NB200 - 11 H - igxprd32 error BSOD

Similar Questions

• HP Pavilion 1d45dx g6: Pavilion G6: error BSOD in Windows 10

  Once I upgraded my laptop 10 (64-bit) Windows whenever I would put my laptop to sleep or close the lid and come back, she would but immediately frozen and he would not answer. After a few seconds a blue screen of death with a frowny face would jump to the top. It usually gives me the error code: UNEXPECTED_STORE_EXCEPTION

  Then when I'd start my laptop to be out some time, it will give me a BSOD right at the beginning and it would have a CRITICAL_PROCESS_DIED error code

  Is anyway to fix this? I am very fun that may have windows 10 on my laptop. Given the amount of BSOD I had, I went back to Windows 7 until a solution can be found.

  Sidenote: I also had a similar problem with windows 8, he did exactly the same thing, just like Windows 10. He gave me a different error code: KERNAL_DATA_INPAGE_ERROR.  I went back to Windows 7 on this situation as well.

  Any help to solve this would be awesome! Thanks in advance.

  This is a big update!

  I managed to get my old G6-1c43nr works well on Windows 10 using this meathod! (Please note that not all of the G6 can use this meathod and you must proceed at your own discression!)

  Measures to address this error:

  1. download BIOS revision F.46 (probably you have F.48 or F.49) if available for your laptop (go to Windows 7 drivers > BIOS > Previous Versions).

  2. install the older BIOS

  3 after installing the old BIOS, your laptop most likely does not completely start, he should give a BSOD and reboot, let him do this twice and the third time, should it try to perform a repair of starting WHAT IT WILL (AND SHOULD) FAIL!

  4. after the start of the repair fails, click on 'Advanced Options '.

  5. click on help > advanced options > start parameters

  6. click on restart

  7. When you see the boot settings screen, press '4' on your keyboard

  8. you will then start in safe mode, do not connect to your computer when it is presented with the login screen, simply press Power > restart

  9. you should be able to start completely Windows now

  10. put the computer to sleep and then wake it up, it should now fully work!

  The problem was that the most recent BIOS breaks the way Windows 8/10 read the configuration of SATA and decommissioning of the BIOS fix it.

  Enjoy!

• Critical error (BSOD) on Satellite A300-1MW

  Hello.

  I have problem with critical error on Toshiba Satellite A300-1MW. My operating system is Windows Xp Pro SP2 with the installed drivers that are downloaded from the Toshiba site.
  This is the name of this error:

  STOP: 0X0000000A (0 X 0, 00000002 00000001, 0X000000E8, 0X806E4A16)

  I also did a few screens:

  http://img135.imageshack.us/img135/8246/31807896.jpg

  http://img49.imageshack.us/img49/4004/49760343.jpg

  http://img49.imageshack.us/img49/6674/48394233.jpg

  http://img49.imageshack.us/img49/1567/70847159.jpg

  http://img49.imageshack.us/img49/9399/84576775.jpg

  Can someone tell me how to solve this problem?
  Thanks in advance.

  Post edited by: Tralla20

  Hello!

  On your BSOD, you can search the Knowledge Base Microsoft for this question. You can find good descriptions how to solve problems.
  I searched for you and founded this interesting link:
  http://support.Microsoft.com/kb/314063/

  As for the other problems I can say not easy to understand because s he s is not English but I think that the reason for this is the BSOD so try to solve this first.

  Good bye

• On Safari error bsod 89940201

  unknown website "notwhileiameating.com" loading (I'm reasonably sure that's it). kick back, error message w/Safari icon at the top left, code 0 x 80040201 popped up WARNING not2shut / restarting the corruption of registry data. Call the 855-335-7619. I called, they were in need of remote access, I said no / hung up. But now I'm stuck w/2error messages on my screen, I'm afraid I'm going to that slab my iMac.

  BSOD: dllregistersetting detected 0 x 80040201

  Yosemite 10.10.5 OS

  iMac 21.5, end of 2012

  2.7 GHz Intel core i5

  8 GB 1600 MHz DDR3

  NVIDIA GeForce GT 640M 512 MB

  Help?

  It's a scam of javascript. Do not call the number.

  Force Quit Safari and revive all holding the SHIFT key.

