My printer, which is connected through WEP, is "not responding".

Similar Questions

• Printer maybe Setup connects through USB and wireless printing? or either one or the other?

  I would like to connect my printer to the since my MAC using a USB cable and also be able to use the wireless printing functionality without having to reconfigure my printer.  Is this possible?

  I have a Photosmart 7520

  Hello

  All my tests were using Windows, but I think we can do it for Windows why not Mac. It takes config of the printer as a wireless printer (IE to connect to a network) and install drivers, or applications on OTHER computers and mobile devices.

  Kind regards.

• Satellite Pro C870-1E2 - internet connection problem Proxy Server not responding

  My old Toshiba computer connects to the internet via a numbered port,
  yet my new Toshiba Satellite Pro C870 1E2 connects to the internet through a proxy server.

  Why I ask because this morning when I started, I was unable to connect to the internet and all that appeared on the screen was the message "Proxy Server not responding."

  When I tried the old computer connected instantly he had to wait a long period of time before that the "proxy" got it's act together.

  Advice please?

  > Why I ask because this morning when I started, I was unable to connect to the internet and all that appeared on the screen was the message "Proxy Server not responding."

  And why you think you ve you have a problem with the Satellite laptop? I understand the original message: the Satellite acts as client.
  In my eyes there is a problem with the proxy server, and this should be checked first.
  Its almost impossible to tell which could affect the proxy, but as a first step, a reboot would be desirable.

• Can't connect, connection startup screen will not respond to mouse clicks or keyboard

  I do not have a DVD to boot from. I use a laptop (Acer Aspire 5610). The keyboard and mouse are internal.  Any suggestions at all? I tried the Safe Mode, Mode safe mode with guests hoping to type rstrul.exe, but never had the guest. He went directly to the display of connection with my daughter and my icons. I have added no new material.

  Separated from the:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/cant-login-login-splash-screen-will-not-respond-to/54da4727-b98c-436a-8D82-f31c3355f5fd

  Have you shot inadvertently carpet of mouse/keyboard. This can happen through the Fn key on some laptop models. Find the picture on the key Fn, should give a clue.

  You can borrow or buy a usb KB and mouse that you would at least pass by troubleshooting?

  Tricky

• My printer which is connected to a home group to not communicate with the computer laptop and Netgear is not connected to my computer

  Original title: 305 lemark printer s device

  My printer will stillnot communicate with the laptop.  It is in the homegroup?  Help

  In addition, my netgear will not or connect to my computer?

  Thanks in advance for your help

  Gary

  Hi Gary,

  1 have you ever done any recent hardware or exchange of software on your computer before the show?

  2. you receive an error code or message?

  Please follow the methods and mark the question below:

  Method 1:

  Using the troubleshooter from network in Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  Open the troubleshooter group living:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-HomeGroup-Troubleshooter

  Method 3:

  Wi - Fi and in Windows network connection issues:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  I hope this helps.

• Run the game as administrator, which causes my software logitech setpoint not responding.

  OK, there are a few games that I can play if I run as administrator.  I wish I could just run them without any problem.  Secondly, when I play my games (run as admin) my setpoint software for my mouse Logitech G5 no longer works and my settings for my mouse do not work as they are supposed to set.  I also use Ventrilo voice server to communicate with my friends, which complicates things more.  I found the following will work, but it is RIDICULOUS that I have to do this.
  1] game as administrator, then out of alt - tab on the desktop.
  [2] run ventrilo as administrator, and then alt - tab out to the desktop.
  [3] then run set as administrator, and then alt - tab back to the game.
  everything works as before in winxp at this stage.  but it's crazy that I have to do this if I want to play my games!  First of all, I don't understand why I have to run the game as administrator all the time... I am completely convinced my games.  Second, point to load at startup of windows7, so when I want to play my game, I have to close the set point and follow the procedure above.

  Help!

