NEED HELP: Ae CS5 Windows cannot open AE CS5.5 created on Mac 10.5

Similar Questions

• "My external hard drive does not appear in Windows Explorer and cannot open 'Help and Support', an error message" Windows cannot open help and Support because a system service is not ongoing.

  Original title:

  Everything was fine until yesterday. Juice now, when I plugged the external HD into the USB port it does not appear in the 'my computer' window. It is recognized by the computer as it is present on the list of the "Disk Clean Up" and it also appears when I click on ' Safe Remove Hardware ' on the taskbar. But if she does not appear in the 'my computer' window I can't work with it or don't even know what it I have arquived in it.

  Trying to find a solution, I realized that same 'information system' to 'System tools' is also not available. Pops up a window saying that "Windows cannot open help and Support because a system service is not ongoing enforcement. " To resolve this problem, start the service named help and Support '. OK, I tried to open 'Help and Support' ' Start Menu ' and the same window appeared again to "not have a system service that runs". I don't know what her soul precisely and I have not the slightest idea of what I need to do to correct this 'disappearance' of Service 'system '. There is nothing without the appearance of HD in the window of thw work? Everything else works fine and the calculation is virus-free. What should I do?

  Hello

  You did changes to the computer, before the show?

  Solution A:

  For the problem with the external drive not appearing is not in Windows Explorer, see the following methods.

  Method 1:

  Check out the following link.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

  http://support.Microsoft.com/kb/925196

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 how to back up and restore the registry in Windows

  Method 2:

  Connect the external hard drive on another USB port and check.

  Solution B:

  For the problem with the help and Support, check if the service is enabled.

  a. click Start, click run. In the Open box, type services.msc and press ENTER.

  b. right-click on the service called Help and Support , and then select Properties.

  c. under the general tab, set the type Startup to Automatic and click Start.

  d. close the services window and check for the issue.

• Help, please! Message «Windows cannot open...» »

  Everytime I try and open a program I get a message saying "Windows cannot open this file...". Windows needs to know what program created it... "I tried to do a system restore, but the same message has popped up...

  Help, please
  Karen

  Please "a plan."

  If you mean that you get this error when you double-click an exe to launch an application, go to http://www.dougknox.com/xp/file_assoc.htm and read the explanations at the top.  Then download and use the EXE File Association Fix and the difficulty of Association LNK (shortcut) file.

• on xp family. Windows cannot open help and support because a system service is not ongoing enforcement.

  Windows cannot open help and support because a system service is not ongoing enforcement. to resolve this problem, start the service called help and support

  lhthomas,

  Welcome to the Microsoft Answers community.

  In doing research, I found this article in which people have found a solution:

  Help and support-Service not started

  I hope this helps.

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error: "Windows cannot open help and Support." "To solve the problem, see Help and support.

  Original title: help & support

  When you try to use help and Support on the start menu, a small window opens saying "Windows cannot open help and Support." To troubleshoot the problem, see Help and support. "It's double Dutch to me. Can someone help, please?

  Hi EdwardBahr,
   
  -Remember to make changes to the computer between the calendar when things worked fine and now?
   
  Try the steps listed in the following article and check, if it helps in fixing the issue:
   
  You cannot open the help and Support Center in Windows XP
  Cannot load help and Support Windows

• need help downloading cs5 in windows 8

  need help downloading cs5 in windows 8

  It does not show the icon to start the program after downloading different parts...

  Adobe products generally do not require a unpackager like winzip and are usually self-extracting.

  Try the click with the right button on the exe and then clicking "Run as Administrator".

  If this fails, fix this screenshot: http://forums.adobe.com/message/4209263#4209263

• When I start my computer I get this error message: Windows cannot open this file: GLBD4EA.tmp

  When I start my computer, I get this error message:

  Windows cannot open this file: GLBD4EA.tmp

  To open this file, Windows needs to know what program you want to use to open it. Windows can go online to look for automatically, or you can manually select from a list of programs installed on your computer.

  What do you do?

  -Use the web service to find the appropriate program
  -Select a program from a list of installed programs

  No selection works for me. I don't know what concerns the .tmp file, or why I need to open it.

  Please help :)

  Hello

   
  Perform the following steps to remove the file from the registry.
  a: type regedit into the search box start and click on enter.
  b: Search now to the following key
  HLKM\SOFTWARE\Microsoft\windows\currentversion\run
   
  then delete the following key
  53E412B3-9907-4F9E-A6DC-D0106D1D72C
   
  Important:  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information
  However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/)
   
  Hope this information helps.

• I get a message saying "Windows cannot open the file...". »

  I had a lot of problems with infections, so I was running many scanning programs.

  After getting my computer almost completely cleaned, I ran the Super Anti-Spyware program.  We find 3 infections, which I'd delete (I don't have no way of knowing that I removed).

  Since then, whenever I try to open a program, or even Windows Update, etc., I get a message saying:

  "Windows cannot open the file.  To open this file, Windows needs to know what kind of program has created.  Windows can go online to search automatically, or you can manually select from a list of programs.

