Windows 8 ntoskrnl.exe errors, BSOD

Similar Questions

• Toot of Dell Inspiron 910 windows system32 ntoskrnl.exe error

  I booted up my laptop Inspiron 910 and got the following error message:

  Windows root system32 ntoskrnl.exe missing or corrupt please reload the disc.

  I tried several attempts through the advanced options [F8] and always comes back to the same error message.  I changed the BIOS to allow the disc to load first.  I put the Microsoft Windows XP Home Edition SP3 CD and you press a button to start.  Setup begins to install the files, but then I get the blue screen of death.

  It reads:

  A problem has been detected and windows has shut down to prevent damage to your computer.

  If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps:

  Check for viruses on your computer. Remove any newly installed hard drives or hard drive controllers. Check your hard drive to ensure that it is properly configured and completed. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.

  Technical information:

  STOP: 0X0000007B (0XF7A5E63C, 0XC0000034, 0X00000000, 0X00000000)

  I also run diagnostics and got these error messages:

  Error Code 0F00:0244 Msg: DISK_0_Block 13533192 cannot read, replace the drive or remove the write protection

  I also have the same error codes in the following blocks:

  13533193

  13533194

  13533195

  13533196

  13533199

  13533208-13533215

  13533224

  13537707

  Any assistance or solutions would be useful!

  Thank you

  Hi rmina71,

  ·         Have you made changes on the computer before this problem?

  Follow the steps in the article.

  http://support.Microsoft.com/kb/2022960

• File:\windows\system32\ntoskrnl.exe

  I need serious help!

  Some wonder how I deleted some system 32 - files

  Anyway now I can not connect my computer backinto.

  I am running Vista Business as my OS

  At startup, I wonder to insert my disck installation and restart - does not work - also tried repair - same result

  The error:

  File:\windows\system32\ntoskrnl.exe

  Status: 0xc0000428

  Info: Windows cannot verify the digital signature for this file

  Please can someone help?

  Thank you

  Albert

  Heya,

  Here are some links that may help solve the problem.
  http://social.technet.Microsoft.com/forums/en-us/itprovistaannouncements/thread/4ec59ec4-6532-46EB-9861-203ae54e0ea2/
  http://www.computerhope.com/issues/ch000646.htm

• c:\windows\system32\ntoskrnl.exe is currupt

  Hi gurus,

  I am running vista professional.

  When starting my computer, I get system32\ntoskrnl.exe - cannot verify the signature

  I then insert the disc and choose repair

  A system recovery screen opens with Windows Vista (recovered) - load drivers or next

  A load the drivers of C: or CD?

  I also noticed I have a Boot (x :)) - don't know what it is?

  How can I re-mode Vista?

  In the C:\system32\ntoskrnl.exe when I select

  I get a pop up specified locotation does not provide information about your hardware

  Add drivers?

  Don't forget that I can not open Vista?

  Thank you

  Albert

  Hello

  ·         What is the exact error code or the message you received?

  ·         Have you tried starting mode safe mode with networking?

  I suggest you perform the steps below and check it, if it helps.

  1. boot in Windows Vista CD WinRE.

  2. Rename C:\WINDOWS\system32\ntoskrnl.exe

  3. copy ntoskrnl.exe in C:\WINDOWS\system32 C:\WINDOWS\system32\dllcache of

  4 reboot

  You need to load the driver on the CD: when it asks.

  To reinstall Vista or related topic, please follow the link below.

  http://Windows.Microsoft.com/en-us/Windows/help/install-reinstall-uninstall

  hope this solves the problem.

• Ntoskrnl.exe - ATTEMPTED_EXECUTE_OF_NOEXECUTE_MEMORY - BSOD - Win 8.1

  I have a laptop ASUS ROG very recent with Win 8.1

  Yesterday, for the first time I had a BSOD ATTEMPTED_EXECUTE_OF_NOEXECUTE_MEMORY.

  It's the first time on this laptop and also the first time that I ever had a BSOD since I moved all my PC to win 8 Win 8 launching.

  I ran the Windows Memory Diagnostic tool and all is well, there no problem with memory.

  I also ran BlueScreenView v1.55 Nirsoft and this is the result:

  Ntoskrnl.exe ntoskrnl.exe + 1ae5fa fffff802 '4be1e000 fffff802' 4c5b2000 0 00794000 0x54c832b2 28/01/2015 x 02:52:02 (winblue_r8.150127 - 1500) Microsoft® Windows® NT Kernel operating system & 6.3.9600.17668 Microsoft Corporation C:\Windows\system32\ntoskrnl.exe

  My PC seems to work very well. Should I worry? What could I do to fix the situation? I mean, since my PC seems to work fine, I'm not taking into consideration the drastic solutions of the time like reinstall Windows 8 or similar. I was wondering if there is a fast action, that I can do to solve this problem of ntoskrnl.exe.

