My wireless is so slow, but said it's fast

Similar Questions

• WRT110 wireless speed too slow

  Wired connection from the computer to my new WRT110 Acer laptop to dual-core with 2 MB of RAM is really very fast.  (G-band) wireless speed is slower than dial-up or slower.  I can't use it yet!  The signal is strong.  How can I improve speed?  My older work laptop Lenovo sitting right next to my Acer wireless connection is very fast.

  No, not the firewall problem.  I changed the MTU of 'auto' on 'manual' and changed default value of 1500 to 1300.  I don't know what an MTU, but it is an improvement of the DRAMATIC speed on wireless.

• Mail becomes incredibly slow, but only if I download attachments

  Mail becomes incredibly slow, but only if I download attachments (photos, files pdf, etc]

  This has happened a lot lately.

  If I get a message with, say, some photos attached Works Mail very well. However, if I can download files attached to my iMac mail becomes so incredibly slow, even if I delete the email with the files. If I quit Mail and then restart the problem persists... I literally spinning beachball if I want to compose a message... everything still works, but each action takes forever. I tried to rebuild the mailbox, but it does not work. The only way to recover messages to work properly (at normal speed) is to restart the computer.

  All ideas

  [I have 24Go of ram on end of 2012 3.4 ghz iMac with a fusion 3 TB drive]

  Start Safe Mode removes the system caches that can help...

  Follow these steps to start in safe mode.

  1. Start or restart your Mac.
  2. As soon as you hear the startup tone, hold down the SHIFT key.
  3. Release the SHIFT key when you see the logo Apple appears on the screen.

  After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

  To leave safe mode, restart your computer without pressing any keys during startup.

  Then try to download an attachment.

• I'm trying to set up a wireless network and it is said that something does not work with the driver.

  Hi there tried to hook my laptop up to wireless as ethernet cable keeps me tripping. I am complete technophobe and propably have the only laptop that gets used especially to open the door.

  Have tried everything I can think even threaten her with glass of water after trying to connect to the wireless network, that it is said that there is something that doesn't work not with the driver if it means something to you. I have a toshiba, if it helps.
  Thank you
  original title: I hope someone can help technophobe

  It is said that there is something not working only not with the driver

  You probably need to install some network drivers for your wireless card.

  Download drivers

  Visit the manufacturer's Web site and select your computer model (this is usually done in the Support section). You should be able to download drivers for your model. Download the driver (s) and follow the instructions to install - every computer is different, so I can't give you exact directions. You can also try to use Windows Update to get drivers - it is located in the start menu.

  Update of the hardware driver that is not working properly:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Establishment of a network domestic:

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-home-network

  For more information network:

  Start here to set up a home network in Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/start-here-to-set-up-a-home-network-in-Windows-7

  What do I need to connect to Internet:

  http://Windows.Microsoft.com/en-us/Windows7/what-do-I-need-to-connect-to-the-Internet

  Adding a wireless computer

  Set up a wireless network:

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  If your network is wireless, run the wizard to Set Up a network on the computer attached to the router.

  1. open Set Up a network by clicking the Start button, then Control Panel. In the search box, type network, click Network and sharing Center click on set up a new connection or a network and then click on set up a new network.

  2. the wizard will guide you in the process of adding other computers and devices to the network. For more information, see:

  http://Windows.Microsoft.com/en-us/Windows7/add-a-device-or-computer-to-a-network

  Manually add a wireless computer

  1. sign the computer.

  2 open the connect to a network by clicking the network icon in the notification area.

  3. choose the network wireless from the list that appears and then click on connect.

  4. type the network security key or password if you are prompted to do so, and then click OK.

  -You will see a confirmation message when you are connected to the network.

  5. to confirm that you have added to the computer, follow these steps:

  -Open network by clicking the Start button, then Control Panel. In the search box, type network, and then, under center network and sharing, click on view network computers and devices.

• Win2008 r2 active but said winver evaluation version is due due

  Win2008 r2 active but said winver evaluation version is due due

  Hello

  You can find the Server forums on TechNet support, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• wireless connection on windows but not fast web

  Do we have a solution to the problem of wireless works with Windows, but not of Quickweb?

  If you run the wireless configuration secure as WPA2, you will not be able to use internet in quickweb. limitation of the quickweb OS (software). Please have the Basic setting of the network, check, this should work for you.

• WAG54GS allows wireless clients to connect but will not assign IP addresses for full connectivity

  I have three XP 3 computers connected between them in a MS home network via a wired hub and access to the internet through a wired connection to a router WAG54GS.  DHCP is enabled on the router, the IP addresses are correctly assigned and internet access to these computers Wired is not a problem.

