NDK1 > device - uninstallApp fails

Similar Questions

• Satellite Pro 490 CDT: THE BSOD VFAT DEVICE INITIALIZATION FAILED

  Hello...

  . Heres a beauty for you... I hope someone can help... here go us.

  Loan of laptop to grandson... came back... lots of files were missing.
  Managed to get the BIOS with ESC and F1... and got m/c start CD player. with W98 drive in

  ScanDisk fixed a lot, a lot of probs... then to start to reinstall W98.

  Stupid me thought that I wonder if he will now start without having to reinstall windows.

  Turned on / turned off... now I'm stuck.

  Immediately get the bluescreen...

  * VFAT DEVICE INITIALIZATION FAILED.*

  * A DEVICE OR RESOURCE REQD. BY VFAT IS NOT PRESENT OR IS NOT AVAILABLE. VFAT CANNOT CONTINUE TO LOADING.*

  * HALTED.* SYSTEM

  Computer portable primer not cd player where the BIOS has been the last value.
  Can I not access the Bios with ESC and F1 like last time.
  It doesn't matter what I do... I can't get this screen or boot in the bios.

  I hear the cd drive spin upward with the W98 CD in but still the same blue screen of death with the message above.
  If I can't go beyond that message or access the bios... what should I do please? /

  How can I get past this screen and reinstall windows

  I hope you can help...

  Thank you

  Hello

  The fact is that you have laptop for 10 years and I really wonder if anyone here has any experience with this good old classic.
  If you are unable to enter BIOS, the situation is quite serious. You may have Floppy drive for this laptop?

• JO 3830: Device Installation failed with 2081883393

  Hello

  I tried to install my printer but cannot go beyond the part of network installation.

  Printer is connected to a Wi - fi connection, PC sees the printer and found during the installation process.

  But there is this error code in the log file:

  "Device installation failed with-2081883393.

  How can I get my printer to install correctly?

  I can't even install it via USB and I tried all the steps in the Troubleshooting FAQ.

  I also tried all the steps of this thread:

  http://h30492.www3.HP.com/T5/Drucker-und-all-in-one-GER%C3%A4te-installation-und/HP-8620-Netzwerkins...

  Please help me I am desperate.

  Concerning

  PS Fax and scanning has been installed properly, then scanning works. Print to the printer also works. Only install under win7 print driver is buggy.

  Hi 8lives

  Thanks for the quick response and the link. Unfortunately, these measures have nothing to solve the problem.

  But I found the solution myself:

  the system variables %tmp% for the temp folder when incorrect. I removed a disk on which I had the temp folder, and Windows do not rewrite these variables.

  1 Control Panel > system > advanced system settings > advanced > Environment Variables > System Variables

  2. change E:\Temp in C:\Windows\Temp for 'Temp' and 'Tmp '.

  I hope that maybe I can help someone else with this solution.

  Kind regards.

• Registration of devices or fail to load profile registration

  OS X Server version 10.11.3; App version 5.0.15 Server

  Set up the server and the Profile Manager.

  We use a Windows Server 2008 R2 CA and CA root, server certificate and code-signing certificates are installed and configured in the server application.

  Devices to try to register through https://< myservername > / mydevices can install the profile of Trust successfully.

  However, if clicking on the registration button, they get a 500 Internal Server Error.

  If you try to install the profile of the inscription, it fails with the message: failed installation of profile.  Profile... could not be installed because of an unexpected error < InternalError:1 >

  Research for these mistakes find results mixed, a number of years, then it is clear that this has been a problem for quite a long time.  Most of the solutions is in the form, 'reinstall everything '.

  The only newspaper referencing these errors is the newspaper of the Device Manager Service profile.

  On a failure of the attempt, it is found:

  1: [27453] [03/03/2016 11:17:36.416] < 172.17.19.47 > time since the beginning of the script: 23339us [https://ac1.scdl.local/devicemanagement/mdm/mdm_enroll]

  1: [27453] [03/03/2016 11:17:36.416] < 172.17.19.47 > > > > POST processing mdm_enroll

  1: [27453] [03/03/2016 11:17:36.550] < 172.17.19.47 > OSX version 10.10.5

  1: [27453] [03/03/2016 11:17:36.736] \033[1;7;31mEXCEPTION:\033[0;31m error <-[SCEPHelper getSCEPChallengeForHost:]
  (/Library/Caches/com.apple.xbs/Sources/RemoteDeviceManagement/RemoteDeviceManage ment-889.8/Compiled/Framework-Base/Support/SCEPHelper.m:75): "" ((SCEPHELPER_GetSCEPChallenge (self.connection, hostname, hostnameCnt,
  (((& fault, & challengeCnt)))' error 1 ">

  USERINFO: {}

  NSLocalizedDescription = "Operation not permitted".