  Thank you very much!

  FWIW...

  [Devices with questions]

  ID_periferica_PNP device Error_code

  Qualcomm-Atheros Bluetooth 4.0 + AR3012 HS-PID_3004\5 & 31B872B & USB\VID_0CF3 & 5 0 the device is disabled.

  PS/2 port ELAN Smart-Pad & 25EEF08 & ACPI\ETD010D\4 0, the device does not exist, is not working properly or the driver installation is not complete.

  You may want to investigate these extra features.

• NTVDM.exe. trouble message I said: "16-bit MS-DOS subsystem" then C:\Windows\sustem32\ntvdm.exe error while setting up environment for the application

  I can not also with ntvdm.exe. I'm no computer expert. The message said: "16-bit MS-DOS subsystem" (this on the header of the window). Then the message is C:\Windows\sustem32\ntvdm.exe error when defining the application environment.

  I already did a sfc/scannow and Windows Resource Protection did not find any breach of integrity.

  I'm trying to run an application on this website http://www.ray-ban.com/international/science/virtual-mirror.

  I'd appreciate any help.

  Best regards

  original title:ntvdm.exe. disorder

  Hello
  You are able to use your applications without problem?

  To check what is causing the problem, try the following steps:

  1:NTVDM method is bound to display drivers for nVidia.I suggest you to update display drivers on the manufacturer's Web site

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2: Clean boot

  Put the computer in a clean boot (namely if any third-party software hinders the process)
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Check with step 1 (run a clean boot):-If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.
  Continue with the remaining steps to pin-point on the third party service.

  Note: After you find the program causing the problem, you will have to perhaps to update or install a newer version of the program and also don't forget to put the computer to a normal startup.

  3:Disable method and then check the firewall/security software on the system tray.
  Note: Activate the security software after the test

• PC needs to be fixed: File:\windows\system32\winload.exe error code: Oxc000000I

  Upgrading to windows 7 8. PC worked fine for 3 months. The last time I turned on the computer would not start.

  After several attempts to "Prepare the automatic repair" screen appeared but never advanced.  The screen with the windows box 4 logo
  with circle of points running just above to prepare the automatic repair, waited for several hours but never changed.
  {1}-j' inserted my disk to repair Windows 8 {(set Bios pour démarrer sur le DVD).}  Note in this step, that I IS NOT select Boot from cd\dvd.
  That's when the error message appears: pc needs to be fixed: File:\windows\system32\winload.exe error code: Oxc000000I
  and you will need to use recovery tools.
  Three options are given: 1. Enter to try agai, 2; F8 for boot options, 2: F9 to use different operating system.
  Enter in any of the three choices just recycled the screen containing the same information.
  {2} - Windows 8 repair disk inserted. This time, I SELECTED Boot from DVD
  PC starts loading the cd [dvd, 4 windows box logo appears on the screen
  Bed cd\dvd for about 3-4 minutes.  Circle of rotation points appear on the screen below the logo box 4.
  at this point the drive HARD blinking led, system in this State remains. I never get to see service options. I waited for hours at a time.
  Produce the same results as step 2 above when I try to use the windows 8 installation disc.
  I'd appreciate any help as to how I can get to the repair, the troubleshhot or advanced options which are supposd to be available.

  Tony Hey,

  Regrettable that the problem exists.

  Seems like a problem in the BIOS settings, it would be good to check with the manufacturer of the PC.

  They might have more insight on this.

• BSoD, which is related to ntoskrnl.exe error

  Hello. I've known a few occasional BSODS, all associated with ntoskrnl.exe. Two of them were 0 x 124, while the most recent is a 0 x 101. I already ran Ccleaner in case it was a registry problem, but I doubt it. I also did a BIOS update for a couple of months. My specs are:

  Windows 7 x 64

  CPU: AMD FX-6300

  GPU: AMD Radeon HD 7750

  Motherboard: Asus M5A78L-M LX3

  Bluescreenview ran, so I'll post the reports here. Thanks for your help.

