Need card mother manufacturer of VPCEG2DFX service tag # C90289A1 moderator please.

Similar Questions

• M91 need card mother specifications

  I looked and looked, even called the technical support from Lenovo, and nobody seems to be no sheets on the motherboard M91. The motherboard was MADE by Lenovo! How is it that they have ZERO info on their OWN products? This my Lenovo, he meets! You sorely test my faith on your behalf!

  Interesting. Such things began to happen after Lenovo took over. Yes, much of the information on their Web site is incorrect, but there are solutions. B3U type is identical to your machine with the exception of an additional hard drive, you can use this type of model to download your drivers. Go HERE and download the PSRef of current Thinkcentre desktops, your model is listed on page 91. Seems to be your particular model has slipped through the cracks at Lenovo.

  What features are you looking for? OEMs are cunning on release too much information on their products. PS/Ref is all there is, other than the specifications detailed online which is pretty much the same information in a different format. I also watch the .txt file BIOs of clues about the updates on the latest processors or memory, but your machine is so new he probably don't have not been updated like that, so far.

• Upgrade of Ram card mother 8700 XPS

  I bought the regular version of the 8700 XPS that came with 8 GB of ram not the 8700 XPS Special Edition.

  I got contradictory information service to Dell customers on the amount of ram, the card mother the regular XPS 8700 supports. When I bought, but have read on the forum that it is only 16 GB, I said 32 GB of Dell.

  Can someone confirm please the amount of ram, the card mother the regular XPS 8700 can handle? Please, I beg you.

  Hi chrisyackulic,

  Dell XPS 8700 has 4 x 240 pin slots DDR3L/DDR3 SDRAM supporting the Dual Channel DDR3L SDRAM up to 1600 MHz. The XPS 8700 supports a maximum of 32 GB of system memory. If you install DDR3L, all other modules should be DDR3L (1.5 V) only.

• 8200 elite format microtour, need of care technique for card mother/PSU

  Hello.

  I'm upgrading of the power supply in my Hp Compaq 8200 Elite format microtour.

  The /PSU motherboard uses an archaic connector that looks like a connector 6-pin inline with to the (http://i20.photobucket.com/albums/b225/r4ch3t/Aux-connector-148x200.gif). But it is connected with 4 wires (red/white, white, green, purple)

  To upgrade the PSU, I need to find a way to connect it to the new motherboard, but I can't find any information or datasheet for the motherboard or the power supply.

  Motherboard:

  SP #611834-001

  DG #611794-000

  PSEYU0JCY0W197

  AS #611793-003

  0J REV

  POWER SUPPLY:

  Model: PC9057

  PART NUMBER: 611483-001

  ALTERNATIVE NUMBER: 613764-001

  Where can I find more information about the card mother/PSU?

  What is the connector? It is standardized in some way?

  What is the combo of tensions/soil necessary for the pins?

  Thank you

  Your question would be better served in theHP Enterprise business community.  I highly recommend that you join the community and post your question there.

  This time, do not forget and give identifying information more accurate than you did in this post. In the image below, you will see how what gave you as a product identifier can be confusing.

  

• Need drivers chipset card mother AmethystM (MSI-7184), for Vista 64 bit OS

  I'm looking for the proper chipset drivers, or compatible drivers, for the card mother MSI-7184. The chipset is ATI RS482 & ATI SB400. Specifically, I'm looking for the following drivers:

  PCI express filter driver - currently using Catalyst 8.3 ATI PCI Express (3GIO) Filter Driver

  Configuration AMD address map - currently using the standard driver microsoft

  HyperTransport (MC) Configuration of the Trace Mode - currently using the standard driver from microsoft and DRAM AMD

  AMD HyperTransport Configuration - currently using the standard driver microsoft

  Configuration of various AMD - currently using the standard driver microsoft

  ATI i/o Communications Processor LPC Controller - currently using the standard driver microsoft

  ATI i/o Communications Processor PCI Bus Controller - currently using the standard driver microsoft

  Communications ATI i/o Processor USB 1.1 OHCI controller - currently using the standard driver microsoft

  Communications ATI i/o Processor USB 1.1 OHCI controller - currently using the standard driver microsoft

  Controller ATI i/o Communications Processor USB 2.0 EHCI - currently using the standard driver microsoft

  Controller IDE ATA standard - currently using microsoft standard driver - it's supposed to be SATA I think that my HD is connected to it and its SATA

  Standard ATA IDE Controller - currently using the standard driver microsoft

  Bridge standard CPU PCI - currently using the standard microsoft driver - what is supposed to be ISA instead of the processor?

