My screen will not lighten or darken

Similar Questions

• 7 slate screen will not turn

  The screen will not rotate from portrait to landscape when I turn it on.  Any suggestions?

  As in the other thread, slide down from the top. Click the icon which is a "lock" with arrows around it.
  
  Also can you please let us know when you need this rotation? It seems that it is locked during the first installation, but it is unlocked once that is finished.

• Status bar at the bottom of the screen will not allow

  Status bar at the bottom of the screen will not even when I try to activate with display > verified status bar

  This has happened

  Each time Firefox opened

  Hello Darryl.

  It is possible that you have a problem with some Add on Firefox which is an obstacle to the normal behavior of your Firefox. Have you tried to disable all add-ons (just to see) to see if Firefox goes back to normal?

  Whenever you have a problem with Firefox, whatever it is, you must make sure that it is not caused by one (or more) of your installed modules, whether an extension, a theme or a plugin. To do this easily and cleanly, start Firefox in safe mode (remember to select disable all add-ons when you start safe mode). If the problem goes away, you know that it's an add-on. Disable them all in normal mode and allow them one by one until you find the source of the problem. See this article for more information on troubleshooting extensions and theme and this one for plugins.

  If you need help with one of your modules, you will need to contact the author.

• Can't connect, connection startup screen will not respond to mouse clicks or keyboard

  I do not have a DVD to boot from. I use a laptop (Acer Aspire 5610). The keyboard and mouse are internal.  Any suggestions at all? I tried the Safe Mode, Mode safe mode with guests hoping to type rstrul.exe, but never had the guest. He went directly to the display of connection with my daughter and my icons. I have added no new material.

  Separated from the:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/cant-login-login-splash-screen-will-not-respond-to/54da4727-b98c-436a-8D82-f31c3355f5fd

  Have you shot inadvertently carpet of mouse/keyboard. This can happen through the Fn key on some laptop models. Find the picture on the key Fn, should give a clue.

  You can borrow or buy a usb KB and mouse that you would at least pass by troubleshooting?

  Tricky

• Windows 7 splash screen will not change after the vista update

  After updating vista 32 bit to windows 7 32 bits, the splash screen will not change and he showed the vista boot. I read a lot of forum and the web page, but this solution:

  «.. . the dummies and bad start screen for Windows 7 is due to the locale entry in the startup folder, which could not be set when editing or rebuilding the BCD. When the locale is not found, Windows boot loader doesn't know what local startup folder to look for the animated bootscreen. Thus, in order to fix the boot screen so that the splash screen can be re-established, restored or reset to original animated Windows 7 boot screen, just run one of the following commands at the prompt with administrator rights:

  bcdedit/set {current} settings regional en-US

  or

  BCDboot % WinDir % / l en

  Change the US to the language version of Windows 7 installed, as ja - JP, en - us, es - ARE, pt - BR, zh - CN, zh - TW, fr - FR, fi - FI and etc.

  Restart the computer after running the command to see the new boot UI (user interface) be used again. To check if the locale has been entered properly, just run the bceedit command in the command prompt that is running as an administrator... »

  not solved my problem and also know for many users... after updating vista in windows 7 splash screen stay the same...

  Thanks for your help
  Hispanico hispanico

  Hi hispanico,

  Thank you for visiting Microsoft Answers.

  I suggest you do a repair from WinRE (Windows Recovery Environment) system using a Windows 7 installation disc. Follow these steps:

  1. turn on your computer, insert the Windows installation DVD, and then restart your computer.

  2. Press any key when prompted to do so and follow the instructions that appear.

  3. when the Windows Installer page, click repair your computer to access system recovery options.

  4. follow the instructions.

  Please visit these links for more information on the Startup Repair:

  1. http://windows.microsoft.com/en-us/windows7/Startup-Repair-frequently-asked-questions

  2. http://windows.microsoft.com/en-US/windows7/What-are-the-system-recovery-options-in-Windows-7

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• What to do when the required help screens will not accept any existing ID or passwords? 13 download to PC elements missing section archive. Normal help screen will not accept any adobe exisitg D. Whatdo, I do now?

