My printer is on but does not

Similar Questions

• HP 5400 printer light blinks, but does not print

  HP 5400 printer light blinks, but does not print

  Hello theguttu,

  We will try to uninstall then reinstall the printer in a specific way:

  1. remove the printer from the PC.

  2 uninstall the printer from the PC driver.

  3 reinstall the printer driver with the latest version of the Brother's Web site.

  4 reinstall the printer.

  Also, here are some references of printer:

  Open the printer Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Find and install printer drivers

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  Best regards

  Matthew_Ha

• Software for printer C410 starts but does not load.

  Software for printer C410 starts but does not load.  Using Windows 7 Home Premium SP1 on a Pavilion HPE-140f. Click on install and the process starts, goes in all the scans and the two notations. When I click on load it just goes dead and will not charge.

  Try to run the installation once more

  Once to reach the license not agree, click on the link 2 (use of connection Internet

  Make sure that both options are defined as no, thank you, approve and proceed with the installation

  You see no progress

  If the same appears, please specify whar you are which means by "going dead" - is there a specific error message?

  Specify as detailed as possible, a screenshot can help to understand better as well.

• printer says 'ready', but does not print.

  After changing the ink cart, HP OfficeJet 4500 wireless printer, it says ready, but does not print. I have to align the cart as he said, it print a test page, all in black and white and color (maybe that's the problem, but I have JUST NOW put a nude color cart in). WHATS WRONG PRINTER W / THIS.

  Hello

  You can make a color copy?

  Are receive you error messages about the color cartridge?

• Dell 944 printer to copy and print very well, but does not scan

  Original title: Dell 944 printer

  My printer will copy and print, but will not scan.  We have recently received a new computer and downloaded all the updates.  I can't understand why I can print and copy but will not scan.

  Rhonda

  Rhonda,

  You have the OCR program installed?

  In the digitization, if you have the disc that came with the printer, and then insert the floppy disk to the printer and keep it from running. Go to my computer and double-click it. Locate the drive that contains the disk Dell inside. Right-click on it, left click Explore. Find the folder of the OCR. In the OCR folder, there is a folder of Abbyy. Right click on setup.exe, which is located in the folder Abbyy and left, click Run as administrator. This will install the OCR program.

  Rick

• My designjet 430 printer shows ready but does not print troble shoot shows like loan

  I have a ploter deigns jet 430 I have not used for about a year, but I does not print. I got a new computer I put new ink printer it shows ready but I do not print or make noise but on my computer it shows as conspire, I hope someone can help

  Your first point of contact should be forums of HP.  Here you will find specific knowledge on HP printers.

• Network printer is recognized but does not command shared print

  Just installed update of XP on the computer desktop and Vista on the laptop.  Everything goes well on XP computer but the printer that is installed and set apart as before, will not print from the laptop.  This is a Photosmart HP 7160 and on my list of printers.  It shows that a doc is sent to the printer, but it will not and does not show in the queue.

  None of the "fixes" listed here or on the work of HP.

  Hi Marilynandav,

  Follow the steps below and check if that helps you.

  1. can you access files in the computer that is running Windows XP from the computer that is running Windows Vista? You must configure the first print settings.

  File and Printer Sharing in Windows Vista

  http://TechNet.Microsoft.com/en-us/library/bb727037.aspx#EFAA

  2. to connect to a shared printer on Windows Vista.

  1) click the Start button, and then in the search box, type \ followed by the name of the computer with the shared printer you want to use (for example, \\mylaptop).

  (2) press on enter.

  (3) If Windows can find the computer on the network, a folder is opened for the computer. Double-click Printers. If none of the shared printers connected to this computer, they will appear here. If you do not see the shared printer you want to use, ask a person who uses this computer if the printer is connected, turned on, and shared with other users on the network.

  4) double-click the printer. Windows will automatically add the printer to your computer and install the printer driver. When the process is complete, click Next.

  (5) the printer should appear in your printers folder. You can select this printer when you want to print a document or another file type.

  Note: If Windows can automatically find and install the printer driver that allows this shared printer to work with your computer, you must install the driver before you will be able to print.

  (1) download the Windows Vista compatible driver from the HP website and check:

  (2) remove the existing printer driver and reinstall it.

  Remove the printer

  ==============

  (a) click on the "Start" button, type PRINTERS in the start search box and press ENTER.

  (b) find the icons that are related to Dell photo924, and delete them.

  (c) right-click on the blank part of the window and choose "Run as Administrator"-> "Server Properties".

  (d) the tab drivers, select the printer that is listed and click Remove. Please, select Remove driver and driver package.

  (e) open the start menu, enter APPWIZ. CPL in the search box and press ENTER to launch the "programs and features".