  When I go on the web, I get a lot of options, which are almost free scans that then charge for fixing.  I am also very scared that I can also get another infection from these sites.

  I hope someone can help me solve this problem.

  StanEp

  Yes, each method is a set of measures to try and then go ahead and try each one separate.

  2 method will reset the executable (.exe) extension that will allow you to open programs. It is not clear what exactly you are trying to open so that it can have no effect.

  Keep in mind that the damage caused by malware can be irreversible, in the case of relocations are necessary.

• Displays Windows cannot open .exe and .encre file extensions.

  I just downloaded codecs on a website affiliated to microsoft.  I decided to remove this program and my desktop icons went, including shortcut icons.  Double click on these icons got me the message "Windows cannot open this file".  Then displays a folder on my desktop more Winxp32.  Great, now my whole OS is on the desktop in a folder and I can't open any file.  I have since run REGEDIT. EXE and am waiting for additional help in our community... God bless my friends and what you believe in... ME

  A restore of the system at a time until your problem should solve your problem.  Since you can not click on shortcuts to start programs, you may need to start restoring the system in accordance with the following article:

  "How to start the System Restore tool by using the option of safe mode with the command prompt in Windows XP"
    <>http://support.Microsoft.com/kb/304449 >

  HTH,
  JW

• Get the Error Message When you try to reinstall Vista: Windows cannot open the required file: E:\Sources\install.wim

  I'm trying to reinstall windows vista for the following reasons:

  1. I have SQL Server 2008 installed on my computer.  I deleted some files a long time ago and it screwed something and I couldn't reinstall.
  2. I had partitioned my hard drive for vista half and half SuSE and I deleted who and when I did, I think I deleted another partition - my recovery partition (E:\?).
  3. I need to clean my laptop.

  When I try to start the installation of a disk and I put in my product key, I get the following error:

  Windows cannot open the required file E:\Sources\install.wim.  The file does not exist.  Make suure all files required for installation are available, and restart the installation.  Error code: 0 x 80070002.

  Let me know if you have any ideas how I can fix it.  My next step was to recreate this E directory and download the install.wim file and re start the installation.  I could not find the file install.wim well.

  Rob

  Hi Rob,

  I checked the link you provided.  What you downloaded was just the Vista recovery environment.  You cannot actually re - install Vista with that and if you blew your recovery partition unfortunately you may be out of luck.  You blew your partition containing Vista runs so the SFC will be of no help either.  I wish I had better news for you, but I don't see any way o get on without a Vista DVD.  I have good news for you if.  When you get your HP drive if you have problems with the installation, we will be able to help you with that.

  Take care and let us know if you need assistance when the disc arrives. Locutys of Borg

  Resistance is futile

  If you don't succeed the first time skydiving probably isn't for you!

• WINDOWS cannot OPEN THE FILE D:\Sources\Install.wim REQUIERED. Make sure that all required files for installation aare available and restart the installation. Error code: 0x8007000D,.

  IM TRYING to re - INSTALL WINDOWS VISTA ON MY T-6321 to the front door, BUT WHEN I INSERT THE DISC, AND INSTALL, a MESSAGE APPEARS SAYING: WINDOWS cannot OPEN THE FILE D:\Sources\Install.wim REQUIERED. Make sure that all required files for installation aare available and restart the installation. Error code: 0x8007000D, SHOULD ALL BE ON THE DISCALREADY?

  Hi JRCLNSIN100,

   

  Welcome to Microsoft Answers Forums.

  We would like to get some more information from you to help solve your problem. You better, please answer the following questions.

  ·         What is the disk you use to reinstall?

  ·         Is this a recovery or reinstalling the disc you are using?

  ·         When exactly do you get this error message?

  ·         What is the edition of Windows Vista, you try to install?

  ·         How old is the drive that you are using?

  ·         How are you starting the installation process?

  After researching the error 0x8007000D code is essentially due to file corruption and a problem with the drive itself.

  First check if you have scratches or dust on the disc and clean the surface and try again.

  To check if the disk is wrong, you will need to copy the contents of the DVD to the hard drive and try to install using that.

  To perform a flat installation of Windows Vista, follow these steps.

  Note The hard disk must have at least 3 GB of free space on the disk for the Windows Vista installation files. The hard disk must have at least 15 GB of additional disk space to install Windows Vista. For more information about system requirements for Windows Vista, see the Microsoft Web site at the following address:

  http://www.Microsoft.com/Windows/products/windowsvista/editions/SystemRequirements.mspx

  1. Insert the Windows Vista installation disc.
  2. Start Windows Explorer.
  3. In Windows Explorer, click to select the drive for the Windows Vista installation disc.
  4. On the Edit menu, click select all.
  5. On the Edit menu, click copy.
  6. Click to select the hard disk you want to contain the flat installation files.
  7. On the file menu, point to new, click the folder, type Windows Vista Setupand then press ENTER.
  8. Double-click the Windows Vista Setup program, and then click Paste on the Edit menu.
  9. Double-click Setup.exe, and then follow the instructions that appear.

