My psc 1215 do not print

Similar Questions

• HP psc 1210v will not print photographs

  HP psc 1210v will not print photographs

   

  My HP psc 1210v All in One Printer works correctly for many years.  In December 2010, I tried to print a picture and color was distant.  Recently, I need to print photos and had the same problem.  The printed photos on the left for good start gray and pink and pink and gray stripes vertical.  For example. print the picture but the color is ruined.   I get the same result if I print from Windows or IrfanView photo gallery.   I can print a test page for Microsoft and it prints OK including colors.   I've deleted the HP printer and reinstalled.  The same problem exists.  I ran the HP diagnostic printer and he found no problem.

  Any suggestions?

  Bob_in_PGI

  .

  Bob_in_PGI

  I solved the problem by installing a new color #57 ink cartridge.  The printer would print a color test page but the color cartridge could not print a color photo.  I have not had any warning about the color cartridge is low on ink.

  Bob_in_PGI

• HP PSC 1200 do not print under Windows 7 Ultimate

  I've upgraded to Windows 7 ultimate for XP have not updated from office. My hp psc 1200 works well when it's windows xp, but not when I update my windows. I finished installing the driver, but when I tried to print some of my documents. It can not print. What should I do?

  Hi zoleen,

  Welcome to the HP Forums! I see that you can not print with your HP PSC 1200 with Windows 7 Ultimate edition. I'm happy to help you! Please have a look through this guide to printing. Print jobs are stuck in the print queue.

  Hope this information helps you and have a great day!

• My HP psc 1110 does not print colors when I use the shortcut keyboard F12 key to print. considering that it is p

  I just bought printer HP psc 1110 and despite I loaded the print from the HP website driver and together it up correctly, it has new ink cartridges, it does not print color to color text pages when I use the the keyboard F12 shortcut key to show.  I have the microsoft intelli wireless keyboard.  Although that it prints very well in color while I use the method of dialogue of the system either by pressing "Ctrl + Shift + P" keys together.   I have another canon printer canon pixma 1500 a former model, even this canon allows to print in color using one of the methods above to print.  I'm curious to know why HP is behaving as it is with me.  Can someone knowledgeable enough to enlighten us on this issue and help me on this problem, please.  I would be grateful if someone can send me a response.

  My email is: {deleted personal information}

  Naseer Malik

  Hi Ngoyi-Malik,

  OK, when you right click and select print work properly?

  If you come to open a different document in your Word and press Crtl P it prints correctly?

  The question seems that it is related to the program that you use for your missions. You may need to continue to press the Maj LTRC P in order to get the color to print from this application program. Let me know if the Word printing works well?

• The scanner of HP PSC 1215 does not work on windows 7. What should I do?

  W7 (64 bit) is running on a Samsung 300U1A/305U1A - photocopying and printing works very well. What I'm doing wrong - there is evidence that support.

  Hello

  As OEM HP is responsible for the proper functioning of the printer/scanner and their drivers.
  Check with HP Support, their drivers and documentation online and ask in their forums.

  Good luck, you need to update or reinstall the latest driver.

  HP PSC 1215 all-in-One Printer<->
  http://h10025.www1.HP.com/ewfrf/wc/product?product=412187&LC=en&cc=us&DLC=en&lang=en&cc=us

  HP - Software & Driver Downloads - HP PSC 1215 All - in - One Printer<- set="" to="" your="" version="" of="">
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=412187&LC=en&cc=us&DLC=en&lang=en&cc=us

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• PSC 2015 does not print images

  I use a psc 2105 with windows 7 Home.

  For some time the printer does not print images of any program, Word, paint etc.

  I've been in contact with a Dutch forum and desperately, I installed a driver for a PSC 3050 and Yes, it worked.

  However, I get the message: GET /DevMgmt/DiscoveryTree.xml HTTP/1.1, which is well documented on the internet.

  So, I looked to Decice tab settings and everything I could find information on the feeder.

