Necessary network adapter
Hi I have a problem to find a network adapter after you install a new hard drive, I have a HP Pavilion g6-1166sa Notebook PC my drivers ID information are PCI\VEN_1814 & DEV_5390 & SUBSYS_1636103C & REV_00 PCI\VEN_1814 & DEV_5390 & SUBSYS_1636103C PCI\VEN_1814 & DEV_5390 & CC_028000 PCI\VEN_1814 & DEV_5390 & CC_0280 system of operating is Windows 7 64 bit
If someone out there could help me find a that would be great!
Thanks in advance
Hello:
You need this driver...
Tags: Notebooks
Similar Questions
-
HP Pavilion p6 - 2220t: Thunderbolt just zapped my hard wired network adapter
Product name: HP Pavilion p6 - 2220t Windows 7 64 bit
Product number: B3F79AV #ABA
Motherboard:
- Manufacturer: Foxconn
- Name manufacturer: H-Cupertino3-H61-uA TX
- Name of HP: Cupertino3
Integrated LAN:
- Technology: CG-RTL8171EH-gigabit Ethernet controller
- Data transfer speed: up to 10/100/1000 Mb / s
- Standards for the transmission: 1000-Base-T Ethernet
In my opinion, than a bolt of lightning just zapped my hard wired network adapter. Everything else is fine, including the wireless network adapter. But my computer doesn't even know he has a LAN adapter.
It does not appear in the network and sharing Center > change adapter settings. Only the connection wireless network card is listed.
It does not appear in Control Panel > Device Manager > network adapters. Yet once that the wireless adapter is listed.
My AT & T Modem is fine and the wireless router that I plugged it is fine. The lightning did not affect them.
The Web page of the modem displays my pc as part of home network devices but shows its status of 'off '. I think that if I click on scan for devices, it would pass in the list because there seems to be no current communication between the modem and the card ethernet at the moment.
I am however connected to the modem via my wireless router and from there, connection to internet is normal. So, I don't think it's a problem of modem. This same modem provides TV service and phone as well.
I think that for some reason any that the wired adapter got zap and disappeared. And since there is no way the computer to find it, I do not think I can load drivers or something like that. Since this is a 'built-in LAN' I think too which may mean it is part of the motherboard and I can't just insert another card. I don't know how in any case.
(1) it sounds like my adapter was killed? Or y at - it another way to diagnose his health when the computer doesn't even know it's there. (Usual tools find no problem because they only check the wireless connection, because any other adapters is located.)
(2) can I solve this problem by getting a USB Ethernet adapter, rather than take to the shop for repairs? Especially if I have to get a new motherboard. BTW, what does 'Integrated LAN' means?
(3) my USB ports are 2.0 so I know it is not necessary to get a faster USB Ethernet adapter. But is there anything else I need to know on which is compatible with this computer?
Thank you for your help.
@mpw101, welcome to the forum.
mpw101 wrote:
Product name: HP Pavilion p6 - 2220t Windows 7 64 bit
Product number: B3F79AV #ABA
Motherboard:
- Manufacturer: Foxconn
- Name manufacturer: H-Cupertino3-H61-uA TX
- Name of HP: Cupertino3
Integrated LAN:
- Technology: CG-RTL8171EH-gigabit Ethernet controller
- Data transfer speed: up to 10/100/1000 Mb / s
- Standards for the transmission: 1000-Base-T Ethernet
In my opinion, than a bolt of lightning just zapped my hard wired network adapter. Everything else is fine, including the wireless network adapter. But my computer doesn't even know he has a LAN adapter.
It does not appear in the network and sharing Center > change adapter settings. Only the connection wireless network card is listed.
It does not appear in Control Panel > Device Manager > network adapters. Yet once that the wireless adapter is listed.
My AT & T Modem is fine and the wireless router that I plugged it is fine. The lightning did not affect them.
The Web page of the modem displays my pc as part of home network devices but shows its status of 'off '. I think that if I click on scan for devices, it would pass in the list because there seems to be no current communication between the modem and the card ethernet at the moment.
I am however connected to the modem via my wireless router and from there, connection to internet is normal. So, I don't think it's a problem of modem. This same modem provides TV service and phone as well.
