My XP PC will not connect to my printer Epson...

Similar Questions

• Scanner will not connect to my printer HP deskjet 3050

  I recently bought a printer HP Deskjet 3050 all-in-One series, scanner copier J611 a.  My operating system is Vista 64.  I received the error message is "Scanner not connected to the computer."  Everything worked, and then all of a sudden the scanner no longer works (print and copy of the works).  I tried to use the printing HP and Dr. Scan to try to solve the problems, but it did not help.  I also tried other solutions I found on the HP site.  Finally, I just uninstalled and reinstalled.  It did not help.  I can still print and copy but will not scan.  I need the scanner, more than anything I have an another printer/copier HP that I can use.

  I tried to analyze using the Wi - Fi connection but couldn't. I have not tried to use MS Paint. I saw in another thread, the proposition that, using a key USB cable might work and I tried it and it worked. It's a little embarrassing, but the key is that I can scan now. Thank you very much.

• Photosmart 6520: printer is fine but the scanner will not connect to the printer

  Since the update to windows 10 my printer works fine, but my scanner is not connecting to my computer!  I tried looking for updates as suggested, but it goes on to say that he didn't... Please help its driving me crazy!  Thank you

  Hi @queenbee12,

  Looks like the scan drivers may not have been installed correctly. Please, try the steps in this document to see if it helps. Skip step 3, because it is the different software for your model. Let me know the results of step 5.

  HP printers - a Communication or connection error is displayed when scanning.

  In the workarounds section scan, try these applications to see what results you have.

  If the driver is installed correctly, you should be able to use the Capture and scanning HP.

  Please hold me. Thank you.

• Computer does not connect to the printer epson stylus CX3810.

  Original title: computer will connect to the printer because the loader program does not list the stylus CX3810 epson and I can't find a few good sub. The printer worked ok before two days ago.

  Can not recharge my Epson stylus CX3810 because it is not listed in the list of available printers. It worked fine yesterday.

  Hello

  1. what operating system is installed on the computer?

  2 have you made any changes to the computer before the show?

  Method 1: Uninstall and reinstall printer

  See the following article:

  Install a printer

  http://Windows.Microsoft.com/is-is/Windows7/install-a-printer

  Method 2: Because it worked yesterday, you can restore the computer to a date where it worked fine before.

  Reference:

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

• Computer will not connect to the printer over the network. How can I configure the fax as well?

  I'm new here and just beyond frustrated trying to get this to work for my office.

  My other printer works by USB because my computer give me a warning throughout the day that the USB is corrupted. Anyway, I got a new printer and I am trying to connect through the network. My iPhone prints through it. My computer OS is Windows 7 64 bit.

  My printer is HP Officejet Pro 8600 all-in-one

  I want to connect from the network, and I want to set up the fax. My phone does not work when I plug the line in the printer then phone ext line into my phone.

  I'm confused! Help someone! Please, I beg you!

  Hi ahagereo,

  To connect the printer to your network, follow the steps outlined in the document below.

  http://support.HP.com/us-en/document/c02886889

  Fax: Make sure you have the telephone line connected to the port of line 1 to the back of the printer.

• HP Laserjet P3015dn: P3015dn pilot will not connect to the printer

  Hello. We provide that HE supports for a number of hotels, and for about a month, we had problems with a number of printers P3015 different properties not being not able to print. This is shared through Windows 2008 R2 servers network printers. The problem when the drivers are installed directly on the computer of the user (Windows 7 Pro).

  The printer is connected and accessed via a web browser. When a test page is sent, no data seems to go to the printer. There is no error in the printer event log. After awhile, an error is displayed for the printer in "devices and printers". There is no specific error given.

  The installed driver is universal PCL6 because there is no specific driver for this printer.

  I would like to know if it is a common mistake that has resurfaced recently. For the moment, we have this problem in 4 separate hotels. P3015s most are a few years old but is new and still under warranty.

  Update: installing drivers PS does not solve it either.

  One of my colleagues managed to solve the problem of despair. Seems the printing services for the port has been disabled on printers. 4 printers in 4 different sites. Don't ask me how it could happen, but that's all you need to do...