• W3 - 810 driver Power State failure error (BSOD)

  I have a W3-810 Iconia I've upgraded to Windows 8.1 and Windows 10. During a recent update to the 2016 office, I had a blue screen and an error message that a failure of State driver had taken place and the computer needed to restart. After a few moments, the computer restarted and I was able to complete the installation of Office 2016. I remember getting this error during upgrade to Windows 10. Recently, while watching a YouTube video, the Tablet locked up and I got the blue screen again, with the same "Driver Power State Failure" error again. I check the Device Manager and noticed that in the "system devices" all of the "Intel platform dynamics and thermal framework (DPTF)" associates pilots had yellow flags indicating that the drivers did not work properly. When I tried to update the drivers I get a message that the latest drivers are installed.

  Someone at - it recommendations to solve this problem? Should I uninstalled all the drivers DPTF and reinstall? Thank you.

  Update: I drove all DPTF drivers in back to version 6.2.9200.30457 Device Manager and then restarted the computer. I tested the computer to see if I could cause a BSOD pilot State failure occurred earlier today and it does not happen again. I hope that this solves the problem. Thank you.

• Impossible to reinstall Windows XP error: BSOD STOP: 0X0000007E (0XC0000005, 0XF78DA208, OXF78D9F08)

  Original title: BSOD

  tried to reinstall windows xp bsod STOP: 0X0000007E, (0XC0000005, 0XF78DA208, OXF78D9F08 * pci.sys_address more numbers to several numbers and a date stamp.)

  Hello

  1. How are you trying to install?

  2 do you use a full version Windows Setup disc or the recovery disk?

  3. at what stage of installation you get the error message?

  I suggest you try the steps from the link below and check if it helps.

  http://support.Microsoft.com/kb/330182

  Additional information:

  How to fix a computer that does not start: http://windows.microsoft.com/en-US/windows-xp/help/setup/how-to-fix-computer-that-will-not-start

  Hope this information is useful.

• After installation from Pinnacle Systems pctv application error: BSOD 0x0000007e

  Original title: BSOD 0X0000007E (0XFFFFFFFFC0000005, 0XFFFFFA60048143C5, 0XFFFFFA60077B9F8E, 0XFFFFFA60077B91C0)

  I installed a fromPinnacle of application of pctv Systems.  I've updated to the latest version of the software according to the Web of Pinnacle site.  I get a BSOD with the messge stop 0x0000007e (0xFFFFFFFFC0000005, 0xFFFFFA60048143c5, 0xFFFFFA60077B9F8E, 0XFFFFFA60077B91C0) with the information PCTV4XE_amd64.sys address FFFFFA60048143C5 base at FFFFFA600480B0000.  Suggestions before uninstall PCTV?  I am running Vista with the latest upgrades.

  Hello

  I suggest you to try the steps below and check if it helps.

  Method 1:

  Try to put your computer in a clean boot state, and check to see if the same problem happens.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 2: If the problem persists then I suggest you to try the steps from the link below which will help you resolve stop (blue screen) error in Windows 7.

  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  (For Windows vista)

  Method 3: Also try to install all the Windows Update available.

  http://support.Microsoft.com/kb/930979

  Hope this information is useful.

• Error BSOD System_Service_Exception also the Memory_Management BSOD error

  Last year, I built a new computer to coincide with the launch of Windows 7.

  Specifications are the following:

  CPU: core intel i7 920

  RAM: Corsair Dominator TR3X6G1600C8D 3x2GB

  GPU: ATi 5850HD

  Mobo: Asus P6T SE

  OS: Windows 7 Home Premium 64-bit

  For a time, it worked fine, but I started to have problems of gel. They generally produce right after startup, the system could get the extent of loading Messenger, but shortly after, would freeze the mouse and the computer would be completely insensitive. After trying for a few months to get the system to work (and have a wave of 8 weeks where everything worked fine), as well as to test the RAM and even up the motherboard for test sending, I finally gave up and came back to 32-bit of Windows XP. I did it in March, and then until Sunday 24 the computer took place without a hitch. Not a single problem.

  24, I decided to give Windows 7 an another go, with a new drive, I created myself and my own key, as well as remove the Creative sound card, I had used, because a friend suggested that could be the problem.