  ==================================================
  Dump file: 111614-47096 - 01.dmp
  Crash time: 15/11/2014 19:37:06
  Bug Check String:
  Bug check code: 0 x 00000101
  Parameter 1: 00000000'00000021
  Parameter 2: 00000000'00000000
  Parameter 3: fffff880'02f65180
  Parameter 4: 00000000'00000002
  Caused by the driver: ntoskrnl.exe
  Caused by the address: ntoskrnl.exe + 75bc0
  File description: NT kernel & system
  Product name: Microsoft® Windows® Operating System
  Company: Microsoft Corporation
  File version: 6.1.7601.18526 (win7sp1_gdr.140706 - 1506)
  CPU: x 64
  Plant address: ntoskrnl.exe + 75bc0
  Stack address 1:
  The stack address 2:
  Address 3 the battery:
  Computer name:
  Full path: C:\Windows\Minidump\111614-47096-01.dmp
  Number of processors: 6
  Main version: 15
  Minor Version: 7601
  Size of the dump file: 275 608
  Dump of file time: 16/11/2014-09:36:27
  ==================================================

  ==================================================
  Dump file: 111314-38657 - 01.dmp
  Crash time: 13/11/2014-18:35:27
  Bug Check String:
  Bug check code: 0 x 00000124
  Parameter 1: 00000000'00000000
  Parameter 2: fffffa80'07fa3038
  Parameter 3: 00000000'00000000
  Parameter 4: 00000000'00000000
  Caused by the driver: ntoskrnl.exe
  Caused by the address: ntoskrnl.exe + 4adb5c
  File description: NT kernel & system
  Product name: Microsoft® Windows® Operating System
  Company: Microsoft Corporation
  File version: 6.1.7601.18526 (win7sp1_gdr.140706 - 1506)
  CPU: x 64
  Plant address: ntoskrnl.exe + 4adb5c
  Stack address 1:
  The stack address 2:
  Address 3 the battery:
  Computer name:
  Full path: C:\Windows\Minidump\111314-38657-01.dmp
  Number of processors: 6
  Main version: 15
  Minor Version: 7601
  Size of the dump file: 262 144
  Dump of file time: 13/11/2014-18:35:49
  ==================================================

  ==================================================
  Dump file: 110514-33540 - 01.dmp
  Crash time: 11/05/2014-19:49:30
  Bug Check String:
  Bug check code: 0 x 00000124
  Parameter 1: 00000000'00000000
  Parameter 2: fffffa80'07f7e6c8
  Parameter 3: 00000000'00000000
  Parameter 4: 00000000'00000000
  Caused by the driver: ntoskrnl.exe
  Caused by the address: ntoskrnl.exe + 4adb5c
  File description: NT kernel & system
  Product name: Microsoft® Windows® Operating System
  Company: Microsoft Corporation
  File version: 6.1.7601.18526 (win7sp1_gdr.140706 - 1506)
  CPU: x 64
  Plant address: ntoskrnl.exe + 4adb5c
  Stack address 1:
  The stack address 2:
  Address 3 the battery:
  Computer name:
  Full path: C:\Windows\Minidump\110514-33540-01.dmp
  Number of processors: 6
  Main version: 15
  Minor Version: 7601
  Size of the dump file: 262 144
  Dump of file time: 11/05/2014-19:49:52
  ==================================================

  GT

  Both have been BCC124 two materials

  Stop 0 x 124 is a hardware error
  If you are overclocking try to reset your settings to standard processor and see if that helps.

  If you keep getting the BSOD here are things more than you may want.
  This is usually hardware related, defective heat, memory or processor even if it is "possible" he is associated (rare) driver.
  
  Stop 0 x 124 - what it means and what to try
  Synopsis:
  A "stop 0 x 124" is fundamentally different from many other types of bluescreens because it arises from a complaint of material.
  Stop 0 x 124 minidumps contain very little concrete information, and it is therefore necessary to address the problem as a case of material in an unknown state of distress.
  

  Generic troubleshooting ' Stop 0 x 124 ":

