Oracle 10g R2 on iScsi Drive (Windows 2008)

Similar Questions

• iSCSI LUN Windows 2008 - ps6010e

  Hi guys

  I have the Virtual Machine that will be used as a Windows 2008 Cluster

  Being my iSCSI SAN I am assigning LUNS to my Virtual Machine is the thing the initial setup in disk management is as below

  Initial configuration

  Disc 1 - data - E

  Bus n ° 0, Target Id 0, LUN 0

  Disc 2 - newspapers - F

  Bus n ° 0, Id, target 1, LUN 0

  Disc 3 - BK - G

  Bus n ° 0, Id, target 2, LUN 0

  Disc 4 - TempDB - H

  Bus n ° 0, Id target 3, LUN 0

  Disc 5 - Quorum - Q

  Bus n ° 0, 4 target Id, LUN 0

  But after I reload my disk management is messed up like this

  After the reboot

  Disc 1 - TempDB - H

  Bus n ° 0, 4 target Id, LUN 0

  Disc 2 - BK - G

  Bus n ° 0, Id target 3, LUN 0

  Disc 3 - Quorum - Q

  Bus n ° 0, Target Id 0, LUN 0

  Disc 4 - data - E

  Bus n ° 0, Id, target 1, LUN 0

  Disc 5 - newspapers - F

  Bus n ° 0, Id, target 2, LUN 0

  

  After the reboot

  

  any ideas guys how do I solve this problem?

  Thank you very much

  I don't think you can 'fix' it.  Since the drive letters are correct, I worry the real disk ID #.   The order comes from the order in which they were connected.

• Oracle 11g client install on crashes windows 2008

  Greetings,
  
  I'm trying to reinstall the client of Oracle 11 g on a Windows 2008 R2 Ent. Server and the installation hangs on the back windows where the last message is:
  
  From Oracle Universal Installer...
  
  Monitor: must be configured to display at least 256 colors greater than 256.    65536 real past
  Preparations for the launch of Oracle Universal Installer from c:\temp\2\OraInstall2012-07-19_12-04-18PM. Please wait...
  
  At this point it just hangs.
  Is there a setting I'm missing?
  I cleaned up the previous installation (directories etc., after you run the deinstall script)
  
  The installActions log file under c:\temp\2\OraInstall < timestamp > display just the first two lines above.
  The installation program creates a < single value > dd_vcredist under c:\temp .txt file that contains the following lines at the end, it seems to stop at this point always.
  Any help would be much appreciated.
  
  + [07/19/12, 12:04:18] finished version checking of Windows Installer. Return code 0 +.
  + [07/19/12, 12:04:18] enter CNavigator::Start +.
  + [07/19/12, 12:04:18] executes all controls +.
  + [07/19/12, 12:04:18] Running system controls.
  + [07/19/12, 12:04:18] SYSTEM CHECK: one instance of Setup running Passed.
  + [07/19/12, 12:04:18] SYSTEM CHECK: rights administrative check Passed.
  + [07/19/12, 12:04:18] SYSTEM CHECK: Minimum NT Version 5.0 spent +.
  + [07/19/12, 12:04:18] SYSTEM CHECK: not runing on 9 x check Passed.
  + [07/19/12, 12:04:18] Running prereq controls +.
  + [07/19/12, 12:04:18] verification of Windows Installer version... +.
  + [07/19/12, 12:04:18] msi.dll loaded ok +.
  + [07/19/12, 12:04:18] looking for: 2.0.2 +.
  + [07/19/12, 12:04:18] Found: 5.0.7601 +.
  + [07/19/12, 12:04:18] Windows Installer version ok +.
  + [07/19/12, 12:04:18] finished version checking of Windows Installer. Return code 0 +.
  + [07/19/12, 12:04:18] PREREQ CHECK: Microsoft Windows Installer 2.0 spent +.
  + [07/19/12, 12:04:18] PREREQ CONTROLS: past +.
  + [07/19/12, 12:04:18] race block controls.
  + [07/19/12, 12:04:18] CHECK BETA: past +.
  + [07/19/12, 12:04:18] enter CNavigator::WindowCreation +.
  + [07/19/12, 12:04:18] enter CNavigator::LoadPages +.
  + [07/19/12, 12:04:18] enter CMsiInstaller::IsInstalled +.
  + [07/19/12, 12:04:18] enter CMsiInstaller::GetProductCode +.
  + [07/19/12, 12:04:18] leaving CMsiInstaller::GetProductCode +.
  + [07/19/12, 12:04:18] leaving CMsiInstaller::IsInstalled +.
  + [07/19/12, 12:04:18] entered Maintenance Mode.
  + [07/19/12, 12:04:18] created page: Page of Maintenance +.
  + [07/19/12, 12:04:18] created Page: Progress Page +.
  + [07/19/12, 12:04:18] created page: final Page +.
  + [07/19/12, 12:04:18] leaving CNavigator::LoadPages +.
  + [07/19/12, 12:04:18] enter CMsiInstaller::RegisterUIInterfaces +.
  + [07/19/12, 12:04:18] leaving CMsiInstaller::RegisterUIInterfaces +.
  