  What to do when the required help screens will not accept exixting ID or password?

  Downloaded items 13 PC. Implementation noted this archive missing article.

  If something is demanding a password is not likely to be a request for Adobe since Adobe does not normally require any.  It could be your computer's security requiring you to allow an installation to occur.

• Lightroom 6 does not. Splash screen will not go away. Task Mgr "not responding".

  Downloaded and installed (twice), you click ok to update the catalog LR 5 (will not find a LR 6 cat, however), but the splash screen will not go away and program will not work.  Circle of blue rotation on forever, task manager says does not.

  Signed by adobe and in return, no help.

  I downloaded and install creative cloud and Lightroom 6 works now, it seems to pick up on initial start-up... How are we suppose to know?

• How can I change the workspace to a color for my computer screen will not show

  How can I change the workspace to a color for my computer screen will not show	Submit question

  	Submit question

  Photoshop CS6 now opens by default with the "Application Framework" lighted. You can go window > frame application in the main menu and uncheck this

  We have a lot of useful information in the FAQ section. The answer to this question was also there. See the link:

  FAQ: UI - how do I change the color theme, text size, or cut the course of enforcement?

  Feel free to browse other FAQS, there might be a few other things of interest.

  Guinot

• iOS 10, screen will not auto dim.

  Hello

  Since I updated to 10, my lock screen and home on my iPhone TO will not be automatically dim or turn off.

  I've updated my lock screen auto to a 30 second time out, but if I press the home button or receive a notification; the screen stays on indefinitely.

  Hi there, CyrenaH!

  Thank you for joining the communities Support from Apple! Looks like you have a problem with the iPhone not dimming properly. I know how it is important to be sure that the iPhone does not stay on at all times! The good news is that there are a few steps, you can try to get this support! First of all, read this article with the steps to restart your iPad, iPhone or iPod touch.

  The next thing you might want to try going in settings of the iPhone and then Reset. Once there, tap reset all settings. This will reset the settings of the iPhone, but does not erase personal information such as pictures, music or contacts. However, it will remove a connection Wi - Fi and VPN settings, so do not forget, you have these settings and passwords ready for iPhone upward starting.

  If this does not work, it would be a good idea to make sure that there is not a problem of software as the cause of this for you.

  1. Read this article to know the steps for backing up your iPhone, iPad, and iPod touch.
  2. Use this article for steps to use iTunes on your Mac or PC to restore the iPhone, iPad or iPod to factory settings.
  3. Once this done, set the phone like new and the phone to see if the issue is still being tested. Follow this link to restore your iPhone, iPad or iPod touch from a backup

  Have a great day!

• Satellite A200-PSAF6A - white screen, will not start

  I've had for about a year or more now, out of warranty, and I had no problems so far. The operation of the machine is perfect, done a little warm here and there, but I never had blockages of material etc. The problem lies in the boot process where it lights up but the screen remains black and the HARD drive activity light flashes once, the optical reader clicks like it normally does at the start, and all the normal power supply/battery lights are as they should be, but the laptop will not progress beyond that. The power led remains blue and there is not much activity from the hard drive or any part of the material. This not even the screen of the BIOS at all. At some point, which I suppose because I can't see a pattern emerging in any form, the laptop will emit several beeps and the HDD led starts to blink signifying a boot up is ongoing, but the screen remains blank. At this point, if I turn off the laptop holding the power button / I am sometimes able to start with the display work, but once these things are depend on chance then sometimes it works and sometimes it isn't. Is that a real problem for me because I use this laptop for school and I get sometimes it will feed any or he will, and I'll have to wait a certain amount of time, which could be easily half the class and when he does the beep hard distracted others which is quite annoying.

  Now, I went through a lot of similar topics and tried what was said, but to no avail of course. I tried to delete all the components (RAM, HDD, optical drive, Wifi etc.) and reinstalling them that sometimes only a temporary solution. In the RAM slot I have 800 mhz and 1x1GB 667 mhz-1x2GB, I tried various arrangements with the installed RAM and RAM I have around my house, but I have not yet come to a solution. I find that I can't start up with RAM in just the second slot, I guess it's probably normal, but if it's not please comment and tell me otherwise because I read about another solution to a similar problem a person should use the ram in the second slot to get his laptop to start.

