\system32\drivers\etc
2. rename the "Hosts" file to "hostsold".
3 restart Muse and sign in using your Adobe ID, you should be all set.
MAC:
1. go in the Finder > go > go to folder
2. type / etc and press return
3 Rename the "Hosts" file to "hostsold".
4 restart Muse and sign with your Adobe ID, you should be all set.
Concerning
Vivek
-
I have xp sp3. When I turn it on, it lights up and then the screen stopped occasionally. and after that I cut the screen off, then on again, it turns on but the screen is sometimes alittle bit off. who is wrong?
Hello
1. don't you make changes to your computer, after which the issue started?
I suggest that you follow these steps and check to see if they help.
Step 1:
Update of your display drivers and check if this is useful.
Step 2:
Reinstall your display drivers, and check if that helps.
-
After that I went to El Capitan, my computer would be close and take forever to reboot. I took it to the Genuis Bar and they said it was us who extinguished the FileVault. I've updated the software on 1: 1 and now, I'm having the same problem again. The computer turns off and sometimes it takes me an hour or two to get started again. Help, please!
refer to this article and move forward with the NVRAM reset at the end.
Reset the management system (SCM) controller on your Mac - Apple Support
If the problem persists, how long have you made it Go?
I would bring out there, but first call Apple.
-
Hello
After installing something from windows update (about 300 MB in size) my computer start Startup Repair each time and said "a hard disk problem is preventing Windows from start" and turns off.
Then a window pops up saying "Startup Repair cannot repair this computer automatically.
The details of the problem say;
Problem event name: StartupRepairV2
Signature of the problem 01: AutoFailover
Signature of the problem 02: 6.0.6001.18000.6.0.6001.18000
Signature of the 04:65537 problem
Signature of the problem 05: unknown
Signature of the 06 problem: BadDisk
Signature of the 09 problem: unknown
Signature of the 10:1168 problemSystem Restore does nothing, and all the other tools of recovery. :(
Please help, it will be much apreciated :)
DOMIf you are sure that the problems began immediately after installing a Windows Update, use the free support of MS here:
Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates. MS - MVP - Elephant Boy computers - don't panic! -
Unable to turn on the window Defender, even after that I click on activate the defender of the window on my window vista home premium... The page with the tool does not appear...
If you have
one of the following AV, antivirus, programs installed, it will stop your
Windows Defender. Purpose of these AVs have their own advocates. 2 defenders
on the same machine will create conflicts.
Bottom line: it's ok.
It's normal.
List of AVs which will stop Windows DefenderNorton
McAfee
AVG
Microsoft Security
EssentialsIf you do not have the
above AV programs, here's how to do to restart Windows Defender:Start button > in the search box, type Services > press the Enter key > scroll to find Windows Defender, click on it >...
topic status , it must be said... Has begun
under Startup Type, it must be said... Automatic
If it does not say that, right click on Windows
Defender > click Properties > to
Startup type, click on the pointer to the right and select automatic
to the service status, click Start
Click OK when finished. -
After that update to EOS10 can not download the photos said all four phones on the account is locked
Can not download pictures from iphoto on home computer after that download EOS10 said that all 4 phones are locked
From information I have received, it seems that your iPhones have not been approved by our computer. If this is the case, plug in your iPhone to your computer and open it. A message of trust or not trust the computer should appear, then press trust. If not, please tell me which version of Mac OS X / Mac OS, you are running, and if EOS10 means iOS10.
