WLAN on P100 connection problems

Similar Questions

• NB200-10Z - WLan and Lan connection problems

  Hello

  all I bought the NB200 & I'll put up the wireless connection. Everything seemed fine, but now I'm in trouble.
  On the network connections page, it shows the network connection wireless as "not connected".

  On the Network Setup Wizard, it shows the connection of wireless (atheros AR9285 adapter) & the connection to the LAN (Realtek) but says that they are disconnected.

  Any advice on where to go next would be very appreciated. (FYI, the modem is Speedtouch ST585)

  Matt

  Go to this page:
  http://APS2.toshiba-tro.de/WLAN/
  Update the WLan driver.

  I m not a NB200 owner but one of my friends has a NB300 and there was an option in the BIOS which enabled and disabled the Wlan
  Check in BIOS if this option is available in your case too

  Keep in mind that you use the right SSID, encryption right, the right encryption password and disable the MAC on your filtering router.

  Welcome them

• Connection problems wireless Broadcom 1704 after upgrade to windows 10

  Connectivity problems after upgrade to windows 10 intermittent wireless;  Have an Inspiron 5748 with adapter Broadcom 1704.  Driver is up to date: 7.35.295.0.  Diagnostic shows no problem with the unit.  Will be generally connect to the network, but the connection is deleted intermittently.  Troubleshooting to solve using leads to restore connectivity, but it will then drop again intermittently.  Never experienced problems before windows upgrade 10.

  steveshuff,

  Here are a few parameters to change on your adapter wireless for better performance.

  Turn on and off then on all devices on the network

  1. Turn off the power to the broadband modem and let the modem broadband disconnected for at least 3 minutes.
  2. Shut down all computers that are connected to the network.
  3. Remove power from the wireless router.
  4. Check that a network cable is connected the modem to broadband in the Internet or the wireless router's WAN port.
  5. Check that no series cables or USB are connected to the Modem on broadband.
  6. Connect the power supply to the modem broadband. Wait at least 2 minutes for the Broadband Modem to initialize.
     (If the Modem does not provide Internet connection successfully, unplug the Modem. Wait at least 5 minutes, then plug the Modem back.)
  7. Connect the power supply to the wireless router. Wait at least 2 minutes for the wireless router to initialize.
  8. Turn on the computer and try to connect to the Internet.

  Difficulty of wireless network connections

  Turn off airplane Mode

  For Dell Wireless adapters:

  1. In the Search box, type Device Manager.
  2. Press or click (Control Panel) Device Manager.
  3. In the Device Manager window, click on the sign of the arrow next to network adapters.
  4. Double click or double-click the Référence Dell Wireless WLAN Card.
  5. Click the Advanced tab.
     Note: These options are not available according to the installed wireless adapter.
  6. In the property: box highlight AP Compatibility Mode, select broader compatibility under value: from the menu drop-down.
  7. In the property: box, highlight the Minimum energy consumption, select disabled under value: from the menu drop down.
  8. Click OK.

  For me, to help troubleshoot, please click on my DELL-Jesse L and send me a private Message with the number of Service Dell and your Dell order number.

• AppStore connection problem!

  Hello

  I'm running a 21.5 "iMac with OS X El Captan 10.11.5. My problem is that I am not able to connect to iCloud and the App Store on my Mac.

  The error I get is "there was an error connecting to server Apple ID"

  The same username and password works perfectly well on the site of iCloud, my app store on the iPhone and the iPad, but not on Mac.

  What is the way my iMac communicates via the internet? We have a firewall. And oh, the software update for El Capitan is downloading as I type; He didn't even ask for IDs, just started downloading automatically. The same thing happened yesterday with the updates listed on the tab Update on the app store - they have been is downloaded yesterday without asking my login details but it was a rare event; connection problems I described above took place during the last month or so.

  How can I fix?

  Thank you!!

  Try disconnecting all the services using your Apple ID on your iMac, iTunes, FaceTime, iMessage and try to sing.

  If you cannot connect to the iTunes Store - Apple Support

• Connection problems can not connect I forgot my password I did ' get the confirmation email.

  Cannot connect connection problems I forgot my password I have request a Reset password but I did ' t get the confirmation email.

  Go through the logon process. When you enter your name / password
  should be a link I forgot the password. Site more to have that.

• Why do I get "Connection problem" on my laptop, when I try to access my e-mail account Yahoo with the new version of Firefox?