  My suspicion is that it's to do with a kind of BIOS check or maybe a BIOS corrupted, that I could not resolve without a technician because I am already in the current version of the BIOS. I did not update the BIOS that is not. If not then I'll assume that it is just a fault of power on the motherboard circuit. It's a really weird problem because it works quite well after, and I don't think it's a hardware problem perfectly serious because he wouldn't if it was.

  Any help is appreciated on the topic, share your knowledge, if you have had a similar problem because whatever it is would be useful

  Thank you

  James

  I'm not 100% sure but I think that the graphics card can be removed. Maybe you have enough experience with replacement of equipment, but laptop disassembly without maintenance manuals can be risky.
  I really hope you know what you're doing. Maybe you should contact the nearest authorized and ask for help.

  BTW: Where you want to get the new graphics card Satellite A200?

• Satellite P305-S8820 won't start no-POST 'BLACK SCREEN' will not start up CD

  When the HARD drive is connected Vista does not start, regardless of the boot order. Instead, it shows just a black screen with no cursor. Supplied recovery disks will not start. I removed the HARD drive and ran a scan of the disc to see if the drive went wrong, no dice, the disc is good and works fine via usb-sata on another computer.

  I inserted just the toshiba recovery disk, without HARD drive, and it starts. I connected the external HARD drive now and vista tries to start BSOD, I tried safe mode, last known, everything, nothing works, all get a BSOD disappearing too fast for me to read.

  I searched a dump file on my other computer and was a failure. When the HARD drive is connected via usb vista tries to start and the toshiba cd works now, however, it will not perform a complete installation of factory toshiba it does not find the HARD drive? I'm a windows user and I have years of experience with x 86 programming and windows 32-bit operating systems, but I'm stumped. Bad RAM? Bad Sata? Bad HARD drive? Bad CD/DVD? It is Vista Home premium.

  I don't want to reformat and lose all my data "I AM A REAL 'IT' not a silly computer user" no offense to all the others out there but I refuse just "format and forget ' tools used invites to rebuild the BCD and this does not work either and automatic repair does nothing, recovery does not work as it says there is no recovery points I am frustrated beyond words.

  Finally, this operating system is just horrible, I was once the 'happy' owner of a copy of Windows ME and it does not give me half of the problems that makes this operating system.

  I'm fed up with this, and am half tempted to ask my money for my computer, it might not be the responsibility of the user barely shoot / resolve these problems, they should be addressed before the product was released.

  I am at a loss. Help, please.

  Thank you

  Kevin

  I'm a bit confused with the info given, but if you can not restore/repair Windows, while you should do is back up your data to another PC using a USB adapter, and then run the recovery on the HARD drive internal in the P305.

  You must also update the BIOS.

• voice by tapping screen will not go away

  What happened twice today. I use the phone and the voice typing display will not disappear. I can use the phone.... i can go to the home screen, open apps, review the settings, etc, but I can't close the voice prompt, and I can't use it.

  It essentially makes the phone useless until I restart.

  I don't know why it does this. Not rooted and unlocked or anything... just stock.

  I've included a link to a short video that illustrates the problem.

  https://DL.dropboxusercontent.com/u/11731783/20150929_123443.MP4

  Any help would be appreciated.

  
  

• Start PC laptop Toshiba in safe mode, only displays black screen, will not respond to any commands.

  Hello, I recently tried to do an advanced start safemode, because when I tried to do safe mode by pressing F8 it would have not responded to the command. Then I did a MSconfig, lit manually in safe mode, so I can then restart and do a scan to search for viruses or hackers of air because he had a reason to suspect. Now, after the manual switch, when I rebooted all I get is a black screen. No logo, nothing. When I press the buttons for the controls at first upward, it beeps at me and that's it.