  For a week the system went very well, however I got a blue screen error 31. Memory_Management. 0x000000001A

  When I restarted from this, the system told me I had 4 GB of RAM, instead of 6 GB. Again, I have played the game for a few hours with only a few hiccups of frame rate. After that I turned off, went out the ram, made sure they were dust, reinserted them and turned on, the system told me I had 6GB again. Just to be safe, I fell memory diagnostic tool Windows 7 #s from 04:30 until about 23:00 the next night. He managed 63 passes and did not find a single error. In the past when I received first freezes, I tested the RAM one by one using memtest86. I placed the RAM in DIMM1 and ran all night, each test would have about 25-30 full passages without errors, so naturally I who ruled out as a cause.

  However tonight, I got another BSOD, it was when the computer was simply idling with a few open programs, namely Firefox, Internet Explorer (maybe, I'm not sure) and Windows Live Messenger. System_Service_Exception. 0x000000003B.

  Reset, I have 4 GB of RAM instead of 6 again.

  I hope someone is able to offer any suggestions as to what I can do at this point. It sems very well as if it was a problem of RAM, but after numerous tests and find no errors in * any * point, I am at my wit's end.

  A failure of this function from NT kernel is linked memory:

  NT! MiPromoteNode + 21

  Nom_image: memory_corruption

  BiosVersion = 0608
  BiosReleaseDate = 11/11/2009
  BaseBoardManufacturer = ASUSTeK Computer Inc..
  BaseBoardProduct = P6T SE

  Please make a update of the BIOS for this version:

  P6T SE 0808 BIOS

  http://www.ASUS.com/product.aspx?P_ID=t4yhK6y9W9o7iQ9E

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Error BSOD BCCode: a

  I got a BSOD here's the info I downloaded any help appreciated, thanks in advance.

  Signature of the problem:

  Problem event name: BlueScreen

  OS version: 6.1.7601.2.1.0.256.48

  Locale ID: 1033

  More information about the problem:

  BCCode:                                               a

  BCP1: FFFFFA801BDCF010

  BCP2: 0000000000000002

  BCP3: 0000000000000001

  BCP4: FFFFF80003B86CB6

  OS version: 6_1_7601

  Service Pack: 1_0

  Product:                                               256_1

  Files helping to describe the problem:

  C:\Windows\Minidump\122214-37315-01.dmp

  C:\Users\Drew\AppData\Local\Temp\WER-76268-0.SysData.XML

  Read our privacy statement online:

    http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:

  C:\Windows\System32\en-US\erofflps.txt

  Hello

  Resolution in Windows 7 stop errors (blue screen) - has a section for if you can or cannot start Windows.
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Check this thread for more information on using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 methods (+ 1 other).

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  
  We can analyze the minidumps if make you it available from the OneDrive or other
  file -sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  Adding files to your OneDrive
  http://Windows.Microsoft.com/en-us/Windows-8/getting-started-onedrive-tutorial

  A disk - sharing files and folders and change the permissions
  http://Windows.Microsoft.com/en-us/onedrive/share-file-folder

  ZIP or download the content of the C:\Windows\minidump

  Use OneDrive to upload collected files

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  ----------------------------------------------------------

  
  BCCode: 0a 0x0000000A

  Check these KB

  Error message on a blue screen on a computer that is running Windows 7 or Windows Server
  2008 R2: "STOP: 0X0000000A"
  http://support.Microsoft.com/kb/979444

  Stop error message on a computer that is running Windows 7 or Windows Server 2008 R2 and
  who has the iSCSI storage: "0x0000000A"
  http://support.Microsoft.com/kb/979711

  Those and 12 other KB Articles are available
  http://support.Microsoft.com/search/default.aspx?mode=a&query=0x0000000A&SPID=14019&catalog=LCID%3D1033&1033comm=1&Res=10

  -----------------------------------

  BCCode: 0a 0x0000000A

  Drivers could be at fault, however the problems of disk or security/antivirus/antispyware products are
  just as likely to be the root cause that they can force a driver to corrupt or go out of bounds.
  The video driver or something affecting it would be questionable.

  Make sure that the drivers, BIOS and chipset of low-level drivers are all updated by checking manually
  system manufacturer and device manufacturers sites.

  Below I'll post a generic bluescreen convenience store and in the next message how to upgrade
  drivers and BIOS as well as controls memory.

  -----------------------------------

  BCCode: 0a 0x0000000A

  Bug Check 0xA: IRQL_NOT_LESS_OR_EQUAL

  Control bug IRQL_NOT_LESS_OR_EQUAL 0x0000000A value a. This indicates that Microsoft Windows or a driver in mode accessed kernel memory paged at DISPATCH_LEVEL level or above.

