My PSC 1300 not to tell anyone!

Similar Questions

• try to download a game get message O.S. not supported can anyone help

  try to download a game get message O.S. not supported can anyone help

  Hello

  always check the compatibility of vista programs on the link below

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  If a program is compatible vista you can try to download and save it on the desktop, then right click on the setup.exe, and then selecting run as administrator

  It is not compatible with vista, you can try running it in a previous operating system mode

  This does not work for all programs

  read the information below

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  ____________________________________________________________

  and read this information MS, too

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-the-program-compatibility-Wizard

• I am installing a seagate 500 GB internal hard drive, when I go to disk management, the drive is there, but I can not format because you know not initialized. can anyone help please

  I am installing an internal hard drive 500 GB seagate on my computer, when I go to disk management, the drive is there, but I can not format because it is unknown / not initialized. can anyone help please

  Try one of the two utilities below to partition and format the drive.

  Partition Wizard Home Edition:
  http://www.partitionwizard.com/free-partition-manager.html
  Note: There is also a CD bootable or versions of the bootable Flash drive:
  CD: http://www.partitionwizard.com/partition-wizard-bootable-cd.html
  Flash player: http://www.partitionwizard.com/bootable-flash-drive.html
  Among the features and functions: create partition, Delete partition, format partition,.
  A partition resize, move partitions, restore Partition after an accidental deletion, convert partition, Explore, Hide partition partition,
  Change the drive letter, a partition active Set, Explorer (content display) of the partition.
  Note: To achieve any task using the "Operations pending" box at the bottom or top left.

  Alternative to Partition Wizard (a bit easier to use, but Partition Wizard and EASEUS have almost identical user interfaces)
  EASEUS Partition Master Home Edition (free):
  http://www.partition-tool.com/personal.htm
  Partition software ALL-IN-ONE and the most convenient hard disk partition manager Kit
  Includes Partition Manager, Disk & Partition copy Wizard and Partition MBR and GUID partition GPT disk recovery Wizard (table) on Windows 2000, XP, Vista, Windows 7 and Windows Server 2000/2003/2008 (32-bit and 64-bit).
  It allows users to resize/move Partition, drive system extend, copy Disk & Partition, Partition merge, Split Partition, redistribute free space, convert dynamic disk, Partition Recovery and much more.

  J W Stuart: http://www.pagestart.com

• Getting error while coupling device replication site v (PSC is not available)

  get an error whenever trying to devices of replication pair that the PSC is not available

  Dear all,

  Problem is solved

  I missed to upgrade server ESXi 5.5 to 6

  Kind regards

  Arun

• I do P2V of a Linux Machine, his failure with the error "FAILED: an error occurred during conversion:"root is not found""If anyone can suggest how to solve this. "

  I do P2V of a Linux Machine, his failure with the error "FAILED: an error occurred during conversion:"root is not found""If anyone can suggest how to solve this...» He does not drive partition root to copy don't know why his account right there.

  I solved the problem myself... This is because the Version of Vcenter Converter. I'm using Vcenter Converter 5 to P2V a server Linux RHEL5.2, its not supported by Vcenter Converter 5. That of why I've done P2V using Vcenter Converter5.2 and accomplished.

• How to unlock objects in spread? My can´t objects be moved (stand picturesboxes and text boxes), and the control/opt/L command is not available. Anyone know how to do? Maria

  How to unlock objects in spread? My can´t objects be moved (stand picturesboxes and text boxes), and the control/opt/L command is not available. Anyone know how to do? Maria

  Try trashing preferences. See replace your preferences

  And please turn off or remove the autoquote bey email for the answer. Thank you.

• PSC 1315, not paper feeding

  recently reinstalled my psc 1315 and installed new ink cartridges.  It is "sounds of printing", but the paper does not feed.

  Hello
  
  This article covers book food issues and should solve your problem. Give the steps described a shot and tell us if it helps.
  
  Good luck!

• HP Envy 5530 PSC: HP ENVY 5530 PSC will not scan and save on my desktop directly from the PSC. Help!

  Help, please! My printer/scanner/copier device will scan is no longer documents if you ask the PSC analysis directly. It will scan and I would like to save the scan on my computer if I open the icon Wizard HP printer on my desktop computer and it asks from there. Nothing has changed on this computer or PSC recently and the PSC makes still copies very well.

  When I request the analysis of the PSC, here is the error message that appears: "connection error. The computer does not respond. Check if the USB cable is attached or wireless is working properly, and then try again. »

  Some info:

  The PSC shows that it is connected to the computer and I checked the connections and everything is physically connected. I also update the PSC. The PSC is certainly connected to the internet (and without wire - the light blue, no flashing lights). I have Webroot Anywhere Secure protection for my desktop computer.

  I checked the forums here and I do not see a response. Some of the help documents are dead end links so that does not help.

  I'm not sure if this is a permanent solution, but finally, I finally solved this problem.  I decided to first unplug and then plug in my router. Then I unregistered and registered with Windows 10, your previous recommendation. Then I started from scratch - unplugged everything related to the CFP and also deleted the previous PSC software installed on the computer. Then I plugged in the printer and re-downloaded software. Tested to request a scan of the PSC and it worked - double checked by stop and to remit all running and I tried to request a scan of the PSC again and it worked again. So, it seemed to be a combination of renewal with Windows 10 and setting up of the PSC from scratch, to solve this, at least for me. Thanks for your patience! I don't think something regarding my download Windows 10 had something to do with mess up the signal from the PSC to the computer and I had to put fresh once again.