  Done, I have XP, not Vista, don't know if it makes much difference or not, but that's exactly what I did.

  Is went to start, click Run, type msconfig, went to the utility system configuration, general tab selected, then the system of services. Then selected drivers devices of loading at startup Safemode-minimal database, and then click OK. Then, the computer said I had to be logged as administrator for these changes to take place and to connect and make changes. I was already logged as admin. so I advanced and restarted the computer and that's when I got black screen, no splash screen, no logo, no cursor.

  I just read that I could have possibly messed up by not checking the VGA mode in order to be able to communicate in this mode, I don't know if it is correct or not.

  I have my recovery discs, I've tried this morning, following their directions and it will not respond to one of these orders either.

  I don't understand, why... it was working fine before I did it, but like I said I suspected a virus or a hijacker, but my Norton 360 and SuperSpyware nothing not detected in normal mode. That's why I tried to safe mode.

  Here is the vista forums

  Try the forums xp on the link below

  http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=4

  Answers by topic

  • Office & Customization
  • Files, folders, & search
  • Game
  • Hardware drivers &
  • Install, upgrade, and activate
  • Internet Explorer
  • Music & Sound
  • Networking, mail, electronic, & updated online
  • Maintenance & performance
  • Photos & Video
  • Programs
  • Security, privacy, and user accounts
  • System repair & recovery
  • TV and movies on Windows
  • Windows Update

  Walter, the time zone traveller

• Brand of Smartphones blackBerry New 8530 - many pre-installed applications on the Menu screen will not work

  I just bought a BlackBerry Curve 8530 from Verizon.  This is my first BlackBerry and I'm pretty happy with it up here - but by exploring all the features, I encountered a problem.

  So far, under the screen of Menu key, I tried to use V CAST song ID, AllAccess, and Bing.  Every time, when I chose the icon, I was taken to a new page, and you are prompted to accept the terms of the service and download the software.  Then, I waited several minutes for the software to download.  When it was over, he told me it was done downloading and gave me two options: 'OK' or 'run '.

  With V CAST song ID and AllAccess, I chose "Run" and threw on the terms of service / download screen.  I hit the Menu key and tried to select the applications in this way - but nothing happened.  I mean NOTHING.  The screen remained the same, nothing open, NOTHING.  With Bing, I chose 'OK,' to see if it has changed things-, but once again, I've been dumped on the terms of service / download screen, and when I press the Menu button and tried to select the application from there, nothing happened.

  I was able to successfully download and run Blackberry App World and successfully download and run another application here-, but it seems that whenever I try to download and run an application that already appears on the Menu screen, it will not work.

  Everyone knows about this problem before?  Any ideas as much as solutions?  As I said, I'm totally new to BlackBerry, so I would really appreciate it.

  Yes, this is what happened with the app I downloaded successfully via App World.  However, applications that do not work are not there.  (And I don't think they would even if they worked correctly BlackBerry App World, which I was able to download correctly, not included in this issue: he stayed on the home screen Menu and worked when I selected it.)  Thank you, though.

• Captivate 5 - screens will not advance preview and publish

  Hello

  I just started using Captivate 5 and I'm working on courses that are on a mobile software application, so I'm capture screenshots in a small size and you want to resize the project to a larger size, if I can put other content on the slide. After the record screen captures, I went in to change... Resize the project. I leave the Aspect Ratio to maintain controlled and choose the size of 790 x 545 preset. I click on the project to keep the same size and position in the project and leave the draft Position at the Center and click Finish. When I go to see a preview of the course, most screens will be in the correct position, but some of the screens are in the upper left of the screen, while the mouse movements remain in the correct position on the blade and the previous slide shows also in the center of the screen. Very frustrating! Can someone give me some ideas? I need to create 11 of these courses, and it is a major obstacle.

  If this feature does not someone has other workaround solutions?

  Thank you

  Tracy

  Hello

  Have you installed the fix published recently? One of the issues it resolved concerns scaling. He will be pushed any time, but you can already install it.  You will find information in this announcement of the Captivate blog:

  On the next patch...

  Lilybiri