Oracle 12 c Standard Edition on Windows 2008 R2 64 bit 12.1.0.1.0

Similar Questions

• Oracle 9.2.0.8 on windows 2008 R2 64-bit client installation

  Dear expert database;
  
  for specific needs, we need to install a client 9.2.0.8 to have connectivity with various databases.
  
  As I am a beginner in Oracle, can you tell me if it's good?
  
  1st part of client install Oracle 9.2.0.1 full (in architecture 32 or 64 bits?)
  
  2. install the patches 9.2.0.8 Group (in the same architecture as the first installation)
  
  3. install Patch 30 with O-Patch
  
  I have a lot of problems to find good sources for the OS/Architecture (windows 2008 R2 64-bit) version, I'm not sure that the old version of Oracle can be installed on this configuration.
  
  Can someone help me and tell me that it is possible to do?
  
  Thank you very much.
  
  Kind regards
  
  Thibaud.

  Salvation;

  I suggest to you please read on

  Client / Server / Support of interoperability between different Oracle Versions [ID 207303.1]
  Note to master for the Installation of the Oracle database [ID 1157463.1] Client

  Respect of
  HELIOS

• my software oracle 32 or 64-bit on Windows 2008 server (64-bit)

  I have a Windows 2008 Server(64-bit OS) in which oracle software are already installed (32-bit and 64-bit). But I do not know how to find the 32-bit oracle House and who is the oracle 64-bit home. I don't know when it was installed. I just want to know how could I check the address bit for oracle.
  
  Thanks in advance for the help.
  
  Kind regards
  Imran khan

  There are several ways (including those who work for only client installations) of MOS/metalink:

  How to check the size of Word (32 bit vs 64 bit) of the Oracle binary on systems MS Windows [465060.1 ID]

  Never tested, but this tool (filever.exe) should show the wordsize of an executable file or a dll:

  http://support.Microsoft.com/kb/913111

  Edited by: oradba the 23.11.2011 15:12

• How to migrate data from Oracle 11.2 Standard Edition to Oracle 11 g XE Beta

  Hello
  
  Can someone help me by giving steps to migrate from Oracle 11.2 Standard Edition data to Oracle 11 g XE Beta. The database size is 6 GB.
  
  Thank you
  Ashraf

  Hello Ashraf.

  use datapump (expdp/impdp).

  -Udo

• Manual startup Oracle 11.1 standard edition

  I've set up a watch DB for Oracle 11.1 standard edition.
  Everything is done manually using scripts and batchfiles.
  Logiles are copied from the primary server to the standby server, but when I try to save the ones I get an error ORA-00439: featue not activated: managed standby
  Do I need publishing company for this? I thoguht it was possible to put in place a watch physical if you make yourself the logshipping without using Data Guard.

  You can use the Recovery Manager because it is a feature of Enterprise Edition. Instead, you need to restore manually archive the file of newspaper (which you sent above).
  The command is:
  SQL > restore database pending
  
  Cancel

• Windows 2008 r2 64-bit hangs... on virtualbox...

  Hi all

  I installed Windows 2008 R2 64-bit Enterprise edition, build 7600
  on virtualbox 4.0.0.

  the client blocks at different times of the day, and I can't
  (actually don't know where to look for problems) find the place where
  the problem is.

  While watching the "Event Viewer", it seems than before
  the system hangs, there is a registered general kernel event,
  indicating that time system has been adjusted.

  the last shot, took place a few minutes after the
  is adjusted.

  the previous move was produced just after the system time
  has been adjusted (in the same minute).

  I thought that this may be due to virtualbox zone mechanism,
  but I have another windows guest (2003 64 bit) on the
  VirtualBox, which does not exhibit this problem.

  (in fact, 2003 does not report any time adjustment at all)...

  our facilities in different locations (same version of windows
  2008 R2 64 bit) do not have this problem, but they are
  do not turn on virtualbox; they go directly on the HW.

  Anyone who has lived hangs on windows 2008,
  If it's due to time adjustments (i
  understand that it may not even be adjustments,
  events seem to happen quite closely together)...

  all tips and the help much appreciated,
  Thanks in advance,
  Sam

  Hi Sam,
   

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums, since it is related to the question on the Server 2008 machine. Appropriate in instances of Windows Server.