  Yes, it's the right thing to do for Windows 7. Step 2 described by Shinmila H. is for Windows Vista. UAC has changed and the 'use access control user (UAC) to help protect your computer"option no longer exists in 7.

  Also, if you want to keep UAC, you may be able to bypass your problem by changing the setpoint utility and Ventrilo administrator automatically mode point.

  (1) open the start menu, click all programs, go to the startup folder to locate the shortcut of Logitech Setpoint

  (2) right click on the shortcut, click Properties and click the Compatibility tab, then check the box "Run as Administrator".

  (3) locate your Ventrilo shortcut or executable and do the same (right click ==> compatibility ==> run as administrator).

  (3) restoration UAC return the cursor to the top one or two notches, and then restart the computer and check if everything works

  My guess is that any game that you run in administrator mode will refuse the entry of any software that does not have the same privileges. The trick above works for me with the set point, but I'm not sure of Ventrilo (do not use).

  Step 2 and 3 above just automatically happen that you perform with ALT-tab on the office.

  Otherwise if you don't care about having UAC, just keep this option disabled.

• When I download pureplay poker. Then go to play gets throughout the connection then freezes says not responding do not

  I found a great poker site play a lot on the site, but it downloaded version freezes when I try to play keep getting does not

  Hello
   
   
  1. when the game freezes? Is it immediately when you start playing or are - this random?
   
  It is possible that a third-party application may conflict with this game. Try to play the game in the State of clean boot and check if it works.
  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• C4580 - error when setting up connect through WiFi w / Time Capsule

  I used my C4580 to print and scann with wireless in the past, a Netgear WiFi router with a DLink WiFi router.  I recently started using a Time Capsule from Apple as my WiFi router.  I have two active groups, so I have a 2.4 GHz signal and a 5 GHz signal available for my wireless products to connect to.  All the other products I use (a MacBook Pro running OS X Lion, an iMac running OS X Lion, a CPU HP running Windows XP, a CPU Dell running Windows 7, a Fujitsu laptop running Windows Vista, Apple TV, an iPhone, and an HTC Evo a TiVo set - top box) are able to connect to one or the other of these signals of network without problem.

  Here's what's happening with the C4580:

  1. I plug my C4580 on my MacBook Pro via USB.

  2. I open the HP installation wizard.

  3. in the first part of the "Setup" section, I select my "Photosmart C4500 series", which shows as connected via 'USB '.

  4. in the second part of the topic "Setup", I check the box "configure yoru device to a wireless network.

  5. in the third part of the "Setup" section, my 5 GHz network is not displayed.  My 2.4 GHz network appears, by dint of complete signal, showing the encryption 'WPA_PSK' and 'Infrastructure' mode  I select this option.

  6. After about two minutes, during which the Setup Wizard probably tries to connect the C4580 to the WiFi network, I get the following error message: "* device not connected * to configure the network settings for the selected device, please temporarily connect it via the USB port.  The device can be disconnected from the USB once the network settings are transferred. »

  Note: Throughout this process, my C4500 WAS connected to my MacBook Pro via USB.

  Question: What other steps should I take to solve this problem?

  Thanks for your time.

  First time that I posted on a forum techy, bt I get a lot of help from them, then it's time to spread the love.

  In any case, I was struck by our similar problems were, we have exactly the same set up and the same current. I've been hitting my head against a brick wall for a whole afternoon. Your temporary solution lead me to a very simple implementation and a more permanent solution.

  Your normal home network have an apostrophe or special characters, such as YourName Wi - Fi network?

  I had two networks put in place (already had a network of comments) called W - Fi Latitude and comments Latitude travel network travel network.

  On your advice I tried to use my Gust netowrk. Oddly, when he showed up on the list, it lacked the apostrophe (the other network was not missing the apostrophe). When I tried to click on it, it said that there was not. I tried to type the name in its entirety in the box 'Other networks' and I was able to connect, but the software insisted that even if the printer is now connected, the MacBook was not (even though it was clearly).