I think that for some reason any that the wired adapter got zap and disappeared. And since there is no way the computer to find it, I do not think I can load drivers or something like that. Since this is a 'built-in LAN' I think too which may mean it is part of the motherboard and I can't just insert another card. I don't know how in any case.
(1) it sounds like my adapter was killed? Or y at - it another way to diagnose his health when the computer doesn't even know it's there. (Usual tools find no problem because they only check the wireless connection, because any other adapters is located.) It doesn't sound like the adapter was fried. It's hard to explain when nothing else seems damaged. However, it can happen. I've seen some strange things happen to electricity.
(2) can I solve this problem by getting a USB Ethernet adapter, rather than take to the shop for repairs? Especially if I have to get a new motherboard. BTW, what does 'Integrated LAN' means? Yes. Here's a page on the Amazon site that lists several adapters. I used a USB adapter with my game Omen HP laptop and it worked fine. Integrated LAN means that the Local network adapter is a part of the motherboard and it cannot be replaced.
(3) my USB ports are 2.0 so I know it is not necessary to get a faster USB Ethernet adapter. But is there anything else I need to know on which is compatible with this computer? You are right. While USB 3.0 is backward compatible with USB 2.0. No, none of the adapter should work.
Thank you for your help. You are welcome! I'm happy to help you.
Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.
-
I bought aspire V3 - 574 G-54VY a month back. It runs on windpws 10 64-bit. There is a problem with the Qualcomm Atheros QCA61x4 Wireless Network Adapter. Whenever I update the driver to version 12.0.0.116 I face extremely slow internet. But when I go back to the previous version of the driver 4.0.0.115 i.e., the speed is correct. Can someone help me with this issue, because I'm not able to determine whether or not I have a defective laptop. The center of same service replaced the wifi card, but always the same question comes up. Thanks in advance.
Hi guys Finally I found the problem with the help of a technician
The problem was with power settings. When the laptop is plugged in, he took the full speed and slow battery mode. The solution is:
Goto settings-> system-> power and sleep-> additional power settings-> settings of plan (plan selected)
OR
Search for Goto-> type Control Panel-> hardware and sound-> Power Options->-> change the parameters of the plan (plan selected)
Then
change power settings advance-> adapter settings-> power saving mode-> Set battery maximum performance wireless
Check your speed now (if necessary reboot)
I am now using the updated driver 12.0.0.191 and internet high speed is correct.
-
Realtek rtl8188su wireless lan update 802.11n usb 2.0 network adapter
Realtek rtl8188su wireless lan update 802.11n usb 2.0 network adapter. What are the problems he says. is it necessary?
See my response to your previous thread: http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_update/latest-niviidia-driver-update-windows-7-64-geforce/2f0effbe-634b-e011-8dfc-68b599b31bf5
-
How can I set the preset wlan on ONE for an Atheros AR5007EG Wireless Network Adapter running on a Vista computer. Currently, the default is OFF and I need to use the Fn F1 to bring up the option to turn it on, Iwant my laptop to connect to my wireless router automatically without having to do that.
Thank you
Hi Cath.
In most cases, it is a configuration in the BIOS of the laptop that will solve the wireless by card.
Then start the laptop enter in BIOS and look for an entry that configure the wireless to be all the time card.
Where necessary the manual or computer support site must have the necessary info.
-
Wireless - Code 31 network adapter
Toshiba NB520 - [AR9002WB-1NG] that Wireless Driver has worked for 2 years! It stopped working all of a sudden [after a few windows updated or other?]! [Works well when you are using the Ethernet cable] I get the check "this device does not work properly because windows cannot load the drivers required for this device (the Code31] - I tried a search & reload.). Answer tells me "good driver is installed", but same error is always there [31 i.e.Code] how to find the right driver? or make this a function?
Hello Baron,
Thanks for the prompt response, I understand that it might be frustrating if experience you problems when you use the computer.
I would also like to inform you that you need to install the latest drivers and uninstall devices Device Manager network adapter wireless. I'm sorry for providing incorrect suggestions in the previous post. I made the necessary changes and would be asked to follow the steps to uninstall the device manager network device, then install the latest drivers wireless on the manufacturer's Web site.
Ideally, drivers for the device are developed by the manufacturer of the device and Microsoft works in cooperation with the manufacturer of the device to expand the area of driver updated, in some scenarios, may result in corrupt drivers confront these updates.