• I have a yellow exclamation mark on my wireless and signal when I diagnose the problem that Windows says 'the DNS server does not. Can anyone help?

  I have our computer server set to a static ip address, because our printers work on the network. Every time I try to connect to the internet Windows tells me "the DNS server is not responding. Can someone help me?

  It is a forum for specific consumers. You will find the Windows Server support in these forums: http://social.technet.microsoft.com/Forums/en/category/windowsserver

• PSC 1210 not printing anything

  According to the title - no problem, put on the market, no led error, tried to print, sheet produced but empty.

  I replaced both cartridges - still nothing, no alignment sheet (not even a void) does not produce but now "Check print cartridge" flashes.

  When checking the properties of the printer, I learned "the device is functioning properly.

  All I can think is perhaps the need for cleaning nozzles, but I can't find the tab "maintenance".

  Properties of the printer to try it. Please let me know where this can be found most any other suggestions

  as to what might be wrong.

  What about John

  Hey @Johnandberny ,

  Thank you for taking the time to post on the HP Forums today! Hope you enjoy the experience.

  I understand that you are getting the "Check print cartridge" light on your HP PSC 1210.

  Here is a document that addresses all the light on these series of printers. Please take some time, click on the links of correlation in the body and follow the steps in the solution.

  Flashing lights on the printer series all-in-one HP PSC 1200, 1310, 1340 and 1350

  Have a great day! Hear from you soon.

• Hi, I just realized my disk drive does not work, can anyone help

  Hi, I just realized my disk drive does not work, I never use watch cd or dvd, now I am installing a norton internet security 2012 after that I put in the cd, there is no response, anyone, please

  Hello

  First, try the automated Microsoft fixit at the link below.

  Windows 7

  Vista

  Check if the drive works now.

  If the drive still does not work, open all programs, open accessories, right-click on command prompt and select "run as Administrator".  In at the prompt, type the following command and press ENTER.

  sfc/scannow                (Note that there is a space between sfc and /)

  Let the entire process, then the output type and press ENTER.

  Then, click on the Start Menu, open Control Panel and click Device Manager.  Click to open the CD/DVD-ROM drives.  Right-click on the drive and choose uninstall.  Do not delete if requested drivers.  When the device has been uninstalled click the icon 'Search for hardware changes' (usually just below help in the toolbar).  Let windows reinstall the disc and see if it works now.

  Kind regards

  DP - K

• HP PSC 1210v: HP PSC 1210v not recognized as a printer after upgrade Windows 10

  I have a HP 15 TS laptop that was purchased with Windows 8.  My printer is a HP PSC 1210v all-in-one and it worked fine with windows 8.  After upgrade my PC to windows 10, this printer will no longer be recognized by the PC as a printer.

  This printer is connected via a USB cable.  When I discovered the devices, it appears as "HP 1200 series" in connected devices.  When I discovered the "devices and printers" it appears in the category "unspecified" as "HP 1200 series", but not in the category 'printers '.

  Hi @dfeen8200,

  Welcome to the Forums of HP Support! I see that you have recently upgraded to Windows 10 operating system and now your HP PSC 1210v is no longer recognized, and is not listed in the devices and printers.

  I would like you to take a look here: installation and using the built-in Windows print driver

  & Have a look here:

  Guide to upgrade Windows 10 for HP printers

  I hope all is well!

• the printer HP psc 1300 series & new Lenovo Ultrabook

  I recently bought this ultrabook and I would like to add my printer. There is no CD drive so I do not know how to connect.

  grandma_j

  Hi, here is the link to a HP Installer for the 1300.

  Just download the hppie.exe program and run it.

  If you have a computer of Windows 8, then this link can help.

• HP laserjet 1300 not receive signals from computer

  HP Laserjet 1300 does not receive signals from my computer. Please explain

  Can you network or USB cable into the printer to the computer?

  What operating system do you use?

  If you are on windows 7 and network, you must check and make sure that the IP address of the printer is listed as the same thing in the port settings.

  If you are using windows 7 and you use a USB cable, you will need to load the printer via the IN-OS driver. See the link below...

  Install the driver included in the operating system Windows 7 (OS)

  If you use another OS or driver, please let me know.

• BlackBerry Smartphones paid for Beepus app, will not install, can anyone help please?

  Hello

  I have a BB Curve 8520 and remember to have Beepus when it first came out and it was free. After awhile, I deleted the application. A year or two later, I want go back once again and now it costs money. OK this is great no problem, so I paid money for the app and it took me my file uninstalled my app World and began to re - install. However it keeps failing and I have no idea why and what to do about this.

  This is the second time I paid for an application now and he has not installed, I have the first release but do not see why I should pay for an app that installs not on my blackberry. He has been before, so I don't know what the problem is. Has anyone else had problems with this?

  Have suggestions or someone knows how to fix this?

  Any help would be greatly appreciated.

  Thank you very much

  Lee

  sdgardne,

  I followed your instructions and your option 3A.

  I must say that it worked perfectly! I also have to say, I had my reservations when I was actually in this direction (forums) by Blackberry when all I wanted was to contact them directly.

  But my experience here was be quick, effective, reliable and correct!

  Thank you very, very much.

  Much appreciated, regards,

  Lee.