  Thank you
  Alex

  PL, ensure that there are no directories with spaces (e.g. ' install files') being specified or use any where for installation.

  HTH
  Srini

• Failed to open oracle functions after R12 installation on windows 2008 64 bit

  Hi guys
  I installed oracle R12.1.1 on windows server 2008 R2 64-bit, then the application opens but all forms of oracle functions cannot open, the message appear frm-92101, I try the solutions in the net, but no effect and I get another windows which and this message appears when trying to open an another oracle functions
  ""
  program currently running on this computer is attempting to display a message, then
  title of the message:
  E:\oracle\VIS\apps\tech_st\10.1.3\appsutil\jdk\bin\java '-serv ".
  
  
  This problem come when a program is not completely compatible with windows
  ""
  This message when you start windows too, but the path of java inside files of oracle applications, please help me if oracle r12.1.1 compatible with win 2008 64 bit or not?

  I installed oracle R12.1.1 on windows server 2008 R2 64-bit, then the application opens but all forms of oracle functions cannot open, the message appear frm-92101, I try the solutions in the net, but no effect and I get another windows which and this message appears when trying to open an another oracle functions

  Direct installation of R12 on Windows 2008 64 bit is not supported. You install it on a Windows 32-bit operating system, and then migrate to Windows 64 - bit.

  Oracle E-Business Suite installation and upgrade version Notes 12 (12.1.1) for Microsoft Windows Server (32-bit) [ID 761567.1]
  Migration Oracle E-Business Suite R12 to Microsoft Windows Server 2008 R2 [ID 1188535.1]

  Thank you
  Hussein

• Can't seem to find the native oracle 32-bit cleint for a Windows 2008 64 bit op

  Hello
  
  We have a Windows 2008 (64-bit) server and that you have installed oracle 64-bit client out there.
  
  Have a third-party application which is usggesting also need a client native 32-bit oracle.
  
  Peeked on otn but can't seem to find. For 64-bit operating systems can't see oracle 64-bit client.
  
  Ideas/links appreciated.
  
  Thank you

  user5716448 wrote:
  that is, no client 32-bit for the client operating system 32 bit and 32-bit operation for 64-bit operating system?

  There is no client 32-bit for the 64 bit OS, use standard 32-bit client on 64-bit operating system.

• Video driver Windows 2008 R2

  I read the articles, that is to say http://www.Boche.net/blog/index.php/2010/03/28/Windows-2008-R2-and-Windows-7-on-vSphere/ , on VMware Tools now including a video driver to work for 2 k 8 R2.  I'm under ESXi 4 U1 with all the patches, but when I install a new virtual machine that is running R2 and install VMware Tools, I don't see the folder C:\Program VMware Tools\Drivers\wddm_video that I can upgrade the driver to.  In fact, I see not all records related to drivers.  What Miss me?  Is there any place I can download the drivers from outside VMware tools?

  Hello.

  I don't see the folder C:\Program VMware Tools\Drivers\wddm_video can I upgrade the driver to.