  Then, I went to try to download a dribver universal printer PCL6, as advised, but couldn't it works, so I'm or solutions.

  can someone please help me more?

  Concerning

  Arie

  I'm happy to have contributed in any way I can. Just to let you know that you can show your appreciation by clicking on the star by each of my posts to provide praise or step that fixes your problems, you can choose that as the solution for this thread.

  If not, have a great day and stay dry!

• PSC 1610 all-in-one printer: PSC 1610 will not print

  HP PSC 1610 all-in-one

  No including photographic paper feed and the following messages are received: paper jam or paper. This is not correct. Jam has recently replaced; all paper rolls have been cleaned up with water. Any advice would be appreciated.

  Thanks for your reply. I think you are right to say that it is a hardware sensor problem. In the circumstances, I'll buy a new printer/scanner/copier.

• PSC2175: PSC 2175 does not print on Windows 8.1

  PSC 2175 prints on Windows 8.1. Although it scanner and Windows recognizes that the printer is connected is not in Applications like Internet Explorer and Microsoft Office as an available printer even though it is listed in the hardware and printers. HP Print and Scan doctor says that the software is installed, however if you select "fix print" and says that the complete software solution is not installed. If you select "Make install", it says "Page not found". If you select "Drivers and software" and follow the instructions the software only lists is utility of Diagnostic Tools that expands to be install printer HP for Windows. When it works, it says that the printer drivers may not be loaded correctly. By following the instructions to fix the problem, it of just in a loop back to the original Panel, saying that the drivers do not seem to install correctly and try reinstalling the downlaod and install the wizard.

  Hi @manzagol

  It seems that diagnostic tools take you in circles. I'd be happy to help you, but I'm afraid that there is no feature complete and the software for the PSC 2175 for Windows 8 or 8.1.  Instead, you use a driver in OS. A printer driver is software that lets the computer run the printer.

  I wonder if you can uninstall the driver in the OS and reinstall it again. I wonder if the instructions given in the following link may help you with this; Uninstall, disable, restore and update device drivers in Windows 8 / 7

  I hope this helps.

• HP PSC 1600 will not print.

  I have a HP PSC 1600 all in one. Operating system is Mac OS x 10.6.8. (laptop)

  I get a message that says that the printer has "no mech mode" & failure of Communication: the computer is therefore more able to communicate with your printer. "Turn off the printer, check your printer connections and look for errors in the printer and turn on the printer.  Also says: "the printer offline. A break. "Can't seem to reset this mode in the printer preference box. I know the printer is old, but it has been working great until now.

  He scans the computer and sends an e-mail message. I unplugged several times & reset the default value of the button "setup" printers.

  Ink cartridges carriage does not move when I plug the printer in and printer. Generally the transport when I turn on the printer, sounds like it moves back & fourth. But not now. Did not have any 'new' things installed.

  Thanks for any help! or97355

  Take a look at this linkfor help.

• PSC 2210xi does not print

  Product: PSC 2210xi printer all in one

  OS: Mac 10.5

  Error message: an unexpected error has occurred (1001) - trying to run diagnostics in the utility menu

  Print e-mail messages only the header: FROM, to, etc. with any other vacuum.  Word documents only print a random URL.

  Automatic alignment of cartridges does not occur.  When I choose the alignment of the installation menu, only a few lines on the alignment page printing.

  Hello

  Thanks for the post.  On this one, there are a couple of different issues.  Have you changed your printers or drivers recently?  Have you installed new software?  Pleease note, the diagnostic utility is for only Windows-based systems.  I've included some links below that should help solve this, the first being the link to the driver download page for you machine, the other with a description of the systems utility and taken in charge.  Good luck!

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=219&LC=en&cc=us&DLC=en&sw_lang=&product=79499#n193

  http://support.HP.com/us-en/document/c02072599

• my HP PSC 1610 does not print

  I have a dell dimension 2400 desktop under XP.  I try to install this PSC 1610 all-in-one printer.  I down loaded the software driver.  When I try to print the printer begins to run, and looks like it's printing, but the page comes out blank.