  See the link below for more information on flat installation.

  How to perform a flat installation of Windows Vista

  http://support.Microsoft.com/kb/928902

  This problem can also occur if the firmware of the DVD drive is defective or obsolete.

  If the step above does not resolve the question suggests that you install the latest drivers for the DVD player on the computer.

  For more information please visit the link below.

  Error message when you try to install Windows Vista by using the DVD drive on the computer: "Windows cannot install required files".

  http://support.Microsoft.com/kb/930984

  Hope this information is useful.

  Let me know if it worked.

  All the best!

  Thanks and greetings

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Word or excel file does not open on gives Vista error: windows cannot open c:\users... Make sure you typed the name correctly and try again.

  Word or excel file does not open on gives Vista error: windows cannot open c:\users... Make sure you typed the name correctly and try again.

  Whenever I click on a word or document it opens excel excel but it gives an error message: windows cannot open c:\users... Make sure you typed the name correctly and try again.

  I can open the document that after selecting the file only in excel or word blank document by clicking on the windows logo & choose the file and click on open.

  I need immediate assistance. I tried windows service pack 2 updates, but nothing works. Can anyone help?

  Please repost your question in the Discussion of the Office group at: http://www.microsoft.com/office/community/en-us/default.mspx?dg=microsoft.public.office.misc&lang=en&cr=US where the Word and Excel experts will be more than happy to help you with your problem.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Word or Excel document does not open on Vista. Gives the error: windows cannot open c:\users... Make sure you typed the name correctly, and try him again. __

  Word or excel file does not open on gives Vista error: windows cannot open c:\users... Make sure you typed the name correctly and try again.

  Whenever I click on a word or document it opens excel excel but it gives an error message: windows cannot open c:\users... Make sure you typed the name correctly and try again.

  I can open the document that after selecting the file only in excel or word blank document by clicking on the windows logo & choose the file and click on open.

  I need immediate assistance. I tried windows service pack 2 updates, but nothing works. Can anyone help?

  Please repost your question in the Discussion of the Office group at: http://www.microsoft.com/office/community/en-us/default.mspx?dg=microsoft.public.office.misc&lang=en&cr=US where the Word and Excel experts will be more than happy to help you with your problem.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows cannot open this file .json

  In joomla 2.5.6, when you try to download an image from the file button I get this error message in Internet Explorer 9 - Windows 7 Professional
  : Windows cannot open this file:

  file: .json joomla (3)
  To open this file, Windows needs to know what program you want to use to open it. Windows can go online to look it up automatically, or you can manually select from a list of programs installed on your computer.

  What do you do?

  Use the Web service to find the appropriate program
  Select a program from a list of installed programs.

  If anyone can suggest how I can fix this I would be very happy.

  Thank you

  P.S. This has happened after calling Microsoft this morning and ask for help with another problem with script. The technician who took control of my computer doing something, and since then, nothing works properly!

  Hello

  Method 1
  JSON is a java file. or JavaScript Object Notation, is an open standard based on text designed for the exchange of human readable data. It is derived from the JavaScript scripting language to represent associative arrays, and simple data structures called objects. Despite his relationship with JavaScript, it is independent of the language, with parsers available for many languages.

  If you want to open. You must have Java installed on your computer the JSON file. If you have java installed on the computer I suggest you to try the steps from the following link:

  Change the programs that Windows uses by default
  http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default

  Method 2
  I also suggest to run virus scan online by using the Microsoft safety scanner.

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: when you do an antivirus online, you will lose data that are affected by the virus. Microsoft is not responsible for the loss of this data.

• Click on the link-get "Windows cannot open the file" select a program?

  After clicking on link get "Windows cannot open this file" have to manually "selecta program programs installed" Firefox appears as a choice and I double-click. How can I solve this problem / eliminate these extra steps
  ? Thank you Joe
  I am running Windows XP, MS office Outlook 2007

  Is it a link in an e-mail message in Outlook? This problem arises from time to time.

  While Firefox can usually set himself as the proper application to open the URL, you click in other programs, settings are sometimes blur or do not take. This article has tips to solve this problem: setting Firefox as the default browser does not work - what to do. Anything there help?

  If the problem persists, is there something special about how you start Firefox? For example, you have this launch in a security 'sandbox' or virtual machine? You have all the command-line options set to allow several simultaneous sessions of Firefox, or call the Profile Manager? If none of this sounds familiar to you, the answer is probably not.

• need help with my window is in thai and I do not understand to all.how to convert to English?

  need help with my window is in thai and I don't quite understand.
  How to convert to English? I tried for days but still it cannot be changed.
  because I can't read thai... Please help me step by step...

  my pc is touchsmart 9100 windows 7 Professional.

  Not a single word is in English if I go to the "region and language" to change.

  Everthing is in thai in the system.

  Hello

  Where have you bought the PC?

  What is the operating system installed?

  Best regards

  ERICO