  Please ask your question in the Forums of Windows Server for assistance.

• 10g BI publisher Setup get error in windows 2008 R2 64-bit

  HI friends,

  I try to install the 10.1.3.4.1. and 10.1.3.4.2 in the windows 2008 R2 64-bit server.

  Run the setup.exe from the folder its audit and getting spent in the pre requires.

  And is not to open the graphical utility from Installer instead of as its showing an error like

  "setup.exe has stopped working".

  Windows can check online solution of the problem

  close the program.

  I downloaded the software from the following location in the RTO,

  http://www.Oracle.com/technetwork/middleware/bi-Publisher/downloads/index.html

  http://www.Oracle.com/technetwork/middleware/bi-Publisher/downloads/index.html BI Publisher 10.1.3.4.2 for Windows (32/64 bit) (1 GB)

  http://www.Oracle.com/technetwork/middleware/bi-Publisher/downloads/index.html BI Publisher 10.1.3.4.1 for Windows x 86 (765 MB)

  
  

  Please suggest us to go further...

  Waiting for the answer.

  
  

  Concerning

  Kumar
  

  Hello

  Thanks for the replies.

  The problem has been resolved.

  due to unzip the software in the longest trail, we got this error.

  Solution:

  We tried to unzip the software using 7zip.

  and unpacked the software to drive direct c (shortest path as C:\BPM\)

  Then I tried to run the setup.exe file, it worked very well...

  Once again thank you for their support.

• Windows 2008 R2 64 bit servers with UAG memory leak

  We organize two Windows 2008 R2 64 bit with UAG servers.  We note that, during 10-14 days memory begins to run upstairs and users no longer able to connect to OWA through UAG.  We found KB971265 which talks about the memory leak known issues and provides a fix for Vista.  However, we do not find a similar fix for Windows 2008 R2 64 bit.  Does anyone have a suggestion?

  Hello JimBrighter,

  Thanks for visiting the site of the community responses to Microsoft Windows. The question you posted corresponds to the Windows 2008 R2 servers and would be better suited to the TechNet ITPRO community.

  Please visit the link below to find a community that will provide the support you want.
  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

   

  They will be able to solve your problem.

  Sincerely,

  Marilyn

• How to extend the C:\ On Windows 2008 R2 (64 bit) OS disc without interruption of service!

  Hello

  He was for some time because I used the VMTN forum, I am in need to find the best solution to extend the drive of Windows 2008 R2 (64-bit) C:\OS and requires no interruption of service.  I use a lot of options before but seems to be some limitations for requires downtime or 32 bit instead of 64-bit anyone no matter what evidence would be greatly appreciated.

  Options:

  1. use the 2nd virtual machine as aid

  2. use the vmkfstools command line

  3. use the Dell ExtPart tool it of live and uninterrupted, but does not support x 64 bit works very well with 32-bit

  4. use 3rd tools like Partition Magic or other tools (anything I can try using the free trial version would be cool)?

  Ideas or something would be great?

  Azn2kew

  Hello

  I am convinced that W2K8 server and suport extend the volume without tools 3rd part and without service interruption.

  See for example here: How to extend a Partition on drive in Windows Vista and Server 2008

• Cannot install Windows 2008 Std 64 Bit on VM Machine

  Hello team,

  I'm unable to install Windows 2008 Std 64 Bit on VM Machine.

  Get an error like:

  Windows could not start. A recent amendment of the harddware or the software may be the couse. To solve the problem:

  1 insert the youe Windows installation disc and restart your computer.

  2. choose your language settings, and then click "next".

  3. click on "Repair your computer."

  If you don't have this disk, contact your system administrator or computer manufacturer for assistance.

  file:\windows\system32\boot\winload.exe

  Status: 0xc000035a

  I have traced the CD on the server, but giving this error.

  Kindly help me.

  Thanks in advance.

  Aloha-

  VT turned on in the BIOS of the host?

  Bill

• Slow access to the virtual machine network (Windows 2008 Server 64-bit) Windows 7.

  Hello.