It is not required to uninstall the program from drivers in the list of programs, if you are not comfortable with the steps, I ask you to directly install the latest drivers for the card wireless from the link provided below.
http://www.MyToshiba.com.au/support/computers/NetBook/NB520/pll52a-02401m/download?OS=24
Note:
If you need assistance to download correct drivers, you might consider even to meet Toshiba Support.
Let us know the results, so that we can help you further.
-
The Qualcomm Atheros AR5BWB222 Wireless Network Adapter adapter has driver - or hardware problems
It's for my laptop Acer Aspire V3 - 771G who has internet CONNECTION problems. I was able to connect fine until windows 8, now I can only connect using the hard line. I ran a bunch of updates, driver downloads and etc means for this model directly on the Acer website for the upgrade of windows 7 to 8 and I had no chance. However, this message appears when I try to fix the problems of network adapter "the Qualcomm Atheros AR5BWB222 Wireless Network adapter adapt knows driver - or hardware-related problems". Any help would be greatly appreciated.
I FIXED IT ALL! :) Simply drag or type at the top right of your screen to open the SEARCH option. Research of Control Panel. Click MANAGE the DEVICES. Now, you can either search for the driver who is broken or defective write his name uninstall, and then reinstall it from the web (recommended to go to page creator ex; atheros was mine so I have downloaded from them.) If you have no W/LAN driver then go to your website of the laptop manufacturers and find the necessary driver for your model :) I HOPE THIS HAS HELPED!
-
Windows 8 problem with wireless network adapter
I had a lot of trouble to stay connected to the internet with my college wireless network on
my laptop Windows 8. Especially when my computer is endearing to load a large number of data, the connection becomes limited and stops working. I use the resolution of problems and there's always the wireless adapter, which always solve the problem. This problem will not occur on the unsecured network comments from school or home. I tried many solutions to solve the problem, as going to tab the wireless one adapter power management uncheck allow the computer to turn off this device to save power. nothing has worked so far. Here are the details of the detection of the troubleshooter from the last time that this problem occurred:
Details about network adapter diagnosis: Network adapter Wi-Fi driver information: Description . . . . . . . . . . : Dell Wireless 1704 802.11b/g/n (2.4GHz) Manufacturer . . . . . . . . . : Broadcom Provider . . . . . . . . . . . : Broadcom Version . . . . . . . . . . . : 6.30.59.74 Inf File Name . . . . . . . . . : C:\WINDOWS\INF\oem51.inf Inf File Date . . . . . . . . . : Monday, September 17, 2012 6:52:18 PM Section Name . . . . . . . . . : BCM1704HMD_NT62 Hardware ID . . . . . . . . . . : pci\ven_14e4&dev_4365&subsys_00161028 Instance Status Flags . . . . . : 0x180200a Device Manager Status Code . . : 0 IfType . . . . . . . . . . . . : 71 Physical Media Type . . . . . . : 9
Diagnostic information (wireless connectivity)Details about wireless connectivity diagnosis: Information for connection being diagnosed Interface GUID: 81887e6c-9ddc-413d-be6a-4465ad36cf87 Interface name: Dell Wireless 1704 802.11b/g/n (2.4GHz) Interface type: Native WiFi Connection incident diagnosed Auto Configuration ID: 1 Connection ID: 1 Connection status summary Connection started at: 2015-03-08 14:48:33-522 Profile match: Success Pre-Association: Success Association: Success Security and Authentication: Success List of visible access point(s): 7 item(s) total, 7 item(s) displayed BSSID BSS Type PHY Signal(dB) Chnl/freq SSID ------------------------------------------------------------------------- 28-8A-1C-FE-CA-80 Infra