  Important info if you received a STOP Code

  If you received a blue error screen, or a stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer, Contact Support.

  If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

  These actions could prevent a mistake like this does not happen:

  1. Download and install updates for your computer from Windows Update device drivers.
  2. Scan your computer for computer viruses.
  3. Check your hard drive for errors.

  IRQL_NOT_LESS_OR_EQUAL parameters

  The following settings are displayed on the blue screen.

  Parameter	Description
  1	Memory referenced
  2	IRQL at time of reference
  3	0: read 1: write
  4	Memory address

  Cause

  This bug check is issued if the memory paged (or invalid) is accessible when the IRQL is too high.

  The error that usually generates this bug check occurs after the installation of the faulty device driver or service system, BIOS.

  If you encounter a bug 0xA control during the upgrade to a later version of Windows, this error can be caused by a device driver, system service, an anti-virus or a backup tool that is not compatible with the new version.

  Resolution

  If a kernel debugger is available, get a stack trace.

  To resolve an error caused by the faulty device driver or service system, BIOS

  1. Restart your computer.

  2. Press F8 to character-based menu that displays the choice of operating system.

  3. In the Windows Advanced Options menu, select last known good Configuration . This option is most effective when a pilot or a service is added at a time.

  To resolve an error caused by an incompatible device driver, system service, virus scanner, or backup tool

  1. Check the system log in Event Viewer for error messages that may identify the device or driver that caused the error.

  2. Try disabling the cache in memory of the BIOS.

  3. Run the diagnostics of equipment provided by the manufacturer of the system, in particular the scanner memory. For more information about these procedures, see the manual of your computer.

  4. Make sure that the latest Service Pack is installed.

  5. If your system has cards (SCSI) small computer system interface, contact the card manufacturer for updated Windows drivers. Try to disable sync negotiation in the SCSI BIOS, check the wiring and the SCSI ID of each device and confirming the proper termination.

• For devices (IDE) peripheral electronic integrated, set the built-in as only primary IDE port. Also, check each IDE device to the right setting master/slave/stand alone. Try to remove all IDE devices except for the hard drives.

If the message appears during installation of Windows, make sure that the computer and installed devices are compatible with the version of Windows being installed. For example, you can get information about compatibility with Windows 7 in the Windows 7 Compatibility Center.

Here is an example of debugging: (see this link)
http://msdn.Microsoft.com/en-us/library/ff560129 (v = vs. 85) .aspx

BCCode: 0a 0x0000000A<-- read="" this="">
* 1025.html http://www.faultwire.com/solutions-fatal_error/IRQL-not-less-or-Equal-0x0000000A-

==================================================================

Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.html

-------------------------------------------------------------------------
Also this, so you can see the probable bluescreens.

Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
http://www.winvistatips.com/disable-automatic-restart-T84.html

-------------------------------------------------------------------------

Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
info that would help. Such as ITC and 4 others entered at the bottom left. And all others
error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

As examples:

BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002

or in this format:

Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

It is an excellent tool for displaying the blue screen error information

BlueScreenView scans all your minidump files created during ' blue screen
of death "crashes and displays the information about all crashes in one
Table - free
http://www.NirSoft.NET/utils/blue_screen_view.html

BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
There are other causes.

You can do mode if necessary safe or the Vista DVD command prompt or
Options recovery if your system is installed by the manufacturer.

How to start on the System Recovery Options in Windows 7
http://www.SevenForums.com/tutorials/668-system-recovery-options.html

You can try a system restore to a point before the problem started when one exists.

How to do a system restore in Windows 7
http://www.SevenForums.com/tutorials/700-system-restore.html

-------------------------------------------------------------------------

Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

Enter this at the command prompt - sfc/scannow

How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates cbs.log Windows Vista (and Windows 7)
http://support.Microsoft.com/kb/928228

The log can give you the answer if there is a corrupted driver. (Says not all possible
driver problems).

Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

How to run the check disk at startup in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html

-------------------------------------------------------------------------

Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
keyboard and mouse, as well as of other major device drivers.

Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

How to install a device driver in Vista (also Windows 7) Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

How to stop Windows 7 automatically install drivers
http://support.Microsoft.com/kb/2500967

-------------------------------------------------------------------------

How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
quit unexpectedly
http://support.Microsoft.com/kb/958233

Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
http://www.chicagotech.NET/Vista/vistabluescreen.htm

Understanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692

Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033

-------------------------------------------------------------------------

In some cases, it may be necessary.