  } \033[0m\033[0m

  0: [27453] [03/03/2016 11:17:36.736] do_dmx_get_scep_challenge_for_host: [SCEPHelper an exception-]
  [getSCEPChallengeForHost:] (/Library/Caches/com.apple.xbs/Sources/RemoteDeviceManagement/RemoteDeviceManag ement-889.8/Compiled/Framework-Base/Support/SCEPHelper.m:75): "" ((SCEPHELPER_GetSCEPChallenge (self.connection, hostname, hostnameCnt,
  (((& fault, & challengeCnt)))' error 1 "

  0: [27453] [03/03/2016 11:17:36.736] < 172.17.19.47 > EXCEPTION: 500 Internal Server Error - failed to get challenge CEP. to

  #0 /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/php/ot a_service_common.php (47): DieInternalError ("couldn't re-sorting...")

  #1 /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/php/md m_enroll.php (78):
  GenerateMDMBindingProfile (8191, "07E047A2 - 1 CD 0-4...")

  #2 {hand}

  1: [27453] [03/03/2016 11:17:36.737] < 172.17.19.47 > < < < final output sent (26 bytes) - POST mdm_enroll

  0: [27453] [03/03/2016 11:17:36.737] < 172.17.19.47 > in 344ms | 500 internal Server Error [https://ac1.scdl.local/devicemanagement/mdm/mdm_enroll]

  Update on that.

  It was clear that there was a problem with the website for the Profile Manager, but I couldn't find the files in the hierarchy were the culprits.

  So, I decided to reinstall Server.app.  Followed by a tutorial online on the removal and reinstallation of the server.

  After you configure the server with just the Manager profile, and therefore Open Directory, a client might get a little farther in the registration process.

  When you click the button to register on the site of Mydevices, instead of the 500 internal server error page the customer to download the profile of remote management, but there is no need to install a message box indicating the host name does not correspond to the certificate.  Even with registration profile download/install.  Not InternalError:1, but the profile could not be installed for the same hostname mismatch.

  By checking this, I found that - when you change the hostname for the name myserver.mydomain.local, an alert was lifted on an incompatibility with the computer name (which is just MyServer) if solve you this error, the host name is changed to myserver.local and customers cannot load profiles.  If you do NOT resolve this error, customers can download and install MDM and registration profiles.

  I would note that other services that run to display messages saying the service is available at myserver.local - even if the host name is myserver.mydomain.local.  I suspect that these other services do not go to work for the same reason.

• HP 15-g030so: the selected boot device has failed. Press ENTER to continue

  So, I got a disc error and had to go on my hard drive. After that, I was invited by a certain recovery of hp and tool that fussed around a while and rung me that he could not repair the system and some newspapers were stored. After that I tried to install win 8.1 running from a usb storage device that was the 8.1 software the installer of windows in it. Then the screen went black and I was promtped with "selected boot device failed." Press Enter to continue. "

  Any ideas on how to solve this problem?

  Problemi1 wrote:
  And now we're back to the original problem. I have an official version of windows 8.1 downloaded and formatted to a 8 GB USB by the official program from the official websites of microsoft. And just to clarify, it works with my pc. Now, when I try to start the installation in HP computer, it promots me with "selected boot device failed." Press ENTER to continue"and im the possibility of"boot manager"," Manager "start of the EFI file', who faced the same problem when I try to manually start the device and start"(yep 2 times). "»

  Hello

  Sorry to hear that.

  If you see boot and boot to the EFI file manager but nothing else, the USB is not detected.

  Please, perform the above steps

  s ' ensure that the 8.1 Win USB is intact and working

  -Secure Boot to disable and enable the Legacy mode

  -save changes and continue with the F9 mode.

  

  If it still does not respond, please take screenshots and join them in the next post.

  I hope this helps.

• PXI: no device (MAX), fail to connect or deploy

  Hello

  I tried to use an SMU-8135 and MAX status is "connected - Running ', but once I try to connect or to deploy from the project it opens a box dialog saying"fail to connect to the target. Also, I don't see no modules currently in PXI on MAX under devices and Interfaces.

  Note: I use LabVIEW Professional 14.

  Thanks for the help!

  I just wanted to update this discussion because I finally solved my problem and it can help people in the future.

  Here's what I did to make it work:

  (1) traded on the SMU ethernet cables

  (2) checked with the cmd I could ping the target

  using MAX:

  (3) uninstalled all the software that was already on the SMU (because I had some questions of dependencies)

  (4) reinstalled the LabVIEW RT module on the system (ensuring that download the PXI components)

  (5) installed the necessary components on the SMU (check that the two LabVIEW RT on the target and the host have the same version)

  After all these, I added the target of a project and could connect without problem.