  PCI and standard PCI to PCI Bridge - currently using the standard driver microsoft

  I'm looking for drivers because my CPU usage is constantly at 45-60% usage. My processor is an AMD Athlon 64 X 2 4200 +. Devices and drivers of Thease are what Vista has recognized and loaded. I don't think that is correct. Any help on this would be greatly appreciated.

  Sean

  OK, I found the appropriate drivers!

  ATI drivers:

  Drivers of North Bridge: catalyst 8-12_vista32-64_sb_72277

  SMBus, & IDE drivers: catalyst 8-12_vista32-64_72274 - run the program so it extracted all files in c:/ATI do get out. Then manually install two IDE controllers and SMBus drivers by using Device Manager.

  Also, I solved the problem with the hardware interupts. The on-board USB controller and suport Legacy interfere with the video card. To fix this go into the BIOS and under Advanced, disable Legacy support. Then in Device Manager disable all three usb controllers. These controllers have been disabled as soon as the missing of interruptions. I'll get a PCI usb so I can still have USB ports.

  Message edited by shfire2000 on 01/26/2009 21:51

• Reference Dell 15R SE 7520 my downloads Dell said "SERVICE TAG NOT SUPPORTED" need > > > Cyberlink PowerDVD - download Blueray

  I buy dells all the time... and I never had a problem with the addition of a new system for my dell downloads... I even managed to do it with the old system > talk about saving lives, buying used - to find have never used this program... But I have a new Dell Inspiron 15R SE 7520 with a Blueray player. For any types of bluerays play, you must have a program for the codec... My laptop came with Cyberlink PowerDVD, but a hard drive replaced, and I lost the program. My laptop is under warranty... I have the dell USB Pen... I have the Dell Windows 7 disc... I don't have the disc from dell or of the programs and drivers support... "someone said on another post, all on the PEN USB - but I can't understand the use of this on my PC - I tried to boot from it, and she gets all the way to locate road and stop? When I plug in windows 7 - I do not see any program CyberLink... But, for some reason, when I got my new drive, I couldn't figure out how to get the USB pen to work... so I had to use the Dell DVD - The DVD has only the operating system... Went to my Dell downloads and click on my system registry... and I got "SERVICE TAG NOT SUPPORTED" someone KNOWS WHY? Should I call dell and ask them to send me the media? As he sits down, he already bytes > is not able to use the HD 7730 M for video and or continuous... Thanks for reading and I appreciate any help!

  Please someone with the help on this?

• Insect caught in the monitor u2414Hb and support is a disaster. No service tag

  First of all the question I seek to solve. A small insect, probably a fly has managed to make its way into my monitor in any way. It became lodged between the Panel and an outer layer or in the Panel and quickly dies. And has been stuck in place for more than a month. Attempts to dislodge without disassembling the monitor failed.

  Now, AFAIK disassemble the monitor to clear it will void the warranty and risk of damage to the screen so I prefer to avoid. I decided to contact the Department of support or guarantee dell to see if we could do something on this end.

  The monitor was purchased new from NewEgg.com on 01/01/15, with an indicated 3 years manufacturer's warranty. So, it should always be in the manufacturers warranty period.

  Although none where Dells website, or via their telephone system you can contact the technical support or departments without a number of warranty service. My monitor does not have a serial number, and Dells own materials state clearly that stand-alone monitors sold prior to 2016 (like this one, in 2015, has bought manufactured 2014) do not always have a service key.

  I tried every number on my monitor and its box, both online and telephone assistance. A number search as a service on the Web site key (but not with the telephone assistance) and appears as a system of office since 1997.