  I have a problem when you access files shared on a Windows 2008 Server 64 bits on a client computer to Windows 7. It takes a long time (up to a few minutes) to for example open a Word file from the network share. It is not always, but quite often.

  This also happens on two different servers client with almost the same equipment. Which is a basic IBM x 3400 with hard drives in RAID. I disabled the feature of unloading TCP/IP on the network inside the VM card.

  Someone has an answer for this? Have I missed something, a configuration perhaps? I'm totally lost here...

  Kind regards

  -Jean-

  Try this fix:

  http://support.Microsoft.com/default.aspx?scid=KB; EN-US; 982860

  Enrico Giacomin

• Reference Dell SC1425 + Windows 2008 R2 64-bit

  The server is 64 bit, but when I try to install Windows 2008 R2 64-bit as a customer, the installation tells me that 64-bit is not supported.

  What should I do to make this work?

  http://windowsitpro.com/article/articleid/102302/q-do-VMware-vSphere-and-ESX-4-require-a-64-bit-processor.html

  A. Yes. The latest versions of ESX 4 and vSphere require a 64-bit processor. You also need a processor that supports hardware virtualization (AMD - V or Intel VT) support if you want to run virtual machines (VM) 64-bit. You can run 32-bit virtual machines without hardware-assisted virtualization, but you still need a 64-bit processor.

  I don't think that this processor is intel-vt or AMD - V support.

• Application pools and CF9 64-bit and Windows 2008 R2 64-bit

  Hi all.

  Since about 3 months ago, I got CF9 64-bit running successfully on a Windows 2008 R2 64-bit, and 64-bit PHP server.

  It was a few days get it all working happily together, but it's an entirely different discussion, I'm happy to help if someone at - it need help.

  My question is for someone with some experience and understanding of the relationship between IIS 7, Cold Fusion and Application Pools.

  We have 8 GB of RAM on a 3.2 GHz dual processor box.  And on this particular server, we have about 350 sites of cold fusion.  All sites of very low traffic, I should add.  Like maybe on average 1000 page clicks each day.  In any case these sites ran flawlessly on 2 GB of RAM box with two 1 GHz processors.  And honestly, it ran more surely than it does now.

  What role the Application Pools in an environment dedicated to Cold Fusion?

  Because only one instance of JRun is already launched, SEE crashes when requests overwhelms the box and it blocks.  So, kind of defeated the purpose of the independent application in my opinion Pools.

  During my installation and transfer of these sites, I gave them each their own independent Application Pool, which are now individual instances of IIS worker process, each using about 10 MB of RAM.  Thus, for example, if the interaction that happens with 200 websites that they eat up to 2 GB of RAM, which, although not large, is very well now.  The problem is that I intend to leave this machine reach 500 sites before adding another box, but I worry about the performance.

  FUNDAMENTAL QUESTIONS:

  Should cold fusion Pools of independent applications for each web site or all websites can be used under DefaultAppPool?

  And what are the advantages and disadvantages of the two options?

  Is there a setting I should change who will say active stop w3wp.exe instances if no activity takes place for a certain period of time to release the memory.

  Thanks for any input.

  Rush, the bottom line questions:

  Should cold fusion Pools of independent for each web site applications or can

  all of these Web sites running under DefaultAppPool?

  No, it's not 'need '. They can all run in a pool. It is probably best to split them somehow, so that is something is not bad in a single application pool, at least those of the other application pool still works.

  And what are the advantages and disadvantages of the two options?

  As you note, each application pool uses a little memory. Not much, but as you note, 200 + it adds up. FWIW, the application pool is also part of the connection between IIS and CF, and there are times where just a recycling application pool (rather than restart CF) can solve a problem.

  That said, there certainly are times where CF will be what does not, and it won't matter to the application pools how you have. That's really what you want to focus on: why (if ever) SEE becomes is not responding.

  Is there a setting I should change who will say active

  instances of w3wp.exe to stop if no activity takes place for a certain

  time to release the memory.

  It is the default behavior of the application pools. See the "Advanced settings" for each pool in IIS 7 (or for her properties in IIS 6) for the recycling of various parameters of health protection.

