NB305 - failure recovery disk

Similar Questions

• NB305-01E recovery disks don't work

  I tried to restore my NB305 Netbook (windows 7) to its original factory (using the beginning and hold '0') and with the recovery disc I made when I bought my netbook.

  No recovery option works. Using the beginning + '0' does not put me in the hard drive recovery mode (everything that happens is that it freezes the boot process until I release the "0" key), or try using the recovery (F12 + recovery disk process) disk bothers me in the process of recovery, but after all of 1/2 hour of good process , the computer and external disk drive crashes with a message "copy files to the disc.

  I left the computer all night and there was no progress. It seems that the recovery disc I made is corrupt and I might have to buy a new Toshiba recovery disks. Any suggestions or information on how I can go about buying recovery disc Toshiba for my net book?

  Thank you! JL

  Hello

  To be honest I don t understand this with the computer and external drive. You have created recovery image on external HARD disk?

  Can you please tell me where you bought your netbook? This European model? I ask this because on the European models, you enter startup options using F8 at startup and fix my computer to start the installation of HARD drive recovery.

  In any case, if nothing is done I'm afraid, you must order the original Toshiba Recovery disk for your model laptop from Mr. I don t know where do you live and you can not send good link where you can order but you can contact the nearest Toshiba service provider and ask for help.

• Satellite L500 - failure recovery disk

  Dear Sir

  I have a Labtop * TOSHIBA L500 I3 *, April 2, 2010 one of the markets here in the FUJERAH.

  . After 11 days * I installed the uncompatable with Windows7 software * for blue pages whose content a massage WARNING says "your software has been damaged" have been seen then I decide to use the RECOVERY CD.

  I was foraced to use the * Recovery CD * finds with Labtop bag, but something problem based strage which is:
  The BONE was stuck in the last installation step exactly when _logging IN2, a massage of warning had appeared "Please don't not interrubt install windows and the connection... Please wait" massage disappeared and then system was put out of service and logging on again and so on... "» etc

  I created a nother restore CD that have 2 DVD and the problem was still the same.

  I used a copy of Windows7 rebot and install the windows7.

  * MY QUESTION IS :*
  WHY WASN'T THE RECOVERY DVDS? Despite I have create a RECOVERY DVD that have 2 DVD.
  I don't think there is a scratched in original recovery DVDs which sold with toshiba labtop! because the recovery DVDs I created Windows7 and the the same problem same labtop.
  Please help me

  Hello

  If you have successfully created the recovery disc ad if the procedure is successful then the installation of the recovery disk should work.

  I m not very well why you aren't able to recovery of the unit using the recovery disk, but you should check the BIOS.
  Access the BIOS by pressing F2 and you must set the default settings.
  Save the changes and try to reinstall the operating system using the disk recovery again.

  If this does not help then go to BIOS and select compatible SATA to AHCI mode and then try reinstalling the operating system.

• Failure of disk hard A10 and replacement - using recovery disks?

  I have a Satellite Pro A10, who suffered a hard disk failure. I replaced the hard drive (with a non-toshiba drive) but cannot load the OS etc. from the recovery disks provided with the computer when new. When you start the computer upwards with recovery No. 1 disc in the CD drive I get the message "system no valid disk, replace the disk and then press any key" any suggestion as to the repair would be welcome.

  Hello

  Well, it's not easy to say why it doesn t work. Have you tried to start the recovery with the second disc? Have you checked whether the CD 1 is a scratch?
  If it is not possible to recover the operating system with the supplied restore CD, I suggest to ask ASP for a new recovery CD.

  Good bye

• Re: Failure of Satellite M30 recovery disk write sector

  Hello

  While trying to reinstall XP through the recovery discs, I get this message:
  write the result of power failure = 1 disc = 128 sectors 14975-15039
  and I am unable to continue.

  I would clean the disc using Darik Boot and Nuke (DBAN), but cannot get this to start. The only software that has started successfully is Puppy Linux (which works on the RAM as a live CD), so it is really not installing on the HARD drive.

  Have you noticed that there is option 2 on the recovery disk: Expert Mode of recovery, but I don't know how to use it.

  Any ideas?

  Thank you

  When you use recovery media that you have two options, a standard and expert mode. When you use standard mode that OS will be installed on a partition and you can not set anything before development begins. The whole HARD disc will be deleted.

  Using the expert mode, you can create a clean partition and also to install OS on already persistent partition.

  To be honest expert mode will help you any. If the HARD drive is not defective installation in standard mode should work too.
  I'm afraid that the HARD drive is there problem.

• Blue Screen: Error Code C0000218(Registry File Failure) I have NO recovery disk, boot disk, etc. What can I do?