  ENABLE 9100 IN MAMT. PROTOCOLS

  

• Laptop will not connect to the printer

  Hello.. I tried several of the suggestions in this area, but none seems not to work. I have problems with the laptop (HP Pavilion) running vista 64-bit. The main computer which is where the printer and modem are connected is on vista 32 bit. I thought it was a problem of... downloaded driver download drivers 64 bits to LEXMARK (p4350). Downloads, starts the process of intstallation, she can never finish the installation as iI comes to a point where I change the local port to the printer-name of computer name... Then, he goes in the wizard and asks the printer... It does not appear in the list, and I try to go in the C\drivers\folder. (ect.) where the new download is installed. Always get the .inf file cannot find... I still see that the printer in the network-it just keeps giving me the error... The server for the lexmark no has not the correct driver... takes back me to the previous step... It's driving me crazy... have spent countless hours trying to understand. any help?

  Hi sandielez3

  You can download and install the firmware update and then reinstall the printer with the driver Windows Vista driver.

  Before you install the driver, please uninstall the driver exist.

  Remove the printer

  1. click on the "Start" button, type PRINTERS in the start search box and press ENTER.

  2. find the icons that are associated with the printer, and then remove them.

  3. right click on the blank part of the window and choose "Run as Administrator"-> "Server Properties".

  4. on the tab drivers, select the printer listed and click Remove. Please, select Remove driver and driver package.

  5. open the start menu, enter APPWIZ. CPL in the search box and press ENTER to launch the "programs and features".

  6. try to remove all related printer software.

  Reinstall the driver. After that, follow the steps below.

  Add a shared printer

  1. click on start, click on Control Panel and double-click Printers.

  2. the keyboard, press Alt, and then click the file-> run as administrator-> add printer.

  When the UAC window appears, click on continue to go.

  3. Select "add a local printer.

  4. Select create a new port ". Select "Local Port" as the port type.

  5. in the "Enter a port name" box, type the address in the following format.

  \\[IP address of the host computer]------[the share name of the printer]

  And then click Next.

  6. follow the instructions to complete the installation. During the installation, when you lorsque vous etes are invited to choose a good driver; Click the "disk".

  7. navigate to the file .inf. click OK.

  8. wait until the process ends.

  If the problem persists, the driver may not work with shared printers. I suggest you contact Lexmark technical support and confirm if there is a problem in their drivers.

  http://www.Lexmark.com/Lexmark/sequentialem/home/0, 6959, 204816596_689444666_0_en, 00.html

  Please visit these links to learn more:

  http://Windows.Microsoft.com/en-us/Windows-Vista/install-a-printer-on-a-home-network

  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-home-network

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  After back and let us know if it helped to solve your problem.

  Thank you and best regards,

  R uma - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• iPhone 7 will not connect to iTunes - request for the new version, but everything is up-to-date

  My new phone will not connect to iTunes on my computer windows laptop. It is said that it requires a newer version of iTunes but the latest version is all ready to date

  Is your "new version" iTunes 12.5.1.21? If this is not the case, your 'windows' laptop running Windows XP or Vista?

• How is it that my iPod Shuffle will not connect to my radio?

  How is it that my iPod Shuffle will not connect to my radio?

  Don't understand the question...  How you expect an iPod shuffle to connect to a radio?

• iPad will not connect to internet

  Hello

  Recently I replaced my router wireless with an old faithful that d-Link DSL - 502T cable modem as I have now 2 extreme airport to handle a Wi - Fi. I have now a much faster internet access on my Macbook Pro, but my iPad 2 now will not connect to internet.

  Airport utility on the iPad shows that the internet is disconnected, but I don't know how to solve this problem.

  The two airports are configured in Bridge mode. Help someone?

  If you have LAN - 502T running as the main router.

  Bridge the airport should simply pass the DHCP via the Dlink but sometimes it's a failure.

  The two AE connected directly to the modem or the other?

  I would recommend the static method of intellectual property.

  https://discussions.Apple.com/message/25135547?ac_cid=tw123456#

  In this method, you must first AE plugged directly to the Dlink and the second AE connected in the first and bridge... it will dhcp to EI and is often a better configuration with Apple gear. Worth a try.
  