  Telephone service has been terrible. Repeatedly asking a service key, even when I explained that I don't have not one. Repeatedly ask me about Dell computer system I bought it, despite my clear statement that my problem was equipped with a screen of stand-alone and that I was not the owner of a dell computer system. Repeatedly asking me a Dell order number, despite my stating clearly it was not purchased from Dell, but bought new from newegg.com. Repeatedly telling me to contact the seller (newegg) to some how get help as a guarantee of the manufacturer. They told me a serial number was unnecessary because millions of people had bought monitors with this serial number. As if this makes no sense at all. I was told that a product model could be used to find what product I was calling about. I was told no numbers appearing on my device, or on its original packaging (that I kept) could be found in any system. I was transferred to several operators in several services all followed the same scenario and giving the same spiel on the * service tag. Before an operator involved, I've been dishonest and has asked for my phone number. All this despite the pages of Dell support stating clearly that some of their products do not have a key support.

  It does not appear to be process at all to deal with Dell products manufactured and sold without this little number that supposedly so critical. Dell apparently cannot do anything with the model # and # series uses all manufacturers in the world.

  . Exactly how to make contact with the service the customer without a service key.

  And can do something about the dead bug that introduced itself in the center of my screen as a brown spot little? Or am I stuck risking the destruction of my monitor with a canceled warranty? It doesn't make sense that a bug should be frankly worm its way between the layers of the screen.

  Monitors without a number of service purchased from resellers (Amazon, Best Buy, Buy.com, cost Co, Wal-Mart, Sams, other boutique online, eBay, etc.)
  * Based on the start date of monitor 20 digit PPID number code, Dell will guarantee the monitor for 3 years for most monitors. There are exceptions (S2340M, S2340L, etc.) who had only 1 year warranty.
  * You must contact the Support of your country (1-866-618-2044 USA) by telephone. Tell them to open only one internal Dell Oracle knowledge Information Centre
  * In the search space, they should enter PNP13081, and then click search. This opens the article,
  "Replacement for the monitor Dell and procedure policy - political international Dell. They should read scenario 7

  Scenario 7 =.
  Discussion: The customer is unable to provide a Dell order number or monitor the Service tag number. The only information that the client has are the PPID 20 serial numbers for the monitor.
  Warranty: date 3 years from manufacturing monitor integrated in the PPID number 20 digits
  Replacement procedure: Implement the replacement of screen against the dummy tag

  * You would provide the following representative data if you need a replacement monitor in this 3-year period:
  Brick or shop online address and a copy of Bill of sale:
  Monitor model:
  Monitor 20 digits alphanumeric serial number PPID:
  [Your]
  E-mail address:
  Name:
  Shipping address:
  Phone number:
  Operating system:
  Video card:
  Video card ports tested:
  Question:
  Performed troubleshooting:
  Monitor the done Factory Reset
  Watch chess self-test Diagnostics and integrated
  * Post more troubleshooting

• Request preventivo sostituzione card mother server Dell PowerEdge R610

  Buongiorno,

  Abbiamo need di UN preventivo per sostituzione card mother relative al server Dell PowerEdge R610 fuori co Service Tag GGFN25J.

  Restiamo in attesa di una vs cortese risposta.

  Todas

  Alberto Daponte

  IBN Savio Srl

  Buongiorno, the sto contattando via e-mail.

• Windows xp professional compatibility with card mother i5 to intel

  Hello
  I want to upgrade my pc to the card mother i5 intel. Windows xp professional compatible?

  Yes, but in order to be check secure web site of technical support from the manufacturer of the motherboard for Windows XP device drivers. If the drivers are available for download, then you know for sure that XP is compatible.

  If you have the original version of XP or a CD with a Service Pack (1 or 2) earlty, it allows to upgrade the CD with Service Pack 3 "slipstreaming".

  How to create a Windows XP SP3 slipstreamed CD
  http://www.PAGESTART.com/slipstreamsp3.html

  J W Stuart: http://www.pagestart.com

• the upgrade card mother DM3-Pavilion

  Hello

  My 4 year Pavilion dm3, recently died on me. It's a little elegant machine, I wanted to wear around and who was always OK for occasional daily tasks. For these reasons and others, I would at least try to replace the defective motherboard and revive.

  The model I bought is a dm3-1003tx exotic model (bought in Thailand, especially with a keyboard QWERTY/thai), with Intel SU7300 and discrete nVidia GeForce G 105 M graphics chip.

  Given that the original motherboard is not easy to find (PN 584079-001, only a couple of bids on ebay of the Japan), can someone tell me:

  -If it's OK to replace it with an another based SU7300 of motherboard (can be with or without the nvidia chip - I really don't need it).