-91 1 smcm-guest 28-8A-1C-FE-0D-80 Infra -50 1 smcm-guest 28-8A-1C-FE-0D-82 Infra -54 1 resnet 28-8A-1C-FE-B5-C0 Infra -48 6 smcm-guest 28-8A-1C-FE-B5-C2 Infra -47 6 resnet 28-8A-1C-FE-3F-40 Infra -91 6 smcm-guest 28-8A-1C-FE-3F-42 Infra -88 6 resnet Connection History Information for Auto Configuration ID 1 List of visible networks: 2 item(s) total, 2 item(s) displayed BSS Type PHY Security Signal(RSSI) Compatible SSID ------------------------------------------------------------------------------ Infra No 87 Yes smcm-guest Infra Yes 87 Yes resnet List of preferred networks: 5 item(s) Profile: mobilenet SSID: mobilenet SSID length: 9 Connection mode: Infra Security: No Set by group policy: No Connect even if network is not broadcasting: No Connectable: No Reason: 0x00028003 Profile: NETGEAR30 SSID: NETGEAR30 SSID length: 9 Connection mode: Infra Security: Yes Set by group policy: No Connect even if network is not broadcasting: No Connectable: No Reason: 0x00028003 Profile: Yeager Network SSID: Yeager Network SSID length: 14 Connection mode: Infra Security: Yes Set by group policy: No Connect even if network is not broadcasting: No Connectable: No Reason: 0x00028003 Profile: resnet SSID: resnet SSID length: 6 Connection mode: Infra Security: Yes Set by group policy: No Connect even if network is not broadcasting: No Connectable: Yes Profile: smcm-guest SSID: smcm-guest SSID length: 10 Connection mode: Infra Security: No Set by group policy: No Connect even if network is not broadcasting: No Connectable: No Reason: 0x00028001 Information for Connection ID 1 Connection started at: 2015-03-08 14:48:33-522 Auto Configuration ID: 1 Profile: resnet SSID: resnet SSID length: 6 Connection mode: Infra Security: Yes Pre-Association and Association Connectivity settings provided by hardware manufacturer (IHV): No Security settings provided by hardware manufacturer (IHV): No Profile matches network requirements: Success Pre-association status: Success Association status: Success Last AP: 28-8a-1c-fe-b5-c2 Security and Authentication Configured security type: WPA2-802.1X Configured encryption type: CCMP(AES) 802.1X protocol: Yes Authentication mode: User only EAP type: Authentication not started Number of 802.1X restarts: 0 Number of 802.1X failures: 0 802.1X status: Success Key exchange initiated: Yes Unicast key received: Yes Multicast key received: Yes Number of security packets received: 13 Number of security packets sent: 13 Security attempt status: Success Connectivity Packet statistics Ndis Rx: 400791 Ndis Tx: 204956 Unicast decrypt success: 0 Multicast decrypt success: 0 Unicast decrypt failure: 0 Multicast decrypt failure: 0 Rx success: 1632 Rx failure: 846 Tx success: 240 Tx failure: 0 Tx retry: 24 Tx multiple retry: 12 Tx max lifetime exceeded: 0 Tx ACK failure: 60 Roaming history: 0 item(s) Diagnostic information (wireless connectivity)Details about wireless connectivity diagnosis: For complete information about this session see the wireless connectivity information event. Helper Class: Auto Configuration Initialize status: Success Information for connection being diagnosed Interface GUID: 81887e6c-9ddc-413d-be6a-4465ad36cf87 Interface name: Dell Wireless 1704 802.11b/g/n (2.4GHz) Interface type: Native WiFi Result of diagnosis: There may be problem
Diagnostic information (wireless network adapter)Details about wireless network adapter diagnosis: For complete information about this session see the wireless connectivity information event. Helper Class: Native WiFi MSM Initialize status: Success Information for connection being diagnosed Interface GUID: 81887e6c-9ddc-413d-be6a-4465ad36cf87 Interface name: Dell Wireless 1704 802.11b/g/n (2.4GHz) Interface type: Native WiFi Profile: resnet SSID: resnet SSID length: 6 Connection mode: Infra Security: Yes Connect even if network is not broadcasting: Yes Result of diagnosis: There may be problem
Thanks for any help! It happened for about eight months and it's really frustrating.
Hello
Check with Dell and Broadcom, their documentation diagnostics online and drivers.
and ask questions in the forums about known problems. The two Dell driver update, then
Broadcom if there is more recent.Dell support
http://support.Dell.com/Dell support drivers - product manual & warranty Info (left side) - and much more
http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHSDell forums
http://en.community.Dell.com/forums/Dell PC Diagnostics
http://www.Dell.com/support/Diagnostics/us/en/19/
Broadcom - downloads and Customer Support
http://www.Broadcom.com/support/==============================
More troubleshooting:
It is possible that the drivers you use, even if later now available, are not
100% Windows compatible 8.1. Check with the manufacturer of your system (motherboard support
Manufacturer of custom systems) and/or the manufacturer of the device. This one, like Intel,
RealTek, Atheros and others may have newer versions is not available to the mother of system
-site of the manufacturer on board. And continue to check in with them regularly over the next year.