• Printer will not connect via USB

  HP lj1022 printer will not connect not not via the USB port after the installation of the new driver upgrade hp lj1020/1022 for Windows 7 (64-bit). Driver seems to install properly until the moment where he is asked to connect the USB cable. Then he hangs up. HP lj 1020 printer appears in the display to the dashboard as the default printer. Computer recognizes the printer as hp printer lj1022 but in another "device not specified Panel when and only when the printer is on and the USB cable is connected." When printing, nothing ever comes from queue.

  Diagnosis is only that something is stuck in the queue and remove the task from the queue, but does not. Diagnostic shows no problem.

  The lj1022 printer accepts data from two other computers, as well on Windows xP and using the same cables. Three other USB ports have been tested on the new Windows 7 computer without results. The USB ports on the Windows 7 computer accept keyboards, mouse and flash memories wireless dongle without problem. The Windows 7 computer also sends data to a printer wireless with no problems.

  Hi Rmhodgson,

  Run the following utility below.

  http://support.HP.com/us-en/document/c02073861

• HP Officejet 6500 a: printer will not connect to the wireless network.

  I got this HP printer for a while and it worked fine.  Our old router is out and we had to get a new one.  Installed perfectly and printer continued to work properly.  The password for the router was ridiculous, that's why I changed it to something much more simple to remember.  Since then, my printer will not connect to wireless internet.  I have a ~ and reinstalled the printer but still have the same problem.  I thought maybe to try the former password would, but who does not work either.

  Anyone has any ideas that might help before chuck it and go and get a new one altogether?

  Thank you.

  Easy things first.  Turn off the router and the printer.  Turn on the router and wait 3 minutes.  Turn on the printer and see if it connects to your router.  Status?

  If no joy, temporarily disable all security in the router.  Now try to connect the printer to your SSID not guaranteed without password.  Status now?

  If OK, go back and add WPA2-AES with your simple password.  Status now?

• My Ipad mini will not connect with my wifi at home.  Other devices are able to connect with wifi.  I repeatedly entered the wifi password, but this is not ACCEP it.  Worked very well.  I turned the mini ipad market and nothing.  Help!

  My Ipad mini will not connect with my wifi at home.  Other devices are connecting with the wifi at home.  I turned the mini ipad market a few times and nothing. He recognizes wifi but when I touch the password, it continues to request the password.  Help!  It was working fine earlier in the day.

  What has happened with your iPad since earlier today, when it worked? updated App or iOS? nothing at all

  If your iPhone, iPad or iPod touch connects to a Wi - Fi - Apple Support network

• iPod Touch will not connect to iTunes

  My iPod Touch will not connect to iTunes. When I connect it to my laptop with the cable my laptop USB recognizes the iPod begins to charge and 10 Windows asks me if I want to open it to view files, but it seems to treat it as a camera and I just want to know if I want to get pictures on it and on the laptop.

  I made sure I have the latest software updates on the iPod and iTunes and thought this would fix the problem, but iTunes still does not recognize my iPod because it never appears on the Panel for me to sync things for her, etc.

  How can I get my iPod to be recognized by iTunes again? Very recently, it stopped connecting.

  If your computer does not recognize your iOS device, follow the steps proposed by Apple.

  https://support.Apple.com/en-us/HT204095

• L850 satellite will not connect to Wifi

  Hi, new here.

  I have a Toshiba L850 which does not connect to wifi,
  Many other devices in the House and the L850 was last week.

  You can see my router but will not connect.
  It is the 'limited access' connection, but not more.
  Said troubleshooting couldn't identify the problem.

  When I try and access the Device Manager, I get a "Explorer.EXE" the specified service does not exist as an installed service?

  Help.

  Paul.

  > He sees my router but will not connect.

  I guess that your router is secured by encryption (WEP or WPA / WPA2)
  Test WiFi connection without the use of WLan encryption settings.
  Turn off in the router settings and test the connectivity.

  Of course you need to do that just for test purposes because it s not advised to use the unsecured WiFi.

  Where you have no problem to connect the laptop to 'open' WLan, I recommend changing the encryption type.