  To return to your root cause problem (CF becomes unresponsive), anyway, you say "these sites were without fault on 2 GB of RAM box with two 1 GHz processors.  And honestly he ran more surely than it does now. "So what was 'before '? Not just less memory, I guess. He was also 32-bit instead? Was that an earlier version of the CF? It is useful for you to be more specific.

  Again, everything that is wrong is an explanation. It looks like you use the CF Server (not multiserver) mode, until you find in the coldfusion9\runtime\logs (not the coldfusion9\logs)? There may be important information before your plant that explains what is happening.

  As for your struggles get CF running on IIS 7, I'm curious: was it the 9.0? If Yes, what 9.0.1 (the free updater, which must be installed today on a download of CF9) which supported for IIS 7. Previously, it was indeed a little manual to make work work. And in fact, it may be that an update to version 9.0.1 could help resolve some problems if your manual configuration efforts could have hurt at all.

  Hope some of it is useful.

  /Charlie arehart

  [email protected]

  Quick delivery, help desk services remotely, the demand for CF (and CFBuilder)

  More on http://www.carehart.org/consulting

• Dump in Oracle 10 g Standard Edition of Oracle 9i 2nd version

  Dear all,
  
  
  
  Older Version: Oracle 9i 2nd Version
  
  New Version: Oracle 10g Standard Edition (first Version)
  
  Operating system: Wiindows 2000
  
  
  
  I have exported to complete the 2nd Version of Oracle 9i database and tries to import Oracle 10 g version.
  
  
  
  Actaully, I created two instances in the Oracle 10g Database as follows.
  
  
  
  1 Sissi
  
  2 Satishtest
  
  
  
  Whenver I saw in the table v$ instance, I learned to know that two instances are primary_instances.
  
  
  
  
  
  Whenever I try to import into Oracle 10 g, I use the statement below.
  
  
  
  IMP userid = sys/manager as sysdba file = 'c:\data.dmp' = 'c:\data.log' full log = y;
  
  
  
  This import statement was imported in satishtest instance only.
  
  
  
  I want to import the dump file into instance Sissi...
  
  
  
  
  
  1. how to import in particular instance?
  
  
  
  I saw that there was no key word string connection for more DETAILS HELP IMPORT. (For example IMP HELP = Y).
  
  Please give details.
  
  
  
  
  
  
  
  2. I created an instance as ORCL. But, I want to rename this forum in an ORCLOLD instance.
  
  Is this possible? How? Please provide the steps? What do we do, we considered before renaming this instance?
  
  
  
  3. I asked website with Oracle Version 9i. This application has VB 6.0, ASP 3.0 and Crystal report 9.0 and Windows 2000.
  
  
  
  Whenever we migrated to Oracle 9i to Oracle 10 g, what don't we considered (for example DLL Hell problems) lwhile migration of the entire application?
  
  
  Please help on this...
  
  I expect your valuable suggetions of your experience...
  
  
  
  Thank you and best regards,
  Orre Sissi
  
  Published by: user6351721 on October 24, 2008 03:32

  Could you please tell me how do we set the environment variables and where it is on windows?

  http://it.Nees.org/documentation/HTML/3.2/ntcp-MATLAB/index/how%20To%20set%20Windows%20Environment%20Variables%20For%20Windows%20XP.htm

  Is it possible rename the instance in oracle?

  I don't know that I understand you well here. You want to rename an instance or the database itself?

  While export 9i oralce export utility, I get the below error.

  You cannot use a version export utility (10.1.0.2.0) against a database of lower version (9.2.0.1.0). You can take an export with the Oracle 9i itself export utility and which will be read by the utility to import to Oracle 10 g.

• Impossible to install Oracle 11 g Express edition on Windows 8

  I get this message in the wizard to install Oracle 11 g express edition.
  
  Checking instance of oracle XE service: failure
  
  
  Verification of the requirements of the operating system
  Expected result: XP or higher
  Result: Windows 7/Windows 2008 R2
  
  
  Someone please help on this issue, I am very new to this.
  
  Thank you
  Barb
  
  Edited by: 980372 January 7, 2013 13:21

  8 win is not a supported OS-http://docs.oracle.com/cd/E17781_01/install.112/e18803/toc.htm#BABGGAJA

  PL use a supported operating system

  HTH
  Srini