  This is the wrong path.  It is located in "C:\Program Files\Fichiers Files\VMware\Drivers\wddm_video"

  Good luck!

• Oracle 9.2.0.8 on windows 2008 R2 64-bit client installation

  Dear expert database;
  
  for specific needs, we need to install a client 9.2.0.8 to have connectivity with various databases.
  
  As I am a beginner in Oracle, can you tell me if it's good?
  
  1st part of client install Oracle 9.2.0.1 full (in architecture 32 or 64 bits?)
  
  2. install the patches 9.2.0.8 Group (in the same architecture as the first installation)
  
  3. install Patch 30 with O-Patch
  
  I have a lot of problems to find good sources for the OS/Architecture (windows 2008 R2 64-bit) version, I'm not sure that the old version of Oracle can be installed on this configuration.
  
  Can someone help me and tell me that it is possible to do?
  
  Thank you very much.
  
  Kind regards
  
  Thibaud.

  Salvation;

  I suggest to you please read on

  Client / Server / Support of interoperability between different Oracle Versions [ID 207303.1]
  Note to master for the Installation of the Oracle database [ID 1157463.1] Client

  Respect of
  HELIOS

• my software oracle 32 or 64-bit on Windows 2008 server (64-bit)

  I have a Windows 2008 Server(64-bit OS) in which oracle software are already installed (32-bit and 64-bit). But I do not know how to find the 32-bit oracle House and who is the oracle 64-bit home. I don't know when it was installed. I just want to know how could I check the address bit for oracle.
  
  Thanks in advance for the help.
  
  Kind regards
  Imran khan

  There are several ways (including those who work for only client installations) of MOS/metalink:

  How to check the size of Word (32 bit vs 64 bit) of the Oracle binary on systems MS Windows [465060.1 ID]

  Never tested, but this tool (filever.exe) should show the wordsize of an executable file or a dll:

  http://support.Microsoft.com/kb/913111

  Edited by: oradba the 23.11.2011 15:12

• Connect to the server, Oracle, 11.2.0.1.0, Windows 2008

  There are two Windows 2008 Server: SIGA (database server), SIMBA (application server).
  
  On GIS, Oracle 11.2.0.1.0 database has been installed. It's tnsnames.ora reads as follows. Execution "TNSPING SIGA" works very well. TNSNAMES is used to resolve the name.
  
  
  GIS =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = TCP) (HOST = SARABI.lionsland.local.de)(PORT = 1521))
  )
  (CONNECT_DATA = (SERVICE_NAME = ORCL))
  )
  
  The SIMBA, Oracle Client 11.2.0.1.0 has been installed. It's the tnsnames.ora is identical to the above. Running "PING SIGA" works very well. The name is resolved to 192.168.1.201. However, execution 'TNSPING SIGA' fails "12535 TNS Timeout". The track is given below. I don't understand where is the problem.
  
  Michael G. Schneider
  
  
  
  AMT Ping Utility for 32-bit Windows: Version 11.2.0.1.0 - Production on 23-OCT-2010 11:37:11
  
  Copyright (c) 1997, 2010, Oracle. All rights reserved.
  
  -TRACE CONFIGURATION INFORMATION FOLLOWS-
  New flow path is C:\temp\oracle\tnsping.trc
  New trace level is 16
  -CONFIGURATION OF THE TRACE INFORMATION ENDS.
  -THE INFORMATION SOURCE PARAMETER FOLLOWS-
  Attempt to load system pfile source C:\Programme\Oracle\admin\product\11.2.0\client_1\network\admin\sqlnet.ora
  Source of the setting successfully loaded
  