  Since I updated firefox to 29.0.1 on my desktop, I can't access my account at Yahoo.com from my ASUS laptop. "Connection problem" appears when he tries to retrieve new messages. I received mail on the ASUS 12/03/13, but from now on I get this message and no new mail arrives at the ASUS.

  Some problems occurs when your Internet security program was set to trust to the
  a previous version of Firefox, but no longer recognizes your updated as version
  level of confidence. Now how do I solve the problem: to allow Firefox to connect to the Internet
  Once again:

  • Make sure your Internet security software is up-to-date (for example, you are using the latest version)
  • Delete Firefox to list your program of trusted or recognized programs, then add it again. For detailed instructions, see Configure the firewall so that Firefox can access the Internet.

• Strange internet connectivity problem

  Hello!

  I'm having a connectivity problem I have never met before. I use a wireless router from Apple with internet cable.

  Yesterday, my computer would be is no longer in contact with my router wi - fi. I get a message that the network could not be attached (I ran the Diagnostics wireless, but it's a whole lot of sense to me empty files). However, I also have a Roku, and which IS connected to the WiFi without problem. I completely stopped and restarted the computer, no joy. Reset the modem and the router, no joy. Still works with Roku, not with the computer. But the weird part is, I have Optimum Online, which allows subscribers to log-in to its hotspots, and it worked! I am connected Optimum wi - fi network on my computer right now.

  So I don't know where is the problem! It is not the router, because this is related work with Roku and is not the computer, because it is connected and working with the Optimum hotspot. What gives?

  Try this!

  Go to the Apple menu > System Preferences > network

  Select a Wi - Fi connection in the sidebar and then click on the button "Advanced...". "in the lower right corner of the screen

  In the list of preferred networks, delete the name of your Wi - Fi network

  Click on the "OK" button to save that change and then 'apply' in the network preferences window.

  Now, go to the Applications folder > utilities > Keychain Access

  Make sure that "Login" keychain is selected and "All items" in the category is selected in the sidebar

  Use the search field to find items that Keychain with the name of your Wi - Fi network and remove

  Quit Keychain Access

  Now try and access your Wi - Fi network

• Icloud connection problems

  Hi - I've changed my Apple ID a year ago.

  For these last days, I get messages saying: my Mac cannot connect with icloud and gives the e-mail address of old and obsolete, that I stopped using it a year ago. I ' ved checked my details with the system Apple ID. Everything is up-to-date. Checked the system does not recognize the old e-mail address or the password tied to it.  How to stop the message saying that there is a connection problem?  Thank you very much

  Can you go into System Preferences/iCloud and log out of the old ID? Then log in with the ID of the new?

• connection problems with the version 6.18.0.106

  Hello

  I have Windows XP and I have always used an earlier version of Skype, but now the old version is retired and I can't use it. So I download the new version 6.18.0.106, but this one has a connection problems. Every 4 seconds, I am offline and then online again for 4 seconds. My connection is OK and my provider does not block Skype calls. Is there anyone who knows how to fix?

  Try to uninstall the latest version and install the older version of Skype 6.14.0.104:

  http://download.Skype.com/MSI/SkypeSetup_6.14.0.104.msi

• Connection problems: Win7, Skype 6.14

  Hello

  I had connection problems since just after I did a windows update last night. (no idea if it's just a coincidence?)

  I read through several other posts here, tried reinstalling Skype several times (also re-installed an older version), checked the compatibility mode and still no joy. Oh, I restarted a few times too.

  I'm trying to connect using my Skype username and password (I don't have an account of ms) but the screen is just stuck there, it says signing in and the whirly thing (term techy lol) is just Dervishes round and round.

  I luuuurv my Skype, absolutely essential for me because I work from home, so I hope someone can help. PLEEEEASE :-)

  Thank you

  Try to uninstall the currently installed version and install the older version of Skype 6.9.0.106 using this msi installer:

  http://download.Skype.com/MSI/SkypeSetup_6.9.0.106.msi

• LJ pro M177fw: eprint center connection problem

  Hello

  today I am trying to add my new printer to my eprint account, but I do not remember my pwd, so I want to co reset the password.

  By e-mail, I received a link

  http://h30495.www3.HP.com/reset_password/xxxxxxxxxxxxxxx

  but it didn't work, the Web server show this error:

  SERVER ERROR

  Oops! Only, something was wrong with our server.

  Try refreshing the page.

  I tried different browser and pc, but I can not reset my pwd.

  Is there a solution to this problem?

  Is the server down for ever?

  Thank you and best regards.