  In the past, I've connected also with success of laptops to the internet via the feature wireless router, but having not used that for a while, I think now it will not work.  I tried to connect with laptop computers running XP 2 and Vista Home and the problem is the same.  Laptops find broadcasting wireless router and connect but they are not assigned IP addresses during the phase of "Acquiring IP address" resulting in a "Limited or no connectivity message."  Packets are sent to the router, but none are received in return. It is with the strength of the Signal at 73% and the quality of the link to 100%.  Ipconfig displays no deafult assigned gateway and the IP auto configured to be 169.254.96.1 for example.  Ping the router gives "Destination host unreachable".  Not surprisingly, laptops are able to 'see' other computers wired on the MS. network  These laptops connect correctly to the MS network and internet if I change the wired connection.

  If I check the status of the network wireless router configuration good laptops MAC addresses are displayed, but the computer name and the IP address are missing.  I usually use a protection WEP 128 bit on two channels 6 and 13, but it makes no difference if I change this without guarantee, once again the connection occurs, but no IP address is assigned.  DHCP is enabled in the tab for basic configuration of router from 192.168.1.100 with selected up to 50 users DHCP (and DHCP works very well for cable customers).  The IP address of the router is set to 192.168.1.2.  Wi - Fi router is set to "allow everything".  Default settings are used for the parameters wireless advanced, although I tried to reduce the 100 interbval tag at 50 and the RTS and Fragmentation threshold to 2304.  The policy of Internet access on the router is disabled.

  If I have (for purposes of testing only) connect laptops to one of my neighbors secure networks (there are several) to connect laptops very well so I can access the internet, DHCP works great on laptops.  Firmware is v1.00.08 (I looked this modernization, but while I can identify my router version 1.2 downloads talk about types of Annex A and Annex B are mutually exclusive and I'm not clear I have.  I am also doubtful as to if the firmware upgrade would make a difference, because there is no trace of the upgrade solve this kind of problem and I had the Wireless does not work if long ago).  I'm running out of ideas, is there something that I missed?

  Well in this case you can try to upgrade the firmware of your router, go to the website http://www.linksysbycisco.com/UK/en/support/WAG54GS/download...insert of your router model serach tab... select the correct version of your router... Download the firmware file... save this file on the desktop.

  Follow these steps to upgrade the firmware of the device: -.
  Open a page in Internet Explorer browser on a computer hard wired to the router...
  In the address bar type - 192.168.1.1... Leave the name blank username & password use admin lowercase...
  Click the 'Administration' tab - then click on the 'Upgrade Firmware' under the tab-here, click on 'Browse' and navigate the .bin firmware file and click on "Upgrade"...
  Wait a few seconds until it shows that "the update is successful," after the upgrade of the firmware, click on "Reboot" and you will be returned to the same page OR it will say 'cannot display the Page.

  Now reset your router:
  Press and hold the button of reset for 30 seconds... Release the reset button... Unplug the power cable from your router, wait 30 seconds and reconnect the power cable... Now re - configure your router...

  Once you re-configured settings of your router, and you are able to go online Wired computer, here are some settings that you can configure your wireless router, I think this might solve your problem

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1
  Let the empty user name & password use admin lowercase...
  For wireless settings, follow these steps: -.
  Click on the Wireless tab
  -Here, select manual configuration... Wireless network mode must be mixed...
  -Provide a unique name in the name box of the wireless network (SSID) in order to differentiate your network from your network of neighbors...

  -Set the Standard - 20 MHz Radio band and change the Standard channel to 11-2, 462 GHz... Wireless SSID broadcast should be enabled and then click on save settings...
  Please take note of the name of the wireless network (SSID) because it's the network identifier...
  For wireless security: -.
  Click the sub-tab under wireless > Wireless Security...
  Change the mode of WEP wireless security, encryption must be 64-bit. Let the empty password, do not type in anything... Under type of WEP Key 1 in all 10 numbers please (numbers only and no mailbox for example: your 10-digit phone number) and click on save settings... Please note the 1 WEP key as it comes to the security key for the wireless network...

  Click the settings advanced wireless
  Change the interval of tag to 75 > change the Fragmentation threshold to 2304, change the RTS threshold to 2304 > click 'save settings '...
  Now let's see if you can locate your wireless network and try to connect... And check if you are able to navigate.

• I bought Photoshop elements & elements of Prime Minister to Best Buy 2 years.  Finally opened and I tried to get the serial number online by using the identity card, but said website code is not valid.  They called Best Buy, said that adobe should hav

  I bought Photoshop elements & elements of Prime Minister to Best Buy 2 years.  Finally opened and I tried to get the serial number online by using the identity card, but said website code is not valid.  Called Best Buy, they said that adobe should have canceled activation because it has not been installed in a timely.  How can I get a serial number for installation?

  jotison64 wrote:

  I bought Photoshop elements & first items at Best Buy 2 years.  Finally opened and I tried to get the serial number online by using the identity card, but said website code is not valid.  Called Best Buy, they said that adobe should have canceled activation because it has not been installed in a timely.  How can I get a serial number for installation?