  (f) try to remove all related printer software.

  (g) reinstall the latest driver.

  After installing the driver, please follow the steps below

  Add a shared printer

  ====================

  (a) click Start, click Control Panel and double-click Printers.

  (b) on the keyboard, press Alt, and then click the file-> run as administrator-> add printer.

  When the UAC window appears, click on continue to go.

  (c) select "add a local printer.

  (d) select "create a new port". Select "Local Port" as the port type.

  (e) in the "Enter a port name" box, type the address in the following format.

  \\[IP address of the host computer]------[the share name of the printer]

  (f) and then click Next.

  (g) follow the instructions to complete the installation. During the installation, choose the driver in the list of drivers.

  3. try to connect the printer to the Windows Vista-based computer directly and see if it prints normally.

  Thank you, and in what concerns:
  Swathi B - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem HP 1200 inkjet - printing is listed, but does not print

  My HP psc 1215 all-in-one prints jobs even if they are present in print lists:

  • Reinstall HP printer and troubleshooting in Windows 7 software (updated drivers) the situation has changed...
  • It shows a 2nd icon HP psc 1200 series, which shows a warning sign which does not disappear after troubleshooting, but using it I can at least to analyze something and import them into my documents folder.

  Kindly help
  DAE

  This model is not supported under win7, by HP, so any HP printing software would not work.

  The driver is obtained via windows update.

  If the devices and printers display 2 * series PSC, uninstall them two, reboot, reinstall the printer

  http://h10025.www1.HP.com/ewfrf/WC/document?docname=c01796879&CC=UK&DLC=en&LC=en&os=4062&Product=412187&sw_lang=

• Network printer is detected but does not install.

  I just bought a netbook Windows 7 Starter (32 bit) running, and I try to install my printer HP OfficeJet L7555 using the download of OJProL7X00_Full_14 (wired) network.

  My printer is detected on my network, and everything that looks like it installs fine and then he gives me a big red X and tell me that it can not install the printer at the moment, but it can put an icon 'Add a device' on my desk. I have done this and have since tried to use it with no luck.

  I disabled my firewall and antivirus but still no luck.

  Can someone help me?

  Fixed.  What a pain after several months.  After reflection, why I had two computers that work with wireless and two did not, the only difference I could think between them is the two who did not had fresh reinstall of Windows 7 x 64 while the other two have been underway for more than a year.  Made me think of one of the updates, possibly Win 7 SP1 may be the culprit.

  So I reinstalled Windows once again on one of the two who stopped at 50% of the HP 7780 install.  This time, however, I loaded only base Win 7 x 64 and different chipset, audio, video, LAN etc drivers.  I've left no WIndows updates occur.  Then I installed the last Full Version 14 software 7780.  Worked like a champ - found my wireless printer (which he always did) and then continued installation beyond 50% up to the end.  Once done, I'm done load all the updates for WIndows and other software like Office, Nero, games, etc.  Still works.  He worked on the other computer problem as well.

  Load the HP software before you let Windows updates occur.

  Good luck!

• OfficeJet J6450 - printer connects wireless but does not print job cable modem replacement

  Material: My printer is an OfficeJet J6450. I am running Windows Vista, current update.

  Probably triggering the event: I replaced my modem docsis 3.0 with a doscis 2.0 modem. PSI has remained the same. All other software and firewall remained the same.

  Dysfunction: After the replacement of cable modem, I found that I could print is no longer in my HP OfficeJet 6450. I would get an error in the printer window ' error - print. "  After the reboot after the publication of the initial error, I would get the error "error - sent to the printer.

  What I did:

  As a first step, I've uninstalled and reinstalled the HP software for the printer (complete package with exception of PhotoSmart and HP customer monitoring program).

  Use the connection for the network printer wizard, I entered the router password wireless to the printer. At first I don't have a connection. Then I rebooted the computer and the printer. I also returned to the default setting of network on the printer and repeated the configuration of the network. The connection was finally successful.

  The automatic test of the network page and the network printer wizard confirms the connection. Digital display of the printer and the HP diagnostic utility has also confirmed the connection. But the diagnostic utility is unable to print a test page and throw an error - "Print Test failed.

  The result disappointing:  I still can't anything to print wireless.

  ... Thanks in advance for your suggestions to get my printer back on...

  Go to start > Control Panel > printers and delete all instances of the printer.