Also update the BIOS, drivers from the chipset of low level and major embedded and separate
device drivers.Download your applications and devices in Windows 8.1
http://Windows.Microsoft.com/en-in/Windows-8/get-apps-devices-working=========================================================
Don't forget to check the updates of the firmware on the router, because who can have a definite effect
on connections Windows 8.1 same if other OS systems connections are fine.Check with support of the manufacturer of the system (motherboard for customized systems manufacturer) and/or
the manufacturer of real device driver updates. If there is no newer versions re - install the same
ones. Ask known in their forums (if any) problems.===================================
General resolution: (after the above if necessary)
Free Wi - Fi and wireless problems
http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1Note the use of Win Key + X and Win Key + W (to access control panel, run,
and settings according to needs). Win + D key calls to the office and use
Win Key activates / deactivates the desktop and start screen.--------------------------------------------------------------
Control Panel - Network and sharing Center - solve problems
References to Vista also apply to Windows 7 and Windows 8.
Your router be guess here, you have successfully updated the firmware a possible
solution? And I would update your WiFi drivers on computers. How far away are they
you have set in the router? Are there obstacles in the path?Actually try updating your driver and disabling the network logon.
Control Panel - network - write down of the brand and the model of the Wifi - double click
top - tab of the driver - write version - click on update driver (can't do
nothing that MS is far behind the certification of drivers). Then right click on the Wifi
Device and UNINSTALL - Reboot - it will refresh the driver stack.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmDownload - SAVE - go where you put it - right click – RUN AS ADMIN.
You can download several at once however restart after the installation of each of them.
After watching the system Maker you can see the same device manufacturer
more recent versions. (Those become your fonts of rescue system manufacturer).Repeat for network (NIC) card and is a good time to get the other update
Drivers Windows 8 like updated drivers.The adapter in Microsoft Windows 8/8.1 network problems - how to fix? (Do not forget to see
This section-> update the NIC driver).
http://Windows.Microsoft.com/en-us/Windows-8/fix-network-adapter-problemsDrivers and Microsoft - Windows 8/8.1 - material
http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8Microsoft Windows 8/8.1 - Why Windows is not find my device?
http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-deviceMicrosoft Windows 8/8.1 - what happens if a device is not installed correctly
http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly
------------------------------------------------------Make sure you know the details of connection to your wireless router - SSID and password.
You lose connection when you do and have to redo your logon.
Control Panel - Network & Sharing Center - set up a new connection or network
-----------------------------------------------------
And:
TechingItEasy - how to join a Wi - Fi network in Windows 8 by MVP Andre Da Costa
http://techingiteasy.WordPress.com/2012/06/09/how-to-join-a-Wi-Fi-network-in-Windows-8/Microsoft - Windows 8/8.1 - Web & Networking
http://Windows.Microsoft.com/en-us/Windows/Web-networking-help#V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1&Web-networking-help=Windows-8Microsoft - Windows 8/8.1 - Wi - Fi & Networking
http://Windows.Microsoft.com/en-us/Windows-8/WiFi-networking#1TC=T1-----------------------------------------------------
Microsoft - Windows 7 - Why is my Internet connection so slow? (applies to Windows 8)
http://Windows.Microsoft.com/en-us/Windows7/why-is-my-Internet-connection-so-slowMicrosoft - Windows 8/8.1 - wired and wireless in Windows problems
http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Hello
I am not able to connect to the Oracle SQL developer database. I said / 0 error: the network adapter could not establish the connection.
I started the listener, but what I see is, it points to a different IP address instead of the IP address of the host. How to change the name of host or IP address.
I see that it points to the host name in listener.ora.
Attached the screenshot
Can someone help me solve this problem?
Thanks in advance
What he says is the listener.ora file is not necessary to start the listener. If you rename, then start the receiver, then start the db, after a minute or two, the db should automatically register with the listener and then you can make a tnsping or otherwise connect to the database through the listener.
I'm not entirely sure what's going on with your image, but I can't help but wonder if somehow something is not what you expect with the investigation period, whenever it starts.