Startup Options recovery or Windows 7 disk repair

How to run a startup repair in Windows 7
http://www.SevenForums.com/tutorials/681-startup-repair.html

How to start on the System Recovery Options in Windows 7
http://www.SevenForums.com/tutorials/668-system-recovery-options.html

How to create a Windows 7 system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

How to do a repair installation to repair Windows 7
http://www.SevenForums.com/tutorials/3413-repair-install.html

I hope this helps.

Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Error BSOD always playing source games (TF2, HL2, portal, Portal 2, etc.). STOP: 0X000000D1

  Original title: BSOD error always playing source games (TF2, HL2, portal, Portal 2, etc.).

  It seems that I always get this blue screen error while I play games like TF2 source:

  A problem has been detected and windows has been shut down to avoid damage

  on your computer.

  DRIVER_IRQL_NOT_LESS_OR_EQUAL

  If this is the first time you've seen this stop error screen,

  Restart your computer. If this screen appears again, follow

  the following steps:

  Check to make sure any new hardware or software is installed correctly.

  If this is a new installation, ask your hardware manufacturer or software

  the windows updates, you might need.

  If problems continue, disable or remove any newly installed hardware

  or software. Disable the BIOS memory options such as implementing caching or shading.

  If you need to use Safe Mode to remove or disable components, restart

  your computer, press F8 to select Advanced Startup Options and then

  select Safe Mode.

  Technical information:

  STOP: 0X000000D1 (0XF73B75BF, 0X00000002, 0X00000001, 0X8BAC23CE)

  Tcpip.sys - address 8BAC23CE base at 8BA36000, Datestamp 4e83e463

  Data collection for the crashdump...

  Initialization of the disk for the crashdump...

  Beginning physical memory dump.

  Dumping physical memory to disk: 100
  Anyone can determine the cause of this error? Thanks in advance.

  A value of 0x0000008E KERNEL_MODE_EXCEPTION_NOT_HANDLED bug control a. This bug check indicates that a kernel-mode application has generated an exception that the error handler did not.

  0xc0000005: STATUS_ACCESS_VIOLATION indicates that a memory access violation has occurred

  dxgmms1.sys corresponds to the graphics. I updated your graphics driver to the latest version then check both your memory video and the computer's memory to find mistakes.  This link should help you to do so.

  Hope that helps

• Remove the STOP errors - (BSOD)

  I'm really sick of my blue screen of death issues, not sure how grateful I will be if someone help me dig and find what causes all these BSODS. My PC worked not long ago, now frankly... I'm getting sick and tired of these BSOD.

  Hello

  Stop (sometimes called blue screen or black screen error) error may occur if a problem causes Windows 7 to stop or restart unexpectedly. You might see a message that says: "Windows was arrested to avoid damaging your computer."

  These errors can be caused by hardware and software issues, and it can be difficult to solve the problem.

  Perform the steps from the link below and see if it works.

  Resolve stop (blue screen) error in Windows 7

  Warning of Chkdsk.

  Important: When running chkdsk on the drive if bad sectors are found on the hard drive, then chkdsk attempts to repair this sector. If no data is available while data may be lost.

  Note: make a backup of all your data on an external drive before you perform an upgrade in-place, as this may result in loss of data.

  Good day!

• Strange error BSOD on HP Pavilion dv6t (XW898AV)

  Hello. Sometimes my computer starts late randomly and does not respond. It seems to be related to the graphics card drivers. I'm on the latest version of the BIOS and the graphics drivers from the HP site. However, if I try to reinstall (or even during the first installation, I think) graphics drivers I get a BSOD the drivers not being is not the right one.

  However this BSOD error is unlike the one I've seen before. It happens if I try to leave my computer shut down by itself when it gets all the lag. In the meantime, my a CPU core random would be just to go to 100% and just hang there. There don't seem to be able to resolve itself.

  Here is a picture of the BSOD screen I got.

  The computer specs are:

  Windows 7 Home Premium - 64-bit

  Intel 2nd Gen Core i7 - 2630M

  ATI Radeon HD 6770M

  8 GB RAM

  Any help would be appreciated. Already, I went into the BIOS and made a disc and check the memory and both come clean so you don't need to post that.