  -or even better upgrade to a motherboard of SP9300 based to get a performance gain? If so, should I expect any change (it looks that the consumption of energy and the frequency of the buses are higher with the SP9300 then maybe RAM...?)

  Is there any tool available around compatible HP part numbers?

  Thank you

  No, there is not a matrix of cross, useful reference because it would be. I think that HP is simply too many different models and parts for someone to keep track of it all. HP Service is inspired by replacement with the same part number so their internal service people wouldn't even have much use for such a thing, just us end users.

  Motherboards have the processor soldered to the and there is only a single part number for the fan/radiator Intel stated so I would say that if you replace your motherboard with it:

  580663 001

  with the SP9300, you'll be able to reuse your fan/radiator. In the case where you don't have it here is the repair:

  Manual

  All models use the DDR2-800 memory and accept up to 8 GB. Different motherboards all seem to have the same ports and such and will have the same anchor points. You could even theoretically install a card mother AMD-based, but this would require to reinstall an operating system, and I wouldn't trade an Intel processor for an AMD processor in any case unless AMD have been much cheaper. A Committee from AMD would also require a different radiator, however.

  You can buy the SP9300 motherboard for $45 shipped on eBay:

  http://www.eBay.com/ITM/580663-001-HP-Compaq-motherboard-Pavilion-dm3-Intel-laptop-W-SP9300-CPU-581467-0-/400445142883?PT=motherboards&hash=item5d3c63f763

  The same seller also has the SU7300 for a few dollars less:

  http://www.eBay.com/ITM/584078-001-HP-dm3-1000-laptop-motherboard-w-Intel-SU7300-1-3GHz-CPU-/400600978029?PT=motherboards&hash=item5d45add26d

  I bought a little of this seller and it looks like they have a lot of them on the spot so must have dismantled a certain dm3s. Maybe if you call them they can steer you in a way or another based on real practical experience. I confess that I have the opportunity to work on this exact model.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• 'Need permission to use microsoft online services' cannot open a session!

  That's what I get by trying to connect to msn or hotmail:

  You need permission to use Microsoft online services.

  Before you can log in and use Microsoft online services, a parent must give you permission. You can get permission right now by asking your parents to come to the computer. Or, you can send an e-mail asking their permission to your parents.

  • I'm an adult. Why I see this page?

  After your mother gives you permission, you can sign in with your new e-mail address, * address email is removed from the privacy *.

  Parent: To give or deny your child to sign in and use Microsoft online services, click Get Permission Now.

   

    

  If I click on "I am an adult" it shows date of birth can be a problem but I can't check and it also asks that the credit card age verification? !!  Thanks for your help!
  

  Hi Kopatch,

  See the links below to learn more about the cause.

  Any age-based consent
  http://help.MSN.com/ (cHJvamVjdD1wYXNzcG9ydDQmbWFya2V0PWVuLXVz)/Help.aspx?market=en-US&project=Passport4&querytype=topic&query=Accountv1_CONC_AboutAgeBasedConsent.htm

  Right to a request to create a Windows Live ID a child
  http://help.MSN.com/ (cHJvamVjdD1wYXNzcG9ydDQmbWFya2V0PWVuLXVz)/help.aspx?querytype=topic&query=accountv1_proc_addchild.htm

  http://windowslivehelp.com/community/p/146423/531050.aspx

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Help with the new card mother and Vista problem?

  So yes, I got a new card mother and cpu, it seems to work fine except the loading of windows! I said to reinstall vista, however, my computer never came with a vista CD, it was already installed. all I have is restoring 3 DVD. What I could find on the internet is a: A: I need to spend money for a BONE

  b: use linux

  work of the restore cd to reinstall the OS, so I can use my new motherboard?

  So yes, I got a new card mother and cpu, it seems to work fine except the loading of windows! I said to reinstall vista, however, my computer never came with a vista CD, it was already installed. all I have is restoring 3 DVD. What I could find on the internet is a: A: I need to spend money for a BONE

  b: use linux

  work of the restore cd to reinstall the OS, so I can use my new motherboard?