  1) to ensure that none of the hardware components are overclocked. Material which is pushed beyond its design specifications - by overclocking - may malfunction in unpredictable ways.
  (2) ensure that the machine is sufficiently cooled.
  If there is doubt, open the side of the case (be aware of all the relevant conditions guaranteed!) PC and direct an electric fan squarely to the motherboard. Who will rule on most cooling problems (lack of).
  3) update all drivers related to materials: video, sound, RAID (if applicable), NIC... anything that interacts with a piece of hardware.
  It is best to run the latest drivers anyway.
  (4) update the BIOS of your motherboard according to the manufacturer's instructions and clear CMOS.
  Their website should provide detailed instructions on the brand and model-specific procedure.
  (5) rarely, bugs in the operating system may cause "false positives" 0 x 124 events where the hardware wasn't complaining, but Windows thought otherwise (because of the bug).
  At the time of writing, Windows 7 does not have to suffer from a defect, but it is nevertheless important to keep Windows up-to-date.
  6) trying (stress) test these hardware components that can be put to the test artificially.
  The most obvious examples are the RAM and HDD (s).
  For the RAM, use the 3 rd-party memtest86 utility to run several hours a test value. (6-8 passes to stress the ram)
  For hard drives, verify if CHKDSK /R finds any problems on (s), including "bad sectors".
  Unreliable RAM, in particular, is mortal, as well as software, and anything other than a 100% clear memory test result is cause for concern. Unfortunately, even a 100% clear result the diagnostic utilities does not guarantee that the RAM is free of any defect - only that none have been encountered during the test passes.
  7) as the last of the non-invasive troubleshooting steps, perform a "Vanilla" Windows reinstallation: just the OS itself without additional applications, games, utilities, updates, new drivers - or ANYTHING that does not come from the Windows 7 disc.
  Who stops working mitigate the problem of the 0 x 124, jump to the next step.
  If you run the "Vanilla" installation long enough to convince yourself that not a single 0 x 124 accident occurred, start installing applications and updates slowly, always stopping between successive additions long enough to get an idea of the question if the machine is still free of 0 x 124 breaks down.
  Smash back, obviously the latest addition of software may be somehow connected to the root cause.
  If the stop error 0 x 124 persist despite the above steps, and the equipment is under warranty, consider to go back and ask for a replacement that does not suffer periodic MCE events.
  Be aware that want to perform the subsequent hardware troubleshooting steps can, in some cases, void your warranty:
  (8) clean and carefully remove the dust inside the machine.
  Reinstall all memory modules and connectors.
  Use a can of compressed air to clean the RAM DIMM supports as much as possible.
  (9) If all else fails, start removing items of hardware one by one in the hope that the culprit is something non-essential that can be eliminated.
  Obviously, this type of testing is much easier if you have access to equivalent components in order to perform swaps.

  If you are in the situation to have completed all the steps above without a resolution of the symptom, unfortunately the most likely reason is that the error message is literally correct - something is fundamentally wrong with the hardware of the machine.

  
  
  More advanced reading can be found here from a MS MVP IT PRO
  http://captaindbg.com/bug-check-0x124-whea_uncorrectable_error-how-to-troubleshoot/

• When turned on the computer he get an error message ' missing < root windows > \system32\ntoskrnl.exe.

  Hi, I replaced the motherboard in my computer, it seems to work very well, but when you turn on the computer I get an error message:

  \SYSTEM32\NTOSKRNL.exe is missing or damaged

  At this stage there is no cursor, or what I can do to get in my area on my drive, it's as if the computer shuts down and this message does not disappear.

  I am running Windows XP operating system.

  Is there a solution for this?

  Thank you

  Hello

  · What is the number and the model of the computer?

  · What is the service pack installed on the computer?

  Follow the steps in the link below and check if this can help: error message: "Windows did not start because of a configuration of the disk of the computer problem": http://support.microsoft.com/kb/314477

• Startup problem, get an error missing: < ROOT WINDOWS > \system\ntoskrnl.exe

  OP: Start-up of the question

  I starts instead of windows displays an error coming. It says I'm missing: \system\ntoskrnl.exe. How can I fix it?

  Hello Gwafer74,

  This problem can be caused if the Ntoskrnl.exe file is missing or damaged. You can follow the steps described in the article for this problem:

  http://support.Microsoft.com/kb/314477

  Follow the steps in method 1.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• XP Pro gives me error message < root windows > \system32\ntoskrnl.exe is damaged and must be replaced. How to replace or fix this problem?

  I tried to reinstall XP Pro, but then I get another error message the file for web printer windows cannot find so it won't let me not finished reinstalling XP.  How can I solve this problem or solve the problem with the ntoskrnl.exe that need to be replaced?

  Susan77,
  Try the items listed in this article: http://support.microsoft.com/kb/314477 
  It covers the error you see and can be useful. Typing of my new Windows 7 64 bit and love it! Soli Deo Gloria!

• "When restarting, get the error, Windows could not start because the following file is missing or corrupt: < root Windows > \system32\ntoskrnl.exe.

  Original title: black screen

  Attempt to restart the Gateway system running XP Pro.  The message "Windows has not start because the following file is missing or corrupt: \system32\ntoskrnl.exe" Please reinstall a copy of this file.  What do I do and where is this file?

  There is a good chance that the disk check running the Recovery Console will solve the problem.

  1. Insert the Windows XP CD in your CD-ROM drive and restart your computer. If you are prompted, select any options needed to start (boot) on the CD.
    
  2. when the text portion of Setup begins, follow the prompts. Select the repair or recovery option by pressing R.
    