  -> PARAMETER TABLE BURDEN RESULTS FOLLOW < -.
  Load table parameter successful
  -> PARAMETER TABLE has THE CONTENT FOLLOWING < -.
  TNSPING. TRACE_LEVEL = SUPPORT
  NAMES. DIRECTORY_PATH = (TNSNAMES)
  TNSPING. TRACE_DIRECTORY = C:\temp\oracle
  SQLNET. AUTHENTICATION_SERVICES = (NONE)
  -THE SOURCE INFORMATION ENDS PARAMETER-
  -THE CONFIGURATION LOG INFORMATION FOLLOW-
  The log stream will be 'rudder '.
  Validation log stream has not requested
  -LOG CONFIGURATION INFORMATION ENDS-
  
  nlstdipi: entry
  nlstdipi: output
  nnfun2awanm: entry
  nnfgiinit: entry
  nncpcin_maybe_init: default name server's domain is [root]
  nnfgiinit: installation read the path
  nnfgsrsp: entry
  nnfgsrsp: get the path of names.directory_path parameter or native_names.directory_path
  nnfgsrdp: entry
  nnfgsrdp: path of configuration:
  nnfgsrdp: check TNSNAMES element
  nnfgsrdp: defined path
  nnfun2a: entry
  nlolgobj: entry
  nnfgrne: entry
  nnfgrne: will read if path adapters
  nnfgrne: switching adapter TNSNAMES
  nnftboot: entry
  nlpaxini: entry
  nlpaxini: output
  nnftmlf_make_local_addrfile: entry
  nnftmlf_make_local_addrfile: failure of the construction of the local names file
  nnftmlf_make_local_addrfile: output
  nlpaxini: entry
  nlpaxini: output
  nnftmlf_make_system_addrfile: entry
  nnftmlf_make_system_addrfile: file system names is C:\Programme\Oracle\admin\product\11.2.0\client_1\network\admin\tnsnames.ora
  nnftmlf_make_system_addrfile: output
  nnftboot: output
  nnftrne: entry
  nnftrne: original name: SIGA
  nnfttran: entry
  nncpdpt_dump_ptable:---C:\Programme\Oracle\admin\product\11.2.0\client_1\network\admin\tnsnames.ora TABLE has THE CONTENT FOLLOWING.
  nncpdpt_dump_ptable: SIG = (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP) (HOST = SARABI.lionsland.local.de)(PORT = 1521))) (CONNECT_DATA = (SERVICE_NAME = ORCL)))
  nncpdpt_dump_ptable:-TABLE of END C:\Programme\Oracle\admin\product\11.2.0\client_1\network\admin\tnsnames.ora---
  nnfttran: output
  nnftrne: using address tnsnames.ora (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP) (HOST = SARABI.lionsland.local.de)(PORT = 1521))) (CONNECT_DATA = (SERVICE_NAME = ORCL))) for name sarabi
  nnftrne: output
  nnfgrne: output
  nlolgserv: entry
  nnfggav: entry
  nnftgav: entry
  nnftgav: output
  nnfgfrm: entry
  nnftfrm: entry
  nnftfrm: output
  nnfgfrm: output
  nlolgserv: output
  nlolgobj: output
  nlolfmem: entry
  nlolfmem: output
  nnfun2awanm: get the path of the sqlnet.ora
  nnfun2awanm: getting the name of the adapter
  nnfun2awanm: output
  nscall: entry
  nsmal: entry
  nsmal: 216 bytes to 0x2cdfe08
  nsmal: output normal
  nscall: connection...
  nlad_expand_hst: expansion SARABI.lionsland.local.de
  snlinGetAddrInfo: entry
  snlinGetAddrInfo: output
  snlinGetNameInfo: entry
  snlinGetNameInfo: output
  nlad_expand_hst: Add IP 192.168.1.201
  snlinFreeAddrInfo: entry
  snlinFreeAddrInfo: output