  The anomaly has led me to believe that the HP Softare along with apostrophes, I went to the airport and renamed the two networks with apostrophes. I gave the private network a go, and voila, everything went well.

  It is a lesson in how to make a long story short. Basically, to remove the apostrophes in your network name in the airport and then try again.

• HP Photosmart more B210: printer HP B210 connected to the computer with windows vista is not print documents

  Have had the above printer and computer wireless without any significant problems of printing until yesterday when I couldn't print liked anything from my computer. I disconnected the son / the power of my printer and router, waiting a few minutes and then reconnected the accounts.  Then I restarted my computer and retries impression with unsuccessful results. I then run the wireless network Test and the report does not show any problem.  Anyone have any suggestions to solve this problem.

  Thank you

  Hi @kattok001

  I see that you have had the minimum printing problem in the past, but suddenly you cannot print at all despite your efforts. I'd be happy to help you with this!

  Let's start our trip with HP print and Scan doctor. Printing HP and doctor Scan is a free utility (tool) that allows to quickly solve common printing, scanning and connectivity problems, including but not limited to:

   

• HP Officejet 7000 Wide Format: HP Officejet 7000 Wide Format Printer - E809a - loss of connection through router

  We have a problem get sustained response of our HP Officejet 7000 Wide Format Printer - E809a which is connected to the network wireless ethernet to a router Netgear cable.  We tried stripping on the software driver & uninstall of the printer of the registry, and then re-setup from latest downloads from the HP site.  It works, especially if the device is set as the default printer, but the printer greys out less than an hour in the device registry and the default value automatically resets to another printer.  Does anyone know why this printer loses his connection?

  Hi @Harry64,

  I see by your post that continues to change the default printer. I'd love to help you.

  Disable the SMTP setting in print, to see drivers if this will help.

  Devices and printers, click with the right button on the printer and click on printer properties, click the Ports tab, select Configure the Port, clear the SMTP check box and the printer should display online.

  If the problem persists, please take a look at this document. Monofunctional and HP Printers Multifunction - "the printer is offline" Message appears on the computer and the printer does not print: Windows 7

  If you appreciate my efforts, please click on the "Thumbs up" button below. Thank you.

• I can't access internet wirelessly from my laptop because I installed a new printer which is now connected to my router, is - it related somehow?

  I can't access internet wirelessly from my laptop because I installed a new printer which is now connected to my router, is - it related somehow?

  Hello

  1. what happens when you use a wired connection?

  2. how many devices are connected to the router?

  This can happen if you connect that a specific number of device to the router, and when it exceeds the limit. You can consult the router's manual or contact the manufacturer of the router to check if all the parameters must be changed to connect several devices.

   

  Hope this information is useful.

• How to print from the iPad on LaserJet p2015dn which is connected to my network wireless Ethernet?

  How do I print from my iPad 2 on hp LaserJet p2015dn which is connected to my network wireless capable Ethernet?

  Hello

  Thanks for the post.  I have included a link below that can help with printing from your iPad.  Please read carefully to ensure that your situation meets the requirements.   HP ePrint home and Biz.  Good luck!

  https://h30495.www3.HP.com/help#mobile_apps.Ma-printer-issue

• HP wireless printer (3545) showing only printer and scanner, connected via Wireless

  When I connect via USB, I see Print/Scan option in the settings system-> Printers & Scanners

  But when I connect through wireless, I only Print

  What is the problem?

  Even in the HP utilities, I don't see this option "Scan to Computer" when it is connected to the wireless printer

  Hi TahseenJamal,

  Thanks for the video, which has been most useful.

  I suspect that the router can be not broadcast the Hello Protocol as it did in the past. To resolve this problem, please follow the instructions below.

  1. Out of the router, unplug the power cable
  2. Out of the printer, unplug the power cable
  3. Stop the Mac
  4. Give up everything for 1 minute and then reconnect the router
  5. Once sighted routers are on, reconnect the printer to the
  6. When the wireless printer is solid, turn on the Mac
  7. Now try to add the printer that you had previously, you should now see the Hello or Hello printer multifunction beside him.