  If you had read that last line, you would hav seen that I had already done this but through the BIOS instead of the HP UEFI thing.

  However I found the problem with my computer. For any reason whatsoever, when I wasn't using on power HP Power Manager plans and used the built in Windows instead, it would cause my computer to start to hang really bad if I put the display to sleep and then wake it up and save. Now that I have uninstalled HP Power Manager everything is fine now.

• System service exception and kernel data inpage error BSOD in Windows 8

  Hi all

  I'm excperiencing the Bsod every three minutes, or, on Windows 8, 64-bit.  I read the forum and saw that many people become similar problem, but I'm not sure that this is exactly the same as mine (I apologize in advance if this is, but to my inexperienced eyes, a little different aspect errors), so I thought I would like to ask for suggestions on how to solve this problem. My laptop is Acer, a little over a year and I mainly use it to go to the internet documents and write (I'm not games). The Bsod occurred in the past (but maybe once a month or more), but just for the last 4 days, it has been constant and I can't use my laptop at all (atm I use another computer).

  Regarding the error: the only thing that appears on the blue screen is kernel_data_inpage_error and other times, the error is system_service_exception.

  The problem is that I tried to view the event logs to see what the exact error, but I can't keep the laptop works long enough for me to write down (or screenshot) the details of the error. I managed to see a message that says something bad article on a drive, but I couldn't get more details.

  I would greatly appreciate all advice on this subject,

  With thanks in advance I can't wait to hear your thoughts,

  Pina

  PG

  Please run the Driver Verifier to find the underlying issue

  These accidents were related to the corruption of memory (probably caused by a driver).

  Please run these tests to check your memory and find which driver is causing the problem.

  
  

  If you're overclocking (pushing components beyond their design) return you to default at least until the crash is resolved. If you don't know what it is that you're probably not overclocking.

  
  

  Since then, it is more likely to be a pilot run everything first.

  1-Driver Verifier (for full instructions, see our wiki here)

  
  

  If the auditor does not have the issue we move to it.

  2-Memtest. (You can learn more about running memtest here)

  
  

  If you cannot start after you have enabled the auditor reboot in safe mode

  In Vista & victory (F8)

  When win 8 http://www.howtogeek.com/107511/how-to-boot-into-safe-mode-on-Windows-8-the-easy-way/

  
  

  Co-written by JMH3143

  .

• Windows 8 ntoskrnl.exe errors, BSOD

  I lost my wifi connection, getting a BSOD, then reboot to find my Wifi disabled until I have manually re-enable it. I checked for memory errors and so far I have found nothing. Any person able to provide any idea that I'm missing?

  Landfills are found: here

  Hello

  The attached file of the DMP is the verification of bug BAD_POOL_HEADER (19) .

  This indicates that a pool header is corrupt.

  Error checking 19, {20, fffffa8007a85570, fffffa8007a85590, 4020002}

  1: kd >! pool fffffa8007a85570
  Pool page fffffa8007a85570 region is paged
  fffffa8007a85000 size: 150 previous size: 0 file (allocated)
  fffffa8007a85150 size: 80 previous size: 150 free (free)
  fffffa8007a851d0 size: 80 previous size: 80 (allocated) pair
  fffffa8007a85250 size: size 90: 80 Vad (allocated)
  fffffa8007a852e0 size: 10 size: 90 free (free)
  fffffa8007a852f0 size: size a0: 10 stag (allocated)
  fffffa8007a85390 size: 40 size: a0 MmSe (allocated)
  fffffa8007a853d0 size: c0 size previous: 40 EtwR (allocated)
  fffffa8007a85490 size: 40 size: ReTa (allocated) c0
  fffffa8007a854d0 size: 80 previous size: 40 SeTl (allocated)
  fffffa8007a85550 size: 20 size: 80 (allocated) WfpL
  * fffffa8007a85570 size: 20 size: 20 (free) * Ipng
          PoolTag Ipng: Generic stamps of IP (address, Interface, Packetize, road allowances), binary: tcpip.sys

  Something 3rd party that works closely with the network's originally pool corruption.