  I hope that helps!

• Ventrilo in world of warcraft runnig vista__Unable to enable DirectSound for some device.__DirectSoundCaptureCreate failed. HR = DSERR_NODRIVER. No sound driver is available for use

  My ventrilo was working fine two months ago, but now for some reason any gives me these errors, "unable to enable DirectSound for the selected device.
  DirectSoundCaptureCreate failed. HR = DSERR_NODRIVER. No sound driver is available for use. On my other computer samething but different error message that reads, "cannot open the input device. Another program, it may have already. RC = - 10"

  Event. worked fine on both computers. have updated and rolled back all the audio drivers, uninstalled event. and reinstalled. What continues?

  I have finnally got the answer that it must be run as administater. For the Horde!

• Clip - device MTP failed - Vista does not recognize Clip

  When I connect to the PC, the Clip says 'connected' but says Vista MTP device failed.

  I have Media Player 11.  I also have the old firmware Sansa 11.  I would update to firmware if I could get Vista to see the Clip.

  Any ideas?

  Yes, force MSC mode.

  Unplug the machine and turn it off.

  Together the lock light.

  Press in and hold the Center button and connect to your computer (hold the Center button until it connects).

  Now you can update the firmware.

• Installation of Streets & Trips get message requires the installation of Microsoft speech synthesis devices. Failed to install these features.

  When I try to install Windows Street & Trips 2009 on laptop, I get the message that requires installation of Microsoft speech synthesis devices. When I select OK, I get a message that one of the required components failed to install. The installation program will now stop. How can I install S & T?

  There is a separate forum that helps with streets and highway travel.
  Please repost your question in the forum below:
  http://social.Microsoft.com/forums/en-us/streetsandtrips/threads

  Thank you

• Install Windows Mobile Device Center fails on Win7 64 bit

  Hello world

  I'm trying to install/reinstall WMDC 64 bit on Win7 (64 bit). In the last step of the installation, it tries to add a new device. I can see in the Device Manager. But the installation of this device fails, and then the new device is removed. The WMDC is here, but it does not work and bluetooth devices do not offer the service "ActiveSync".

  Can anyone help here please?

  Thank you and best regards,

  Franz

  Hi Srimadhwa,

  Thanks again. It's corrected now. I think the problem was with the handheld device. He needed that he must accept the USB for ActiveSync connections. :-/

  So the major issue is fixed now, but I wouldn't mind not any progress with other minor issues.

  Thank you and best regards,

  Franz

• 3.1 AT100 not seen by Win7 as a network device, dlna fail

  My AT100 with v3.1 can use the Toshiba Media Player integrated to transmit certain types of video from my PC Win7 Home Edition, but the PC can't see the AT100 as a WiFi-connected device. As the AT100 is certified compatible DLNA (I know that "compliant" does not necessarily mean "fully compliant with all aspects") I expect to see the AT100 in view of features of Win7 as my Media Player for WDTVLive appears.

  I use a TV tuner card in the PC to record free to air programs for changing object that registers Win7 as .wtv file types. The AT100 nor the WDTVLive could play this type of file when pulling the stream from the PC. However, I can push the .wtv files using the WDTVLive watching "Play To" feature. I can't ' play to ' the AT100 because Win7 does not recognize the AT100 as a device connected.

  OMP Win7 there is a window that shows all the devices on the network and allows streaming of the permissions to be set individually for each device. I can find the AT100 in this list as an unidentified device by matching the MAC address reported.

  I plugged the AT100 by USB and charge Win7 a driver, it gave me the ability new use of WiFi on the AT100 to control the streaming of files from the PC to the WDTVLive. The PC, however continues to refuse to recognize the AT100 its device management windows.

  Whoever did this with different results?

  Bill

  Hello

  Can't say anything about the DLNA but AFAIK the Toshiba Media Player preinstalled on A100 supports different mod and one of the mods called DMP (digital media player).
  Choice of this mode allows to connect to the PC or laptop with preinstalled Windows Media Player 12. But this only works under Win 7! This will allow to distribute video files.

• Satellite L300: CDDCDW TSSTcorp TS-L633A device driver failed

  I am using a Satellite L300 laptop PC series with a TS-L633A TSSTcorp CDDCDW CD/DVD drive, however the player currently has stopped working, saying that:

  "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) »

  I tried to uninstall the drive and restart the computer, but when the laptop tries to reinstall the driver I got error message saying:

  "Software device driver has been properly installed.

  Any ideas for how to get the operational drive again?

  Hello

  I think that this can be resolved very easily.
  There are some discussions that offer a solution;

  Usually, you will need to remove the device in Device Manager.
  Then you must go to the registry and must remove the upper and lower registry key filters.
  Here you can get more details:
  http://support.Microsoft.com/kb/270008/en-us

  After that, restart the device.