So use lsnrctl status lsnrctl services to see what the listener is the situation and tnsping and ping from the client to see what he thinks.
-
I know it's something of an FAQ, but several hours spent on these forums and Google search gave me nothing of what works.
All the solutions I've seen assume Windows as host and (something) as a guest.
In my case, the host is Linux (CentOS 6.4) and invited is Windows XP.
The host has two network cards, one on a 10.x.x.x network and the other on 192.168.x.x network. In the guest virtual network adapter connects to the network 10.x.x.x. I want it on 192.168.x.x network.
I would be happy if I added another virtual network card and one of them connected to each network, but two of them connect to the 10.x.x.x network (with 10.x.x.x different IP numbers).
The solutions I've seen indicate that under the Virtual Machine-> network adapter settings-> network connection, you click on the button "Configure the adapter" and load of come from there. It would be great, but I have no button "Configure the adapter" or something like that. I have a button "Advanced", but that just allows me traffic into and out of the butterfly and set a new MAC address, that's all.
Because the host is Linux, I have also no equivalent to vmnetcfg.exe, at least none that I can find.
So, where should I go from here?
VMware Player is the version 6.0.0 (freshly upgraded 5.0.2 this afternoon). I tried with version 5.0.2 and got the same thing.
Thank you...
Eric / www.rkt-tech.com
You will need to use the virtual network Editor, although first you may need to create symbolic links.
The first symbolic link already exist in a Terminal using the following command. Note: If connected a root the sudo command is not necessary when the. Tip: Copy and paste the commands!
ls-l/usr/lib/vmware/bin/vmware-netcfg
If it exists, the output should be similar to the following.
lrwxrwxrwx 1 root root 13 29 Sep 08:17 / usr/lib/vmware/bin/vmware - netcfg->/usr/lib/vmware/bin/appLoader
At this point, you can simply use the following command to bring the virtual network Editor.
sudo/usr/lib/vmware/bin/vmware-netcfg
However, if you want easier access creates a symbolic link in: / usr/bin
sudo ln-s/usr/lib/vmware/bin/vmware-netcfg/usr/bin/vmware-netcfg
If the symbolic link/usr/bin/vmware-netcfg does not exist, then use the following command.
sudo ln-s/usr/lib/vmware/bin/appLoader/usr/lib/vmware/bin/vmware-netcfg
Then, to facilitate access to create a symbolic link in: / usr/bin
sudo ln-s/usr/lib/vmware/bin/vmware-netcfg/usr/bin/vmware-netcfg
To bring up the virtual network in a Terminal editor use the following command.
sudo vmware-netcfg
In the virtual network editor disable automatic bypass on vmnet0 by selecting the network map target in the bridge to: list box.
-
Windows Vista network adapter problem
Machine 1:
VMWare Workstation 6.0.2 build 59824Host OS: Windows 2003 server Enterprise edition 5.2.3790 service pack 2 32-bit
Machine 2
VMWare Workstation 6.0.3 build 80004
host operating system: Windows 2003 server Enterprise edition 5.2.3790 service pack 2 32-bit
I created a virtual machine in Vista Business on the Machine 1. After creating and testing the image, it is copied on Machine 2 for use by another group. When the image of Vista is started on the 2 Machine, the windows inside the image network adapter is disappearing and Vista requires the user to configure "Network 2". Copy the image to the Machine 1 does not cause a new adapter to create, instead, the Image is turned down for the originial Windwos «Network» network adapter
The only difference in hardware between the above two machines has an Intel 2 GHz Xeon model 5130 (Machine 2) and the other has an Intel Xeon 2.33 GHz model 5140 (Machine 1). I can provide more information, if necessary, as I'm not even sure what type of information can be useful to all. Thank you.
Brian block
EMC
Hi Brian,.
Clone the VM from Vista and then copy content cloned in VMware workstation 6.0.3
I tested and it works
If you found this information useful, please consider awarding points to 'Correct' or 'useful '. Thank you!!!
Prakash
-
Several subnets on a NETWORK adapter with BladeCenter?