  Hey icuhavoc

  are recovery disks to reinstall vista with the original hardware installed if I understand you correctly know what records you need to know a set of manufacturer's recovery disks

  If it is pre-installed this is an oem license and does not change unless you did it in consultation with the manufacturer of models of motherboards and processors

  Walter, the time zone traveller

• sequence of the RAM on the card mother dx58m01

  I have a dell xps 435mt core i7 920 with a studio card mother dx58m01. There is 6gig ram. 6x1024mb glue 1066 mhz. I want to change ram at 3x2gig sticks memory triple channel 1600 mhz. does anyone know the sequence of installation for this configuration. I currently at 1,3,5. It seems to run pretty slow however. Thank you guys

  Contact Support technique Dell http://support.dell.com/support/topics/global.aspx/support/dellcare/contact_technical_support?c=us&cs=19&l=en&s=dhs& ~ ck = anavml and give them your express service code and/or your product tag so that they can identify your specific machine.  Are all devices that are identical except for the new chips?  Then they should be able to tell the order to use because they know a lot more about their systems we do.  We could just guess they know.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Dell desktop computer just ran scan & system - failure of the card mother how fix this?

  Hi, I have a Dell desktop computer that came with an Epson printer & all the other necessary things: keyboard, mouse, speakers, & flat screen.  I bought it in 2009.  I'm on social security, so I can't afford to buy a warranty with Dell, which missed.  My system works fine.  Dell offers, free of charge, a scan to check the memory card mother and other issues.  I do the scan every month.   It was record past in all categories.

  However, I just did a scan on July 6, 2013 and the analysis of response of the system said failure in red.  Then he said: 'mother' I know refers to the hard drive.  I am over 65 and fairly low tech & live alone.  However, I am pretty savvy, computer or as much as I can be.

  I checked the help MSN menu, but could not follow him.  This is why I post my question on the MSN Community forum, which helped me with other problems in the past.  I have also just posted on the Dell forums.  I have MSN as my homepage & use IE 9, it works best for me.  The only email I have is on AOL and I've been there for years without any problem.

  I have Verizon FIOS; If I can't get an idea of how this problem on the forums (in fact, I prefer MSN forums) I'll call them.  They offer free advice by telephone.  If necessary, they will come to my apartment to check my system & require a rate SIGNIFICANTLY lower than the Geek Squad.

  However, I did not do anything to the system.  I have update printer drivers, since the printer has suddenly stopped working when I replaced the cartridges.  I don't think that this should be a problem.  I replaced the cartridges before.  I have an Epson Stylus NX110 printer/scanner/copier & called Epson, they SUCK.  The printer comes with the computer.  I have installed new drivers & the printer works fine.  I do not have a wireless system, & I don't have a digital camera.  The only other conflict can be I have two Microsoft Security Essentials AND free AVG downloaded as my anti-virus, anti-spyware.

  I know that the new drivers, I installed the printer were great, it was an update of Epson which I figured out.  I as well need the computer & printer. I am disabled & only at home much & this is my link with the outside world.  I do a little writing & letters print & printing (Yes, postal mail) to friends & also letters to additional government assistance of my State & County.  I appreciate all the advice and I'm sorry it's so long.

  One last thing: I keep getting pop-ups from this survey company called five votes.  I have tried everything to remove them, but they reappear.  I do not take surveys & I get rid of pop-ups.  I have my Blocker on MSN and AOL.  Could these pop-ups have corrupted my hard drive? I've been doing them for months, it is very likely.

  Thank you, Karen

  Hi, I have a Dell desktop computer that came with an Epson printer & all the other necessary things: keyboard, mouse, speakers, & flat screen.  I bought it in 2009.  I'm on social security, so I can't afford to buy a warranty with Dell, which missed.  My system works fine.  Dell offers, free of charge, a scan to check the memory card mother and other issues.  I do the scan every month.   It was record past in all categories.

  However, I just did a scan on July 6, 2013 and the analysis of response of the system said failure in red.  Then he said: 'mother' I know refers to the hard drive.  I am over 65 and fairly low tech & live alone.  However, I am pretty savvy, computer or as much as I can be.

  I checked the help MSN menu, but could not follow him.  This is why I post my question on the MSN Community forum, which helped me with other problems in the past.  I have also just posted on the Dell forums.  I have MSN as my homepage & use IE 9, it works best for me.  The only email I have is on AOL and I've been there for years without any problem.