  Work your way through this document in the end, step by step, and finally try to start a chat session. I hope that Adobe will straighten this out for you.

  Contact the customer service

• I paid for package of photography for adobe, which announced including mobile lightroom.  But said mobile lightroom free trial has expired.  It seems that I just need someone to watch my account, but apparently it's impossible as they will allow me only

  I paid for package of photography for adobe, which announced including mobile lightroom.  But said mobile lightroom free trial has expired.  It seems that I just need someone to watch my account, but apparently it's impossible as they will only allow me to communicate with them for the first 90 days of a subscription.

  Hi nwkelley,

  Please sign follows Creative Cloud Desktop App connect and disconnect activate Cloud Creative applications , restart your computer and see if that helps.

  If it doesn't see connect and disconnect to activate Cloud Creative applications

  Kind regards

  Assani

• I have an annual payment (pay monthly) subscription to Adobe Muse, the first month ran the trial, I paid the second month, but said enforcement trial period has expired. What can I do?

  I have an annual payment (pay monthly) subscription to Adobe Muse, the first month ran the trial, I paid the second month, but said enforcement trial period has expired. What can I do?

  Please edit the file hosts for help

  https://helpx.Adobe.com/creative-cloud/KB/CC-cleaner-tool-installation-problems.html

• Just bought 2 updates of Pro XI A. Installation and activation went well on the desktop, but said no laptop activation serial. is valid but cannot find a product calling on this cmptr, even if this window appears A Pro XI upstairs and Pro XI is insta

  Just bought 2 updates of Pro XI A. Installation and activation went well on the desktop, but said no laptop activation serial. is valid but cannot find a product calling on this cmptr, even if this window A Pro XI upstairs and Pro XI is installed. And is NOT in the drop-down list to select a Pro XI product.  What is going on?

  The product 'calling' is your old Acrobat - 9 or X. You need the serial number of this old version.

• I'm unable to install photoshop elements13 as a result of a mistake. It shows no error code but said - this installer does not support installation on a 64-bit Windows operating system. Please download the 64-bit version of Photoshop Elements.

  I'm unable to install photoshop elements13 as a result of a mistake. It shows no error code but said - this installer does not support installation on a 64-bit Windows operating system. Please download the 64-bit version of Photoshop Elements.

  Download the 64-bit Installer,

  Downloads available:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
  • Acrobat: XI, X | 9,8 | 9 standard
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
  • Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
  • Lightroom: 5.7| 5 | 4 | 3
  • Captivate: 8 | 7 | 6 | 5
  • Contribute: CS5 | CS4, CS3

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• WRT160N V2: Wireless works very well, but cable slow and intermittent

  Get speed and very good wireless connection.  But when I connect the ethernet cable, the speed slows down, and half the time I get error message "unable to connect".  I bought this router in Oct 2009 and so don't know if it needs a firmware update.  Based on other posts, I went to IE - Tools - Internet Options - connections - network settings and décliqués the only thing that was clicked: automatically detect settings.  That does not make a difference.  Yesterday, after some advice on another site, I changed ports on the router and it worked very well for a while.  But today, no port doesn't really realize.

  Try upgrading/re-Flash the firmware on your router.

  Connect to the computer with the Ethernet cable to the router.
  Download the latest firmware from the site Web of Linksys and save it to your computer. Open the router configuration page. Click the Administration tab and switch to the sub tab upgrade the Firmware through the firmware file that you have already downloaded and update on your router.
  After upgrading the firmware on the router, it is recommended that you must reset the router and reconfigure. Press and hold the reset button on the router for 30 seconds. Release the reset button and wait 30 seconds. Power cycle the router and reconfigure.

• C4580 on Macbook. Print the test and scans wireless but said network host is busy when you try to print.

  I installed everything and print a wireless test page. That works, scanning the wireless work. I can see print ink wireless levels but when I try to print the screen I get

  Host "xxx.xxx.x.xxx" network is busy. retrying in 30 seconds...

  But she does not ever print. I think it's just a matter of minor adjustment that anyone has any ideas?

  The test page does not use the computer (uggh) queue service, so often works with the spooler is hung up.

  We will restore the print system:

  -Sys Prefs, Print & Fax
  -Right (Ctrl) click the box of the print queue and select Reset Printing System.
  -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

  If this does not work, you will need to tell me which version of Mac OS X you are using and where you got the HP software.

• HP Photosmart Premium 360 g, can identify my wireless network, but said the WPA is not valid

  It's a family printer used, I've never connected to the front, I downloaded the software and drivers.

  The WiFi radio is on, and it was printed from my computer via a USB connection.

  He repeats just my network password is not valid, and it certainly isn't.

  Have you tried printing and scanning doctor?

  Its here

  www.HP.com/go/Tools

  This tool can help determine if your printer on the network of law etc.