  1: kd > k
  Call child-SP RetAddr site
  fffff880 '1c7470c8 fffff803' 33a90ba5 nt! KeBugCheckEx
  fffff880 '1c7470d0 fffff880' 01b7e802 nt! ExFreePool + 0xadb
  fffff880 '1c7471b0 fffff880' 01cd32ac tcpip! IppInspectBuildHeaders + 0x5f2
  fffff880 '1c7474a0 fffff880' 1aa9a111 c:\windows\system32\drivers\fwpkclnt! FwpsConstructIpHeaderForTransportPacket0 + 0x1dc
  fffff880 1 c 747550 00000000'00000008 mwac + 0 x 6111
  fffff880 ' 1 c 747558 fffff880' 00000014 0x8
  "fffff880 ' 1 c 747560 fffffa80 ' 050e0ce0 0xfffff880'00000014
  "fffff880 ' 1 c 747568 fffffa80 ' 050e0d04 0xfffffa80'050e0ce0
  "fffff880 ' 1 c 747570 fffffa80 ' 050e0cf4 0xfffffa80'050e0d04
  "1 c 747578 fffffa80 fffff880 ' 00000011 0xfffffa80 ' 050e0cf4
  1 c 747580 00000000 00000000 fffff880 of ' 0xfffffa80'00000011

  We can see that the Malwarebytes Web access control pilot damaged a pool block header.

  ---------------------------

  Remove and replace AVG and Windows Defender from Windows 8 with integrated VIPRE temporary troubleshooting purposes because they are contradictory and cause conflicts of NETBIOS with Malwarebytes. You have too much security will:

  -AVG removal http://www.Avg.com/us-en/utilities

  Windows Defender (how put on after the withdrawal)- http://www.eightforums.com/tutorials/21962-Windows-Defender-turn-off-Windows-8-a.html

  Kind regards

  Patrick

• Recurrent error BSOD (Bad Pool Header)

  Hi I have a BSOD w / the Bad_Pool_Header errror, it starts very well, then crashes with this error after ive connected.

  Help, please

  GreenShadow9600

  Hello

  To help you, we will need for the. DMP files to analyze what exactly happened at the time of the accident, etc.

  If you do not know where. The DMP files, here's how to get to them are:

  1. go to the folder % systemroot%\Minidump.

  2 copy all the DMP files in the Minidump folder on your desktop and zip then those files.

  3. download the zip containing the. Files DMP Onedrive or a Web hosting of your choice and paste it in your answer. Favorite sites: Onedrive, Mediafire, Dropbox, etc.. Nothing to do with the timers waiting, download managers, etc.

  4 (optional): The type of. DMP files in the Minidump folder are known as small images of memory. In any % there will be what we call a kernel image (if your system is configured to generate). It is labeled MEMORY. DMP. The difference between the small images of memory and core-dumps in the simplest definition is that a kernel image contains much more information at the time of the accident, which allows more debugging of your question. If your upload speed and you're not going against any strict caps bandwidth and/or use, etc., the kernel image is the best choice. Note that the core-dumps are much larger in size due to containing much more information, that's why I mentioned the download speed, etc..

  If you plan to use Onedrive but don't know how to download it, please see the following:

  Download pictures and files to Onedrive.

  After doing this, to learn how to share the link to the file if you are not aware, please visit the following link - share files and folders and change the permissions and view 'Get link'.

  Please note that all programs "cleaner" such as TuneUpUtilities, CCleaner, etc., default will remove. DMP files after use. That said, if you run this software, you will need to allow the system to block one more time to generate a crash dump.

  If your computer does. DMP files, follow these steps:

  1. start > type systemroot which should show the Windows folder, click it. Once inside this folder, make sure there is a Minidump folder created. If not, CTRL-SHIFT-N to create a new folder and name it Minidump.

  2 Windows key + Pause key. This should appear in the system. Click Advanced on the left system settings > advanced > performance > settings > advanced > make sure there is a check mark for "manage automatically the size of pagefile for all readers."

  3 Windows key + Pause key. This should appear in the system. Click Advanced on the left system settings > advanced > startup and Recovery > settings > system > ensure there is a check mark next to "write an event to the system log.

  Make sure Small Memory Dump is selected and ensure that the path is % systemroot%\Minidump.

  4. ensure that viewers is ENABLED:

  Start > Search > type services.msc > on the name tab, search for Windows Error Reporting Service > if the service status is not started, then right-click and select start. Also to ensure that, under Startup Type set to automatic rather than manual. You can do this by right click, select properties and under general selection on 'Automatic' startup type and then click on apply.

  If you can not get into normal mode to do this, please do so via Safe Mode.

  Kind regards

  Patrick