  My previous printer is a HP Deskjet D4360.  The connector on the printer is the same; I have no new cable; So I used one of my 4360.

  Please help Frank

  You can check the ink levels by printing a self-test page.

  With loaded paper, press on set up until print report appears on the screen, then press OK. Press OK again.

  If this does not work, go to step 1.

  I would like to know how to work the other steps.

• PSC 1510 does not print

  Just updated to Windows 7 Home Premium. (32-bit)

  My printer is a HP PSC 1510xi all-in-one.

  My printer does not work with Win 7

  At HP, I downloaded and installed the proposed driver:

  AIO_CDB_NonNet_Full_Win_WW_130_141.exe

  Have so far spent 2 days working on this situation.

  Printer still does not work.

  Any help and suggestions welcomed.

  Thank you, Tom

  bevgee52 wrote:

  Just updated to Windows 7 Home Premium. (32-bit)

  My printer is a HP PSC 1510xi all-in-one.

  My printer does not work with Win 7

  At HP, I downloaded and installed the proposed driver:

  AIO_CDB_NonNet_Full_Win_WW_130_141.exe

  Have so far spent 2 days working on this situation.

  Printer still does not work.

  Any help and suggestions welcomed.

  Thank you, Tom

  What is the nature of "does not work"?  The printer appears in the folder devices and printers?  What happens if you send a test page?  The 1510 correctly will make a copy of the façade?  That you get on the screen or on the 1510 error messages?

• HP PSC 2355 does not print B &amp; W on Mac

  Use this printer in windows and it will give the option to only print in B & W. On Mac have not figured out how to do this or is it not available? »

  Hello Dwan2,

  Welcome to the HP Forums.

  I see you are trying to simply print in black ink.

  Here's a screen shot that I think will help you with this problem.

  

  Please do not hesitate to write me again if you have any questions or concerns.

  See you soon,.

• HP PSC 1400 does not print

  I have a series HP PSC 1400 all-in-one who decided to stop printing this morning - I can see the documents in the queue, but nothing is printing, all thoughts. Thank you, fastfreddy777

  What operating system? I suggest that you download and run the utility Diagnostics HP Print of http://www.hp.com/go/hp.  Troubleshooting pages here can help.

• My HP psc 1110 printer does not print the color pages by using the hotkey (F12) PRINT button

  I have window xp home system and the printer HP psc 1100 Series (HP psc 1110 precisely).  My problem is that when you use the dialog system (Ctrl + Shift + P set keys), it prints color pages; Whereas, when I use the button PRINT keyboard on the microsoft intelli-type wireless keyboard, it does not print in black ink and not in color.  Could someone please sort this out for me, how for it, so it will print color even when I use the correct keyboard shortcut key photography. Or tell me why it behaves as it behaves at the present time. I'd really appreciate it.

  Thank you very much.
  Naseer Malik

  Hello

  Try the methods provided and see if they help to resolve the issue.

  Method 1:

  Try to download the latest version of the IntelliType Pro 6.31 for Windows XP software and check if the problem persists.

  Reference:

  http://www.Microsoft.com/hardware/en-us/d/wireless-keyboard-1000

  Method 2:

  Reinstall the drivers for the HP PSC 1110 all-in-one printer and check if the problem persists.

  Reference:

  Printer HP PSC 1110 all-in-one

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=228&LC=en&cc=us&DLC=en&sw_lang=&product=90787

  Method 3:

  This problem may also occur if the keyboard shortcut key do not work correctly, try the steps of troubleshooting provided in the link.

  Fix shortcuts or Volume control keys not working not not on Microsoft keyboards

  http://support.Microsoft.com/kb/932875

  Note:

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/ )
  How to back up and restore the registry in Windows