  Roberto

  Hey @Roberto_ITALY,

  Thanks for posting in the Forum from HP Support.

  I understand that you are unable to claim your HP Color LaserJet Pro MFP M177fw in your account ePrint Center due to a connection problem.  I would like to help.

  I don't see this particular error with password resets from time to time.  I have a workaround that can clear up this place for you:

  • Click here.  This will bring you to <www.snapfish.com >.  As the Snapfish site is linked directly with ePrint Center and HP connected, you can try to reset your password as follows - click the connection icon and then "forgot your password":

  

  • Enter the e-mail address that you use to connect to the ePrint Center and click on submit.
  • You should receive a message of automatic reset of password by email - the reset as expected before and then try to use this new password to Snapfish to connect downtown ePrint.
  • If this does not solve your problem of access ePrint Center, please call our Cloud Services to 855-785-2777. If you do not live in the United States / Canada region, please click the link below to get help from your region number.
    
    http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  I hope this helps.  If my suggestion worked in your favor, feel free to give me a virtual h.o.t. by clicking on the 'Thumbs Up' icon below.

  Have a great day!

• Connection problems. Cursor "turns" without touching the keys. Keypad lock. Tracpad disconnects. Need to close and restart before both work again. Any guidance will be appreciated.

  CONNECTION PROBLEMS.

  CURSOR "Runs" AFTER I TOUCH a BUTTON AND THEN the KEYBOARD LOCKS AND TRAC PAD DISCONNECTS.

  NEED TO SHUT DOWN I HAVE MAC AND TURN IT BACK ON AND KEYBOARD WORKS OK.

  IT IS AN INTERMIITANT BUT AN ANNOYING PROBLEM AND I WOULD GREATLY APPRECIATE SOME GUIDANCE.

  Thank you

  Hello

  Please, do not type in capital letters, which is considered yelling that I am sure that you are trying to do.

  Have you had the opportunity to read If your Apple wireless mouse, keyboard or the trackpad will not work as expected - Apple Support ?

• connection problems mouse Apple

  I have connection problems and keeping a Bluetooth connection between my mac mouse for my laptop.

  Try resetting the PRAM and SMC.

  Barry

• Satellite L10-119: OKI 8w Lite printer connection problem

  I have the Toshiba Satellite L10-119 series. I use it with 8W OKI printer. The printer works on USB port. Every day, when I print a ~ 10 pages of the judgment of the printer and XP driver display statement "connection problem". Currently, OKI prints all pages. Only restart helps XP on.

  The operating system is Windows XP and printer has an OKI dedicated for XP drivers. Other USB devices are working properly. I reinstall the Intel chipset drivers, I checked the printer on the other ports.

  Please send a sollution mail: michaljaniszek (at) walla (dot) com

  Hello

  You suggested that all other USB devices work properly on this unit.
  In this case, I guess that it s not a Satellite L10 problem but the OKI printer problem.
  Unfortunately, Toshiba is not responsible for the 3rd party hardware or software.

  However, I studied a bit on the net and found a few questions about the OKI printer problems. There are different issues and all have suggested contacting the OKI support. Well, in my opinion you should also ask the support. There may be more recent driver. Check it out.

  Good luck

• Officejet 4500g510g connection problem

  The printer constantly alternates of connected and disconnected as displayed on the HP Solution Center does not allow me to fax or scan but allows me to print

  Hello VinhLong,

  When you connect a device to a router router assigns the device an IP address. There are two types of these assignments. You have a dynamic IP or static IP address.

  A dynamic IP address can change and is automatically assigned by the router. Whenever you reboot your computer, printer, etc., the router can assign the unit a new IP if for some reason he can't use it. This is the default setting and is what most people use.

  An IP address is an address that you essentially hard-code in the router which tells the router whenever this device connects to the network assign this IP address. Using the static IP address performance and connectivity is generally improved.

  Since you have a connection problem, we should see if we can stabilize the connection hard coding a static IP address on the router and the printer to the printer to use when connected to the router.

  Information about setting up a static IP address were taken from this article for troubleshooting HP.

  The "Printer not found" error message during the Installation of wired (Ethernet) network in Windows XP and Windows Vista

  The article is not completely relate to your problem, but we use it to capture the static IP address instructions.

  The DHCP Dynamic Host Configuration Protocol () service provided by the router can change the Internet Protocol (IP) address on the HP product, which interferes with the network installation. An IP address uniquely identifies the product over the network.

  Follow these steps to assign an IP address does not change to the product by the built-in webserver (EWS).