• White screen then the message ' selected boot device has failed.

  After a normal shutdown last night, that my cell phone went straight to a white screen on back when I turned on.

  I tried to plug and unplug, take out the battery and connecting it to a TV with a HDMI which did not pick up anything.

  After turning off the power on and off several times, there is now a white dash in the upper left.

  I let him down for about 20 minutes before a message saying "the selected boot device is a, press ENTER to continue" that turns off the computer.

  I had the computer 4 days if shouldn't them be anything malfunction already.

  Any help would be appreciated!

  GabbyBlag

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your post on startup problems and wanted to help.

  You should not have problems with a PC this new.
  
  My suggestion is that you contact the HP customer support to see about maintenance and options at your disposal under warranty replacement.  If HP is unable to repair it, then you should be able to insist on a replacement - no charge!
  
  If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
  
  If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
  
  NOTE: once you get through, stay on the line until you are finally able to talk to someone ' one - it can take a while!
  
  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• Apple Mobile Device d\failed to start

  I had to untinstall and reinstall iTunes and now is coming up with the following error I have reinstall

  Service "Apple Mobile Device could not start. Make sure you have sufficient privileges to start system services.

  Any ideas how to solve this problem?

  Thank you

  Hello

  Uninstall/reinstall everything according to the instructions from Apple:

  «Remove and reinstall iTunes, QuickTime, and other software components for XP»

  http://support.Apple.com/kb/ht1925

  It is also the same list of what to remove what is in the link above from Apple:

  http://pcsupport.about.com/od/findbyerrormessage/a/MSVCR80-DLL-not-found-missing-error.htm

  Or try this program to remove it:

  http://www.revouninstaller.com/revo_uninstaller_free_download.html

  If the advice already given does not, please contact Apple for assistance.

  "Not to install iTunes or QuickTime for Windows"

  http://support.Apple.com/kb/HT1926

  "iTunes support-how to use iTunes.

  http://www.Apple.com/support/iTunes/

  "Contact iTunes Support.

  http://www.Apple.com/support/iTunes/contact/

  Or ask in the community Apple iTunes:

  https://discussions.Apple.com/community/iTunes

  See you soon.

• MTP USB device driver failed to install - Galaxy S4 and LG G3 phones.

  Original title: ver7 device driver instalation windows error when you try to connect smart phones mini Galaxy S4 and LG G3? Any help please

  I updated my system several times and its updates automatic out but I can't post of ASRock ion 330 in interface with my smart phones. My windiws has a rateing of 3.4 access experience.  For the mini Galaxy S4, I downloaded Kies\3 and original Kies both refuse to go beyond the connection at your stage deviece of the program before left im watching a dog spinning graphic and nothing happens and im left the peripheral USB MTP dryer failefk message to install.  I get the same message for my LG G3 too and ive no special software for this deviece istalled.  If someone has a way to work around this problem, I would be forever in dept here otherwise I will be cursed to tear my phone to transfer all the data on my hard drive laptop forever through a box of chip transfer of data via the USB port. Thank you.

  Hello Dean,

  I understand the inconvenience caused to you. I will certainly help you in this matter.

  As all devices have same also have USB device associated drivers. Appropriate sometimes drivers not detected after initial installation so reinstalling the drivers can fix the problems.

  Let me ask you;

  1. This already worked for you on this machine?
  2. You did any hardware/software changes to your computer before the show?

  Before you continue troubleshooting, please disconnect all external devices (printers, scanner, USB (Universal Serial Bus) drives, etc.) except the keyboard and mouse and then start.

  Follow the steps below and check.

  Method 1: Run the hardware and devices troubleshooter.

  The hardware and devices Troubleshooter is a tool that will check the hardware attached to the computer for all known with him of the issues and provides details and how to fix them. Follow these steps and run the troubleshooter.

  Open the hardware and devices Troubleshooter

  If the problem persists, follow method 2.

  Method 2: Uninstall and reinstall all USB controllers.

  To remove and reinstall all USB controllers, follow these steps:

  1. Click Start, click run, type sysdm.cpl in the Open box, and then click OK.
  2. Click the hardware tab.
  3. Click the Device Manager button.
  4. Expand Bus USB controllers.
  5. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
  6. Restart the computer and reinstall the USB controllers.
  7. Plug in the removable USB storage device and test to make sure that the problem is solved.

  Method 3:

  Check this resolution provided by stolagt on April 26, 2014.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/Samsung-Galaxy-S4-MTP-device-driver-wont-install/d2d011f8-d776-488e-B2F7-3eaf00c1031a

  Let us know if you need more assistance. We will be happy to help you.

  ____________________

  Thank you best regards &,.

  Isha Soni