  nlad_expand_hst: result: (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST=192.168.1.201) (PORT = 1521))) (CONNECT_DATA = (SERVICE_NAME = ORCL)))
  nladini: entry
  nladini: output
  nladget: entry
  nladget: output
  nsmal: entry
  nsmal: 104 bytes in 0x2ce0390
  nsmal: output normal
  nsc2addr: entry
  nsc2addr: (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=192.168.1.201) (PORT = 1521)) (CONNECT_DATA = (SERVICE_NAME = ORCL)))
  nttbnd2addr: entry
  snlinGetAddrInfo: entry
  snlinGetAddrInfo: output
  nttbnd2addr: using the IP host address: 192.168.1.201
  snlinFreeAddrInfo: entry
  snlinFreeAddrInfo: output
  nttbnd2addr: output
  nsc2addr: output normal
  nsopen: entry
  nsmal: entry
  nsmal: 996 bytes to 0x2ce0800
  nsmal: output normal
  nsopenmplx: entry
  nsmal: entry
  nsmal: 2120 bytes to 0x2ce0bf0
  nsmal: output normal
  nsiorini: entry
  nsbal: entry
  nsbgetfl: entry
  nsbgetfl: output normal
  nsmal: entry
  nsmal: 84 bytes to 0x2ce1580
  nsmal: output normal
  nsbal: output normal
  nsiorini: exit (0)
  nscpxget: entry
  nscpxget: output normal
  nsopenalloc_nsntx: nlhthput on mplx_ht_nsgbu:ctx = 2ce0800, nsntx = 2ce0bf0
  nsopenmplx: output normal
  nsopen: transport of opening...
  nttcon: entry
  nttcon: toc = 1
  nttcnp: entry
  nttcnp: creates a socket.
  nttcnp: output
  nttcni: entry
  nttcni: Tcp conn timeout = 60000 (ms)
  nttcni: TCP Connect TO active. Switch to the n. b.
  nttctl: entry
  nttctl: definition of connection in non-blocking mode
  nttcni: try to connect you to 528.
  ntt2err: entry
  ntt2err: output
  ntctst: NTTEST list size is 1 - survey not call
  sntseltst: WRITING tests on socket 528
  sntseltst: FOUND: write on socket 528 request
  ntt2err: entry
  ntt2err: soc error 528 - operation = 1, ntresnt [0] = 505, ntresnt [1] = 60, ntresnt [2] = 0
  ntt2err: output
  nttcni: output
  nttcon: output
  NsError: entry
  NsError: nsres: id = 0, op is 65, ns = 12535, ns2 = 12560; NT [0] = 505, nt [1] = 60, nt [2] = 0; ORA [0] = 0, ora [1] = 0, ora [2] = 0
  nsopen: cannot open transport
  nsiocancel: entry
  nsiofrrg: entry
  nsiofrrg: actu = 2ce153c
  nsbfr: entry
  nsbaddfl: entry
  nsbaddfl: output normal
  nsbfr: output normal
  nsiofrrg: output
  nsiocancel: output
  nsvntx_dei: entry
  nsvntx_dei: output
  nsopenfree_nsntx: mplx_ht_nsgbu nlhthdel, ctx = 2ce0800 nsntx = 2ce0bf0
  nsiocancel: entry
  nsiofrrg: entry
  nsiofrrg: output
  nsiocancel: output
  nsmfr: entry
  nsmfr: 2120 bytes to 0x2ce0bf0
  nsmfr: output normal
  nsmfr: entry
  nsmfr: 996 bytes to 0x2ce0800
  nsmfr: output normal
  nsopen: output error
  nsmfr: entry
  nsmfr: 104 bytes in 0x2ce0390
  nsmfr: output normal
  nscall: output error
  nscall: entry
  nscall: connection...
  nsclose: entry
  nsclose: output normal
  nladget: entry
  nladget: output
  nsmfr: entry
  nsmfr: 216 bytes to 0x2cdfe08
  nsmfr: output normal
  nladtrm: entry
  nladtrm: output
  nscall: output error
  nlse_term_audit: entry
  nlse_term_audit: output
  