-
Satellite M200 screen turns off after that start & battery does not charge
Hello, I am from Jakarta, Indonesia
I have a problem with my Toshiba Satellite M200 Notebook (running Windows 7 Home Premium)After I press the power button to the top of my laptop, it works fine display BIOS and Windows startup screen.
but after that my monitor off all of a sudden when Windows is supposed to show the login screen.Sometimes, the monitor doesn't turn off, but shows a lower resolution (I don't know exactly what resolution, 1024 x 768 or 800 x 600, i use maybe 1280 x 800)
so the only thing I can do is, press the power button to stop bad then press power again turns on, my monitor works normally
try to stop and then turn on again in a few hours later, problems still comes once.from the moment where I install Windows 7, I use 8.15.10.1930 version of the driver (downloaded from Download Center of Intel, which included Assistant TV Intel)
2 days ago, my friend told me that I should install the driver from the Toshiba site support, so I went to csd.toshiba.com and download the 8.15.10.1825 version of this site (which is not included Assistant TV Intel)my monitor works normally after I installed the driver I of csd.toshiba.com, so I think that the problem because the Intel TV Wizard somehow messed with my laptop. But this morning this problem once again, my turns just monitor suddenly...
In addition, this problem seems to be my battery was unable to recharge, my completely reloaded Windows shows, but when I plugged my AC adapter,
There are 15-20 minutes before my laptop turns off automaticallyThree months ago, I just brought my laptop to the local Service Center of Toshiba and bought the new motherboard to replace my old mobo (which have a VGA problem too!)
Is there something I can do (related to Windows or driver/software) or I can bring my notebook at the center of service again?
are they somehow an incorrect wiring when replacing my motherboard?
and am I need to replace my battery too?I use this laptop for about a year and a half and there is nothing wrong with my battery before replacing the motherboard
any help would be appreciated :D
Hello
Talk about your screen, the a graphics driver causes this malfunction with resolution and turn off. Go to the page of the toshiba driver and download the correct Vga driver for your model. I see, you are running Windows 7, if there is no driver for win7, try the vista driver.
On your power supply, you have used for the year and a half and he is released in 20 minutes, there is nothing strange. It's standard for power supply operating period, need to be replaced. Just to be sure, you can check with a new battery. You will see that the trick works as expected.Welcome them
-
After that installation of 9.3 iPad will not activate, it has been restored, but still not turn on. The first owner does not know the password
And this is not recognitze by any device, computer or iPhone 6plus.
If you or the original owner did not have the password no one here or at Apple can help you.
-
Satellite M70 - 340 - the screen turns black after that charge BIOS
Satellite M70 - 340 screen turns black after that BIOS loaded. Please help
Hi Totius,
This means after the Toshiba BIOS screen, nothing happens or you tried upgrading the BIOS? Maybe you can explain that it still a little more detail.
The problem is in this case you can t a lot because this problem of material based on s.
You can try to remove the battery and the AC adapter at least an hour. Then connect the two devices again and try to start your laptop.
-
Satellite L450D monitor wouldn't turn on after that laptop turned on all night.
Hi guys,.
Just a quick query... I just left my laptop computer on all night, the monitor is set to turn off the display after 5 minutes of inactivity. When I tried to go back on this morning the display will not turn back... I had to stop the pc with the power button.
Is this a common problem? Is there a way I can avoid this in the future?
Thank you very much.
Hello
Maybe you could avoid such symptoms may in the future by upgrading the graphics card and BIOS update driver.
I read in the forum that some people had this similar problem but they show pilot helpSee you soon
Maybe you are looking for
-
How does one get rid of a notification of unread email on IPhone when all messages have been read? It seems to be a common problem, and I solved once before, but don't remember how to do it.
-
Someone met by these two on the F55 error codes?They blink in a sequence and the tally light is pulsedirregularly. The body is no longer produced the HD - SDI on each hand or underwater.The viewfinder image is fine. Documents but not read.Do you have
-
I'm using a 1N4148 as a temperature sensor in a circuit of the thermostat (reverse engineering). I want to manually to set the temperature of ONLY a component of the circuit, either in the simulation is running, or default between simulation runs.
-
E280 plugged into a USB port may be bad and it fried my sansa?
Hello everyone, this is perhaps my last posting! I am so sad and upset: I just plugged my V1 e280 on a friends computer using a sandisk connector cable I got free on a freebox (variable n ° 1) and plugged into the front USB port (variable n ° 2); He
-
Uninstall and reinstall vista and drivers etx
Impossible to uninstall and reinstall vista