  I have a desktop HP that I installed a new hard drive on Windows XP Home Edition Service Pack 3. He has been working very well. But, the other day, I took out my DVD ROM and try it switched with different DVD - ROM, and when I restarted my computer, I got the "blue screen error Code: C0000218 (registry file failure)." The registry cannot load the HIVE (file). \System ROOT-SYSTEM 32-CONFIG-SOFTWARE or its log or alternate. It is damaged, missing, or not accessible in writing. "So, back to my main issue, I guess. How can I fiw it without any sort of disk recovery or boot disk etc... I know I could probably go buy some sort of recovery software, but can't afford it right now. Can someone help me, please?

  You have all the Norton/Symantec products installed and if so, do you know which ones and versions?

  You start with a chkdsk/r from the XP Recovery Console.

  Here's how:

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that may have come to a store to purchase the system.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• Failure of SMART hard disk - no recovery disk

  Hello. My laptop model Vaio VPCF126FM tells me that the hard drive has a failure (mini-message). In fact, the machine boots and I can connect to Windows, but once I try to do something with the fact that it freezes the HDD led on fixed. I have all my data backed up, but... I never created the recovery disks. I'm sure that this machine is out of warranty. So, what are my options? Buy a new HDD of, say, Amazon? And more important still, what OS? Thanks in advance for your help. Best regards.

  I had a similar problem with a SATA drive in my Vaio. It happened to be a Western Digital (WD) 500G drive. I was able to 'fix' with DLGDIAG WD's package with a full scan. You may be able to do the same thing. If the player starts to really not, he can fix that temporarily, or it may not work at all with the repair.

  You should always have the hard disk recovery partition, but I don't know how to use it if you replace the disk. You might be able to use an external enclosure for the drive sying and find a way to boot from the recovery partition to build on a new internal drive. Better would be to get your system of sufficient work to create recovery discs, which is what I was able to do. But for now, my reparied drive seems to work OK.

  Good luck!

• Windows update failures after using recovery disks (error A 8024, 000)

  original title: Windows update failures as a result of the use of recovery disk

  I used a recovery disc following a replacement of HDD on my Acer laptop and now windows update will not work.  I get an error A 8024, 000.  I tried the MS fix - it tool, but gives an error when it tries to install as well.

  Hello

  I suggest you to disable any program of security on your computer and check if it solves the problem.
  Disable the anti-virus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
  NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  It will be useful.

• System recovery - failure hard drive Pavillion a647c don't need no access to built-in recovery disk Info

  Pavilion a647c

  hard disk failed with integrated recovery which is most accessed information

  hard drive replacement, but need a recovery disk and I was not able to acquire one of HP they either refer me to a download menu that tells me as the news of recovery is on the hard drive of origin or when I try to buy a new sending me to the same set of menus for a download that returns me to the info on the original hard drive.  Frustrating to say the least.  I tried to send an email and call but that connected me menu to the menu and then he said that it was not able to complete the connection.

  How to acquire a recovery disk?

  Hello

  HP will not have recovery disc for machines built before 2006, but they are available from a reliable source here.

  Kind regards

  DP - K

• Pravilion dv7 series replaced after the recovery disk hard drive failure

  I tried to use the portion of my drive recovery hard when my laptop Pavilion dv7-4173 US could not operate.  After trying the hard drive recovery part several times I got an error message saying that the bootmgr is missing. I tried using the recovery discs I got to the store, I bought the computer before taking it home, and they failed. They worked up to 32% and then stopped.  I took the laptop and recovery (6 discs) disks to the tech Department of another retail store. After several days, I learned the recovery disc where no good/damaged. When I contacted the store bought told me that I had to bring in the laptop and recovery disks. They replaced the hard drive, saying: that was the problem, but do not partition. They decided to classified until the system OS of Windows 7 Home Premium 64-bit for Windows 7 Professional 64 bit., but did not try the recovery disks. Can I use the recovery disk, they made me, if are good restore the laptop back to factory new?  I know he will place the operating system Windows 7 Home back on the computer, but I want that all return provided with computer programs. I'll be able to upgrade the Professional operating system? I have the disc of Windows 7 Professional.  If my restore disk will not work, can I use the recovery disc, only 2 discs instead of 6, I can buy from HP and then move on to professional?

  Thank you.  Computer to factory fresh.  Just update software and then go to Windows 7 Professional

• Acer V5 - 571P, hard drive failure, have no recovery disk

  I have a laptop Acer V5 - 571P where the hard drive broke down. I intend to buy a new hard drive but I did not so much how to fix the system of Windows 8, which was preinstalled on the laptop recovery disks?