  I have Verizon FIOS; If I can't get an idea of how this problem on the forums (in fact, I prefer MSN forums) I'll call them.  They offer free advice by telephone.  If necessary, they will come to my apartment to check my system & require a rate SIGNIFICANTLY lower than the Geek Squad.

  However, I did not do anything to the system.  I have update printer drivers, since the printer has suddenly stopped working when I replaced the cartridges.  I don't think that this should be a problem.  I replaced the cartridges before.  I have an Epson Stylus NX110 printer/scanner/copier & called Epson, they SUCK.  The printer comes with the computer.  I have installed new drivers & the printer works fine.  I do not have a wireless system, & I don't have a digital camera.  The only other conflict can be I have two Microsoft Security Essentials AND free AVG downloaded as my anti-virus, anti-spyware.

  I know that the new drivers, I installed the printer were great, it was an update of Epson which I figured out.  I as well need the computer & printer. I am disabled & only at home much & this is my link with the outside world.  I do a little writing & letters print & printing (Yes, postal mail) to friends & also letters to additional government assistance of my State & County.  I appreciate all the advice and I'm sorry it's so long.

  One last thing: I keep getting pop-ups from this survey company called five votes.  I have tried everything to remove them, but they reappear.  I do not take surveys & I get rid of pop-ups.  I have my Blocker on MSN and AOL.  Could these pop-ups have corrupted my hard drive? I've been doing them for months, it is very likely.

  Thank you, Karen

  First of all - the 'motherboard' does not mean 'hard drive '.  This means that the "mother".  :-)  The drive is the storage processors is the brain and everything connects through... the "mother".

    
  Second - why sweep you all the months?  Unless you are having a problem - well - I suggest you not to do so.  Heck - you may see a false positive.  Do you have any indication that you have a hardware failure?
    
  Here's what I suggest:
  (1) stop the execution of this "free scan of Dell.
  (2) ensure that the drivers of motherboard, video card, network device and peripheral chipset audio are later you can get - on the Dell site for your specific Service and operating system combination label (drivers and downloads section, use your service number and put in the operating system you are using.)
  (3) never use Geek Squad.
  (4) what is the "MSN Help Menu?
  (5) choose AN antivirus software - two is misguided and may cause problems.
  (6) run some scans of malware with the details, I will give you right after that...
    

  Regarding AntiVirus - free are very good: Avira, AVG, Avast, UnThreat

  You could spend ~ 60USD during two years of eSET NOD32 AntiVirus (not more - just product AntiVirus) and which would be more worthwhile.

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner. Remove everything it finds.

  Reset.

  The less you have to run all the time, most things you want to run will perform:
  

  Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know using Google (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  For the printer - you have downloaded and installed the form here?
  https://www.Epson.com/cgi-bin/store/support/supDetail.jsp?OID=128284&infoType=downloads&platform=OSF_W_7-64

• card mother p6180t

  The p6180t uses a card mother Eureka3-GL8. I am unable to find the documentation on her that she be named as such or under the designation of its manufacture Pegatron IPIEL-A3.

  Specifically, the motherboard natively supports RAID 0 or any other RAID also. Many motherboards take now support RAID 0 natively, so I was just wondering if the jury of this model also does the same thing.

  I've had this model for sale, 'fully loaded', for a great price! I'm very happy with my purchase, but the documentation is a little weak.

  Thanks for any help.

  Take care

  Tom.

  Hi Hp_user_user,

  Hp_user_user wrote:

  The p6180t uses a card mother Eureka3-GL8. I am unable to find the documentation on her that she be named as such or under the designation of its manufacture Pegatron IPIEL-A3.

  Specifically, the motherboard natively supports RAID 0 or any other RAID also. Many motherboards take now support RAID 0 natively, so I was just wondering if the jury of this model also does the same thing.

  I've had this model for sale, 'fully loaded', for a great price! I'm very happy with my purchase, but the documentation is a little weak.

  Thanks for any help.

  Take care

  Tom.

  Here is a link to the motherboard plug.

  There is no RAID controller embedded on the motherboard. If you want to use the moterboard for a matrix RAID configuration you will need to add a. I suggest to use a PCIe x 1 controller, since you have a property available for it.

  It is regrettable that the motherboard is a Pegatron. In my humble OPINION, they are not the most reliable of motherboards.

  Kind regards

  ERICO