  3. If you have a dual-boot or multiboot system, select the installation that you want to access from the Recovery Console.
    
  4. When you are prompted, type the administrator password. If you have not set a password for the account admin simply press on enter
    
  5. at the command prompt, type chkdsk/r > press ENTER. (Note: there is a space between the slash and the letter k).
    
  6. at the end of the output of scan type > press ENTER.
    
  7 restart your computer.

  If you do not have a Windows Xp disk, follow the instructions HERE to create a Windows Xp Recovery Console

• After sleep ntoskrnl.exe error 0x0000009f DRIVER_POWER_STATE_FAILURE

  DRIVER_POWER_STATE_FAILURE after sleep

  When I put my laptop to sleep by closing the lid or choosing sleep from the beginning, I get a bsod (ntoskrnl.exe 0x0000009f DRIVER_POWER_STATE_FAILURE) when the recovery.
  BlueScreenView report:http://dl.dropbox.com/u/12993257/bsod.htm
  Empty the file: http://dl.dropbox.com/u/12993257/091211-34538-01.zip
  Also, for some reason that I do not get the bsod when it puts itself in standby (IE after expire) but I understand when it hibernate itself.
  Any help is appreciated!
  Phil

  Hi chubble10,

  Method 1
  I suggest you try the steps from the following links:

  Stop error when you upgrade a computer that is running Windows 7 or Windows Server 2008 R2 standby or into hibernation, or when you restart the computer: "0x9F".
  http://support.Microsoft.com/kb/975599

  stop "0x0000009F" error message when a computer enters and fate of putting into hibernation in Windows 7 or Windows Server 2008 R2
  http://support.Microsoft.com/kb/981848

  Method 2
  This issue could be due to corruption of the graphics card driver. I suggest you to update the graphics card drivers.

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-in/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• Cannot start Windows Vista - ntoskrnl.exe is missing or damaged

  Hello, I am running Windows Vista. When I tried to start today I got an error message saying the ntoskrnl.exe is missing or damaged and should be replaced. How can I do that I can't use my netbook? Im not a geek, any advice would be apreciated, thanks

  Hello

  1. don't you make changes to the computer before the show?
  2. are you able to boot to the desktop?

  I suggest you try the steps from the following link:

  Windows cannot start with the error of the ntoskrnl.exe missing or damaged when the keys are pressed at the start
  http://support.Microsoft.com/kb/2022960

• Windows (Vista) can not start because the following file is missing or corrupt: < root windows > \system32\ntoskrnl.exe

  When I start windows, the message that I get a black screen is Windows (Vista) cannot start because the file is missing or corrupt: \system32\ntoskrnl.exe. Please reinstall a copy of the above file.

  I tried to launch a system of diagnosis without a disk and everything going on. I then tried running windows in safe mode and it won't allow me. That's when I switched to an installation disc supplied with the system. I tried to recover the system from there, but it would not go beyond the option of choosing an operating system. Once I got to that screen, there was NO operating system choose.

  I tried to restore my computer and there is no restore point.

  I renounced restore my computer and thought I'll all start over and install windows vista all over again. This was not the case either. I followed these steps:

  1. Turn on your computer and insert the CD or the DVD of Windows Vista.

  2. Install Windows page, follow all of the instructions that appear, and then clickInstall now.

  3. On the Get updated important for installation page, we recommend getting the latest updates to help ensure a successful installation and to help protect your computer against security threats. You will need an Internet connection to get the installation updates.

  4. On the Type your product key for activation page, we strongly recommend that you type your 25-character product key in order to avoid problems during activation.

  5. On the Please read the license terms page, if you agree to the terms of the license, clickI accepts the terms of the license.

  6. Follow the instructions on each page. On the type of installation do you want? page, clickCustom.

  7. On the place where you want to install Windows? page, select the partition where you want to install.

  8. Click next to begin the installation. You can see a compatibility report.

  and then had this error that says;

  windows doesn't have can create a partition on disk 0. The error occurred when preparing the partition selected for installation. Error code: 0x80004005.

  Now I am stuck and don't know what to do.

  Someone at - it solutions for me. Help, please.

  Hello

  1. on which the drive was initially installed OS?
  2. What partition you selected to install Windows?

  You can try to perform a startup repair by using the Vista installation disc.

  Check out these links for help:
  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions  

  How can I fix a startup (startup)?
  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-fix-a-boot-startup-problem 

  What to do if Windows does not start correctly:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly 

  What are the system recovery options in Windows Vista?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista 

  If nothing helps, so please get in touch with the system manufacturer for assistance because it may be a hardware problem.

  Kind regards
  Afzal Taher - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.