  Acer recovery media
  If you are in the United States, you can buy it:
  http://store.Acer.com/store/aceramer/en_US/eRecovery

  If you are outside the United States, you must call/email your regional Acer support service:
  http://www.Acer.com/worldwide/support/

• HP Pavilion p6 2000-ukm: recovery disk/boot on a new HARD drive?

  Hello

  I have a hp Pavilion p6 2000 ukm. Recently I started getting on my HARD drive error messages, saying it was a failure. I recently bought a new HDD in my pc. I connected it correctly and it says that I need recovery disk / boot disk.

  To my knowledge when I bought this pc there was no disk Windows 7. Now I know on workstations, you create your own.

  My question is... How to get windows 7 installed on my new hard drive when I plug it in? I'm looking for the iso of windows 7, I think that his name, but I can't find any .iso file.  I'm trying to install windows 7 on my new drive HARD I need not my other files like music... etc. I'm looking to get my HARD drive installed with windows 7, where it has IE and I can go back to the installation of everything I had previously. Should u use "create a system image"? Its a big file and requires 7 + dvd discs is my only option? I have my 25 key windows 7 as well.

  Any help is thank you attended.

  Hey,.

  Here's the phone number,

  02076600596

• Qosmio G10: Need a recovery disk

  My HDD main, implemented at the point of hardware failure and has just been repaired under warranty on my G10

  I need to restore the system and cannot locate my recovery disks.

  Someone at - it a copy, or can be downloaded?

  Hello

  You can order the recovery disk in the partner of service authorized in your country.
  It s not very expansive.

  The other possibility is to install the OS from the original CD of Microsoft.
  The necessary drivers, you will find on the page of the Toshiba driver.

  Good bye

• Satellite A80 135 impossible to reinstall the operating system using the recovery disk

  Hello

  Ive got a laptop 2005 Satellite a80-135 that worked very well until I tried to format the HDD after a performance of Ram boost operation (kingston 1 gb Ram module).

  Just after that, the computer started showing software problems and finally crashed;
  So I decided to reinstall the entire operating system yet. and here, I found the problem I really hope you can help me

  The thing is that I can't format my hard drive to my cd player (with recovery CD in) when the machine is restarted.
  In theory, start the Panel menu should appear after the computer reboot with the C key simountaneously key but nothing happens.

  Thanks in advance
  concerning
  jozze

  Hello

  Simply, the C button the STRANGE start.
  You can also try to press F12 after the laptop has been powered.
  Then the start menu should appear on the screen and then you could choose the ODD (optical disc) in order to boot from the CD.

  If this is not possible, the question is perhaps related to WEIRD malfunction or recovery disk.
  Maybe the CD/DVD drive cannot read the disc properly and so the laptop can not boot from the disc.
  You can try to copy the recovery CD using another computer and might try to start using the copied CD.
  If it does not the problem might be related to the WEIRD failure.

• Cannot start on Qosmio x 300 recovery disks

  Hello everyone
  I just got my Toshiba Qosmio x 300 - 13O return of repair today.
  It was a note that they had replaced the hard drive, so I have to reinstall everything.
  OK, no problem, I have some recovery disks to handle this.
  Problem is, when I start the computer, it says:

  Intel UNDI, PXE - 2.1 (build 082)
  Copyright (C) 1997-2000 Intel Corporation

  For Realtek RTL8100E/8101E Fast Ethernet Network Adapter v1.02 (060510)
  PXE - E61: Media test failure, check cable of
  PXE - MOF: Exit PXE ROM.

  It's pretty strange, I thought, so I checked if anyone else had a similar problem.
  One of the suggestions that I could find was to check the BIOS boot configuration, which I did with no effect.
  Another suggestion is to disable the LAN, which I also tried, but... after reboot, it says:
  Operating system not found.
  I also tried resetting the BIOS with no effect factory settings so my question is quite simple, what to do now?
  I will not open the computer because I'm worried about my warranty so any help is appreciated.

  Hello

  Have you ever used recovery disks in the past?

  At first you can not use some recovery disks but the disks with recovery designed for your model laptop image. I have a Qosmio x 300-14 x and I have 4 discs for her recovery DVDs (self created).
  This message occurs if the OS is not installed on HDD and recovery disc doesn t start.
  In the trunk, the order is listed LAN too and if the list of all bootable devices in front of LAN can not start then you will see this message and there is nothing unusual.

  So please use just original recovery discs.
  Start your laptop and press F12 repeatedly
  When you have the menu with all bootable devices, place the recovery disc 1 into the optical disc drive.
  With the up/down arrow buttons to choose the CD/DVD drive and press ENTER.

  Just follow the menu on the screen.