We have an IBM BladeCenter H chassis with switches Cisco 3012. Each blade server is configured with a total of 4-port NETWORK adapter. Our initial intention was to 2 4 network cards for the traffic of the virtual machine and the others, two for tolerance to the failures/vmotion/management team. It has recently been brought to my attention that there is another necessary subnet for some of the virtual machines that will run on these servers. So, my question is, can I have access to multiple networks (10.1.1.x & 192.168.0.x) through two NICs servile mentioned above to the traffic of VMware? Keep in mind it's bladecenter environment, I have the external ports on the back of the chassis of the physical connectivity. All documentation showing this would be the icing on the cake. Thanks in advance.
You should be able to this with trunking and tagging of vlan. This will allow you to pass the traffic of multiple VLANs and label it.
Jason Silva
-
Check Point virtual network adapter for SSL Network Extender
I just downloaded an update recommended for Windows 10. After updating downlaoded, whenever I start my computer it say compatibility assistant this app is not working properly try to reinstall Check Point virtual network adapter for SSL Network Extender. Why do I get this notice? I have no problem getting on the internet. I have a modem and a router that work well with all my devices. I use an ethernet cable, nothing has changed in addition to the recommended update.
I thought I would try devices and adapters Manager double click Network and looked for updates. Updated and now I don't get notification any longer.
-
HP Compaq 6200 Pro small format: Re-install the network adapter
Dear assistants & members,
Yesterday, I tried to download a 64-bit system that has not worked and had trouble.
I am trying to connect to the internet, but it still says: a network adapter was not found (something like that)
I have seen a lot of messages so I already do my hardware ID:
PCI\VEN_8086 & DEV_1502 & SUBSYS_1497103C & REV_04
PCI\VEN_8086 & DEV_1502 & SUBSYS_1497103C
PCI\VEN_8086 & DEV_1502 & CC_020000
PCI\VEN_8086 & DEV_1502 & CC_0200
I hope you self-introduction can help out me.
I'm computer: HP Compaq 6200 Pro Small Form Factor
Hello:
Try the driver directly from Intel. The hardware ID you posted is for an Intel ethernet card.
The first file listed is for W7 32 bit.
https://Downloadcenter.Intel.com/download/18713/network-adapter-driver-for-Windows-7-
I was going to ask...
How did you couldn't get W7 x 64 install?
I have an Elite 8200, which is the same model as yours, except that it's a chipset series 6 Intel a little better than you do.
I had no problem installing W7 x 64 on it.
-
HP Pavilion Slimline s5510y of: No. Wireless Network Adapter installed
I just bought a Pavilion Slimline S5510Y Desktop opportunity; not an installed wireless network adapter. Y at - it somewhere that I can download the map?
Here is the PAGE of SUPPORT for this office. It doesn't have a wireless adapter. It has a wired aka the installed ethernet card. The wireless adapter is a piece of hardware and must be purchased, not downloaded. There are choices in the type would work better for you - USB or PCI x 1. It may depend on the type of network you want to use. The new highspeed options may require an adapter corresponding to the specification of network router in order to achieve faster speeds of the AC. If you look at the "n" speeds then most can do. Also be aware of the bands 2.4 and 5 GHz for newer routers. If all this sounds "Greek", then perhaps seek help from a friend.
Maybe you are looking for
-
Need drivers for Satellite P100-240
HI I have a Satellite P100-240. I'm looking for drivers for this machine running MCE.In support, I can only find drivers for p100-PSPA0E / p100-PSPA3E / p100-PSPA6Eare these the same drivers for my p100-240.Also made even the drivers for Vista on thi
-
Comenting code - style - how to keep coments anywhere - without the help of sequences
Silly question perhaps on the style of comment. Basically, I want to use the sequence boxes to keep the comments on my diagram opposite the bits of code that they referred to-otherwise, when you use cleaning diagram (which I'm afraid that I use all t
-
Hello I develop an application that communicates with a microcontroller. I would like to use the API to frame for a setup where I can send commands and get the answers and want to use the API channel for a mode where I'm simply followed the messages
-
I have a hp type copier printer scanner hp 1355. I need a driver (software) for this. If the HP all-in-one device is not suitable for use on WINDOWS XP, is it possible to use hp 1355 in the WINDOWS XP operating system? Thanks FOR YOUR HELP.
-
Error code 646 when installing Windows updates
Original title : Need help I tried to make my windows update, but when he started the update, he said there is an error: code 646. What should I do?