  If this does not resolve the problem, it could be the printer. Follow the steps below.

  On the front panel of the printer, the arrow down to settings, then press OK. Down arrow for wireless and press OK. In the wireless menu, go to IPV6 and turn it off. Once IPV6 is disabled, try to add the printer in the preferences system again.

  Please let me know if either of these solutions solve the problem and if one of them, please also let me know, thanks.

• If my desktop pc is connected through CATV cable, I use the wireless connection?

  We have a router that connects two laptop computers, a smart phone and smart TV, a Kindle reader and a printer.

  I want to know is so that desktop shows a "wireless network connection", I actually use this connection if this computer is connected through a CATV cable? Specifically, if I disconnect in that regard, maybe would I win any speed for this computer or laptop computers that are located in different parts of the House?

  And if so, how can I fix it so that it does not automatically each time connect that I boot?

  Thanks for your advice.

  It seems to me that you have a wireless router with many connected devices, including a desktop PC, and you want to know if forcing the PC being used a wired connection to the router, instead of a wireless connection, will increase speed or ease of use for one of your devices?

  Short answer, probably yes, and it should not hurt anything.

  Wireless network connections are all just more finicky than the wired connections. Without knowing the details of your router, I can't do any insurance policy, but reducing the pressure on your wireless radio components and its replacement by the PC with a wireless connection wired should not hurt anything and could help.

  I guess CATV here means a type of wired network cable CAT-5 cable? If it's just a "CAT 5" cable, he'll only go 100 Mbps, which might be slower than your wireless router. However, 100 Mbps is probably faster than your internet connection at home (your speed of the router to the outside world), so it should be good. If it's a "CAT-5e" cable, so no problem.

  To disable your wireless connection on the PC, go to control panel-> Device Manager command. You will get a window with a list of all the hardware devices on your computer, listed by category. A category must be "Network adapters" or something similar. Expand this category by clicking on it and find your wireless card (something something Wifi or wireless network card). Right-click, and then click on disable. Now your computer will be able to connect with the wired connection. When you want to cancel the process, simply repeat these steps and you will find that 'Disable' has been replaced with the option 'enable '.

• How can I get networked computers running XP in order to use a printer that is connected to a computer that is running 7?

  How networked computers running XP home can use a printer (hp laserjet 3030) which is connected to a computer that is running 7 pro 64-bit?

  Seems there is a driver problem but I downloaded the driver several times and no luck. Telling me the wrong driver is installed.

  Firewall is also disabled.

  Printer is shared.

  I am far from a networker, so lame mans terms = please) thanks

  Hello

  These should help:

  Share files and printers between Windows 7 and XP
  http://www.howtogeek.com/HOWTO/Windows-7/share-files-and-printers-between-Windows-7-and-XP/

  Configuration network host connection windows 7, xp and vista
  http://Techblissonline.com/home-network-setup-connecting-Windows-7-XP-and-Vista/

  Networking of computers running different versions of Windows
  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

  =========================================

  More help at these locations: (Vista references also apply to Windows 7)

  Vista - LAN
  http://www.onecomputerguy.com/Networking/vista_network.htm

  Vista network and sharing Center
  http://www.onecomputerguy.com/Networking/vista_network_sharing_center.htm

  Setting up a network home
  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-home-network

  Setting up a wireless network
  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  Home network, wireless network and computer networking Made Easy
  http://www.home-network-help.com/

  Windows Vista tip: How to install and connect to a wireless network
  http://www.watchingthenet.com/Windows-Vista-tip-how-to-Setup-and-connect-to-a-wireless-network.html

  Networking tutorial home
  http://www.tehnomagazin.com/computer/home-networking-tutorial.htm
  Practically networked - everything you could possibly want to know.
  http://www.practicallynetworked.com/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">