  Published by: michael.schneider on the 23.09.2010 02:42

  Hi Michael;

  Please check below notes:
  Troubleshooting Guide-TNS-12535 or ORA-12535 or ORA-12170 error [ID 119706.1]
  TNS-12535 / ORA-12535 about connecting to the database [ID 214122.1]
  Open port 1521 on firewall but cannot connect due to errors: ORA-12535, TNS-12203 [ID 361284.1]

  Respect of
  HELIOS

• Installing Oracle database 11g Release 2 on Windows 2008 server

  Hi all
  
  Please can someone tell if Oracle 11 g 2 is installable on windows 2008 server? or Oracle plans to release a specific version for the Windows 2008?
  
  Thanks in advance.
  
  Bilal

  http://download.Oracle.com/docs/CD/E11882_01/install.112/e10843/reqs.htm#CHDHGGFE

• MD3220i - virtual drives Windows 2008 offline

  After installation of the MD3220i and the initiator configuration iSCSI, I see the LUNS from storage but they are offline and I can do something with them. Any help?

  Problem solved. I was clicking on window partition in _Manager server but it must be done on the disc window.

• Oracle 12 c Standard Edition on Windows 2008 R2 64 bit 12.1.0.1.0

  I have a funny problem here. I installed on Windows Standard edition 12 c and I can connect without any problems by using the command prompt or SQL Developer. The problem I am facing is that, after some time, I can't create a new connection and I am getting a timeout in SQL Developer or nothing happens by using the command line. Connections I created before work always and I see that the database is available - I can run queries in SQL Developer old sessions and everything seems to be there. If I take the database using windows services, then I can create new sessions, reconnect and everything works well. It is the first time I see something like that. Is there something I need to put? A kind of connection pool or something similar.

  Thanks in advance,

  Denes Kubicek

  You need a support account to access the son of MOS. Anyway, I looked in the MOS KB and it seems that the thread has been transformed into a Note:

  Non-anglais 12 c on Windows: by listener connections fail after 2049 attempts (Doc ID 1610310.1)

  And the linked bug is (at 12.1.0.2):

  BUG: 17846528 -CONNECTIONS VIA LISTENER HANG AFTER 2049 ATTEMPTS ON SERVERS NON-ANGLAIS

  The proposed workaound is to create the local "Administrators" Group on the machine.

• Oracle 10.2.0.1 on Windows Server 2008 R2 database

  We have Oracle database 10.2.0.1 server is installed on Windows 2003 R2. We plan to move 10.2.0.1 using RAC installation on new hardware (if any) on Windows 2008 R2. All I can find metalink is-
  "Oracle database release EVERYTHING yet not been certified with Windows 2008 R2"
  
  I wanted to know if I'm right about that. Your help is appreciated. THX.

  That is right. No Oracle software is currently certified on Windows 2008 R2. And there will be only a 10 gr 2 to the client version (10.2.0.5 Server version), first support will be 11 GR 2.

  Werner

• Is Oracle 10g compatible with windows 2008?

  Hi all
  
  Is Oracle 10g compatible with windows 2008?
  
  What are the oracle 10g of the OS compatible with? It is compatible with the VMware environment too?
  
  Concerning
  Arun

  user12273523 wrote:
  Hi all

  Is Oracle 10g compatible with windows 2008?

  Yes

  What are the oracle 10g of the OS compatible with? It is compatible with the VMware environment too?

  Please check

  http://www.Oracle.com/technology/software/products/database/index.html

  Concerning
  Rajesh

• 10g BI publisher Setup get error in windows 2008 R2 64-bit

  HI friends,

  I try to install the 10.1.3.4.1. and 10.1.3.4.2 in the windows 2008 R2 64-bit server.

  Run the setup.exe from the folder its audit and getting spent in the pre requires.

  And is not to open the graphical utility from Installer instead of as its showing an error like

  "setup.exe has stopped working".

  Windows can check online solution of the problem

  close the program.

  I downloaded the software from the following location in the RTO,

  http://www.Oracle.com/technetwork/middleware/bi-Publisher/downloads/index.html

  http://www.Oracle.com/technetwork/middleware/bi-Publisher/downloads/index.html BI Publisher 10.1.3.4.2 for Windows (32/64 bit) (1 GB)

  http://www.Oracle.com/technetwork/middleware/bi-Publisher/downloads/index.html BI Publisher 10.1.3.4.1 for Windows x 86 (765 MB)

  
  

  Please suggest us to go further...

  Waiting for the answer.

  
  

  Concerning

  Kumar
  

  Hello

  Thanks for the replies.

  The problem has been resolved.

  due to unzip the software in the longest trail, we got this error.

  Solution:

  We tried to unzip the software using 7zip.

  and unpacked the software to drive direct c (shortest path as C:\BPM\)

  Then I tried to run the setup.exe file, it worked very well...

  Once again thank you for their support.