  Then re-add the printer:

  1. make sure the printer is on and connected to your network. Verify that you can access the printer's internal web page by accessing its IP address before continuing.  Get IP address of a Test of Netowork wireless on the front of the printer (usually in the network menu).
  2. click on > start > Control Panel > printers.
  3. click on add a printer
  4. Select local printer
  5. Select create a new port and select Standard TCP/IP Port, and click Next.
  6. under device type, select TCP/IP Device. Under the name of host or IP address, enter the IP address of the printer. Click Next.
  7. Select Hewlett-Packard in the list of manufacturers and select and select your printer model. Click Next.
  If your printer model is not in the list, then select disk provided, browse the CD that came with your HP printer and select the first file begins with hp and ending with INF. click Open, then OK. Select your printer model. Click Next.
  8. If prompted, use the driver that is currently installed.
  9. He will ask the name of the printer - enter a new name or use the one existing. This will be the name of the printer that you select from other applications.
  10. we may ask you to share the printer. Choose No.
  11. the printing area of Test Page is displayed. Go ahead and print it out.
  12. click on finish.

• C309a Photosmart AIO prints ok wireless but does not havea analysis option

  I have installed, reinstalled, have chess 3 and level 4 uninstall many for = imes and cannot get the scan to work function unless I connect the printer using a USB cable.

  I created a static IP 192.168.0.6 and this works well for wireless printing.

  The wireless network test report shows the connection to 192.168.0.6 with an excellent signal strength.

  All categories in the summary of tests show 'pass' and no other network detected.

  The router is open, without passwords or encryption.

  I disabled my firewall/protection virus on the pc and the router. (even if it prints ok wireless)

  The computer is a HP Envy23 touch

  The operating system is Windows 8.1 update

  In addition, the HP solution Center fails to install.

  I did a "factory reset" on the printer.

  It drives me CRAZY!

  Can anyone offer a solution?

  Finally fixed!

  If someone elsehas this problem, here is what worked for me.

  Run the uninstall of level 3

  remove all the Photosmart left of files in C:\program files (x 86)

  Open regedit, find and delete all entries "Photosmart".

  run cCleaner registry cleaner twice

  reset

  If the network check out is enabled, you will find the printer listed under "devices and printers".

  run print and scan doctor and let it download and install the software.

  I hope that someone help avoid pain inflicted by is not HP do a correct uninstallation.

• Smart printing is installed but does not work

  House smart printing using Windows XP with IE7 is installed with the Bing toolbar.  I don't get any errors, but the selection change or allow me to select the element to clip.

  Hi, I see that you made this post some time ago, but no one answered, the problem is now resolved?

• I want to use the print SCREEN key, but does not work.

  Using Vista, I want to activate my key on my keyboard screenshot to capture what I have on my screen at the same time.  When I press it, nothing happens.  Is there something that I need to program to operate?

  You must stick somewhere after you press the button.

  http://www.SeoConsultants.com/Windows/print-screen/

  Often abbreviated Prt Scr, print screen key is a useful key supported by most of the PC. On the BACK, by pressing the print screen key causes the computer to send some images and text are currently on the screen to the printer. Some graphics programs and Windows, use the print screen button to get screenshots.

  Now, how to see the screenshots or maybe even send them to someone? The fastest and most effective method is to have a practical graphic editing program. If this isn't an option, you can open your favorite word processing program and create a new document. Place your cursorat the beginning of the document, or wherever you want the screenshot to appear.

  Using your keyboard, press Ctrl + V which will Paste the screenshot in your open document

  http://graphicssoft.about.com/cs/General/HT/winscreenshot.htm

  How to capture a screenshot of your desktop or window Active in Windows

  http://www.ibiblio.org/virtualcell/Tutor1/TandR/PrtScr.html

  http://www.ehow.com/how_4682072_use-print-screen-laptop.html

  How to use the print on your laptop screen

  See you soon.

  Mick Murphy - Microsoft partner

• KODAK AiO ESP3 printer is detected but does not print

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

  Make sure that it is Vista Compatible and that you have the latest Vista driver for the installed model Kodak. :

  http://www.kodak.com/eknec/PageQuerier.jhtml?PQ-path=7895&PQ-locale=en_US

  Uninstall/reinstall, directed by Kodak.

  See you soon.

  Mick Murphy - Microsoft partner

• HP Officejet 6500 a E710n-z: HP 6500 printer scanner prints but does not scan

  Since my OS has been upgraded to Windows 8.1 the printer scanner prints (very slowly) but does not scan!

  I tried HP Print and Scan doctor, he worked once (clumsily) but not since. I tried Windows ' whatener it is called "but nothing.  It was working perfectly since I the printer scanner.   Now I don't NOTHING DO let's me scan.  and the fix message tells me that my WPA security password is not quite valid (nothing has changed here!)

  I checked the internet, it seems that a lot of people have the same problem.  I don't know if anyone has fixed it.  The so-called solutions are not very easy to follow!  Just as they do not work.

  Thank you X-23, I'll ty that when I have a little more time.

  Dziadz